Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 233

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9207
id	ddss9207
authors	Gauchel, J., Hovestadt, L., van Wyk, S. and Bhat, R.R.
year	1993
title	Modular building models
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The development and implementation of a modular building model appropriate for computer aided design is described. The limitations of a unified building model with regard to concurrence and complexity in design is discussed. Current research suggests that to model real-world complexity, one must trade centralized control for autonomy. In this paper we develop a modular approach to building modelling that is based on object-oriented autonomy and makes it possible to define these models in a distributed concurrent manner. Such a modular and autonomous implementation brings inherent uncertainty and conflict which cannot be determined a priori.
series	DDSS
last changed	2003/08/07 16:36

_id	2006_040
id	2006_040
authors	Ambach, Barbara
year	2006
title	Eve’s Four Faces-Interactive surface configurations
doi	https://doi.org/10.52842/conf.ecaade.2006.040
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 40-44
summary	Eve’s Four Faces consists of a series of digitally animated and interactive surfaces. Their content and structure are derived from a collection of sources outside the conventional boundaries of architectural research, namely psychology and the broader spectrum of arts and culture. The investigation stems from a psychological study documenting the attributes and social relationships of four distinct personality prototypes; the “Individuated”, the “Traditional”, the “Conflicted” and the “Assured”. (York and John, 1992) For the purposes of this investigation, all four prototypes are assumed to be inherent, to certain degrees, in each individual; however, the propensity towards one of the prototypes forms the basis for each individual’s “personality structure”. The attributes, social implications and prospects for habitation have been translated into animations and surfaces operating within A House for Eve’s Four Faces. The presentation illustrates the potential for constructed surfaces to be configured and transformed interactively, responding to the needs and qualities associated with each prototype. The intention is to study the effects of each configuration and how it may be therapeutic in supporting, challenging or altering one’s personality as it oscillates and shifts through the four prototypical conditions.
keywords	interaction; digital; environments; psychology; prototypes
series	eCAADe
type	normal paper
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	b2f9
id	b2f9
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	INTELLIGENT KNOWLEDGE-BASED REPOSITORY TO SUPPORT INFORMED DESIGN DECISION MAKING
source	ITCON journal
summary	Research highlights that architectural design is a social phenomenon that is underpinned by critical analysis of design precedents and the social interaction between designers including negotiation, collaboration and communication. CAAD systems are continuously developing as essential design tools in formulating and developing ideas. Researchers such as (Rosenman, Gero and Oxman 1992) have suggested suggest that knowledge based systems can be integrated with CAAD systems to provide design knowledge that would enable recalling design precedents that maybe linked to the design constraints. Currently CAAD systems are user centric being focused on architects rather than the end product. The systems provide limited assistance in the production of innovative design. Furthermore, the attention of the designers of knowledge based systems is providing a repository rather than a system that is capable to initiate innovation. Most of the CAAD systems have web communication tools that enable designers to communicate their design ideas with colleagues and partners in business. However, none of these systems have the capability to capture useful knowledge from the design negotiations. Students of the third to fifth year at College of Architecture, University of Dammam were surveyed and interviewed to find out how far design tools, communications and resources would impact the production of innovative design projects. The survey results show that knowledge extracted from design negotiations would impact the innovative design outcome. It highlights also that present design precedents are not very helpful and design negotiations between students, tutors and other students are not documented thus fully incorporated into the design scheme. The paper argues that the future CAAD systems should be capable to recognize innovative design precedents, and incorporate knowledge that is resulted from design negotiations. This would help students to gain a critical mass of knowledge that would underpin informed design decisions.
series	journal paper
type	normal paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_20
last changed	2012/09/19 13:41

_id	a93f
authors	Eisenman, P.
year	1992
title	Visions unfolding: architecture in the age of electronic media
source	Domus, 1/92
summary	During the fifty years sinee the Second World War, a paradigm shift has taken place that should have profoundly affected architecture: this was the shift from the mechanicai paradigm to the electrorlic one. This change can be simply understood by comparing the impact of the role of the human subject on such primary modes of reproduction as the photograph and the fax; the photograph within the mechanical paradigm, the fax within the electronic one. In photographic reproduction the subiect still maintains a controlled interaction with the object. A photograph can be developed with more or less contrast, texture or clarity.
series	journal paper
last changed	2003/04/23 15:50

_id	4129
authors	Fargas, Josep and Papazian, Pegor
year	1992
title	Metaphors in Design: An Experiment with a Frame, Two Lines and Two Rectangles
doi	https://doi.org/10.52842/conf.acadia.1992.013
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 13-22
summary	The research we will discuss below originated from an attempt to examine the capacity of designers to evaluate an artifact, and to study the feasibility of replicating a designer's moves intended to make an artifact more expressive of a given quality. We will present the results of an interactive computer experiment, first developed at the MIT Design Research Seminar, which is meant to capture the subject’s actions in a simple design task as a series of successive "moves"'. We will propose that designers use metaphors in their interaction with design artifacts and we will argue that the concept of metaphors can lead to a powerful theory of design activity. Finally, we will show how such a theory can drive the project of building a design system. When trying to understand how designers work, it is tempting to examine design products in order to come up with the principles or norms behind them. The problem with such an approach is that it may lead to a purely syntactical analysis of design artifacts, failing to capture the knowledge of the designer in an explicit way, and ignoring the interaction between the designer and the evolving design. We will present a theory about design activity based on the observation that knowledge is brought into play during a design task by a process of interpretation of the design document. By treating an evolving design in terms of the meanings and rules proper to a given way of seeing, a designer can reduce the complexity of a task by focusing on certain of its aspects, and can manipulate abstract elements in a meaningful way.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	7ce5
authors	Gal, Shahaf
year	1992
title	Computers and Design Activities: Their Mediating Role in Engineering Education
source	Sociomedia, ed. Edward Barret. MIT Press
summary	Sociomedia: With all the new words used to describe electronic communication (multimedia, hypertext, cyberspace, etc.), do we need another one? Edward Barrett thinks we do; hence, he coins the term "sociomedia." It is meant to displace a computing economy in which technicity is hypostasized over sociality. Sociomedia, a compilation of twenty-five articles on the theory, design and practice of educational multimedia and hypermedia, attempts to re-value the communicational face of computing. Value, of course, is "ultimately a social construct." As such, it has everything to do with knowledge, power, education and technology. The projects discussed in this book represent the leading edge of electronic knowledge production in academia (not to mention major funding) and are determining the future of educational media. For these reasons, Sociomedia warrants close inspection. Barrett's introduction sets the tone. For him, designing computer media involves hardwiring a mechanism for the social construction of knowledge (1). He links computing to a process of social and communicative interactivity for constructing and desseminating knowledge. Through a mechanistic mapping of the university as hypercontext (a huge network that includes classrooms as well as services and offices), Barrett models intellectual work in such a way as to avoid "limiting definitions of human nature or human development." Education, then, can remain "where it should be--in the human domain (public and private) of sharing ideas and information through the medium of language." By leaving education in a virtual realm (where we can continue to disagree about its meaning and execution), it remains viral, mutating and contaminating in an intellectually healthy way. He concludes that his mechanistic model, by means of its reductionist approach, preserves value (7). This "value" is the social construction of knowledge. While I support the social orientation of Barrett's argument, discussions of value are related to power. I am not referring to the traditional teacher-student power structure that is supposedly dismantled through cooperative and constructivist learning strategies. The power to be reckoned with in the educational arena is foundational, that which (pre)determines value and the circulation of knowledge. "Since each of you reading this paragraph has a different perspective on the meaning of 'education' or 'learning,' and on the processes involved in 'getting an education,' think of the hybris in trying to capture education in a programmable function, in a displayable object, in a 'teaching machine'" (7). Actually, we must think about that hybris because it is, precisely, what informs teaching machines. Moreover, the basic epistemological premises that give rise to such productions are too often assumed. In the case of instructional design, the episteme of cognitive sciences are often taken for granted. It is ironic that many of the "postmodernists" who support electronic hypertextuality seem to have missed Jacques Derrida's and Michel Foucault's "deconstructions" of the epistemology underpinning cognitive sciences (if not of epistemology itself). Perhaps it is the glitz of the technology that blinds some users (qua developers) to the belief systems operating beneath the surface. Barrett is not guilty of reactionary thinking or politics; he is, in fact, quite in line with much American deconstructive and postmodern thinking. The problem arises in that he leaves open the definitions of "education," "learning" and "getting an education." One cannot engage in the production of new knowledge without orienting its design, production and dissemination, and without negotiating with others' orientations, especially where largescale funding is involved. Notions of human nature and development are structural, even infrastructural, whatever the medium of the teaching machine. Although he addresses some dynamics of power, money and politics when he talks about the recession and its effects on the conference, they are readily visible dynamics of power (3-4). Where does the critical factor of value determination, of power, of who gets what and why, get mapped onto a mechanistic model of learning institutions? Perhaps a mapping of contributors' institutions, of the funding sources for the projects showcased and for participation in the conference, and of the disciplines receiving funding for these sorts of projects would help visualize the configurations of power operative in the rising field of educational multimedia. Questions of power and money notwithstanding, Barrett's introduction sets the social and textual thematics for the collection of essays. His stress on interactivity, on communal knowledge production, on the society of texts, and on media producers and users is carried foward through the other essays, two of which I will discuss. Section I of the book, "Perspectives...," highlights the foundations, uses and possible consequences of multimedia and hypertextuality. The second essay in this section, "Is There a Class in This Text?," plays on the robust exchange surrounding Stanley Fish's book, Is There a Text in This Class?, which presents an attack on authority in reading. The author, John Slatin, has introduced electronic hypertextuality and interaction into his courses. His article maps the transformations in "the content and nature of work, and the workplace itself"-- which, in this case, is not industry but an English poetry class (25). Slatin discovered an increase of productive and cooperative learning in his electronically- mediated classroom. For him, creating knowledge in the electronic classroom involves interaction between students, instructors and course materials through the medium of interactive written discourse. These interactions lead to a new and persistent understanding of the course materials and of the participants' relation to the materials and to one another. The work of the course is to build relationships that, in my view, constitute not only the meaning of individual poems, but poetry itself. The class carries out its work in the continual and usually interactive production of text (31). While I applaud his strategies which dismantle traditional hierarchical structures in academia, the evidence does not convince me that the students know enough to ask important questions or to form a self-directing, learning community. Stanley Fish has not relinquished professing, though he, too, espouses the indeterminancy of the sign. By the fourth week of his course, Slatin's input is, by his own reckoning, reduced to 4% (39). In the transcript of the "controversial" Week 6 exchange on Gertrude Stein--the most disliked poet they were discussing at the time (40)--we see the blind leading the blind. One student parodies Stein for three lines and sums up his input with "I like it." Another, finds Stein's poetry "almost completey [sic] lacking in emotion or any artistic merit" (emphasis added). On what grounds has this student become an arbiter of "artistic merit"? Another student, after admitting being "lost" during the Wallace Steven discussion, talks of having more "respect for Stevens' work than Stein's" and adds that Stein's poetry lacks "conceptual significance[, s]omething which people of varied opinion can intelligently discuss without feeling like total dimwits...." This student has progressed from admitted incomprehension of Stevens' work to imposing her (groundless) respect for his work over Stein's. Then, she exposes her real dislike for Stein's poetry: that she (the student) missed the "conceptual significance" and hence cannot, being a person "of varied opinion," intelligently discuss it "without feeling like [a] total dimwit." Slatin's comment is frightening: "...by this point in the semester students have come to feel increasingly free to challenge the instructor" (41). The students that I have cited are neither thinking critically nor are their preconceptions challenged by student-governed interaction. Thanks to the class format, one student feels self-righteous in her ignorance, and empowered to censure. I believe strongly in student empowerment in the classroom, but only once students have accrued enough knowledge to make informed judgments. Admittedly, Slatin's essay presents only partial data (there are six hundred pages of course transcripts!); still, I wonder how much valuable knowledge and metaknowledge was gained by the students. I also question the extent to which authority and professorial dictature were addressed in this course format. The power structures that make it possible for a college to require such a course, and the choice of texts and pedagogy, were not "on the table." The traditional professorial position may have been displaced, but what took its place?--the authority of consensus with its unidentifiable strong arm, and the faceless reign of software design? Despite Slatin's claim that the students learned about the learning process, there is no evidence (in the article) that the students considered where their attitudes came from, how consensus operates in the construction of knowledge, how power is established and what relationship they have to bureaucratic insitutions. How do we, as teaching professionals, negotiate a balance between an enlightened despotism in education and student-created knowledge? Slatin, and other authors in this book, bring this fundamental question to the fore. There is no definitive answer because the factors involved are ultimately social, and hence, always shifting and reconfiguring. Slatin ends his article with the caveat that computerization can bring about greater estrangement between students, faculty and administration through greater regimentation and control. Of course, it can also "distribute authority and power more widely" (50). Power or authority without a specific face, however, is not necessarily good or just. Shahaf Gal's "Computers and Design Activities: Their Mediating Role in Engineering Education" is found in the second half of the volume, and does not allow for a theory/praxis dichotomy. Gal recounts a brief history of engineering education up to the introduction of Growltiger (GT), a computer-assisted learning aid for design. He demonstrates GT's potential to impact the learning of engineering design by tracking its use by four students in a bridge-building contest. What his text demonstrates clearly is that computers are "inscribing and imaging devices" that add another viewpoint to an on-going dialogue between student, teacher, earlier coursework, and other teaching/learning tools. The less proficient students made a serious error by relying too heavily on the technology, or treating it as a "blueprint provider." They "interacted with GT in a way that trusted the data to represent reality. They did not see their interaction with GT as a negotiation between two knowledge systems" (495). Students who were more thoroughly informed in engineering discourses knew to use the technology as one voice among others--they knew enough not simply to accept the input of the computer as authoritative. The less-advanced students learned a valuable lesson from the competition itself: the fact that their designs were not able to hold up under pressure (literally) brought the fact of their insufficient knowledge crashing down on them (and their bridges). They also had, post factum, several other designs to study, especially the winning one. Although competition and comparison are not good pedagogical strategies for everyone (in this case the competitors had volunteered), at some point what we think we know has to be challenged within the society of discourses to which it belongs. Students need critique in order to learn to push their learning into auto-critique. This is what is lacking in Slatin's discussion and in the writings of other avatars of constructivist, collaborative and computer-mediated pedagogies. Obviously there are differences between instrumental types of knowledge acquisition and discoursive knowledge accumulation. Indeed, I do not promote the teaching of reading, thinking and writing as "skills" per se (then again, Gal's teaching of design is quite discursive, if not dialogic). Nevertheless, the "soft" sciences might benefit from "bridge-building" competitions or the re-institution of some forms of agonia. Not everything agonistic is inhuman agony--the joy of confronting or creating a sound argument supported by defensible evidence, for example. Students need to know that soundbites are not sound arguments despite predictions that electronic writing will be aphoristic rather than periodic. Just because writing and learning can be conceived of hypertextually does not mean that rigor goes the way of the dinosaur. Rigor and hypertextuality are not mutually incompatible. Nor is rigorous thinking and hard intellectual work unpleasurable, although American anti-intellectualism, especially in the mass media, would make it so. At a time when the spurious dogmatics of a Rush Limbaugh and Holocaust revisionist historians circulate "aphoristically" in cyberspace, and at a time when knowledge is becoming increasingly textualized, the role of critical thinking in education will ultimately determine the value(s) of socially constructed knowledge. This volume affords the reader an opportunity to reconsider knowledge, power, and new communications technologies with respect to social dynamics and power relationships.
series	other
last changed	2003/04/23 15:14

_id	a081
authors	Greenberg S., Roseman M. and Webster, D.
year	1992
title	Issues and Experiences Designing and Implementing Two Group Drawing Tools
source	Readings in Groupware, 609-620
summary	Groupware designers are now developing multi-user equivalents of popular paint and draw applications. Their job is not an easy one. First, human factors issues peculiar to group interaction appear that, if ignored, seriously limit the usability of the group tool. Second, implementation is fraught with considerable hurdles. This paper describes the issues and experiences we have met and handled in the design of two systems supporting remote real time group interaction: GroupSketch, a multi-user sketchpad; and GroupDraw, an object-based multi-user draw package. On the human factors side, we summarize empirically-derived design principles that we believe are critical to building useful and usable collaborative drawing tools. On the implementation side, we describe our experiences with replicated versus centralized architectures, schemes for participant registration, multiple cursors, network requirements, and the structure of the drawing primitives.
series	other
last changed	2003/04/23 15:50

_id	5c74
authors	HCIL
year	1997
title	Spatial Perception in Perspective Displays
source	Report Human-Computer Interaction Lab, Virginia
summary	Increasingly, computer displays are being used as the interface "window" between complex systems and their users. In addition, it is becoming more common to see computer interfaces represented by spatial metaphors, allowing users to apply their vast prior knowledge and experience in dealing with the three-dimensional (3D) world (Wickens, 1992). Desktop VR or window on a world (WoW), as it is sometimes called, uses a conventional computer monitor to display the virtual environment (VE). The 3D display applies perspective geometry to provide the illusion of 3D space.
series	report
last changed	2003/04/23 15:50

_id	ddss9218
id	ddss9218
authors	Hensen, J.L.M.
year	1993
title	Design support via simulation of building and plant thermal interaction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Design decision support related to building energy consumption and/or indoor climate should be based on an integral approach to the environment, the building, heating, ventilating and air-conditioning (HVAC) system, and the occupants. The tools to achieve this are now available in the form of computer simulation systems which treat the building and plant as an integrated dynamic system. Although its potentials reach beyond the area of Computer Aided Building Design, the paper describes building and plant energy simulation within the context of CABD, design decision support and design evaluation. Currently, computer simulation is only used indirectly as a design decision support mechanism; that is, its power is not delivered very efficiently to the design profession. This paper suggests some future research directions. These are aimed at providing a mechanism to overcome this problem by developing an intelligent front end' which bridges the gap between sophisticated computer simulation tools and the design profession.
series	DDSS
last changed	2003/08/07 16:36

_id	15f6
authors	Holyer, Andy
year	1992
title	Top-Down Object-Based User Interface Definition and Design Paradigms
source	East-West International Conference on Human-Computer Interaction: Proceedings of the EWHCI'92 1992 pp. 421-428
summary	Currently, the main emphasis in User Interface design tools is on the low-level manipulation of Interaction Components, such as widgets. This paper proposes a design architecture which approaches User Interface development in a top-down manner, to avoid particular shortcomings in current design methodologies.
series	other
last changed	2002/07/07 16:01

_id	7bf4
authors	Hornyanszky-Dalholm, Elisabeth and Rydberg-Mitchell, Birgitta
year	1992
title	COMMUNICATING WITH LAYPEOPLE
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part B, pp. 25-32
summary	The purpose of the architect's tools is, as generally stated, to help the architects themselves to develop and visualize their spatial ideas and intentions. But the tools can also be used to communicate with other groups of professionals and with laypeople. This paper deals with the question how the choice of tools can effect the communication between laypeople and architects. It also stresses the need of combining different media in order to create the best conditions for user's participation. If the users will be able to influence the planning of an environment they must understand the "language" of the medium and have the ability to use it themselves. Models on diverse scales, and first of all the scale 1:1, fulfil these demands better than drawings. There are distinct limitations of the full-scale model, when it comes to give the users a comprehension of the entire mock-up, and thus models on smaller scales are required. Limitations of both full-scale and small scale models concerning visualizing the exterior and the building's interaction with the environment could possibly be worked out with the help of computer technique.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:39

_id	e7c8
authors	Kalisperis, Loukas N., Steinman, Mitch and Summers, Luis H.
year	1992
title	Design Knowledge, Environmental Complexity in Nonorthogonal Space
source	New York: John Wiley & Sons, 1992. pp. 273-291 : ill. includes bibliography
summary	Mechanization and industrialization of society has resulted in most people spending the greater part of their lives in enclosed environments. Optimal design of indoor artificial climates is therefore of increasing importance. Wherever artificial climates are created for human occupation, the aim is that the environment be designed so that individuals are in thermal comfort. Current design methodologies for radiant panel heating systems do not adequately account for the complexities of human thermal comfort, because they monitor air temperature alone and do not account for thermal neutrality in complex enclosures. Thermal comfort for a person is defined as that condition of mind which expresses satisfaction with the thermal environment. Thermal comfort is dependent on Mean Radiant Temperature and Operative Temperature among other factors. In designing artificial climates for human occupancy the interaction of the human with the heated surfaces as well the surface-to-surface heat exchange must be accounted for. Early work in the area provided an elaborate and difficult method for calculating radiant heat exchange for simplistic and orthogonal enclosures. A new improved method developed by the authors for designing radiant panel heating systems based on human thermal comfort and mean radiant temperature is presented. Through automation and elaboration this method overcomes the limitations of the early work. The design procedure accounts for human thermal comfort in nonorthogonal as well as orthogonal spaces based on mean radiant temperature prediction. The limitation of simplistic orthogonal geometries has been overcome with the introduction of the MRT-Correction method and inclined surface-to-person shape factor methodology. The new design method increases the accuracy of calculation and prediction of human thermal comfort and will allow designers to simulate complex enclosures utilizing the latest design knowledge of radiant heat exchange to increase human thermal comfort
keywords	applications, architecture, building, energy, systems, design, knowledge
series	CADline
last changed	2003/06/02 10:24

_id	11b6
authors	Kalmychkov, Vitaly A. and Smolyaninov, Alexander V.
year	1992
title	Design of Object-Oriented Data Visualization System
source	East-West International Conference on Human-Computer Interaction: Proceedings of the EWHCI'92 1992 pp. 463-470
summary	The report is devoted to the data visualization system design and implementation, which provides the means for design of the image of the user's numeric information on the personal computer. The problems of design, architecture and operation of data visualization system which provides to user convenient means for constructing the numeric information image of required type is considered. Image constructing is executed by means of required sizes fields placing and filling of them by necessary content (coordinates system, graphs, inscriptions). User's interface with instrument system is object-oriented: after object (field or its content) choice user can manipulate of it, executing only those operations, that are determined for it as object of appointed function. Ergonomical and comfortable constructing is ensured by careful coordinated system of possible actions on each of image constructing stage and supported by icons menu and textual menu.
series	other
last changed	2002/07/07 16:01

_id	88ca
authors	Kane, Andy and Szalapaj, Peter
year	1992
title	Teaching Design By Analysis of Precedents
doi	https://doi.org/10.52842/conf.ecaade.1992.477
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 477-496
summary	Designers, using their intuitive understanding of the decomposition of particular design objects, whether in terms of structural, functional, or some other analytical framework, should be able to interact with computational environments such that the understanding they achieve in turn invokes changes or transformations to the spatial properties of design proposals. Decompositions and transformations of design precedents can be a very useful method of enabling design students to develop analytical strategies. The benefit of an analytical approach is that it can lead to a structured understanding of design precedents. This in turn allows students to develop their own insights and ideas which are central to the activity of designing. The creation of a 3-D library of user-defined models of precedents in a computational environment permits an under-exploited method of undertaking analysis, since by modelling design precedents through the construction of 3-D Computer-Aided Architectural Design (CAAD) models, and then analytically decomposing them in terms of relevant features, significant insights into the nature of designs can be achieved. Using CAAD systems in this way, therefore, runs counter to the more common approach of detailed modelling, rendering and animation; which produces realistic pictures that do not reflect the design thinking that went into their production. The significance of the analytical approach to design teaching is that it encourages students to represent design ideas, but not necessarily the final form of design objects. The analytical approach therefore, allows students to depict features and execute tasks that are meaningful with respect to design students' own knowledge of particular domains. Such computational interaction can also be useful in helping students explore the consequences of proposed actions in actual design contexts.
series	eCAADe
last changed	2022/06/07 07:52

_id	9d0c
authors	McVey, G., McCrobie, D., Evans, D., McIlvaine Parsons, D., Templar, J. Konz, S. and Caldwell, B.
year	1992
title	Interactions between Environmental Design and Human Factors Specialists ENVIRONMENTAL DESIGN: Panel
source	Proceedings of the Human Factors Society 36th Annual Meeting 1992 v.1 pp. 575-577
summary	Most of the interactions between human factors specialists, such as ergonomists, and environmental specialists such as facility planners and architects tend to be task specific and do not follow any accepted process. Consequently, the success of such interactions are usually a function of serendipity rather than informed expectation. It is anticipated that by gathering such specialists in an open discussion, relevant issues may be addressed and successful interaction procedures introduced and discussed. Such a forum is desirable for developing an understanding of the differences, educational and operational, between environmental design specialists, and human factors specialists, as well as for exploring the ways their communications can be enhanced. It is anticipated that by sharing their experiences with the attendees, the presenters will identify relevant on-going knowledge transfer activities, and also introduce and discuss practical problem-solving and communication methods that can be used with assurance by the attendees themselves when faced with similar problems in the future. This panel will focus on issues that arrive out of situations where human factors specialists and environmental design specialists are joined together in project development. The specialties represented include architecture, facility planning, environmental psychology, ergonomic research, industrial design and engineering, and equipment and furniture design and manufacturing.
series	other
last changed	2002/07/07 16:01

_id	cb5a
authors	Oxman, Rivka E.
year	1992
title	Multiple Operative and Interactive Modes in Knowledge-Based Design Systems
source	New York: John Wiley & Sons, 1992. pp. 125-143 : ill. includes bibliography
summary	A conceptual basis for the development of an expert system which is capable of integrating various modes of generation and evaluation in design is presented. This approach is based upon two sets of reasoning processes in the design system. The first enables a mapping between design requirements and solution descriptions in a generative mode of design; and the second enables a mapping between solution descriptions and performance evaluation in an evaluative and predictive mode. This concept supports a formal framework necessary for a knowledge-based design system to operate in a design partnership relation with the designer. Another fundamental concept in expert systems for design, dual direction interpretation between graphic and textual modes, is presented and elaborated. This encoding of knowledge behind the geometrical representation can be achieved in knowledge- based design systems by the development of a 'semantic interpreter' which supports a dual direction mapping process employing a geometrical knowledge, typological knowledge and evaluative knowledge. An implemented expert system for design, PREDIKT, demonstrates these concepts in the domain of kitchen design. It provides the user with a choice of alternative modes of interaction, such as: a 'design critic' for the evaluation of a design, a 'design generator' for the generation of a design, or a 'design critic-generator' for the completion of partial solutions
keywords	architecture, knowledge base, design, systems, expert systems
series	CADline
email
last changed	2003/06/02 10:24

_id	46c7
id	46c7
authors	Ozel, Filiz
year	1992
title	Data Modeling Needs of Life Safety Code (LSC) Compliance Applications
doi	https://doi.org/10.52842/conf.acadia.1992.177
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 177-185
summary	One of the most complex code compliance issues originates from the conformance of designs to Life Safety Code (NFPA 101). The development of computer based code compliance checking programs attracted the attention of building researchers and practitioners alike. These studies represent a number of approaches ranging from CAD based procedural approaches to rule based, non graphic ones, but they do not address the interaction of the rule base of such systems with graphic data bases that define the geometry of architectural objects. Automatic extraction of the attributes and the configuration of building systems requires 11 architectural object - graphic entity" data models that allow access and retrieval of the necessary data for code compliance checking. This study aims to specifically focus on the development of such a data model through the use of AutoLISP feature of AutoCAD (Autodesk Inc.) graphic system. This data model is intended to interact with a Life Safety Code rule base created through Level5-Object (Focus Inc.) expert system. Assuming the availability of a more general building data model, one must define life and fire safety features of a building before any automatic checking can be performed. Object oriented data structures are beginning to be applied to design objects, since they allow the type versatility demanded by design applications. As one generates a functional view of the main data model, the software user must provide domain specific information. A functional view is defined as the process of generating domain specific data structures from a more general purpose data model, such as defining egress routes from wall or room object data structure. Typically in the early design phase of a project, these are related to the emergency egress design features of a building. Certain decisions such as where to provide sprinkler protection or the location of protected egress ways must be made early in the process.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	c804
authors	Richens, P.
year	1994
title	Does Knowledge really Help?
source	G. Carrara and Y.E. Kalay (Eds.), Knowledge-Based Computer-Aided Architectural Design, Elsevier
summary	The Martin Centre CADLAB has recently been established to investigate software techniques that could be of practical importance to architects within the next five years. In common with most CAD researchers, we are interested in the earlier, conceptual, stages of design, where commercial CAD systems have had little impact. Our approach is not Knowledge-Based, but rather focuses on using the computer as a medium for design and communication. This leads to a concentration on apparently superficial aspects such as visual appearance, the dynamics of interaction, immediate feedback, plasticity. We try to avoid building-in theoretical attitudes, and to reduce the semantic content of our systems to a low level on the basis that flexibility and intelligence are inversely related; and that flexibility is more important. The CADLAB became operational in January 1992. First year work in three areas – building models, experiencing architecture, and making drawings – is discussed.
series	other
more	http://www.arct.cam.ac.uk/research/pubs/
last changed	2003/03/05 13:19

_id	daff
authors	Richens, P.
year	1994
title	CAD Research at the Martin Centre
source	Automation in Construction, No. 3
summary	The Martin Centre CADLAB has recently been established to investigate software techniques that could be of practical importance to architects within the next five years. In common with most CAD researchers, we are interested in the earlier, conceptual, stages of design, where commercial CAD systems have had little impact. Our approach is not Knowledge-Based, but rather focuses on using the computer as a medium for design and communication. This leads to a concentration on apparently superficial aspects such as visual appearance, the dynamics of interaction, immediate feedback, plasticity. We try to avoid building-in theoretical attitudes, and to reduce the semantic content of our systems to a low level on the basis that flexibility and intelligence are inversely related; and that flexibility is more important. The CADLAB became operational in January 1992. First year work in three areas – building models, experiencing architecture, and making drawings – is discussed.
series	journal
email
more	http://www.arct.cam.ac.uk/research/pubs/pdfs/rich94a.pdf
last changed	2000/03/05 19:05

For more results click below: