Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 5 of 5

Reformat results as: short short into frame detailed detailed into frame

_id	91c4
authors	Checkland, P.
year	1981
title	Systems Thinking, Systems Practice
source	John Wiley & Sons, Chichester
summary	Whether by design, accident or merely synchronicity, Checkland appears to have developed a habit of writing seminal publications near the start of each decade which establish the basis and framework for systems methodology research for that decade."" Hamish Rennie, Journal of the Operational Research Society, 1992 Thirty years ago Peter Checkland set out to test whether the Systems Engineering (SE) approach, highly successful in technical problems, could be used by managers coping with the unfolding complexities of organizational life. The straightforward transfer of SE to the broader situations of management was not possible, but by insisting on a combination of systems thinking strongly linked to real-world practice Checkland and his collaborators developed an alternative approach - Soft Systems Methodology (SSM) - which enables managers of all kinds and at any level to deal with the subtleties and confusions of the situations they face. This work established the now accepted distinction between hard systems thinking, in which parts of the world are taken to be systems which can be engineered, and soft systems thinking in which the focus is on making sure the process of inquiry into real-world complexity is itself a system for learning. Systems Thinking, Systems Practice (1981) and Soft Systems Methodology in Action (1990) together with an earlier paper Towards a Systems-based Methodology for Real-World Problem Solving (1972) have long been recognized as classics in the field. Now Peter Checkland has looked back over the three decades of SSM development, brought the account of it up to date, and reflected on the whole evolutionary process which has produced a mature SSM. SSM: A 30-Year Retrospective, here included with Systems Thinking, Systems Practice closes a chapter on what is undoubtedly the most significant single research programme on the use of systems ideas in problem solving. Now retired from full-time university work, Peter Checkland continues his research as a Leverhulme Emeritus Fellow. "
series	other
last changed	2003/04/23 15:14

_id	a93f
authors	Eisenman, P.
year	1992
title	Visions unfolding: architecture in the age of electronic media
source	Domus, 1/92
summary	During the fifty years sinee the Second World War, a paradigm shift has taken place that should have profoundly affected architecture: this was the shift from the mechanicai paradigm to the electrorlic one. This change can be simply understood by comparing the impact of the role of the human subject on such primary modes of reproduction as the photograph and the fax; the photograph within the mechanical paradigm, the fax within the electronic one. In photographic reproduction the subiect still maintains a controlled interaction with the object. A photograph can be developed with more or less contrast, texture or clarity.
series	journal paper
last changed	2003/04/23 15:50

_id	ddss9214
id	ddss9214
authors	Friedman, A.
year	1993
title	A decision-making process for choice of a flexible internal partition option in multi-unit housing using decision theory techniques
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Recent demographic changes have increased the heterogeneity of user groups in the North American housing market. Smaller households (e.g. elderly, single parent) have non-traditional spatial requirements that cannot be accommodated within the conventional house layout. This has created renewed interest in Demountable/Flexible internal partition systems. However, the process by which designers decide which project or user groups are most suited for the use of these systems is quite often complex, non-linear, uncertain and dynamic, since the decisions involve natural processes and human values that are apparently random. The anonymity of users when mass housing projects are conceptualized, and the uncertainty as to the alternative to be selected by the user, given his/her constantly changing needs, are some contributing factors to this effect. Decision Theory techniques, not commonly used by architects, can facilitate the decision-making process through a systematic evaluation of alternatives by means of quantitative methods in order to reduce uncertainty in probabilistic events or in cases when data is insufficient. The author used Decision Theory in the selection of flexible partition systems. The study involved a multi-unit, privately initiated housing project in Montreal, Canada, where real site conditions and costs were used. In this paper, the author outlines the fundamentals of Decision Theory and demonstrates the use of Expected Monetary Value and Weighted Objective Analysis methods and their outcomes in the design of a Montreal housing project. The study showed that Decision Theory can be used as an effective tool in housing design once the designer knows how to collect basic data.
series	DDSS
last changed	2003/08/07 16:36

_id	3b2a
authors	Westin, S., Arvo, J. and Torrance, K.
year	1992
title	Predicting reflectance functions from complex surfaces
source	Computer Graphics, 26(2):255-264, July 1992
summary	We describe a physically-based Monte Carlo technique for approximating bidirectional re•ectance distribution functions (BRDFs) for a large class of geometries by directly simulating optical scattering. The technique is more general than previous analytical models: it removes most restrictions on surface microgeometry. Three main points are described: a new representation of the BRDF, a Monte Carlo technique to estimate the coef•cients of the representation, and the means of creating a milliscale BRDF from microscale scattering events. These allowthe prediction of scattering from essentially arbitrary roughness geometries. The BRDF is concisely represented by a matrix of spherical harmonic coef•cients; the matrix is directly estimated from a geometric optics simulation, enforcing exact reciprocity. The method applies to roughness scales that are large with respect to the wavelength of light and small with respect to the spatial density at which the BRDF is sampled across the surface; examples include brushed metal and textiles. The method is validated by comparing with an existing scattering model and sample images are generated with a physically-based global illumination algorithm.
series	journal paper
last changed	2003/04/23 15:50

_id	cbed
authors	Yakubu, G.S.
year	1994
title	Maximising the Benefits of CAD Systems in Architectural Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 228
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u8n
summary	The positive impact of Computer Aided Design (CAD) in professional architectural practice has been in focus in recent times but relatively little has been written on its significance in the education of the contemporary architect. It is common knowledge that the profession of architecture is currently undergoing enormous strains as it battles to keep abreast of trends and developments in a period of series of rapid advancement in science, technology and management (RIBA, 1992). Whilst attempts are being made to redress the shortcomings of the profession in the above context, the requirements for architectural education are yet to forge a coherent strategy for the implementation of CAD/IT in the curriculum of schools of architecture. In almost every other field, including engineering, medicine and the humanities, computing application to problem-solving and decision-making is seen as a way forward as we move into 21st century. Architectural education must integrate CAD/IT into the teaching of core modules that give the architect distinctive competence: studio design. That is one of the best ways of doing justice to the education of the architect of today and the future. Some approaches to the teaching of CAD in schools of architecture have been touched upon in the recent past. Building upon this background as well as an understanding of the nature of design teaching/learning, this paper examines ways of maximising the benefits of CAD systems in architectural education and of bringing computer aided designing into the studio not only to enhance design thinking and creativity but also to support interactive processes. In order to maximise or optimise any function, one approach is to use the hard systems methodology which utilises analytic, analogic and iconic models to show the effect of those factors which are significant for the purposes being considered. The other approach is to use the soft systems methodology in which the analysis encompasses the concept of a human activity system as a means of improving a situation. The use of soft systems methodology is considered more appropriate for dealing with the problem of design which is characterised by a flux of interacting events and ideas that unroll through time. The paper concludes that the main impediment to maximising the benefits of CAD systems in architectural education is not only the inappropriate definition of the objectives for the implementation of CAD education but also that the control subsystems are usually ill-structured and relatively poorly defined. Schools must attempt to define a coherent and consistent policy on the use of CAD systems as an integral part of studio design and evolve an in-house strategic and operational controls that enable the set objectives to be met. Furthermore, it is necessary to support the high level of productivity from CAD systems with a more efficient management system, especially in dealing with communication, data sharing via relational database, co-ordination and integration. Finally, the use of soft systems methodology is recommended as the way forward to optimising CAD systems in design education as it would provide continuous improvements while maintaining their productive value.
series	eCAADe
last changed	2022/06/07 07:50

No more hits.