Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 218

Reformat results as: short short into frame detailed detailed into frame

_id	b04c
authors	Goerger, S., Darken, R., Boyd, M., Gagnon, T., Liles, S., Sullivan, J. and Lawson, J.
year	1996
title	Spatial Knowledge Acquisition from Maps and Virtual Environments in Complex Architectural Space
source	Proc. 16 th Applied Behavioral Sciences Symposium, 22-23 April, U.S. Airforce Academy, Colorado Springs, CO., 1996, 6-10
summary	It has often been suggested that due to its inherent spatial nature, a virtual environment (VE) might be a powerful tool for spatial knowledge acquisition of a real environment, as opposed to the use of maps or some other two-dimensional, symbolic medium. While interesting from a psychological point of view, a study of the use of a VE in lieu of a map seems nonsensical from a practical point of view. Why would the use of a VE preclude the use of a map? The more interesting investigation would be of the value added of the VE when used with a map. If the VE could be shown to substantially improve navigation performance, then there might be a case for its use as a training tool. If not, then we have to assume that maps continue to be the best spatial knowledge acquisition tool available. An experiment was conducted at the Naval Postgraduate School to determine if the use of an interactive, three-dimensional virtual environment would enhance spatial knowledge acquisition of a complex architectural space when used in conjunction with floor plan diagrams. There has been significant interest in this research area of late. Witmer, Bailey, and Knerr (1995) showed that a VE was useful in acquiring route knowledge of a complex building. Route knowledge is defined as the procedural knowledge required to successfully traverse paths between distant locations (Golledge, 1991). Configurational (or survey) knowledge is the highest level of spatial knowledge and represents a map-like internal encoding of the environment (Thorndyke, 1980). The Witmer study could not confirm if configurational knowledge was being acquired. Also, no comparison was made to a map-only condition, which we felt is the most obvious alternative. Comparisons were made only to a real world condition and a symbolic condition where the route is presented verbally.
series	other
last changed	2003/04/23 15:50

_id	a6d4
authors	Krueger, Myron W.
year	1991
title	Artificial Reality II
source	Reading, Massachusetts: Addison-Wesley Publishing. 2nd.ed.
summary	The focus of Myron Krueger in Artificial Reality II is the interaction between humans and machines, both in the immediate interface and the associated cultural relationships. He uses the concept of artificial reality as a medium of experience and as a tool to examine the relationships between people and machines. When he first coined the term in the mid-1970s, his 'goal was full-body participation in computer events that were so compelling that they would be accepted as real experience.' He wanted to create an artificial reality that would perceive human actions in a simulated world of sight, sounds, and other sensations and would make the experience of this illusion convincing. His focus was to create unencumbered, artificial realities where the humans could participate with their entire body without wearing any special instruments (be they sensors or displays) in an experience created by the computer. The environment could be controlled by preexisting programs, or could have operators intervene and use the computer to amplify their ability to interact with people. The intention was not to reproduce conventional reality but to create synthetic realities.
series	other
last changed	2003/04/23 15:14

_id	098a
authors	Perron, Richard and Miller, Deron
year	1991
title	Landscape of the Mind
doi	https://doi.org/10.52842/conf.acadia.1991.071
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 71-86
summary	The focus of this article is the exploration of landscape and the question of representation, more specifically how landscape principles can be represented through computation. It is a quest for essential qualities, through an application of philosophical questioning, and a response to a human perception of reality. Reality, as an invention of the human mind, is often thought of as a set of accepted conventions and constructs. Such a reality has an inherent dependency upon cognition where spatial and temporal principles may be defined within the natural and built environment, and further embraced within a cultural context. However, there also exist rules or relations that are neither invented nor formulated by the participants understanding. In effect these relations may not have been effectively articulated, a result perhaps of unfamiliar cues. Therefore, to the participant, these relations reside in the realm of the unknown or even the mystic. The aesthetic often resides in the realm of the mystic. The discovery of the aesthetic, is often an experience that comes from encountering physical and essential beauty where it has been produced through unconscious relations, perceived, yet transcending human understanding. The aspects of space and time, spatial and temporal properties and relations of things and events, are generally accepted conventions. Yet, the existence of a time order, is often not perceived. An understanding of spatial temporal properties may involve a temporal detachment from convention, allowing the release of previously unknown patterns and relations. Virtual realities are well constructed simulations of our environments, yet they may lack the embedded essential qualities of place. Virtual reality should transcend human perception and traditional modes of understanding, and most importantly our limited notions of the temporal nature of our environment. A desire to reach beyond the limits of perceived time order, may take us beyond existing sets of cultural values, and lead to the realization of new spatial/temporal conventions with the assistance of the computer.
series	ACADIA
last changed	2022/06/07 08:00

_id	58cd
authors	Schnoedt, Heinrich
year	1991
title	Cultural Parametrics
doi	https://doi.org/10.52842/conf.acadia.1991.223
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 223-234
summary	The human desire for automation of repetitive processes offers opportunities for the employment of binary computing for these procedures. Architecture and the design of buildings is no exception. With an increase in industrial prefabrication of moderately variable building components, the focus of the practising architect shifts from the individual design process toward a selection process of parts or components with a defined parametric extent. While this concept of parameterized parts has been used by architects since the first repetitive part was available, the advent of modern CAAD systems, with a growing number of parametric components and parts already integrated, is likely to greatly amplify the impact of predefined parts on buildings. Both industry and research institutions continue to make a great effort to utilize building codes and organizational structures as the basis to develop sophisticated algorithms of rule based design. Their purpose of the parameterization of parts or concepts is twofold: to reduce the time frame of human labor on the design of pieces and concepts which are considered repetitive,. and, to install a control mechanism to eliminate mistakes which lay outside of the parametric framework. The implementation of these algorithms in architectural practice and in the educational environment suggests consequences on many levels. In the following, an attempt is made to cast some light on the history of parametrics in respect to computing and the problems associated with a predominantly numerically encoded parametric approach.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2c7b
authors	Stenvert, Ronald
year	1993
title	The Vector-drawing as a Means to Unravel Architectural Communication in the Past
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q9a
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Unlike in painting, in architecture one single person never controls the whole process between conception and realization of a building. Ideas of what the building will eventually look like, have to be conveyed from patron to the actual builders, by way of drawings. Generally the architect is the key-figure in this process of communication of visual ideas. Nowadays many architects design their new buildings by using computers and Computer-Aided (Architectural) Design programs like AutoCad and VersaCAD. Just like traditional drawings, all these computer drawings are in fact vector-drawings; a collection of geometrical primitives like lines, circle segments etc. identified by the coordinates of their end points. Vector-based computer programs can not only be used to design the future, but also as a means to unravel the architectural communication in the past. However, using the computer as an analyzing tool for a better comprehension of the past is not as simple as it seems. Historical data from the past are governed by unique features of date and place. The complexity of the past combined with the straightforwardness of the computer requires a pragmatic and basic approach in which the computer acts as a catalytic agent, enabling the scholar to arrive manually at his own - computer-assisted - conclusions. From this it turns out that only a limited number of projects of a morphological kind are suited to contribute to new knowledge, acquired by the close-reading of the information gained by way of meaningful abstraction. An important problem in this respect is how to obtain the right kind of architectural information. All four major elements of the building process - architect, design, drawing and realization - have their own different and gradually shifting interpretations in the past. This goes especially for the run-of-the-mill architecture which makes up the larger part of the historical urban environment. Starting with the architect, one has to realize that only a very limited part of mainstream architecture was designed by architects. In almost all other cases the role of the patron and the actual builder exceeds that of the architect, even to the extent that they designed buildings themselves. The position of design and drawing as means of communication also changed in the past. Until the middle of the nineteenth century drawings were not the chief means of communication between architects and builders, who got the gist of the design from a model, or, encountering problems, simply asked the architect or supervisor. From the nineteenth century onwards the use of drawings became more common, but almost never represented the building entirely "as built". In 1991 I published my Ph.D. thesis: Constructing the past: computerassisted architectural-historical research: the application of image-processing using the computer and Computer-Aided Design for the study of the urban environment, illustrated by the use of treatises in seventeenth-century architecture (Utrecht 1991). Here, a reconstruction of this historical communication process will be presented on the basis of a project studying the use of the Classical orders as prescribed in various architectural treatises, compared to the use of the orders in a specific group of still existing buildings in The Netherlands dating from the late sixteenth and entire seventeenth century. Comparisons were made by using vector-drawings. Both the illustrations in the the treatises and actual buildings were "translated" into computer-drawings and then analyzed.
series	eCAADe
last changed	2022/06/07 07:50

_id	f9bd
authors	Amor, R.W.
year	1991
title	ICAtect: Integrating Design Tools for Preliminary Architectural Design
source	Wellington, New Zealand: Computer Science Department, Victoria University
summary	ICAtect is a knowledge based system that provides an interface between expert systems, simulation packages and CAD systems used for preliminary architectural design. This thesis describes its structure and development.The principal work discussed in this thesis involves the formulation of a method for representing a building. This is developed through an examination of a number of design tools used in architectural design, and the ways in which each of these describe a building.Methods of enabling data to be transferred between design tools are explored. A Common Building Model (CBM), forming the core of the ICAtect system, is developed to represent the design tools knowledge of a building. This model covers the range of knowledge required by a large set of disparate design tools used by architects at the initial design stage.Standard methods of integrating information from the tools were examined, but required augmentation to encompass the unusual constraints found in some of the design tools. The integration of the design tools and the CBM is discussed in detail, with example methods developed for each type of design tool. These example methods provide a successful way of moving information between the different representations. Some problems with mapping data between very different representations were encountered in this process, and the solutions or ideas for remedies are detailed. A model for control and use of ICAtect is developed in the thesis, and the extensions to enable a graphical user interface are discussed.The methods developed in this thesis demonstrate the feasibility of an integrated system of this nature, while the discussion of future work indicates the scope and potential power of ICAtect.
series	other
last changed	2003/04/23 15:14

_id	22d6
authors	Ballheim, F. and Leppert, J.
year	1991
title	Architecture with Machines, Principles and Examples of CAAD-Education at the Technische Universität München
doi	https://doi.org/10.52842/conf.ecaade.1991.x.h3w
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	"Design tools affect the results of the design process" - this is the starting point of our considerations about the efficient use of CAAD within architecture. To give you a short overview about what we want to say with this thesis lets have a short - an surely incomplete - trip through the fourth dimension back into the early time of civil engineering. As CAD in our faculty is integrated in the "Lehrstuhl für Hochbaustatik und Tragwerksplanung" (if we try to say it in English it would approximately be "institute of structural design"), we chose an example we are very familiar with because of its mathematical background - the cone sections: Circle, ellipse, parabola and hyperbola. If we start our trip two thousand years ago we only find the circle - or in very few cases the ellipse - in their use for the ground plan of greek or roman theaters - if you think of Greek amphitheaters or the Colosseum in Rome - or for the design of the cross section of a building - for example the Pantheon, roman aqueducts or bridges. With the rediscovery of the perspective during the Renaissance the handling of the ellipse was brought to perfection. May be the most famous example is the Capitol in Rome designed by Michelangelo Buonarotti with its elliptical ground plan that looks like a circle if the visitor comes up the famous stairway. During the following centuries - caused by the further development of the natural sciences and the use of new construction materials, i.e. cast-iron, steel or concrete - new design ideas could be realized. With the growing influence of mathematics on the design of buildings we got the division into two professions: Civil engineering and architecture. To the regret of the architects the most innovative constructions were designed by civil engineers, e.g. the early iron bridges in Britain or the famous bridges of Robert Maillard. Nowadays we are in the situation that we try to reintegrate the divided professions. We will return to that point later discussing possible solutions of this problem. But let us continue our 'historical survey demonstrating the state of the art we have today. As the logical consequence of the parabolic and hyperbolic arcs the hyperbolic parabolic shells were developed using traditional design techniques like models and orthogonal sections. Now we reach the point where the question comes up whether complex structures can be completely described by using traditional methods. A question that can be answered by "no" if we take the final step to the completely irregular geometry of cable- net-constructions or deconstructivistic designs. What we see - and what seems to support our thesis of the connection between design tools and the results of the design process - is, that on the one hand new tools enabled the designer to realize new ideas and on the other hand new ideas affected the development of new tools to realize them.
series	eCAADe
more	http://www.mediatecture.at/ecaade/91/ballheim_leppert.pdf
last changed	2022/06/07 07:50

_id	019c
authors	Beyer, Horst A. and Streilein, André
year	1991
title	Data Generation for CAAD with Digital Photogrammetry
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 583-594
summary	The rapid advances in sensor technology and processing hardware make the development of a Digital Photogrammetric System for Architectural Photogrammetry possible. This system is able to acquire images with sufficient resolution for Architectural Photogrammetry. Geometric and topologic information for a CAAD-System can be derived with manual and/or semi-automated methods. This paper describes the current status of such a system which is under development at the Institute of Geodesy and Photogrammetry in cooperation with the Chair of Architecture and CAAD, both at the Swiss Federal Institute of Technology in Zurich.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	792a
authors	Blaschke, Thomas and Tiede, Dirk
year	2003
title	Bridging GIS-based landscape analysis/modelling and 3D-simulation.Is this already 4D?
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	Several studies have used remote sensing to map patterns of e.g. deforestation or to analyse the rates of land use change. Thesestudies have proven useful for interpreting the causes of urbanization, deforestation etc. and the impact of such changes on theregion. Monitoring of change (e.g. deforestation or reforestation) is frequently perceived as one of the most important contributionsof remote sensing technology to the study of global ecological and environmental change (Roughgarden et al. 1991). Manyresearchers believe that the integration of remote sensing techniques within analysis of environmental change is essential if ecologistsare to meet the challenges of the future, specifically issues relating to global change; however, in practice, this integration has so farbeen limited (Griffiths & Mather 2000). Considerable difficulties are encountered in linking, on the one hand, the biologies oforganisms and the ecologies of populations to the fluxes of material and energy quantifiable at the level of ecosystems. In this paper,we concentrate on the methodological aspects of the delineation of landscape objects and touch the ecological application onlysuperficially but we elucidate the potential of the proposed methodology for several ecological applications briefly.
series	other
email
last changed	2003/11/21 15:16

_id	0b1c
authors	Bridges, Alan
year	1991
title	Computer Exercises in Architectural Design Theory
doi	https://doi.org/10.52842/conf.ecaade.1991.x.f9w
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	This paper discusses how architectural theory may be taught using computer based exercises to explore the practical application of those theories. The particular view of architecture developed is, necessarily, a restricted one but the objectives behind the exercises are slightly different to those that a pure architectural theorist or historian might have The formal teaching of architectural theory and composition has not been very fashionable in Schools of Architecture for several years now: indeed there is a considerable inbuilt resistance in students to the application of any form of rules or procedures. There is however a general interest in computing and this can be utilised to advantage. In concentrating on computer applications in design eclectic use has been made of a number of architectural examples ranging from Greek temples to the work of modern deconstructionists. Architectural theory since Vitruvius is littered with attempts to define universal theories of design and this paper certainly does not presume to anything so grand: I have merely looked at buildings, compared them and noted what they have in common and how that might relate to computer-aided design. I have ignored completely any sociological, philosophical or phenomenological questions but would readily agree with the criticism that Cartesian rationality is not, on its own, a sufficient base upon which to build a theory of design. However I believe there is merit in articulating design by separating it from other concerns and making it a subject of study in its own right. Work in design research will provide the models and intellectual structures to facilitate discourse about design and might be expected to benefit the development of design skills by providing material that could be formally taught and debated in a way that is removed from the ephemeral "fashionable designer" debate. Of course, some of the ideas discussed here may prove to be equally ephemeral but that does not entirely negate their value.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	8fb9
authors	Bridges, Alan H.
year	1991
title	DAC or Design and Computers
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 65-76
summary	This paper describes the use of simple computer draughting techniques to explore elements of architectural design theory and suggests that this relatively neglected subject could be liberated by computing to once again play an important part in architectural design education.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	ddss2006-hb-487
id	DDSS2006-HB-487
authors	Chien-Tung Chen and Teng-Wen Chang
year	2006
title	1:1 Spatially Augmented Reality Design Environment
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 487-499
summary	With the development of ubiquitous computing (Weiser, 1991), what will become of the traditional media such as pen and sketches, especially in the design education environment? Or what will they be transformed into? In this research, we focus on the interior design process with a particular type of media-1:1 spatially augmented reality design environment (SARDE). In this research, we tried to implement SARDE and have a scenario experiment to check how designers interact with such design media. Furthermore, through this research, we have come to know more about how designers use design media to represent their design dream.
keywords	Design & Decision Support Systems, Spatially Augmented Reality, Architecture Education, and Computer Visualization
series	DDSS
last changed	2006/08/29 12:55

_id	cdb1
authors	Cornick, T., Noble, B. and Hallahan, C.
year	1991
title	The Limitations of Current Working Practices on the Development of Computer Integrating Modelling in Construction
source	computer Integrated Future, CIB W78 Seminar. Calibre, The Netherlands: Eindhoven University of Technology, september, 1991. Unnumbered. includes bibliography
summary	For the construction Industry to improve its processes through the application computer-based systems, traditional working practices must first change to support the integrated control of design and construction. Current manual methods of practice accept the limitations of man to process a wide range of building performance and production information simultaneously. However when these limitations are removed, through the applications of computer systems, the constraints of manual methods need no longer apply. The first generation of computer applications to the Construction Industry merely modelled the divided and sequential processes of manual methods i.e. drafting, specification writing, engineering and quantity calculations, estimating, billing, material ordering data-bases and activity planning. Use of these systems raises expectations that connections within the computer between the processes modelled can actually be made and faster and more integrated information processing be achieved. 'Linking' software is then developed. The end result of this approach was that users were able to produce information faster, present it in an impressive manner but, in reality, no perceived improvement in actual building performance, production economy or efficiency was realized. A current government sponsored Teaching Company Programme with a UK design and build company is addressing the problem of how real economic benefit can be realized through improvement in, amongst other things, their existing computer applications. This work is being carried out by both considering an academic conceptual model of how 'designing for production' can be achieved in computer applications and what is immediately realizable in practice by modelling the integration of a limited number of knowledge domains to which computers are already being applied. i.e. billing from design, estimating and buying. This paper describes each area of work and how they are impacting on each other
keywords	construction, building process, integration
series	CADline
last changed	2003/06/02 13:58

_id	eb51
authors	Coyne, Richard
year	1996
title	CAAD, Curriculum and Controversy
doi	https://doi.org/10.52842/conf.ecaade.1996.121
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 121-130
summary	This paper brings some of the debate within educational theory to bear on CAAD teaching, outlining the contributions of conservatism, critical theory, radical hermeneutics and pragmatism. The paper concludes by recommending that CAAD teaching move away from conservative concepts of teaching, design and technology to integrate it into the studio. In a highly illuminating book on education theory, Shaun Gallagher (1991) outlines four current views on education that correspond to four major positions in contemporary social theory and philosophy. I will extend these categories to a consideration of attitudes to information technology, and the teaching of computing in architecture. These four positions are conservatism, critical theory, radical hermeneutics, and pragmatism. I will show how certain issues cluster around them, how each position provides the focus of various discursive practices, or intellectual conversations in contemporary thinking, and how information technology is caught up in those conversations. These four positions are not "cognitive styles," but vigorously argued domains of debate involving writers such as Gadamer, Habermas and Derrida about the theory of interpretation. The field of interpretation is known as hermeneutics, which is concerned less with epistemology and knowledge than with understanding. Interpretation theory applies to reading texts, interpreting the law, and appreciating art, but also to the application of any practical task, such as making art, drawing, defining and solving problems, and design (Coyne and Snodgrass, 1995). Hermeneutics provides a coherent focus for considering many contemporary issues and many domains of practice. I outline what these positions in education mean in terms of CAAD (computer-aided architectural design) in the curriculum.
series	eCAADe
email
more	http://www.caad.ac.uk/~richard
last changed	2022/06/07 07:56

_id	8570
authors	Danahy, John
year	1991
title	The Computer-Aided Studio Critic: Gaining Control of What We Look At
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 121-138
summary	This paper presents an approach to teaching that put computer resources in the hands of a studio instructor. A design professor or tutor that is expert in the use of the tool. The studio master used the computer to "study" the propositions of students. This was done as an extension of his current teaching practice. The critic used the computer as another tool additional to discussion, pencil and paper, and working models. Computer walk-throughs and visual representations of concepts were used by the professor to convey his interpretation of the work to students. In this model the students did not have to use the computer. The model recognized the years of experience and expensive equipment required to create an adequate representation of a design scheme and view it in the very short time period available during desk critiques. This approach for studio teaching has not been identified and discussed in any depth in recent literature on CAD studio teaching. The emphasis of papers presented at CAD conferences has been on how to provide students with better software and skills needed to make effective use of computers in their studio work.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	c1ca
authors	Daru, Roel
year	1991
title	Sketch as Sketch Can - Design Sketching with Imperfect Aids and Sketchpads of the Future
doi	https://doi.org/10.52842/conf.ecaade.1991.x.k1t
source	Experiences with CAAD in Education and Practice [eCAADe Conference Proceedings] Munich (Germany) 17-19 October 1991
summary	Sketching plays a manifold role in design and design education now as much as it did in the computerless days. Design sketching is indispensable during the early phases of the architectural design process. But if we ask architects and design educators alike what they are doing with computers, idea sketching is the least mentioned answer if not left out entirely. It is not because they are computer-illiterates, as the computer industry would tend to imply, but because their computers are not offering an adequate environment for design sketching. In education this means that those trying to create computeraided design sketching courses are confronted with the choice of either working with imperfect tools, or waiting for better tools. But by exploring the possibilities in available surrogates we will build the necessary experiences for specifying what is really useful for idea-sketching. Without such exercises, we will never go beyond the electronic metaphor of the sketchbook with pencil or marker.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	eaca
authors	Davis, L. (ed.)
year	1991
title	Handbook of genetic algorithms
source	Van Nostrand Reinhold, New York
summary	This book sets out to explain what genetic algorithms are and how they can be used to solve real-world problems. The first objective is tackled by the editor, Lawrence Davis. The remainder of the book is turned over to a series of short review articles by a collection of authors, each explaining how genetic algorithms have been applied to problems in their own specific area of interest. The first part of the book introduces the fundamental genetic algorithm (GA), explains how it has traditionally been designed and implemented and shows how the basic technique may be applied to a very simple numerical optimisation problem. The basic technique is then altered and refined in a number of ways, with the effects of each change being measured by comparison against the performance of the original. In this way, the reader is provided with an uncluttered introduction to the technique and learns to appreciate why certain variants of GA have become more popular than others in the scientific community. Davis stresses that the choice of a suitable representation for the problem in hand is a key step in applying the GA, as is the selection of suitable techniques for generating new solutions from old. He is refreshingly open in admitting that much of the business of adapting the GA to specific problems owes more to art than to science. It is nice to see the terminology associated with this subject explained, with the author stressing that much of the field is still an active area of research. Few assumptions are made about the reader's mathematical background. The second part of the book contains thirteen cameo descriptions of how genetic algorithmic techniques have been, or are being, applied to a diverse range of problems. Thus, one group of authors explains how the technique has been used for modelling arms races between neighbouring countries (a non- linear, dynamical system), while another group describes its use in deciding design trade-offs for military aircraft. My own favourite is a rather charming account of how the GA was applied to a series of scheduling problems. Having attempted something of this sort with Simulated Annealing, I found it refreshing to see the authors highlighting some of the problems that they had encountered, rather than sweeping them under the carpet as is so often done in the scientific literature. The editor points out that there are standard GA tools available for either play or serious development work. Two of these (GENESIS and OOGA) are described in a short, third part of the book. As is so often the case nowadays, it is possible to obtain a diskette containing both systems by sending your Visa card details (or $60) to an address in the USA.
series	other
last changed	2003/04/23 15:14

_id	a84c
authors	De Haemer Jr., M., J. and Zyda, M. J.
year	1991
title	Simplification of objects rendered by polygonal approximations
source	Computers and Graphics, 15(2):175-184
summary	Current technology provides a means to obtain sampled data that digitally describes three-dimensional surfaces and objects. Three-dimensional digitizing cameras can be used to obtain sampled data that maps the surface of three dimensional figures and models. Data obtained from such sources enable accurate renderings of the original surface. However, the digitizing process often provides much more data than is needed to accurately recreate the surface or object. In order to use such data in real-time visual simulators, a significant reduction in the data needed to accurately render the sampled surfaces is required. The techniques presented were developed to drastically reduce the number of data points required to depict an object without sacrificing the detail and accuracy inherent in the digitizing process.
series	journal paper
last changed	2003/04/23 15:50

_id	2b39
authors	Duarte, Rovenir Bertola
year	2000
title	O Uso do Computador no Ensino de Projeto: (por) uma Avaliação (Or Use do Computer nonEnsino de Project: (by) uma Avaliaction)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 361-363
summary	The computer approaches to the discipline of project near the fifties, with the idea that all the systems and processes can be object of mathematical simulation. However in the last times, the computers were used more in drawings than in the projects, “CADrafting is uncommon (...) and CADesign is almost nonexistent...” (STEVEN, 1991). At the same time it happened a surprising approach with to architecture schools. It stimulated more methodological approaches, and the subject moved, placing the computer as element transformer. The computers have really been changing the production and generation of documents, but the question is if it has been altering the method or process of elaboration of ideas. After so much search in direction to the computers it is time of thinking what was gotten with them and the problems that accompanies him. The work search to discuss the subjects where the computer influences in the learning and the students’ development.
series	SIGRADI
email
last changed	2016/03/10 09:50

For more results click below: