Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 175

Reformat results as: short short into frame detailed detailed into frame

_id	60e7
authors	Bailey, Rohan
year	2000
title	The Intelligent Sketch: Developing a Conceptual Model for a Digital Design Assistant
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 137-145
doi	https://doi.org/10.52842/conf.acadia.2000.137
summary	The computer is a relatively new tool in the practice of Architecture. Since its introduction, there has been a desire amongst designers to use this new tool quite early in the design process. However, contrary to this desire, most Architects today use pen and paper in the very early stages of design to sketch. Architects solve problems by thinking visually. One of the most important tools that the Architect has at his disposal in the design process is the hand sketch. This iterative way of testing ideas and informing the design process with images fundamentally directs and aids the architect’s decision making. It has been said (Schön and Wiggins 1992) that sketching is about the reflective conversation designers have with images and ideas conveyed by the act of drawing. It is highly dependent on feedback. This “conversation” is an area worthy of investigation. Understanding this “conversation” is significant to understanding how we might apply the computer to enhance the designer’s ability to capture, manipulate and reflect on ideas during conceptual design. This paper discusses sketching and its relation to design thinking. It explores the conversations that designers engage in with the media they use. This is done through the explanation of a protocol analysis method. Protocol analysis used in the field of psychology, has been used extensively by Eastman et al (starting in the early 70s) as a method to elicit information about design thinking. In the pilot experiment described in this paper, two persons are used. One plays the role of the “hand” while the other is the “mind”- the two elements that are involved in the design “conversation”. This variation on classical protocol analysis sets out to discover how “intelligent” the hand should be to enhance design by reflection. The paper describes the procedures entailed in the pilot experiment and the resulting data. The paper then concludes by discussing future intentions for research and the far reaching possibilities for use of the computer in architectural studio teaching (as teaching aids) as well as a digital design assistant in conceptual design.
keywords	CAAD, Sketching, Protocol Analysis, Design Thinking, Design Education
series	ACADIA
last changed	2022/06/07 07:54

_id	cef3
authors	Bridges, Alan H.
year	1992
title	Computing and Problem Based Learning at Delft University of Technology Faculty of Architecture
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 289-294
doi	https://doi.org/10.52842/conf.ecaade.1992.289
summary	Delft University of Technology, founded in 1842, is the oldest and largest technical university in the Netherlands. It provides education for more than 13,000 students in fifteen main subject areas. The Faculty of Architecture, Housing, Urban Design and Planning is one of the largest faculties of the DUT with some 2000 students and over 500 staff members. The course of study takes four academic years: a first year (Propaedeuse) and a further three years (Doctoraal) leading to the "ingenieur" qualification. The basic course material is delivered in the first two years and is taken by all students. The third and fourth years consist of a smaller number of compulsory subjects in each of the department's specialist areas together with a wide range of option choices. The five main subject areas the students may choose from for their specialisation are Architecture, Building and Project Management, Building Technology, Urban Design and Planning, and Housing. The curriculum of the Faculty has been radically revised over the last two years and is now based on the concept of "Problem-Based Learning". The subject matter taught is divided thematically into specific issues that are taught in six week blocks. The vehicles for these blocks are specially selected and adapted case studies prepared by teams of staff members. These provide a focus for integrating specialist subjects around a studio based design theme. In the case of second year this studio is largely computer-based: many drawings are produced by computer and several specially written computer applications are used in association with the specialist inputs. This paper describes the "block structure" used in second year, giving examples of the special computer programs used, but also raises a number of broader educational issues. Introduction of the block system arose as a method of curriculum integration in response to difficulties emerging from the independent functioning of strong discipline areas in the traditional work groups. The need for a greater level of selfdirected learning was recognised as opposed to the "passive information model" of student learning in which the students are seen as empty vessels to be filled with knowledge - which they are then usually unable to apply in design related contexts in the studio. Furthermore, the value of electives had been questioned: whilst enabling some diversity of choice, they may also be seen as diverting attention and resources from the real problems of teaching architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	7ce5
authors	Gal, Shahaf
year	1992
title	Computers and Design Activities: Their Mediating Role in Engineering Education
source	Sociomedia, ed. Edward Barret. MIT Press
summary	Sociomedia: With all the new words used to describe electronic communication (multimedia, hypertext, cyberspace, etc.), do we need another one? Edward Barrett thinks we do; hence, he coins the term "sociomedia." It is meant to displace a computing economy in which technicity is hypostasized over sociality. Sociomedia, a compilation of twenty-five articles on the theory, design and practice of educational multimedia and hypermedia, attempts to re-value the communicational face of computing. Value, of course, is "ultimately a social construct." As such, it has everything to do with knowledge, power, education and technology. The projects discussed in this book represent the leading edge of electronic knowledge production in academia (not to mention major funding) and are determining the future of educational media. For these reasons, Sociomedia warrants close inspection. Barrett's introduction sets the tone. For him, designing computer media involves hardwiring a mechanism for the social construction of knowledge (1). He links computing to a process of social and communicative interactivity for constructing and desseminating knowledge. Through a mechanistic mapping of the university as hypercontext (a huge network that includes classrooms as well as services and offices), Barrett models intellectual work in such a way as to avoid "limiting definitions of human nature or human development." Education, then, can remain "where it should be--in the human domain (public and private) of sharing ideas and information through the medium of language." By leaving education in a virtual realm (where we can continue to disagree about its meaning and execution), it remains viral, mutating and contaminating in an intellectually healthy way. He concludes that his mechanistic model, by means of its reductionist approach, preserves value (7). This "value" is the social construction of knowledge. While I support the social orientation of Barrett's argument, discussions of value are related to power. I am not referring to the traditional teacher-student power structure that is supposedly dismantled through cooperative and constructivist learning strategies. The power to be reckoned with in the educational arena is foundational, that which (pre)determines value and the circulation of knowledge. "Since each of you reading this paragraph has a different perspective on the meaning of 'education' or 'learning,' and on the processes involved in 'getting an education,' think of the hybris in trying to capture education in a programmable function, in a displayable object, in a 'teaching machine'" (7). Actually, we must think about that hybris because it is, precisely, what informs teaching machines. Moreover, the basic epistemological premises that give rise to such productions are too often assumed. In the case of instructional design, the episteme of cognitive sciences are often taken for granted. It is ironic that many of the "postmodernists" who support electronic hypertextuality seem to have missed Jacques Derrida's and Michel Foucault's "deconstructions" of the epistemology underpinning cognitive sciences (if not of epistemology itself). Perhaps it is the glitz of the technology that blinds some users (qua developers) to the belief systems operating beneath the surface. Barrett is not guilty of reactionary thinking or politics; he is, in fact, quite in line with much American deconstructive and postmodern thinking. The problem arises in that he leaves open the definitions of "education," "learning" and "getting an education." One cannot engage in the production of new knowledge without orienting its design, production and dissemination, and without negotiating with others' orientations, especially where largescale funding is involved. Notions of human nature and development are structural, even infrastructural, whatever the medium of the teaching machine. Although he addresses some dynamics of power, money and politics when he talks about the recession and its effects on the conference, they are readily visible dynamics of power (3-4). Where does the critical factor of value determination, of power, of who gets what and why, get mapped onto a mechanistic model of learning institutions? Perhaps a mapping of contributors' institutions, of the funding sources for the projects showcased and for participation in the conference, and of the disciplines receiving funding for these sorts of projects would help visualize the configurations of power operative in the rising field of educational multimedia. Questions of power and money notwithstanding, Barrett's introduction sets the social and textual thematics for the collection of essays. His stress on interactivity, on communal knowledge production, on the society of texts, and on media producers and users is carried foward through the other essays, two of which I will discuss. Section I of the book, "Perspectives...," highlights the foundations, uses and possible consequences of multimedia and hypertextuality. The second essay in this section, "Is There a Class in This Text?," plays on the robust exchange surrounding Stanley Fish's book, Is There a Text in This Class?, which presents an attack on authority in reading. The author, John Slatin, has introduced electronic hypertextuality and interaction into his courses. His article maps the transformations in "the content and nature of work, and the workplace itself"-- which, in this case, is not industry but an English poetry class (25). Slatin discovered an increase of productive and cooperative learning in his electronically- mediated classroom. For him, creating knowledge in the electronic classroom involves interaction between students, instructors and course materials through the medium of interactive written discourse. These interactions lead to a new and persistent understanding of the course materials and of the participants' relation to the materials and to one another. The work of the course is to build relationships that, in my view, constitute not only the meaning of individual poems, but poetry itself. The class carries out its work in the continual and usually interactive production of text (31). While I applaud his strategies which dismantle traditional hierarchical structures in academia, the evidence does not convince me that the students know enough to ask important questions or to form a self-directing, learning community. Stanley Fish has not relinquished professing, though he, too, espouses the indeterminancy of the sign. By the fourth week of his course, Slatin's input is, by his own reckoning, reduced to 4% (39). In the transcript of the "controversial" Week 6 exchange on Gertrude Stein--the most disliked poet they were discussing at the time (40)--we see the blind leading the blind. One student parodies Stein for three lines and sums up his input with "I like it." Another, finds Stein's poetry "almost completey [sic] lacking in emotion or any artistic merit" (emphasis added). On what grounds has this student become an arbiter of "artistic merit"? Another student, after admitting being "lost" during the Wallace Steven discussion, talks of having more "respect for Stevens' work than Stein's" and adds that Stein's poetry lacks "conceptual significance[, s]omething which people of varied opinion can intelligently discuss without feeling like total dimwits...." This student has progressed from admitted incomprehension of Stevens' work to imposing her (groundless) respect for his work over Stein's. Then, she exposes her real dislike for Stein's poetry: that she (the student) missed the "conceptual significance" and hence cannot, being a person "of varied opinion," intelligently discuss it "without feeling like [a] total dimwit." Slatin's comment is frightening: "...by this point in the semester students have come to feel increasingly free to challenge the instructor" (41). The students that I have cited are neither thinking critically nor are their preconceptions challenged by student-governed interaction. Thanks to the class format, one student feels self-righteous in her ignorance, and empowered to censure. I believe strongly in student empowerment in the classroom, but only once students have accrued enough knowledge to make informed judgments. Admittedly, Slatin's essay presents only partial data (there are six hundred pages of course transcripts!); still, I wonder how much valuable knowledge and metaknowledge was gained by the students. I also question the extent to which authority and professorial dictature were addressed in this course format. The power structures that make it possible for a college to require such a course, and the choice of texts and pedagogy, were not "on the table." The traditional professorial position may have been displaced, but what took its place?--the authority of consensus with its unidentifiable strong arm, and the faceless reign of software design? Despite Slatin's claim that the students learned about the learning process, there is no evidence (in the article) that the students considered where their attitudes came from, how consensus operates in the construction of knowledge, how power is established and what relationship they have to bureaucratic insitutions. How do we, as teaching professionals, negotiate a balance between an enlightened despotism in education and student-created knowledge? Slatin, and other authors in this book, bring this fundamental question to the fore. There is no definitive answer because the factors involved are ultimately social, and hence, always shifting and reconfiguring. Slatin ends his article with the caveat that computerization can bring about greater estrangement between students, faculty and administration through greater regimentation and control. Of course, it can also "distribute authority and power more widely" (50). Power or authority without a specific face, however, is not necessarily good or just. Shahaf Gal's "Computers and Design Activities: Their Mediating Role in Engineering Education" is found in the second half of the volume, and does not allow for a theory/praxis dichotomy. Gal recounts a brief history of engineering education up to the introduction of Growltiger (GT), a computer-assisted learning aid for design. He demonstrates GT's potential to impact the learning of engineering design by tracking its use by four students in a bridge-building contest. What his text demonstrates clearly is that computers are "inscribing and imaging devices" that add another viewpoint to an on-going dialogue between student, teacher, earlier coursework, and other teaching/learning tools. The less proficient students made a serious error by relying too heavily on the technology, or treating it as a "blueprint provider." They "interacted with GT in a way that trusted the data to represent reality. They did not see their interaction with GT as a negotiation between two knowledge systems" (495). Students who were more thoroughly informed in engineering discourses knew to use the technology as one voice among others--they knew enough not simply to accept the input of the computer as authoritative. The less-advanced students learned a valuable lesson from the competition itself: the fact that their designs were not able to hold up under pressure (literally) brought the fact of their insufficient knowledge crashing down on them (and their bridges). They also had, post factum, several other designs to study, especially the winning one. Although competition and comparison are not good pedagogical strategies for everyone (in this case the competitors had volunteered), at some point what we think we know has to be challenged within the society of discourses to which it belongs. Students need critique in order to learn to push their learning into auto-critique. This is what is lacking in Slatin's discussion and in the writings of other avatars of constructivist, collaborative and computer-mediated pedagogies. Obviously there are differences between instrumental types of knowledge acquisition and discoursive knowledge accumulation. Indeed, I do not promote the teaching of reading, thinking and writing as "skills" per se (then again, Gal's teaching of design is quite discursive, if not dialogic). Nevertheless, the "soft" sciences might benefit from "bridge-building" competitions or the re-institution of some forms of agonia. Not everything agonistic is inhuman agony--the joy of confronting or creating a sound argument supported by defensible evidence, for example. Students need to know that soundbites are not sound arguments despite predictions that electronic writing will be aphoristic rather than periodic. Just because writing and learning can be conceived of hypertextually does not mean that rigor goes the way of the dinosaur. Rigor and hypertextuality are not mutually incompatible. Nor is rigorous thinking and hard intellectual work unpleasurable, although American anti-intellectualism, especially in the mass media, would make it so. At a time when the spurious dogmatics of a Rush Limbaugh and Holocaust revisionist historians circulate "aphoristically" in cyberspace, and at a time when knowledge is becoming increasingly textualized, the role of critical thinking in education will ultimately determine the value(s) of socially constructed knowledge. This volume affords the reader an opportunity to reconsider knowledge, power, and new communications technologies with respect to social dynamics and power relationships.
series	other
last changed	2003/04/23 15:14

_id	56e9
authors	Huang, Tao-Kuang
year	1992
title	A Graphical Feedback Model for Computerized Energy Analysis during the Conceptual Design Stage
source	Texas A&M University
summary	During the last two decades, considerable effort has been placed on the development of building design analysis tools. Architects and designers have begun to take advantage of computers to generate and examine design alternatives. However, because it has been difficult to adapt computer technologies to the visual orientation of the building designer, the majority of computer applications have been limited to numerical analysis and office automation tasks. Only recently, because of advances in hardware and software techniques, computers have entered into a new phase in the development of architectural design. haveters are now able to interactively display graphics solutions to architectural related problems, which is fundamental to the design process. The majority of research programs in energy efficient design have sharpened people's understanding of energy principles and their application of those principles. Energy conservation concepts, however, have not been widely used. A major problem in the implementation of these principles is that energy principles their applications are abstract, hard to visualize and separated from the architectural design process. Furthermore, one aspect of energy analysis may contain thousands of pieces of numerical information which often leads to confusion on the part of designers. If these difficulties can be overcome, it would bring a great benefit to the advancement of energy conservation concepts. This research explores the concept of an integrated computer graphics program to support energy efficient design. It focuses on (1) the integration of energy efficiently and architectural design, and (2) the visualization of building energy use through graphical interfaces during the conceptual design stage. It involves (1) the discussion of frameworks of computer-aided architectural design and computer-aided energy efficient building design, and (2) the development of an integrated computer prototype program with a graphical interface that helps the designer create building layouts, analyze building energy interactively and receive visual feedbacks dynamically. The goal is to apply computer graphics as an aid to visualize the effects of energy related decisions and therefore permit the designer to visualize and understand energy conservation concepts in the conceptual phase of architectural design.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	ddss9202
id	ddss9202
authors	Koutamanis, A. and Mitossi, V.
year	1993
title	Architectural computer vision: Automated recognition of architectural drawings
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Computer vision offers the ability to transform digitized drawings into documents that can be used with computer systems. Recognition of digitized drawings can occur at the levels of (a) geometric elements, (b) building elements, and (c) spatial articulation. The last two levels apply not only to digitized images but also to computer-produced ones. The enormous burden placed on the user for inputting and manipulating CAD drawings suggests that automated recognition can add to the capabilities of CAD by making the computer more flexible with respect to inputting design information and more responsive to the actual concerns of the designer.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9208
id	ddss9208
authors	Lucardie, G.L.
year	1993
title	A functional approach to realizing decision support systems in technical regulation management for design and construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Technical building standards defining the quality of buildings, building products, building materials and building processes aim to provide acceptable levels of safety, health, usefulness and energy consumption. However, the logical consistency between these goals and the set of regulations produced to achieve them is often hard to identify. Not only the large quantities of highly complex and frequently changing building regulations to be met, but also the variety of user demands and the steadily increasing technical information on (new) materials, products and buildings have produced a very complex set of knowledge and data that should be taken into account when handling technical building regulations. Integrating knowledge technology and database technology is an important step towards managing the complexity of technical regulations. Generally, two strategies can be followed to integrate knowledge and database technology. The main emphasis of the first strategy is on transferring data structures and processing techniques from one field of research to another. The second approach is concerned exclusively with the semantic structure of what is contained in the data-based or knowledge-based system. The aim of this paper is to show that the second or knowledge-level approach, in particular the theory of functional classifications, is more fundamental and more fruitful. It permits a goal-directed rationalized strategy towards analysis, use and application of regulations. Therefore, it enables the reconstruction of (deep) models of regulations, objects and of users accounting for the flexibility and dynamics that are responsible for the complexity of technical regulations. Finally, at the systems level, the theory supports an effective development of a new class of rational Decision Support Systems (DSS), which should reduce the complexity of technical regulations and restore the logical consistency between the goals of technical regulations and the technical regulations themselves.
series	DDSS
last changed	2003/08/07 16:36

_id	677b
authors	Mohsini, R.A.
year	1992
title	On Measuring Project Performance : Some Problems of Aggregation
source	New York: John Wiley & Sons, 1992. pp. 239-249 : tables. includes bibliography
summary	Performance evaluation of buildings--by means of postconstruction evaluation--has traditionally focused on the performance measurement of building subsystems. This approach, based on the horizontal view of the building process, suffers from two important shortcomings. First, its underlying assumption that a completed building's performance can be arrived at simply by aggregating the individual performances of its parts is not valid. Like most complex systems, a completed building is much more than the sum of its parts. Second, the focus of traditional appraisal on subsystems, with its feedback information on individual products and services, actively encourages suboptimization of tasks. It is a condition that is contrary to the requirements imposed by the multiorganizational nature of the building team, and the resulting interdependence of tasks, where useful feedback information is that which relates to the project as a whole. To overcome these shortcomings of the traditional building appraisal model, an alternative model based on the vertical view of the building process is proposed
keywords	construction, management, building, multicriteria, evaluation, performance
series	CADline
last changed	2003/06/02 13:58

_id	a3f5
authors	Zandi-Nia, Abolfazl
year	1992
title	Topgene: An artificial Intelligence Approach to a Design Process
source	Delft University of Technology
summary	This work deals with two architectural design (AD) problems at the topological level and in presence of the social norms community, privacy, circulation-cost, and intervening opportunity. The first problem concerns generating a design with respect to a set of above mentioned norms, and the second problem requires evaluation of existing designs with respect to the same set of norms. Both problems are based on the structural-behavioral relationship in buildings. This work has challenged above problems in the following senses: (1) A working system, called TOPGENE (The TOpological Pattern GENErator) has been developed. (2) Both problems may be vague and may lack enough information in their statement. For example, an AD in the presence of the social norms requires the degrees of interactions between the location pairs in the building. This information is not always implicitly available, and must be explicated from the design data. (3) An AD problem at topological level is intractable with no fast and efficient algorithm for its solution. To reduce the search efforts in the process of design generation, TOPGENE uses a heuristic hill climbing strategy that takes advantage of domain specific rules of thumbs to choose a path in the search space of a design. (4) TOPGENE uses the Q-analysis method for explication of hidden information, also hierarchical clustering of location-pairs with respect to their flow generation potential as a prerequisite information for the heuristic reasoning process. (5) To deal with a design of a building at topological level TOPGENE takes advantage of existing graph algorithms such as path-finding and planarity testing during its reasoning process. This work also presents a new efficient algorithm for keeping track of distances in a growing graph. (6) This work also presents a neural net implementation of a special case of the design generation problem. This approach is based on the Hopfield model of neural networks. The result of this approach has been used test TOPGENE approach in generating designs. A comparison of these two approaches shows that the neural network provides mathematically more optimal designs, while TOPGENE produces more realistic designs. These two systems may be integrated to create a hybrid system.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	cb5a
authors	Oxman, Rivka E.
year	1992
title	Multiple Operative and Interactive Modes in Knowledge-Based Design Systems
source	New York: John Wiley & Sons, 1992. pp. 125-143 : ill. includes bibliography
summary	A conceptual basis for the development of an expert system which is capable of integrating various modes of generation and evaluation in design is presented. This approach is based upon two sets of reasoning processes in the design system. The first enables a mapping between design requirements and solution descriptions in a generative mode of design; and the second enables a mapping between solution descriptions and performance evaluation in an evaluative and predictive mode. This concept supports a formal framework necessary for a knowledge-based design system to operate in a design partnership relation with the designer. Another fundamental concept in expert systems for design, dual direction interpretation between graphic and textual modes, is presented and elaborated. This encoding of knowledge behind the geometrical representation can be achieved in knowledge- based design systems by the development of a 'semantic interpreter' which supports a dual direction mapping process employing a geometrical knowledge, typological knowledge and evaluative knowledge. An implemented expert system for design, PREDIKT, demonstrates these concepts in the domain of kitchen design. It provides the user with a choice of alternative modes of interaction, such as: a 'design critic' for the evaluation of a design, a 'design generator' for the generation of a design, or a 'design critic-generator' for the completion of partial solutions
keywords	architecture, knowledge base, design, systems, expert systems
series	CADline
email
last changed	2003/06/02 10:24

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	6cfd
authors	Harfmann, Anton C. and Majkowski, Bruce R.
year	1992
title	Component-Based Spatial Reasoning
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 103-111
doi	https://doi.org/10.52842/conf.acadia.1992.103
summary	The design process and ordering of individual components through which architecture is realized relies on the use of abstract "models" to represent a proposed design. The emergence and use of these abstract "models" for building representation has a long history and tradition in the field of architecture. Models have been made and continue to be made for the patron, occasionally the public, and as a guide for the builders. Models have also been described as a means to reflect on the design and to allow the design to be in dialogue with the creator. The term "model" in the above paragraph has been used in various ways and in this context is defined as any representation through which design intent is expressed. This includes accurate/ rational or abstract drawings (2- dimensional and 3-dimensional), physical models (realistic and abstract) and computer models (solid, void and virtual reality). The various models that fall within the categories above have been derived from the need to "view" the proposed design in various ways in order to support intuitive reasoning about the proposal and for evaluation purposes. For example, a 2-dimensional drawing of a floor plan is well suited to support reasoning about spatial relationships and circulation patterns while scaled 3-dimensional models facilitate reasoning about overall form, volume, light, massing etc. However, the common denominator of all architectural design projects (if the intent is to construct them in actual scale, physical form) are the discrete building elements from which the design will be constructed. It is proposed that a single computational model representing individual components supports all of the above "models" and facilitates "viewing"' the design according to the frame of reference of the viewer. Furthermore, it is the position of the authors that all reasoning stems from this rudimentary level of modeling individual components. The concept of component representation has been derived from the fact that a "real" building (made from individual components such as nuts, bolts and bar joists) can be "viewed" differently according to the frame of reference of the viewer. Each individual has the ability to infer and abstract from the assemblies of components a variety of different "models" ranging from a visceral, experiential understanding to a very technical, physical understanding. The component concept has already proven to be a valuable tool for reasoning about assemblies, interferences between components, tracing of load path and numerous other component related applications. In order to validate the component-based modeling concept this effort will focus on the development of spatial understanding from the component-based model. The discussions will, therefore, center about the representation of individual components and the development of spatial models and spatial reasoning from the component model. In order to frame the argument that spatial modeling and reasoning can be derived from the component representation, a review of the component-based modeling concept will precede the discussions of spatial issues.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	181b
authors	Liou, Shuenn-Ren
year	1992
title	A computer-based framework for analyzing and deriving the morphological structure of architectural designs
source	University of Michigan
summary	An approach to the acquisition and utilization of knowledge about the morphological structure of notable orthogonal building plans and other two-dimensional compositions is formulated and tested. This approach consists of two levels of abstraction within which the analysis and comparison of existing designs and the derivation of new designs can be undertaken systematically and efficiently. Specifically, the morphological structure of orthogonal building plans and other two-dimensional compositions is conceived as a language defined by shape grammar and architectural grammar corresponding to the geometric and spatial structures of the compositions. Lines constitute the shape grammar and walls and columns the architectural grammar. A computer program named ANADER is designed and implemented using the C++ object-oriented language to describe feasible compositions. It is argued that the gap between morphological analysis and synthesis is bridged partially because the proposed framework facilitates systematic comparisons of the morphological structures of two-dimensional orthogonal compositions and provides insight into the form-making process used to derive them. As an analytical system, the framework contributes to the generation of new and the assessment of existing morphological knowledge. Specifically, it is demonstrated that it is feasible to specify an existing architectural design by a set of universal rule schemata and the sequence of their application. As a generative system, the framework allows many of the tasks involved in the derivation of two-dimensional orthogonal compositions to be carried out. As well, it promotes the use of analytical results. In conclusion, it is argued that the proposed computer-based framework will provide the research and the educator with increasing opportunities for addressing persistent architectural questions in new ways. Of particular interest to this author are questions concerning the decision-making activities involved in form- and space-making as well as the description, classification, and derivation of architecutural form and space. It is suggested that, at least in reference to the cases examined, but probably also in reference to many other morphological classes, these and other related questions can be addressed systematically, efficiently, and fruitfully by using the proposed framework.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	65aa
authors	Madrazo, Leandro
year	1992
title	From Sketches to Computer Images: A Strategy for the Application of Computers in Architectural Design
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 331-350
doi	https://doi.org/10.52842/conf.ecaade.1992.331
summary	The use of computer tools in architectural practice has been steadily increasing in recent years. Many architectural offices are already using computer tools, mostly for production tasks. Hardly any design is being done with the computer. With the new computer tools, architects are confronted with the challenge to use computers to express their design ideas right from conception. This paper describes a project made for a competition which recently took place in Spain. Sketches and computer models were the only tools used in designing this project. A variety of computer tools were used in different stages of this project: two dimensional drawing tools were used in the early stages, then a three-dimensional modeling program for the development of the design and for the production of final drawings, and a rendering program for final presentation images.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	e0ee
authors	Martens, Bob
year	1992
title	Tools for Visual Simulation of Space and their Use by Students
source	Architecture & Behaviour vol. 8, no. 3:175-187
summary	Most visual representations of architectural space are still done using drawings of ground plan, section and view. Yet, when experience is lacking - as with students or laypeople these two-dimensional representations hardly show their correspondence to a three-dimensional reality. This article examines the various visual techniques for spatial simulation available today and their implementation by students involved with architectural projects.
series	journal paper
email
last changed	2003/04/23 15:50

_id	9092
authors	Martens, Bob
year	1992
title	TOOLS FOR VISUAL SIMULATION OF SPACE AND THEIR USE BY STUDENTS
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part B, pp. 33-38
summary	Most visual representations of architectural space are still done using drawings of ground plan, section and view. Yet, when experience is lacking - as with students or laypeople - these two-dimensional representations hardly show their correspondence to a three-dimensional reality. This article examines the various visual techniques for spatial simulation available today and their implementation by students involved with architectural projects.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:39

_id	0ff4
authors	Woodbury, R.F., Radford, A.D., Taplin, P.N. and Coppins, S.A.
year	1992
title	Tartan Worlds: A Generative Symbol Grammar System
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 211-220
doi	https://doi.org/10.52842/conf.acadia.1992.211
summary	Tartan Worlds is a highly interactive, generative symbol grammar system that generates designs as two dimensional configurations of symbols on tartan grids. It operates with multiple graphical rule sets on multiple design worlds. Designers can operate directly on rules and worlds. In this chapter we will introduce the system Tartan Worlds as implemented on the Apple Macintosh.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	a6d8
authors	Baletic, Bojan
year	1992
title	Information Codes of Mutant Forms
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 173-186
doi	https://doi.org/10.52842/conf.ecaade.1992.173
summary	If we assume that the statements from this quote are true, than we have to ask ourselves the question: "Should we teach architecture as we do?" This paper describes our experience in developing a knowledge base using a neural network system to serve as a "intelligent assistant" to students and other practicing architects in the conceptual phase of their work on housing design. Our approach concentrated on rising the awareness of the designer about the problem, not by building rules to guide him to a solution, but by questioning the categories and typologies by which he classifies and understands a problem. This we achieve through examples containing mutant forms, imperfect rules, gray zones between black and white, that carry the seeds of new solutions.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	065b
authors	Beitia, S.S., Zulueta, A. and Barrallo, J.
year	1995
title	The Virtual Cathedral - An Essay about CAAD, History and Structure
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 355-360
doi	https://doi.org/10.52842/conf.ecaade.1995.355
summary	The Old Cathedral of Santa Maria in Vitoria is the most representative building of the Gothic style in the Basque Country. Built during the XIV century, it has been closed to the cult in 1994 because of the high risk of collapse that presents its structure. This closure was originated by the structural analysis that was entrusted to the University of the Basque Country in 1992. The topographic works developed in the Cathedral to elaborate the planimetry of the temple revealed that many structural elements of great importance like arches, buttresses and flying buttresses were removed, modified or added along the history of Santa Maria. The first structural analysis made in the church suggested that the huge deformations showed in the resistant elements, specially the piers, were originated by interventions made in the past. A deep historical investigation allowed us to know how the Cathedral was built and the changes executed until our days. With this information, we started the elaboration of a virtual model of the Cathedral of Santa Maria. This model was introduced into a Finite Elements Method system to study the deformations suffered in the church during its construction in the XIV century, and the intervention made later in the XV, XVI and XX centuries. The efficiency of the virtual model simulating the geometry of the Cathedral along history allowed us to detect the cause of the structural damage, that was finally found in many unfortunate interventions along time.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_43.htm
last changed	2022/06/07 07:54

_id	sigradi2017_068
id	sigradi2017_068
authors	da Motta Gaspar, João Alberto; Regina Coeli Ruschel
year	2017
title	A evolução do significado atribuído ao acrônimo BIM: Uma perspectiva no tempo [The evolution of the meaning ascribed to the acronym BIM: A perspective in time]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.461-469
summary	The term Building Information Model emerged in 1992. It has evolved over time and has its meaning currently associated with an object-oriented modeling technology and an associated set of processes to produce, communicate and analyze building models. Its origin is related to several other, older terms. This paper registers the evolution of BIM and related definitions over time by means of a systematic literature review. We present a list of BIM-related terms and their meanings, organized by date of emergence, and charts showing which ones are most used over time, contributing to better understanding of the meaning of BIM.
keywords	BIM; History of BIM; Building Information Model.
series	SIGRADI
email
last changed	2021/03/28 19:58

For more results click below: