Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 217

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2010_040
id	ecaade2010_040
authors	Akdag, Suzan Girginkaya; Cagdas, Gulen; Guney, Caner
year	2010
title	Analyzing the Changes of Bosphorus Silhouette
doi	https://doi.org/10.52842/conf.ecaade.2010.815
source	FUTURE CITIES [28th eCAADe Conference Proceedings / ISBN 978-0-9541183-9-6] ETH Zurich (Switzerland) 15-18 September 2010, pp.815-823
summary	Due to improving technology and global competition today sky is the only limit for high towers of metropolitan areas. The increase in number of high rise has been ruining the silhouette of cities all over the world like Istanbul, whose identity and image have also been destroyed by skyscrapers dominating the seven slopes on which it was once built. The urbanization in Istanbul has somehow become homogenous and destructive over the topography. Despite of raising debates on the critical issue now and then, no analytical approach has ever been introduced. The research therefore, aims to analyze the change of Bosphorus silhouette caused by the emergence of high rise blocks in Zincirlikuyu-Maslak route since it was defined as a Central Business District and a high rise development area by Bosphorus Conservation Law in 1991. ArcGIS Desktop software and its analyst extensions are used for mapping, analyzing and evaluating the urban development within years. The application is considered to be the initial step for a decision support system which will assist in assigning ground for high rise buildings in Istanbul.
wos	WOS:000340629400087
keywords	GIS; Bosphorus; Silhouette analysis; High rise buildings
series	eCAADe
email
last changed	2022/06/07 07:54

_id	4eed
authors	Benedickt, Michael (ed.)
year	1991
title	Cyberspace: First Steps
source	The MIT Press, Cambridge, MA and London, UK
summary	Cyberspace has been defined as "an infinite artificial world where humans navigate in information-based space" and as "the ultimate computer-human interface." These original contributions take up the philosophical basis for cyberspace in virtual realities, basic communications principles, ramifications of cyberspace for future workplaces, and more.
series	other
last changed	2003/04/23 15:14

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	eaca
authors	Davis, L. (ed.)
year	1991
title	Handbook of genetic algorithms
source	Van Nostrand Reinhold, New York
summary	This book sets out to explain what genetic algorithms are and how they can be used to solve real-world problems. The first objective is tackled by the editor, Lawrence Davis. The remainder of the book is turned over to a series of short review articles by a collection of authors, each explaining how genetic algorithms have been applied to problems in their own specific area of interest. The first part of the book introduces the fundamental genetic algorithm (GA), explains how it has traditionally been designed and implemented and shows how the basic technique may be applied to a very simple numerical optimisation problem. The basic technique is then altered and refined in a number of ways, with the effects of each change being measured by comparison against the performance of the original. In this way, the reader is provided with an uncluttered introduction to the technique and learns to appreciate why certain variants of GA have become more popular than others in the scientific community. Davis stresses that the choice of a suitable representation for the problem in hand is a key step in applying the GA, as is the selection of suitable techniques for generating new solutions from old. He is refreshingly open in admitting that much of the business of adapting the GA to specific problems owes more to art than to science. It is nice to see the terminology associated with this subject explained, with the author stressing that much of the field is still an active area of research. Few assumptions are made about the reader's mathematical background. The second part of the book contains thirteen cameo descriptions of how genetic algorithmic techniques have been, or are being, applied to a diverse range of problems. Thus, one group of authors explains how the technique has been used for modelling arms races between neighbouring countries (a non- linear, dynamical system), while another group describes its use in deciding design trade-offs for military aircraft. My own favourite is a rather charming account of how the GA was applied to a series of scheduling problems. Having attempted something of this sort with Simulated Annealing, I found it refreshing to see the authors highlighting some of the problems that they had encountered, rather than sweeping them under the carpet as is so often done in the scientific literature. The editor points out that there are standard GA tools available for either play or serious development work. Two of these (GENESIS and OOGA) are described in a short, third part of the book. As is so often the case nowadays, it is possible to obtain a diskette containing both systems by sending your Visa card details (or $60) to an address in the USA.
series	other
last changed	2003/04/23 15:14

_id	caadria2020_231
id	caadria2020_231
authors	Doe, Robert
year	2020
title	sensMOD - Computational Design through the lens of Henri Lefebvre's Spatial Theory
doi	https://doi.org/10.52842/conf.caadria.2020.1.701
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 701-710
summary	Spatial productivity is the first of the elements comprising sensMOD, a student elective that implemented a methodology addressing the exigent need of our time for transformation in the architecture, engineering and construction (AEC) sector. The second and third elements of sensMOD are parts and interaction which focus attention on the nature of complexity and connectivity in our networked world. The paper proposes a methodology that was used to guide the teaching of an elective for third year architecture students at a UK university. Its wider purpose is to contribute to discussion concerning the dysfunctional state of an AEC sector that needs to consider its productivity as projections of wider networks of resource and energy relationships. Henri Lefebvre's spatial theory (1991) guides the narrative and formulation of sensMOD.
keywords	computational design; spatial productivity; modularity; interaction design
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	673a
authors	Fukuda, T., Nagahama, R. and Sasada, T.
year	1997
title	Networked Interactive 3-D design System for Collaboration
doi	https://doi.org/10.52842/conf.caadria.1997.429
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 429-437
summary	The concept of ODE (Open Design Environment) and corresponding system were presented in 1991. Then the new concept of NODE. which is networked version of ODE. was generated to make wide area collaboration in 1994. The aim of our research is to facilitate the collaboration among the various people involved in the design process of an urban or architectural project. This includes various designers and engineers, the client and the citizens who may be affected by such a project. With the new technologies of hyper medium, network, and component architecture, we have developed NODE system and applied in practical use of the collaboration among the various people. This study emphasizes the interactive 3-D design tool of NODE which is able to make realistic and realtime presentation with interactive interface. In recent years, ProjectFolder of NODE system, which is a case including documents, plans, and tools to proceed project., is created in the World Wide Web (WWW) and makes hyper links between a 3-D object and a text, an image. and other digital data.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	c882
authors	Gantz, John
year	1991
title	The Market at Large
source	Computer Graphics World. April, 1991. vol. 14: pp. 27-33 : tables
summary	The computer graphics market has embarked on a long journey that began somewhere in the 1970s and won't end until the turn of the century. As the worldwide economy experiences a recession, deals with war in the Middle East and the restoration of an Eastern Europe market, the graphics market is in great shape to weather anything the economy throws at it. The article discusses the reasons for that
keywords	business, computer graphics
series	CADline
last changed	1999/02/12 15:08

_id	b04c
authors	Goerger, S., Darken, R., Boyd, M., Gagnon, T., Liles, S., Sullivan, J. and Lawson, J.
year	1996
title	Spatial Knowledge Acquisition from Maps and Virtual Environments in Complex Architectural Space
source	Proc. 16 th Applied Behavioral Sciences Symposium, 22-23 April, U.S. Airforce Academy, Colorado Springs, CO., 1996, 6-10
summary	It has often been suggested that due to its inherent spatial nature, a virtual environment (VE) might be a powerful tool for spatial knowledge acquisition of a real environment, as opposed to the use of maps or some other two-dimensional, symbolic medium. While interesting from a psychological point of view, a study of the use of a VE in lieu of a map seems nonsensical from a practical point of view. Why would the use of a VE preclude the use of a map? The more interesting investigation would be of the value added of the VE when used with a map. If the VE could be shown to substantially improve navigation performance, then there might be a case for its use as a training tool. If not, then we have to assume that maps continue to be the best spatial knowledge acquisition tool available. An experiment was conducted at the Naval Postgraduate School to determine if the use of an interactive, three-dimensional virtual environment would enhance spatial knowledge acquisition of a complex architectural space when used in conjunction with floor plan diagrams. There has been significant interest in this research area of late. Witmer, Bailey, and Knerr (1995) showed that a VE was useful in acquiring route knowledge of a complex building. Route knowledge is defined as the procedural knowledge required to successfully traverse paths between distant locations (Golledge, 1991). Configurational (or survey) knowledge is the highest level of spatial knowledge and represents a map-like internal encoding of the environment (Thorndyke, 1980). The Witmer study could not confirm if configurational knowledge was being acquired. Also, no comparison was made to a map-only condition, which we felt is the most obvious alternative. Comparisons were made only to a real world condition and a symbolic condition where the route is presented verbally.
series	other
last changed	2003/04/23 15:50

_id	diss_hensen
id	diss_hensen
authors	Hensen, J.L.M.
year	1991
title	On the Thermal Interaction of Building Structure and Heating and Ventilating System
source	Eindhoven University of Technology
summary	In this dissertation, developments in the field of building performance evaluation tools are described. The subject of these tools is the thermal interaction of building structure and heating and ventilating system. The employed technique is computer simulation of the integrated, dynamic system comprising the occupants, the building and its heating and ventilating system. With respect to buildings and the heating and ventilating systems which service them, the practical objective is ensuring thermal comfort while using an optimum amount of fuel. While defining the optimum had to be left for other workers, the issue of thermal comfort is addressed here. The conventional theory of thermal comfort in conditions characteristic for dwellings and offices assumes steady-state conditions. Yet thermal conditions in buildings are seldom steady, due to the thermal interaction between building structure, climate, occupancy, and auxiliary systems. A literature rewiew is presented regarding work on thermal comfort specifically undertaken to examine what fluctuations in indoor climate may be acceptable. From the results, assessment criteria are defined. Although its potentials reach beyond the area of Computer Aided Building Design, a description is given of building and plant energy simulation within the context of the CABD field of technology. Following an account of the present state-of-the-art, the choice for starting from an existing energy simulation environment (ESPR) is justified. The main development areas of this software platform - within the present context - are identified as: fluid flow simulation, plant simulation, and their integration with the building side of the overall problem domain. In the field of fluid flow simulation, a fluid flow network simulation module is described. The module is based on the mass balance approach, and may be operated either in standalone mode or from within the integrated building and plant energy simulation system. The program is capable of predicting pressures and mass flows in a user-defined building / plant network comprising nodes (ie building zones, plant components, etc) and connections (ie air leakages, fans, pipes, ducts, etc), when subjected to flow control (eg thermostatic valves) and / or to transient boundary conditions (eg due to wind). The modelling and simulation techniques employed to predict the dynamic behaviour of the heating and ventilating system, are elaborated. The simultaneous approach of the plant and its associated control is described. The present work involved extensions to the ESPR energy simulation environment with respect to robustness of the program, and with respect to additional plant simulation features, supported plant component models and control features. The coupling of fluid flow, plant side energy and mass, and building side energy simulation into one integrated program is described. It is this "modular-simultaneous" technique for the simulation of combined heat and fluid flow in a building / plant context, which enables an integral approach of the thermal interaction of building structure and heating and ventilating system. A multi stage verification and validation methodology is described, and its applicability to the present work is demonstrated by a number of examples addressing each successive step of the methodology. A number of imaginary and real world case studies are described to demonstrate application of the present work both in a modelling orientated context and in a building engineering context. Then the general conclusions of the present work are summarized. Next and finally, there are recommendations towards possible future work in the areas of: theory, user interface, software structure, application, and technology transfer.
series	thesis:PhD
last changed	2003/12/15 14:43

_id	a6d4
authors	Krueger, Myron W.
year	1991
title	Artificial Reality II
source	Reading, Massachusetts: Addison-Wesley Publishing. 2nd.ed.
summary	The focus of Myron Krueger in Artificial Reality II is the interaction between humans and machines, both in the immediate interface and the associated cultural relationships. He uses the concept of artificial reality as a medium of experience and as a tool to examine the relationships between people and machines. When he first coined the term in the mid-1970s, his 'goal was full-body participation in computer events that were so compelling that they would be accepted as real experience.' He wanted to create an artificial reality that would perceive human actions in a simulated world of sight, sounds, and other sensations and would make the experience of this illusion convincing. His focus was to create unencumbered, artificial realities where the humans could participate with their entire body without wearing any special instruments (be they sensors or displays) in an experience created by the computer. The environment could be controlled by preexisting programs, or could have operators intervene and use the computer to amplify their ability to interact with people. The intention was not to reproduce conventional reality but to create synthetic realities.
series	other
last changed	2003/04/23 15:14

_id	a113
authors	Milne, Murray
year	1991
title	Design Tools: Future Design Environments for Visualizing Building Performance
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 485-496
summary	In the future of Computer Aided Architectural Design (CAAD), architects clearly need more than just computer aided design and drafting systems (CAD). Unquestionably CAD systems continue to become increasingly powerful, but there is more to designing a good building than its three-dimensional existence, especially in the eyes of all the non-architects of the world: users, owners, contractors, regulators, environmentalists. The ultimate measure of a building's quality has something to do with how well it behaves over time. Predictions about its performance have many different dimensions; how much it costs to build, to operate, and to demolish; how comfortable it is; how effectively people can perform their functions in it; how much energy it uses or wastes. Every year dozens of building performance simulation programs are being written that can predict performance over time along any of these dimensions. That is why the need for both CAD systems and performance predictors can be taken for granted, and why instead it may be more interesting to speculate about the need for 'design tools'. A design tool can be defined as a piece of software that is easy and natural for architects to use, that easily accommodates three-dimensional representations of the building, and that-predicts something useful about a building's performance. There are at least five different components of design tools that will be needed for the design environment of the future.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	a9d7
authors	Mitchell, J.W. and McCullough, M.
year	1991
title	Digital Design Media: A Handbook for Architects and Design Professionals
source	Van Nostrand Reinhold, New York, pp. 421-422
summary	In Digital Design Media architects and related design professionals will find a complete conceptual guide to the multidimensional world of computer-aided design. In contrast to the many books that describe how to use particular programs (and which therefore go out of date very quickly), Digital Design Media constructs a lasting theoretical framework, which will make it easier to understand a great number of programs-existing and future-as a whole. Clear structure, numerous historical references, and hundreds of illustrations make this framework both accessible to the nontechnical professional and broadening for the experienced computer-aided designer. The book will be especially valuable to anyone who is ready to expand their work in CAD beyond production drafting systems. The new second edition adds chapters one merging technologies, such as the Internet, but the book's original content is as valid as ever. Thousands of design students and practitioners have made this book a standard.
series	other
email
last changed	2003/04/23 15:14

_id	f2e8
authors	Norman, Richard B.
year	1991
title	Real and Un-real Color
doi	https://doi.org/10.52842/conf.acadia.1991.045
source	Reality and Virtual Reality [ACADIA Conference Proceedings / ISBN 1-880250-00-4] Los Angeles (California - USA) October 1991, pp. 45-52
summary	Drawings exist for the communication of ideas. They are the containers of mankind's visual dreams and embody all of the hopes, the aspirations, and intentions of their creators. The act of drawing is itself an expression of the desire for a world that is better than what already exists. The appearance of a new drawing media does not change that purpose, it only presents new and stimulating methods of communication, better ways of conveying ideas. In ideal terms the design of a building requires a holistic procedure, one where the entire edifice is created in a single instant. The building must seem totally compete and be universally understood in order that it can be accepted, detailed, structured, and priced. This is of course not possible; there are too many aspects of architecture that are not thought about at the moment of creation. The process of design is continuous and moves from general to specific; any drawing media, to be useful, must accommodate this continuity. Completeness, where complete thought does not exist, cannot be achieved by the pursuit of reality on the computer. There are many unknowns that prohibit the creation of "real" pictures-unless one makes design assumptions that prudent process should not accept.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	3105
authors	Novak, T.P., Hoffman, D.L., and Yung, Y.-F.
year	1996
title	Modeling the structure of the flow experience
source	INFORMS Marketing Science and the Internet Mini-Conference, MIT
summary	The flow construct (Csikszentmihalyi 1977) has recently been proposed by Hoffman and Novak (1996) as essential to understanding consumer navigation behavior in online environments such as the World Wide Web. Previous researchers (e.g. Csikszentmihalyi 1990; Ghani, Supnick and Rooney 1991; Trevino and Webster 1992; Webster, Trevino and Ryan 1993) have noted that flow is a useful construct for describing more general human-computer interactions. Hoffman and Novak define flow as the state occurring during network navigation which is: 1) characterized by a seamless sequence of responses facilitated by machine interactivity, 2) intrinsically enjoyable, 3) accompanied by a loss of self-consciousness, and 4) selfreinforcing." To experience flow while engaged in an activity, consumers must perceive a balance between their skills and the challenges of the activity, and both their skills and challenges must be above a critical threshold. Hoffman and Novak (1996) propose that flow has a number of positive consequences from a marketing perspective, including increased consumer learning, exploratory behavior, and positive affect."
series	other
last changed	2003/04/23 15:50

_id	29c2
authors	Ozel, Filiz
year	1991
title	An Intelligent Simulation Approach in Simulating Dynamic Processes in Architectural Environments
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 177-190
summary	The implications of object-oriented data models and rule-based reasoning systems is being researched in a wide variety of application areas ranging from VLSI circuit design (Afsannanesh et al 1990) to architectural environments (Coyne et al 1990). The potential of this approach in the development of discrete event simulations is also being scrutinized (Birtwistle et al 1986). Such computer models are usually called "expert simulations" or "intelligent simulations". Typically rule-basing in such models allows the definition of intelligent-objects that can reason about the simulated dynamic processes through an inferencing system. The major advantage of this approach over traditional simulation languages is its ability to provide direct reference to real world objects and processes. The simulation of dynamic processes in architectural environments poses an additional Problem of resolving the interaction of architectural objects with other objects such as humans, water, smoke etc., depending on the process simulated. Object-oriented approach promises potential in solving this specific problem. The first part of this paper addresses expert simulation approach within the context of architectural settings, then the second part summarizes work done in the application of such an approach to an emergency egress simulation.
series	CAAD Futures
last changed	1999/04/07 12:03

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2560
authors	Alkhoven, Patricia
year	1991
title	The Reconstruction of the Past: The Application of New Techniques for Visualization and Research in Architectural History
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 549-566
summary	This paper focuses on the visualization of historical architecture. The application of new Computer-Aided- Architectural-Design techniques for visualization on micro computers provides a technique for reconstructing and analyzing architectural objects from the past. The pilot project describes a case study in which the historical transformation of a town will be analyzed by using three- dimensional CAD models in combination with bitmap textures. The transformation of the historic town will be visualized in a space-time computer model in which bitmap textures enable us to display complex and relatively large architectural objects in detail. This three-dimensional descriptive model allows us to survey and analyze the history of architecture in its reconstructed context. It also provides a medium for researching the dynamics of urban management, since new combinations and arrangements with the individual architectural objects can be created. In this way, a new synthesis of the graphic material can reveal typologies and the architectural ordering system of a town.
keywords	3D City modeling
series	CAAD Futures
last changed	2003/11/21 15:15

_id	849b
authors	Amiel, Maurice
year	1991
title	NOTES ON IN-SITU – FULL-SCALE EXPERIMENTATION AND THE DESIGN PROFESSIONS
source	Proceedings of the 3rd European Full-Scale Modelling Conference / ISBN 91-7740044-5 / Lund (Sweden) 13-16 September 1990, pp. 40-43
summary	In the north american academic context a workshop is different from a paper session in that it is simply an opportunity to exchange ideas and to raise questions among colleagues who can bring to bear in their discussion various points of view and experiences otherwise unavailable.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:18

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	f9bd
authors	Amor, R.W.
year	1991
title	ICAtect: Integrating Design Tools for Preliminary Architectural Design
source	Wellington, New Zealand: Computer Science Department, Victoria University
summary	ICAtect is a knowledge based system that provides an interface between expert systems, simulation packages and CAD systems used for preliminary architectural design. This thesis describes its structure and development.The principal work discussed in this thesis involves the formulation of a method for representing a building. This is developed through an examination of a number of design tools used in architectural design, and the ways in which each of these describe a building.Methods of enabling data to be transferred between design tools are explored. A Common Building Model (CBM), forming the core of the ICAtect system, is developed to represent the design tools knowledge of a building. This model covers the range of knowledge required by a large set of disparate design tools used by architects at the initial design stage.Standard methods of integrating information from the tools were examined, but required augmentation to encompass the unusual constraints found in some of the design tools. The integration of the design tools and the CBM is discussed in detail, with example methods developed for each type of design tool. These example methods provide a successful way of moving information between the different representations. Some problems with mapping data between very different representations were encountered in this process, and the solutions or ideas for remedies are detailed. A model for control and use of ICAtect is developed in the thesis, and the extensions to enable a graphical user interface are discussed.The methods developed in this thesis demonstrate the feasibility of an integrated system of this nature, while the discussion of future work indicates the scope and potential power of ICAtect.
series	other
last changed	2003/04/23 15:14

For more results click below: