Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 204

Reformat results as: short short into frame detailed detailed into frame

_id	43
authors	Horacio A. Torres. Lic. Geog. Cesira Morano. Guillermo Tella
year	1998
title	Utilización de un Sig Para la Formulacion de un Diagnostico Socioterritorial de la Ciudad de Buenos Aires (Use of a GIS for the Formulation of a Socio-territorial Diagnostic of the City of Buenos Aires)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 324-331
summary	The use of a GIS to assist the elaboration of a socioterritorial diagnosis of the City of Buenos Aires. This paper is based on the result of two research projects sponsored by the University of Buenos Aires (Project AR01 0 and Project Cl-94). From the beginning of 1998 onwards these results have been applied to the development of a "socio-territorial diagnosis" of the City of Buenos Aires, an applied research project funded by the Government of the City of Buenos Aires and carried out by the Facultad de Arquitectura, Diseho y Urbanismo, Universidad de Buenos Aires (Research Unit: PROHAB). The main goal of the analysis was the identification of the spatial distribution pattern of of the selected variables, directed to the delimitation of "social areas". The facilities provided by the GIS allowed us to perform this task in an exploratory manner. An analysis of the 3405 census tracts of the City of Buenos Aires (the central part of the agglomeration) is presented here. A great number of indices were constructed based on variables of the Argentine National Census of Population and Housing referred to housing conditions, housing type, provision of services, origin of the population, educational level, etc. This paper describes the various steps necessary for the application of a GIS, including the digitizing of the cartographic base and the statistical elaboration of the census information (provided by the INDEC in magnetic medium). A colour cartographic output that can be considered a first approximation of the "social map" of the city in 1991 is presented.
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ecaade2023_281
id	ecaade2023_281
authors	Prokop, Šimon, Kubalík, Jiøí and Kurilla, Lukáš
year	2023
title	Neural Networks for Estimating Wind Pressure on Complex Double-Curved Facades
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 639–647
doi	https://doi.org/10.52842/conf.ecaade.2023.2.639
summary	Due to their complex geometry, it is challenging to assess wind effects on the freeform, double-curved building facades. The traditional building code EN 1991-1-4 (730035) only accounts for basic shapes such as cubes, spheres, and cylinders. Moreover, even though wind tunnel measurements are considered to be more precise than other methods, they are still limited by the number of measurement points that can be taken. This limitation, combined with the time and resources required for the analysis, can limit the ability to fully capture detailed wind effects on the whole complex freeform shape of the building. In this study, we propose the use of neural network models trained to predict wind pressure on complex double-curved facades. The neural network is a powerful data-driven machine learning technique that can, in theory, learn an approximation of any function from data, making it well-suited for this application. Our approach was empirically evaluated using a set of 31 points measured in the wind tunnel on a 3D printed model in 1:300 scale of the real architectural design of a concert hall in Ostrava. The results of this evaluation demonstrate the effectiveness of our neural network method in estimating wind pressures on complex freeform facades.
keywords	wind pressure, double-curved façade, neural network
series	eCAADe
email
last changed	2023/12/10 10:49

_id	df56
authors	Brath, Richard
year	1991
title	Information Architecture
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 63-69
doi	https://doi.org/10.52842/conf.acadia.1991.063
summary	There now exists an identical realm situated in an entirely new context: computer simulation. Information architecture is a meaningful spatial environment. It is created by transforming existing social, cultural and technological computer data through theoretical and technical skills.
series	ACADIA
last changed	2022/06/07 07:54

_id	eb51
authors	Coyne, Richard
year	1996
title	CAAD, Curriculum and Controversy
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 121-130
doi	https://doi.org/10.52842/conf.ecaade.1996.121
summary	This paper brings some of the debate within educational theory to bear on CAAD teaching, outlining the contributions of conservatism, critical theory, radical hermeneutics and pragmatism. The paper concludes by recommending that CAAD teaching move away from conservative concepts of teaching, design and technology to integrate it into the studio. In a highly illuminating book on education theory, Shaun Gallagher (1991) outlines four current views on education that correspond to four major positions in contemporary social theory and philosophy. I will extend these categories to a consideration of attitudes to information technology, and the teaching of computing in architecture. These four positions are conservatism, critical theory, radical hermeneutics, and pragmatism. I will show how certain issues cluster around them, how each position provides the focus of various discursive practices, or intellectual conversations in contemporary thinking, and how information technology is caught up in those conversations. These four positions are not "cognitive styles," but vigorously argued domains of debate involving writers such as Gadamer, Habermas and Derrida about the theory of interpretation. The field of interpretation is known as hermeneutics, which is concerned less with epistemology and knowledge than with understanding. Interpretation theory applies to reading texts, interpreting the law, and appreciating art, but also to the application of any practical task, such as making art, drawing, defining and solving problems, and design (Coyne and Snodgrass, 1995). Hermeneutics provides a coherent focus for considering many contemporary issues and many domains of practice. I outline what these positions in education mean in terms of CAAD (computer-aided architectural design) in the curriculum.
series	eCAADe
email
more	http://www.caad.ac.uk/~richard
last changed	2022/06/07 07:56

_id	2e3b
authors	Kvan, Thomas and Kvan, Erik
year	1997
title	Is Design Really Social
source	Creative Collaboration in Virtual Communities 1997, ed. A. Cicognani. VC'97. Sydney: Key Centre of Design Computing, Department of Architectural and Design Science, University of Sydney, 8 p.
summary	There are many who will readily agree with Mitchell’s assertion that “the most interesting new directions (for computer-aided design) are suggested by the growing convergence of computation and telecommunication. This allows us to treat designing not just as a technical process... but also as a social process.” [Mitchell 1995]. The assumption is that design was a social process until users of computer-aided design systems were distracted into treating it as a merely technical process. Most readers will assume that this convergence must and will lead to increased communication between design participants; that better social interaction leads to be better design. The unspoken assumption appears to be that putting the participants into an environment with maximal communication channels will result in design collaboration. The tools provided; therefore; must permit the best communication and the best social interaction. We think it essential to examine the foundations and assumptions on which software and environments are designed to support collaborative design communication. Of particular interest to us in this paper is the assumption about the “social” nature of design. Early research in computer-assisted design collaborations has jumped immediately into conclusions about communicative models which lead to high-bandwidth video connections as the preferred channel of collaboration. The unstated assumption is that computer-supported design environments are not adequate until they replicate in full the sensation of being physically present in the same space as the other participants (you are not there until you are really there). It is assumed that the real social process of design must include all the signals used to establish and facilitate face-to-face communication; including gestures; body language and all outputs of drawing (e.g. Tang [1991]). In our specification of systems for virtual design communities; are we about to fall into the same traps as drafting systems did?
keywords	CSCW; Virtual Community; Architectural Design; Computer-Aided Design
series	other
email
last changed	2002/11/15 18:29

_id	c12b
authors	Sakr, Yasser H. and Johnson, Robert E.
year	1991
title	Computer-Aided Architectural Design Strategies: One Size Does Not Fit All
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 15-31
doi	https://doi.org/10.52842/conf.acadia.1991.015
summary	The practice of architecture is in the midst of significant change and an increasingly uncertain future. Socio-economic factors external to the profession are forcing firms to develop new strategies for delivering design services. Overlaying these external changes is the uncertainty resulting from the inevitable introduction of information technology, which is only beginning to have an impact on the profession. Some advocates see the emergence of a new form of design firm -the computerized design firm - as an intelligent organization structured around electronic work groups with powerful computation and communications tools (Catalano 1990). On the other hand, many practitioners still see CADD as an expensive technology whose primary result leads to an increase in overhead costs. But some practitioners and researchers (Coyne, 1991) recognize both the potential and, problems that computer-aided design presents to the profession. This research presents a framework for understanding how changing information technology might be appropriately integrated into the design firm. It argues that design is an increasingly diverse enterprise, and that this diversity must be understood in order to effectively integrate information technology. The study is divided into three sections. The first section develops an overview of major social, economic, and structural changes within the profession. The second section discusses two alternative approaches that have been utilized to integrate information technology into firms. The third part presents a framework for understanding how information technology may have an impact on strategies for structuring and organizing architectural firms.
series	ACADIA
last changed	2022/06/07 07:56

_id	c00e
authors	Tolman, F. P. and Kuiper, P.
year	1991
title	Some Integration Requirements for Computer Integrated Building
source	The Computer Integrated Future, CIB W78 Seminar. september, 1991. Unnumbered : ill. includes a short bibliography
summary	Introduction of computer technology in the Building and Construction industries follows a bottom-up approach. Bottom up approaches always lead to (1) communication problems on higher levels -- in this case recognized as 'islands of automation' -- subsequently followed by more recently (2) a plea for integration. Although the word 'integration' quickly became in vogue, it is not clear what it really means and what it is that we are supposed to integrate. Another interesting and pressing question is: 'How to integrate the different integration efforts'? The paper discusses five hierarchical technical levels of integration. Each level is elaborated in some detail. Also the relations between the levels are brought into perspective. Non-technical integration requirements (e.g. social, organizational, or legal) are not discussed
keywords	integration, systems, CAD, building, construction
series	CADline
last changed	2003/06/02 10:24

_id	ca50
authors	Ayrle, Hartmut
year	1991
title	XNET2 - Methodical Design of Local Area Networks in Buildings - An Application of the A4 Intelligent Design Tool
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 443-450
summary	XNET2 is a prototype program, that helps network planners to design Ethernet-conform data-networks for sites and buildings. It is implemented as an example application of the ARMILLA4 Intelligent Design Tool under Knowledge Craft. It is based on a knowledge acquisition phase with experts from DECsite, the network-branch of DEC. The ARMILLA Design Tool is developed on the basis of Fritz Haller's ARMILLA ' a set of geometrical and operational rules for the integration of technical ductwork into a building's construction.
series	CAAD Futures
last changed	2003/11/21 15:16

_id	673a
authors	Fukuda, T., Nagahama, R. and Sasada, T.
year	1997
title	Networked Interactive 3-D design System for Collaboration
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 429-437
doi	https://doi.org/10.52842/conf.caadria.1997.429
summary	The concept of ODE (Open Design Environment) and corresponding system were presented in 1991. Then the new concept of NODE. which is networked version of ODE. was generated to make wide area collaboration in 1994. The aim of our research is to facilitate the collaboration among the various people involved in the design process of an urban or architectural project. This includes various designers and engineers, the client and the citizens who may be affected by such a project. With the new technologies of hyper medium, network, and component architecture, we have developed NODE system and applied in practical use of the collaboration among the various people. This study emphasizes the interactive 3-D design tool of NODE which is able to make realistic and realtime presentation with interactive interface. In recent years, ProjectFolder of NODE system, which is a case including documents, plans, and tools to proceed project., is created in the World Wide Web (WWW) and makes hyper links between a 3-D object and a text, an image. and other digital data.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	diss_hensen
id	diss_hensen
authors	Hensen, J.L.M.
year	1991
title	On the Thermal Interaction of Building Structure and Heating and Ventilating System
source	Eindhoven University of Technology
summary	In this dissertation, developments in the field of building performance evaluation tools are described. The subject of these tools is the thermal interaction of building structure and heating and ventilating system. The employed technique is computer simulation of the integrated, dynamic system comprising the occupants, the building and its heating and ventilating system. With respect to buildings and the heating and ventilating systems which service them, the practical objective is ensuring thermal comfort while using an optimum amount of fuel. While defining the optimum had to be left for other workers, the issue of thermal comfort is addressed here. The conventional theory of thermal comfort in conditions characteristic for dwellings and offices assumes steady-state conditions. Yet thermal conditions in buildings are seldom steady, due to the thermal interaction between building structure, climate, occupancy, and auxiliary systems. A literature rewiew is presented regarding work on thermal comfort specifically undertaken to examine what fluctuations in indoor climate may be acceptable. From the results, assessment criteria are defined. Although its potentials reach beyond the area of Computer Aided Building Design, a description is given of building and plant energy simulation within the context of the CABD field of technology. Following an account of the present state-of-the-art, the choice for starting from an existing energy simulation environment (ESPR) is justified. The main development areas of this software platform - within the present context - are identified as: fluid flow simulation, plant simulation, and their integration with the building side of the overall problem domain. In the field of fluid flow simulation, a fluid flow network simulation module is described. The module is based on the mass balance approach, and may be operated either in standalone mode or from within the integrated building and plant energy simulation system. The program is capable of predicting pressures and mass flows in a user-defined building / plant network comprising nodes (ie building zones, plant components, etc) and connections (ie air leakages, fans, pipes, ducts, etc), when subjected to flow control (eg thermostatic valves) and / or to transient boundary conditions (eg due to wind). The modelling and simulation techniques employed to predict the dynamic behaviour of the heating and ventilating system, are elaborated. The simultaneous approach of the plant and its associated control is described. The present work involved extensions to the ESPR energy simulation environment with respect to robustness of the program, and with respect to additional plant simulation features, supported plant component models and control features. The coupling of fluid flow, plant side energy and mass, and building side energy simulation into one integrated program is described. It is this "modular-simultaneous" technique for the simulation of combined heat and fluid flow in a building / plant context, which enables an integral approach of the thermal interaction of building structure and heating and ventilating system. A multi stage verification and validation methodology is described, and its applicability to the present work is demonstrated by a number of examples addressing each successive step of the methodology. A number of imaginary and real world case studies are described to demonstrate application of the present work both in a modelling orientated context and in a building engineering context. Then the general conclusions of the present work are summarized. Next and finally, there are recommendations towards possible future work in the areas of: theory, user interface, software structure, application, and technology transfer.
series	thesis:PhD
last changed	2003/12/15 14:43

_id	0ed4
authors	Kusama, H., Fukuda, T., Park, J.W. and Sasada, T.
year	1996
title	Networked CAD System for Designer Group
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 153-161
doi	https://doi.org/10.52842/conf.caadria.1996.153
summary	Open Design Environment (ODE), the concept of which was proposed in 1991, is a platform on computers to support synthetic to proceed design. We have applied ODE in practical use of design, design review and presentation to make collaboration by using CG in design participants. Recent linkage between LAN and Wide Area Network, just as the Internet, gave ODE a new progress to make wide area collaboration. It leads to generate the concept of Network ODE (NODE). However, we have found some problems on system to proceed the wide area collaboration by using ODE’s Design Tools. Since they are developed on the specific computer system, they can not correspond to the wide area collaboration on various network environments. As a result, the re-arrangement of design environment and the development of Design Tools are needed, which are rather flexible and general purpose, i.e. independent of machine sort and network adaptive. In this paper, to proceed collaboration in a designer group, how to create the system of NODE is demonstrated with the new Key Technologies of network and CG.
series	CAADRIA
last changed	2022/06/07 07:52

_id	3105
authors	Novak, T.P., Hoffman, D.L., and Yung, Y.-F.
year	1996
title	Modeling the structure of the flow experience
source	INFORMS Marketing Science and the Internet Mini-Conference, MIT
summary	The flow construct (Csikszentmihalyi 1977) has recently been proposed by Hoffman and Novak (1996) as essential to understanding consumer navigation behavior in online environments such as the World Wide Web. Previous researchers (e.g. Csikszentmihalyi 1990; Ghani, Supnick and Rooney 1991; Trevino and Webster 1992; Webster, Trevino and Ryan 1993) have noted that flow is a useful construct for describing more general human-computer interactions. Hoffman and Novak define flow as the state occurring during network navigation which is: 1) characterized by a seamless sequence of responses facilitated by machine interactivity, 2) intrinsically enjoyable, 3) accompanied by a loss of self-consciousness, and 4) selfreinforcing." To experience flow while engaged in an activity, consumers must perceive a balance between their skills and the challenges of the activity, and both their skills and challenges must be above a critical threshold. Hoffman and Novak (1996) propose that flow has a number of positive consequences from a marketing perspective, including increased consumer learning, exploratory behavior, and positive affect."
series	other
last changed	2003/04/23 15:50

_id	b5be
authors	Stok, Leon
year	1991
title	Architectural synthesis and optimization of digital systems
source	Eindhoven University of Technology
summary	High level synthesis means going from an functional specification of a digits-system at the algorithmic level to a register transfer level structure. Different appli-cations will ask for different design styles. Despite this diversity in design styles many tasks in the synthesis will be similar. There is no need to write a new synthesis system for each design style. The best way to go seems a decomposition of the high level synthesis problems in several well defined subproblems. How the problem is decomposed depends heavily on a) the type of network architecture chosen, b) the constraints applied to the design and c) on the functional description itself. From this architecture style, the constraints and the functional description a synthesis scheme can be derived.Once this scheme is fixed, algorithms can be chosen which fit into this scheme and solve the subproblems in a fast and, when possible, optimal way. To support such a synthesis philosophy, a framework is needed in which all design information can be stored in a unique way during the various phases of the design process. This asks for a design data base capable of handling all design information with a formally defined interface to all design tools. This thesis gives a formal way to describe both the functional representation, the register transfer level structure and the controller and the relations between all three of them. Special attention has been paid to the efficient representation of mutual exclusive operations and array accesses. The scheduling and allocation problems are defined as mappings between these formal representations. Both the existing synthesis algorithms and the new algorithms described in this thesis fit into this framework. Three new allocation algorithms are presented in this thesis: an algorithm for optimal register allocation in cyclic data flow graphs, an exact polynomial algorithm to do the module allocation and a new scheme to minimize the number of interconnections during all stages of the data path allocation. Cyclic data flow graphs result from high level behavioral descriptions that contain loops. Algorithms for register allocation in high level synthesis published up till now, only considered loop free data flow graphs, When these algorithms are applied to data flow graphs with loops, unnecessary register transfer operations are introduced. A new algorithm is presented that performs a minimal register allocation and eliminates all superfluous register transfer operations. The problem is reformulated as a multicommodity network flow problem for which very efficient solutions exist. Experiments on a benchmark set have shown that in all test cases all register transfers could be eliminated at no increase in register cost. Only heuristic algorithms appeared in literature to solve the module allocation problem. The module allocation problem is usually defined as a clique cover problem on a so-called module allocation graph. It is shown that, under certain conditions, the module allocation graph belongs to the special class of comparability graphs. A polynomial time algorithm can optimally find a clique cover of such a graph. Even when interconnect weights are taken into account, this can be solved exactly. This problem can be transformed into a maximal cost network flow problem, which can be solved exactly in polynomial time. An algorithm is described which solves the module allocation problem with interconnect weights exactly, with a complexity O(kn2), where n is the number of operations In previous research, interconnection was optimized when the module allocation for the operations and the register allocation for the variables already had been done. However, the amount of multiplexing and interconnect are crucial factors to both the delay and the area of a circuit. A new scheme is presented to minimize the number of interconnections during the data path allocation. This scheme first groups all values based on their read and write times. Values belonging to the same group can share a register file. This minimizes the number of data transfers with different sources and destinations. Secondly, registers are allocated for each group separately. Finally the interconnect allocation is done. During the interconnect allocation, the module allocation is determined. The value grouping is based on edge coloring algorithms providing a sharp upper bound on the number of colors needed two techniques: splitting read and write phases of values and introducing serial (re-)write operations for the same value, make that even more efficient exact edge coloring algorithms can be used. It is shown that when variables are grouped into register files and operations are assigned to modules during the interconnection minimization, significant savings (20%) can be obtained in the number of local interconnections and the amount of global interconnect, at the expense of only slightly more register area.
keywords	Digital Systems; Digital Systems
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ecaade2010_040
id	ecaade2010_040
authors	Akdag, Suzan Girginkaya; Cagdas, Gulen; Guney, Caner
year	2010
title	Analyzing the Changes of Bosphorus Silhouette
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.815-823
doi	https://doi.org/10.52842/conf.ecaade.2010.815
wos	WOS:000340629400087
summary	Due to improving technology and global competition today sky is the only limit for high towers of metropolitan areas. The increase in number of high rise has been ruining the silhouette of cities all over the world like Istanbul, whose identity and image have also been destroyed by skyscrapers dominating the seven slopes on which it was once built. The urbanization in Istanbul has somehow become homogenous and destructive over the topography. Despite of raising debates on the critical issue now and then, no analytical approach has ever been introduced. The research therefore, aims to analyze the change of Bosphorus silhouette caused by the emergence of high rise blocks in Zincirlikuyu-Maslak route since it was defined as a Central Business District and a high rise development area by Bosphorus Conservation Law in 1991. ArcGIS Desktop software and its analyst extensions are used for mapping, analyzing and evaluating the urban development within years. The application is considered to be the initial step for a decision support system which will assist in assigning ground for high rise buildings in Istanbul.
keywords	GIS; Bosphorus; Silhouette analysis; High rise buildings
series	eCAADe
email
last changed	2022/06/07 07:54

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	2f73
authors	Coad, P.and Yourdon, E.
year	1991
title	Object Oriented Analysis
source	2nd. edition, Englewood Cliffs, NJ., Yourdon Press/ Prentice Hall
summary	A step-by-step approach to: defining and communicating system requirements; understanding the application domain in which the user operates; integrating the data and process models; analyzing and specifying systems using self-contained partitioning; gaining leverage through explicit representation of commonality; applying a consistent underlying representation for analysis; and accommodating families of systems.
series	other
last changed	2003/04/23 15:14

_id	a6be
authors	Doyle, J.
year	1991
title	Static and Dynamic Analysis of Structures, with an emphasis on mechanics and computer methods
source	Kluwer Academic Pub., Dordrecht
summary	This book is concerned with the static and dynamic analysis of structures. Specifically, it uses the stiffness formulated matrix methods for use on computers to tackle some of the fundamental problems facing engineers in structural mechanics. This is done by covering the Mechanics of Structures, its rephrasing in terms of the Matrix Methods and then their Computational implementation, all within a cohesive setting. Although the book is designed primarily as a text for use at the upper-graduate and beginning graduate level, many practising structural engineers will find it useful as a reference and self-study guide. Each chapter is supplemented with a collection of pertinent problems that indicate extensions of the theory and the applications. These problems, combined with selected references to relevant literature, can form the basis for further study. The book sets as its goal the treatment of structural dynamics starting with the basic mechanics and going all the way to their implementation on digital computers. Rather than discuss particular commercial packages, Professor Doyle has developed STADYN: a complete (but lean) program to perform each of the standard procedures used in commercial programs. Each module in the program is reasonably complete in itself, and all were written with the sole aim of clarity plus a modicum of efficiency, compactness and elegance.
series	other
last changed	2003/04/23 15:14

_id	6f3e
authors	Eastman, Charles M. and Lang, Jurg
year	1991
title	Experiments in Architectural Design Development Using CAD
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 49-64
summary	The need to explore development techniques in computer-based design is reviewed. Some premises are given for design development using computers, including integrating multiple representations, the use of object-based modeling and the importance of visual analysis and 3-D modeling. We then present techniques used in a UCLA design studio that explored methods of computer-based design development based on these premises. The two main methods used were hierarchical object structures and multi-representational coordination. They were applied using conventional CAD systems. Some lessons learned from this class are reviewed.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	467d
authors	Eastman, Charles M.
year	1991
title	A Data Model Analysis of Modularity and Extensibility in Building Databases
source	February, 1991. Report No. 16: This paper uses data modeling techniques to define how database schemas for an intelligent integrated architectural CAD system can be made extensible. It reviews the product data modeling language EDM, then applies it to define a part of an architectural data model. Extensions are then investigated, regarding how users could integrate various design-specific packages into a uniquely configured system
summary	Both extension by substituting one technology for another and by adding a new evaluation application, are considered. Data modeling allows specification of a CAD database and identification of the kind of modularization that will work and what problems may arise
keywords	database, building, modeling, CAD, integration, systems, architecture, design
series	CADline
email
last changed	2003/05/17 10:15

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

For more results click below: