Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 223

Reformat results as: short short into frame detailed detailed into frame

_id	2312
authors	Carrara, G., Kalay Y.E. and Novembri, G.
year	1992
title	Multi-modal Representation of Design Knowledge
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 55-66
doi	https://doi.org/10.52842/conf.ecaade.1992.055
summary	Explicit representation of design knowledge is needed if scientific methods are to be applied in design research, and if computers are to be used in the aid of design education and practice. The representation of knowledge in general, and design knowledge in particular, have been the subject matter of computer science, design methods, and computer-aided design research for quite some time. Several models of design knowledge representation have been developed over the last 30 years, addressing specific aspects of the problem. This paper describes a different approach to design knowledge representation that recognizes the multimodal nature of design knowledge. It uses a variety of computational tools to encode different kinds of design knowledge, including the descriptive (objects), the prescriptive (goals) and the operational (methods) kinds. The representation is intended to form a parsimonious, communicable and presentable knowledge-base that can be used as a tool for design research and education as well as for CAAD.
keywords	Design Methods, Design Process Goals, Knowledge Representation, Semantic Networks
series	eCAADe
email
last changed	2022/06/07 07:55

_id	6ef4
authors	Carrara, Gianfranco and Kalay, Yehuda E.
year	1992
title	Multi-Model Representation of Design Knowledge
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 77-88
doi	https://doi.org/10.52842/conf.acadia.1992.077
summary	Explicit representation of design knowledge is needed if scientific methods are to be applied in design research, and if comPuters are to be used in the aid of design education and practice. The representation of knowledge in general, and design knowledge in particular, have been the subject matter of computer science, design methods, and computer- aided design research for quite some time. Several models of design knowledge representation have been developed over the last 30 years, addressing specific aspects of the problem. This paper describes a different approach to design knowledge representation that recognizes the Multi-modal nature of design knowledge. It uses a variety of computational tools to encode different kinds of design knowledge, including the descriptive (objects), the prescriptive (goals) and the operational (methods) kinds. The representation is intended to form a parsimonious, communicable and presentable knowledge-base that can be used as a tool for design research and education as well as for CAAD.
keywords	Design Methods, Design Process, Goals, Knowledge Representation, Semantic Networks
series	ACADIA
email
last changed	2022/06/07 07:55

_id	898a
authors	Bay, J.H.
year	2002
title	Cognitive Biases and Precedent Knowledge in Human and Computer-Aided Design Thinking
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 213-220
doi	https://doi.org/10.52842/conf.caadria.2002.213
summary	Cognitive biases (illusions) and potential errors can occur when using precedent knowledge for analogical, pre-parametric and qualitative design thinking. This paper refers largely to part of a completed research (Bay 2001) on how heuristic biases, discussed by Tversky and Kahneman (1982) in cognitive psychology, can affect judgement and learning of facts from precedents in architectural design, made explicit using a kernel of conceptual system (Tzonis et. al., 1978) and a framework of architectural representation (Tzonis 1992). These are used here to consider how such illusions and errors may be transferred to computer aided design thinking.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf5c
authors	Carpenter, B.
year	1992
title	The logic of typed feature structures with applications to unificationgrammars, logic programs and constraint resolution
source	Cambridge Tracts in Theoretical Computer Science, Cambridge University Press
summary	This book develops the theory of typed feature structures, a new form of data structure that generalizes both the first-order terms of logic programs and feature-structures of unification-based grammars to include inheritance, typing, inequality, cycles and intensionality. It presents a synthesis of many existing ideas into a uniform framework, which serves as a logical foundation for grammars, logic programming and constraint-based reasoning systems. Throughout the text, a logical perspective is adopted that employs an attribute-value description language along with complete equational axiomatizations of the various systems of feature structures. Efficiency concerns are discussed and complexity and representability results are provided. The application of feature structures to phrase structure grammars is described and completeness results are shown for standard evaluation strategies. Definite clause logic programs are treated as a special case of phrase structure grammars. Constraint systems are introduced and an enumeration technique is given for solving arbitrary attribute-value logic constraints. This book with its innovative approach to data structures will be essential reading for researchers in computational linguistics, logic programming and knowledge representation. Its self-contained presentation makes it flexible enough to serve as both a research tool and a textbook.
series	other
last changed	2003/04/23 15:14

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
doi	https://doi.org/10.52842/conf.ecaade.2000.057
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	ddss9209
id	ddss9209
authors	De Gelder, J.T. and Lucardie, G.L.
year	1993
title	Knowledge and data modelling in cad/cam applications
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Modelling knowledge and data in CAD/CAM applications is complex because different goals and contexts have to be taken into account. This complexity makes particular demands upon representation formalisms. Today many modelling tools are based on record structures. By analyzing the requirements for a product model of a portal structure in steel, this paper shows that in many situations record structures are not well suited as a representation formalism for storing knowledge and data in CAD/CAM applications. This is illustrated by performing a knowledge-level analysis of the knowledge and data generated in the design and manufacturing process of a portal structure in steel.
series	DDSS
last changed	2003/08/07 16:36

_id	e51d
authors	Fazio, P., Bedard, C. and Gowri, K.
year	1992
title	Constraints for Generating Building Envelope Design Alternatives
source	New York: John Wiley & Sons, 1992. pp. 145-155 : charts. includes bibliography
summary	The building envelope design process involves selecting materials and constructional types for envelope components. Many different materials need to be combined together for wall and roof assemblies to meet the various performance requirements such as thermal efficiency, cost, acoustic and fire resistances. The number of performance attributes to be considered in the design process is large. Lack of information, time limitations and the large number of feasible design alternatives generally force the designer to rely on past experience and practical judgement to make rapid design decisions. Current work at the Centre for Buildings Studies focuses on the development of knowledge-based synthesis and evaluation techniques for reducing the problems of information handling and decision making in building envelope design. The generation of design alternatives is viewed as a search process that identifies feasible combinations of building envelope components satisfying a set of performance requirements, material compatibility, practicality of design, etc. This paper discusses knowledge acquisition and representation issues involved in the definition of constraints to guide the generation of feasible combinations of envelope components
keywords	envelope, knowledge base, knowledge acquisition, representation, performance, design, structures, architecture, evaluation
series	CADline
last changed	2003/06/02 14:41

_id	83f7
authors	Fenves, Stephen J., Flemming, Ulrich and Hendrickson, Craig (et al)
year	1992
title	Performance Evaluation in an Integrated Software Environment for Building Design and Construction Planning
source	New York: John Wiley & Sons, 1992. pp. 159-169 : ill. includes bibliography
summary	In this paper the authors describe the role of performance evaluation in the Integrated Software Environment for Building Design and Construction Planning (IBDE), which is a testbed for examining integration issues in the same domain. Various processes in IBDE deal with the spatial configuration, structural design, and construction planning of high-rise office buildings. Performance evaluations occur within these processes based on different representation schemes and control mechanisms for the handling of performance knowledge. Within this multiprocess environment, opportunities also exist for performance evaluation across disciplines through design critics
keywords	evaluation, performance, integration, systems, building, design, construction, architecture, planning, structures, representation, control
series	CADline
email
last changed	2003/06/02 10:24

_id	a2e6
authors	Liggett, R.S., Mitchell, W.J. and Tan, M.
year	1992
title	Multi-Level Analysis and Optimization of Design
source	New York: John Wiley & Sons, 1992. pp. 2512-269 : ill. includes bibliography
summary	This paper discusses a knowledge-based computer-aided design system, that provides multi-level analysis capabilities, and that automatically propagates constraints on design variables from level to level. It also Supports formulation and solution of optimization problems at different levels, so that a solution can be approached by solving a sequence of appropriately constrained sub-optimization problems. Theory and implementation are discussed, and a detailed case study of application to the design of small house plans is provided
keywords	constraints, design, methods, knowledge base, CAD, systems, analysis, optimization, automation, user interface, shape grammars
series	CADline
email
last changed	2003/06/02 14:41

_id	2c22
authors	O'Neill, Michael J.
year	1992
title	Neural Network Simulation as a Computer- Aided design Tool For Predicting Wayfinding Performance
source	New York: John Wiley & Sons, 1992. pp. 347-366 : ill. includes bibliography
summary	Complex public facilities such as libraries, hospitals, and governmental buildings often present problems to users who must find their way through them. Research shows that difficulty in wayfinding has costs in terms of time, money, public safety, and stress that results from being lost. While a wide range of architectural research supports the notion that ease of wayfinding should be a criterion for good design, architects have no method for evaluating how well their building designs will support the wayfinding task. People store and retrieve information about the layout of the built environment in a knowledge representation known as the cognitive map. People depend on the information stored in the cognitive map to find their way through buildings. Although there are numerous simulations of the cognitive map, the mechanisms of these models are not constrained by what is known about the neurophysiology of the brain. Rather, these models incorporate search mechanisms that act on semantically encoded information about the environment. In this paper the author describes the evaluation and application of an artificial neural network simulation of the cognitive map as a means of predicting wayfinding behavior in buildings. This simulation is called NAPS-PC (Network Activity Processing Simulator--PC version). This physiologically plausible model represents knowledge about the layout of the environment through a network of inter-connected processing elements. The performance of NAPS-PC was evaluated against actual human wayfinding performance. The study found that the simulation generated behavior that matched the performance of human participants. After the validation, NAPS-PC was modified so that it could read environmental information directly from AutoCAD (a popular micro-computer-based CAD software package) drawing files, and perform 'wayfinding' tasks based on that environmental information. This prototype tool, called AutoNet, is conceptualized as a means of allowing designers to predict the wayfinding performance of users in a building before it is actually built
keywords	simulation, cognition, neural networks, evaluation, floor plans, applications, wayfinding, layout, building
series	CADline
last changed	2003/06/02 13:58

_id	cb5a
authors	Oxman, Rivka E.
year	1992
title	Multiple Operative and Interactive Modes in Knowledge-Based Design Systems
source	New York: John Wiley & Sons, 1992. pp. 125-143 : ill. includes bibliography
summary	A conceptual basis for the development of an expert system which is capable of integrating various modes of generation and evaluation in design is presented. This approach is based upon two sets of reasoning processes in the design system. The first enables a mapping between design requirements and solution descriptions in a generative mode of design; and the second enables a mapping between solution descriptions and performance evaluation in an evaluative and predictive mode. This concept supports a formal framework necessary for a knowledge-based design system to operate in a design partnership relation with the designer. Another fundamental concept in expert systems for design, dual direction interpretation between graphic and textual modes, is presented and elaborated. This encoding of knowledge behind the geometrical representation can be achieved in knowledge- based design systems by the development of a 'semantic interpreter' which supports a dual direction mapping process employing a geometrical knowledge, typological knowledge and evaluative knowledge. An implemented expert system for design, PREDIKT, demonstrates these concepts in the domain of kitchen design. It provides the user with a choice of alternative modes of interaction, such as: a 'design critic' for the evaluation of a design, a 'design generator' for the generation of a design, or a 'design critic-generator' for the completion of partial solutions
keywords	architecture, knowledge base, design, systems, expert systems
series	CADline
email
last changed	2003/06/02 10:24

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	fd02
authors	Tsou, Jin-Yeu
year	1992
title	Using conceptual modelling and an object-oriented environment to support building cost control during early design
source	College of Architecture and Urban Planning, University of Michigan
summary	This research investigated formal information modelling techniques and the object-oriented knowledge representation on the domain of building cost control during early design stages. The findings contribute to an understanding of the advantages and disadvantages of applying formal modelling techniques to the analysis of architectural problems and the representation of domain knowledge in an object-oriented environment. In this study, information modelling techniques were reviewed, formal information analysis was performed, a conceptual model based on the cost control problem domain was created, a computational model based on the object-oriented approach was developed, a mechanism to support information broadcasting for representing interrelationships was implemented, and an object-oriented cost analysis system for early design (OBCIS) was demonstrated. The conceptual model, based on the elemental proposition analysis of NIAM, supports a formal approach for analyzing the problem domain; the analysis results are represented by high-level graphical notations, based on the AEC Building System Model, to visually display the information framework of the domain. The conceptual model provides an intermediate step between the system designer's view of the domain and the internal representation of the implementation platform. The object-oriented representation provides extensive data modelling abilities to help system designers intuitively represent the semantics of the problem domain. The object-oriented representation also supports more structured and integrated modules than conventional programming approaches. Although there are many advantages to applying this technique to represent the semantics of cost control knowledge, there are several issues which need to be considered: no single satisfactory classification method can be directly applied; object-oriented systems are difficult to learn; and designing reusable classes is difficult. The dependency graph and information broadcasting implemented in this research is an attempt to represent the interrelationships between domain objects. The mechanism allows users to explicitly define the interrelationships, based on semantic requirements, among domain objects. In the conventional approach, these relationships are directly interpreted by system designers and intertwined into the programming code. There are several issues which need to be studied further: indirect dependency relationship, conflict resolution, and request-update looping based on least-commitment approach.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	6208
authors	Abou-Jaoude, Georges
year	1992
title	To Master a Tool
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part B, p. 15
summary	The tool here is the computer or to be precise, a unit that includes the computer, the peripherals and the software needed to fulfill a task. These tools are getting very sophisticated and user interfaces extremly friendly, therefore it is very easy to become the slave of such electronic tools and reach self satisfaction with strait forward results and attractive images. In order to master and not to become slaves of sophisticated tools, a very solid knowledge of related fields or domains of application becomes necessary. In the case of this seminar, full scale modelling, is a way to understand the relation between a mental model and it's full-scale modelling, it is a way of communicating what is in a designers mind. Computers and design programs can have the same goal, rather than chosing one method or the other let us try to say how important it is today to complement designing with computer with other means and media such as full scale modelling, and what computer modelling and simulation can bring to full scale modelling or other means.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	ascaad2022_043
id	ascaad2022_043
authors	Awan, Abeeha; Prokop, Simon; Vele, Jiri; Dounas, Theodor; Lombardi, Davide; Agkathidis, Asterios; Kurilla, Lukas
year	2022
title	Qualitative Knowledge Graph for the Evaluation of Metaverse(s) - Is the Metaverse Hype or a Promising New Field for Architects?
source	Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 99-116
summary	With the advancement of augmented and virtual reality technologies both in scale as well as accessibility, the Metaverse (Stephenson, 1992, Hughes, 2022) has emerged as a new digital space with potential for the application of architectural creativity and design. With blockchain integration, the concept of the Metaverse shows promise in creating a “decentralised” space for design and creativity with rewards for its participants. As a platform that incorporates these technological components, does the Metaverse have utility for architectural design? Is there something truly novel in what the Metaverse brings to architectural computing, and architectural design? The paper constructs a qualitative knowledge graph that can be used for the evaluation of various kinds of Metaverses in and for architectural design. We use Design Science Research methods to develop the knowledge graph and its evaluative capacity, stemming from our experience with two Metaverses, Decentraland and Cryptovoxels. The paper concludes with a discussion of knowledge and practice gaps that are evident, framing the opportunities that architects might have in the future in terms of developing Metaverse(s).
series	ASCAAD
email
last changed	2024/02/16 13:24

_id	a6d8
authors	Baletic, Bojan
year	1992
title	Information Codes of Mutant Forms
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 173-186
doi	https://doi.org/10.52842/conf.ecaade.1992.173
summary	If we assume that the statements from this quote are true, than we have to ask ourselves the question: "Should we teach architecture as we do?" This paper describes our experience in developing a knowledge base using a neural network system to serve as a "intelligent assistant" to students and other practicing architects in the conceptual phase of their work on housing design. Our approach concentrated on rising the awareness of the designer about the problem, not by building rules to guide him to a solution, but by questioning the categories and typologies by which he classifies and understands a problem. This we achieve through examples containing mutant forms, imperfect rules, gray zones between black and white, that carry the seeds of new solutions.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	328d
authors	Bassanino, May Nahab and Brown, Andre
year	1999
title	Computer Generated Architectural Images: A Comparative Study
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 552-556
doi	https://doi.org/10.52842/conf.ecaade.1999.552
summary	This work is part of a long term research programme (Brown and Horton, 1992; Brown and Nahab, 1996; Bassanino, 1999) in which tests and studies have been carried out on various groups of people to investigate their reaction to, and interpretation of different forms of architectural representation. In the work described here a range of architectural schemes were presented using particular representational techniques and media. An experiment was then undertaken on two different groups; architects and lay people. They were presented with a number of schemes displayed using the various techniques and media. The responses are summarised and some comments are made on the effect of computers on perceiving architecture and on communicating architectural ideas arising from an analysis of the responses.
keywords	Subject, Image Type, Presentation Technique, Medium, SD Scales, Factors
series	eCAADe
email
last changed	2022/06/07 07:54

_id	aa78
authors	Bayazit, Nigan
year	1992
title	Requirements of an Expert System for Design Studios
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 187-194
doi	https://doi.org/10.52842/conf.ecaade.1992.187
summary	The goal of this paper is to study problems of the transition from traditional architectural studio teaching to CAAD studio teaching which requires a CAAD expert system as studio tutor, and to study the behavior of the student in this new environment. The differences between the traditional and computerized studio teaching and the experiences in this field are explained referring to the requirements for designing time in relation to the expertise of the student in the application of a CAD program. Learning styles and the process of design in computerized and non-computerized studio teaching are discussed. Design studio requirements of the students in traditional studio environment while doing design works are clarified depending on the results of an empirical study which explained the relations between the tutor and the student while they were doing studio critiques. Main complaints of the students raised in the empirical study were the lack of data in the specific design problem area, difficulties of realization of ideas and thoughts, not knowing the starting point of design, having no information about the references to be used for the specific design task, having difficulties in the application of presentation techniques. In the concluding parts of the paper are discussed the different styles of teaching and their relation to the CAAD environment, the transformation of the instructional programs for the new design environment, the future expectations from the CAAD programs, properties of the new teaching environment and the roles of the expert systems in design studio education.
keywords	CAAD Education, Expert System, Architectural Design Studio, Knowledge Acquisition
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	b2f9
id	b2f9
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	INTELLIGENT KNOWLEDGE-BASED REPOSITORY TO SUPPORT INFORMED DESIGN DECISION MAKING
source	ITCON journal
summary	Research highlights that architectural design is a social phenomenon that is underpinned by critical analysis of design precedents and the social interaction between designers including negotiation, collaboration and communication. CAAD systems are continuously developing as essential design tools in formulating and developing ideas. Researchers such as (Rosenman, Gero and Oxman 1992) have suggested suggest that knowledge based systems can be integrated with CAAD systems to provide design knowledge that would enable recalling design precedents that maybe linked to the design constraints. Currently CAAD systems are user centric being focused on architects rather than the end product. The systems provide limited assistance in the production of innovative design. Furthermore, the attention of the designers of knowledge based systems is providing a repository rather than a system that is capable to initiate innovation. Most of the CAAD systems have web communication tools that enable designers to communicate their design ideas with colleagues and partners in business. However, none of these systems have the capability to capture useful knowledge from the design negotiations. Students of the third to fifth year at College of Architecture, University of Dammam were surveyed and interviewed to find out how far design tools, communications and resources would impact the production of innovative design projects. The survey results show that knowledge extracted from design negotiations would impact the innovative design outcome. It highlights also that present design precedents are not very helpful and design negotiations between students, tutors and other students are not documented thus fully incorporated into the design scheme. The paper argues that the future CAAD systems should be capable to recognize innovative design precedents, and incorporate knowledge that is resulted from design negotiations. This would help students to gain a critical mass of knowledge that would underpin informed design decisions.
series	journal paper
type	normal paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_20
last changed	2012/09/19 13:41

For more results click below: