Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 75

Reformat results as: short short into frame detailed detailed into frame

_id	2cb4
authors	Bille, Pia
year	1992
title	CAD at the AAA
doi	https://doi.org/10.52842/conf.ecaade.1992.279
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 279-288
summary	Teaching computer science at the Aarhus School of Architecture goes back as far as to the beginning of the 80’s, when a few teachers and students were curious towards the new media seeing its great developing perspectives and its possible use in the design of architecture. The curiosity and excitement about technology continued, although the results were modest and the usefulness not a dominant aspect in this early period. In the middle of the 80’s the School of Architecture was given the opportunity by means of state funding to buy the first 10 IBM PC's to run AutoCad among other programmes. Beside this a bigger CAD-system Gable 4D Series was introduced running on MicroVax Workstations. The software was dedicated to drafting buildings in 2 and 3 dimensions - an important task within the profession of architects.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ddss9211
id	ddss9211
authors	Gilleard, J. and Olatidoye, O.
year	1993
title	Graphical interfacing to a conceptual model for estimating the cost of residential construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper presents a method for determining elemental square foot costs and cost significance for residential construction. Using AutoCAD's icon menu and dialogue box' facilities, a non-expert may graphically select (i) residential configuration; (ii) construction quality level; (iii) geographical location; (iv) square foot area; and finally, (v) add-ons, e.g. porches and decks, basement, heating and cooling equipment, garages and carports etc. in order to determine on-site builder's costs. Subsequent AutoLisp routines facilitate data transfer to a Lotus 1-2-3 spreadsheet where an elemental cost breakdown for the project may be determined. Finally, using Lotus 1-2-3 macros, computed data is transferred back to AutoCAD, where all cost significant items are graphically highlighted.
series	DDSS
last changed	2003/08/07 16:36

_id	ea96
authors	Hacfoort, Eek J. and Veldhuisen, Jan K.
year	1992
title	A Building Design and Evaluation System
source	New York: John Wiley & Sons, 1992. pp. 195-211 : ill. table. includes bibliography
summary	Within the field of architectural design there is a growing awareness of imbalance among the professionalism, the experience, and the creativity of the designers' response to the up-to-date requirements of all parties interested in the design process. The building design and evaluating system COSMOS makes it possible for various participants to work within their own domain, so that separated but coordinated work can be done. This system is meant to organize the initial stage of the design process, where user-defined functions, geometry, type of construction, and building materials are decided. It offers a tool to design a building to calculate a number of effects and for managing the information necessary to evaluate the design decisions. The system is provided with data and sets of parameters for describing the conditions, along with their properties, of the main building functions of a selection of well-known building types. The architectural design is conceptualized as being a hierarchy of spatial units, ranking from building blocks down to specific rooms or spaces. The concept of zoning is used as a means of calculating and directly evaluating the structure of the design without working out the details. A distinction is made between internal and external calculations and evaluations during the initial design process. During design on screen, an estimation can be recorded of building costs, energy costs, acoustics, lighting, construction, and utility. Furthermore, the design can be exported to a design application program, in this case AutoCAD, to make and show drawings in more detail. Through the medium of a database, external calculation and evaluation of building costs, life-cycle costs, energy costs, interior climate, acoustics, lighting, construction, and utility are possible in much more advanced application programs
keywords	evaluation, applications, integration, architecture, design, construction, building, energy, cost, lighting, acoustics, performance
series	CADline
last changed	2003/06/02 13:58

_id	2c22
authors	O'Neill, Michael J.
year	1992
title	Neural Network Simulation as a Computer- Aided design Tool For Predicting Wayfinding Performance
source	New York: John Wiley & Sons, 1992. pp. 347-366 : ill. includes bibliography
summary	Complex public facilities such as libraries, hospitals, and governmental buildings often present problems to users who must find their way through them. Research shows that difficulty in wayfinding has costs in terms of time, money, public safety, and stress that results from being lost. While a wide range of architectural research supports the notion that ease of wayfinding should be a criterion for good design, architects have no method for evaluating how well their building designs will support the wayfinding task. People store and retrieve information about the layout of the built environment in a knowledge representation known as the cognitive map. People depend on the information stored in the cognitive map to find their way through buildings. Although there are numerous simulations of the cognitive map, the mechanisms of these models are not constrained by what is known about the neurophysiology of the brain. Rather, these models incorporate search mechanisms that act on semantically encoded information about the environment. In this paper the author describes the evaluation and application of an artificial neural network simulation of the cognitive map as a means of predicting wayfinding behavior in buildings. This simulation is called NAPS-PC (Network Activity Processing Simulator--PC version). This physiologically plausible model represents knowledge about the layout of the environment through a network of inter-connected processing elements. The performance of NAPS-PC was evaluated against actual human wayfinding performance. The study found that the simulation generated behavior that matched the performance of human participants. After the validation, NAPS-PC was modified so that it could read environmental information directly from AutoCAD (a popular micro-computer-based CAD software package) drawing files, and perform 'wayfinding' tasks based on that environmental information. This prototype tool, called AutoNet, is conceptualized as a means of allowing designers to predict the wayfinding performance of users in a building before it is actually built
keywords	simulation, cognition, neural networks, evaluation, floor plans, applications, wayfinding, layout, building
series	CADline
last changed	2003/06/02 13:58

_id	46c7
id	46c7
authors	Ozel, Filiz
year	1992
title	Data Modeling Needs of Life Safety Code (LSC) Compliance Applications
doi	https://doi.org/10.52842/conf.acadia.1992.177
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 177-185
summary	One of the most complex code compliance issues originates from the conformance of designs to Life Safety Code (NFPA 101). The development of computer based code compliance checking programs attracted the attention of building researchers and practitioners alike. These studies represent a number of approaches ranging from CAD based procedural approaches to rule based, non graphic ones, but they do not address the interaction of the rule base of such systems with graphic data bases that define the geometry of architectural objects. Automatic extraction of the attributes and the configuration of building systems requires 11 architectural object - graphic entity" data models that allow access and retrieval of the necessary data for code compliance checking. This study aims to specifically focus on the development of such a data model through the use of AutoLISP feature of AutoCAD (Autodesk Inc.) graphic system. This data model is intended to interact with a Life Safety Code rule base created through Level5-Object (Focus Inc.) expert system. Assuming the availability of a more general building data model, one must define life and fire safety features of a building before any automatic checking can be performed. Object oriented data structures are beginning to be applied to design objects, since they allow the type versatility demanded by design applications. As one generates a functional view of the main data model, the software user must provide domain specific information. A functional view is defined as the process of generating domain specific data structures from a more general purpose data model, such as defining egress routes from wall or room object data structure. Typically in the early design phase of a project, these are related to the emergency egress design features of a building. Certain decisions such as where to provide sprinkler protection or the location of protected egress ways must be made early in the process.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	3393
authors	Gesner, R. and Smith, J.
year	1992
title	Maximizing AutoLisp
source	NRP, Carmel, Indiana, USA
summary	This revision provides coverage of AutoLISP and assumes no previous programming knowledge. The text covers the spectrum from the very basics of programming to sophisticated developer tricks. Offering a range of tips for increasing productivity, the guide covers all AutoLISP functions, including both undocumented features and functions, as well as the latest Release 13 modifications.
series	other
last changed	2003/04/23 15:14

_id	592a
authors	Takemura, H. and Kishino, F.
year	1992
title	Cooperative work environment using virtual workspace
source	Proceedings of the Conference on Computer-Supported Cooperative Work: 226-232. New York: The Association for Computing Machinery
summary	A virtual environment, which is created by computer graphics and an appropriate user interface, can be used in many application fields, such as teleopetution, telecommunication and real time simulation. Furthermore, if this environment could be shared by multiple users, there would be more potential applications. Discussed in this paper is a case study of building a prototype of a cooperative work environment using a virtual environment, where more than two people can solve problemscooperatively, including design strategies and implementirig issues. An environment where two operators can directly grasp, move or release stereoscopic computer graphics images by hand is implemented. The system is built by combining head position tracking stereoscopic displays, hand gesture input devices and graphics workstations. Our design goal is to utilize this type of interface for a future teleconferencing system. In order to provide good interactivity for users, we discuss potential bottlenecks and their solutions. The system allows two users to share a virtual environment and to organize 3-D objects cooperatively.
series	other
last changed	2003/04/23 15:50

_id	3ff5
authors	Abbo, I.A., La Scalea, L., Otero, E. and Castaneda, L.
year	1992
title	Full-Scale Simulations as Tool for Developing Spatial Design Ability
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part C, pp. 7-10
summary	Spatial Design Ability has been defined as the capability to anticipate effects (psychological impressions on potential observers or users) produced by mental manipulation of elements of architectural or urban spaces. This ability, of great importance in choosing the appropriate option during the design process, is not specifically developed in schools of architecture and is partially obtained as a by-product of drawing, designing or architectural criticism. We use our Laboratory as a tool to present spaces to people so that they can evaluate them. By means of a series of exercises, students confront their anticipations with the psychological impressions produced in other people. For this occasion, we present an experience in which students had to propose a space for an exhibition hag in which architectural projects (student thesis) were to be shown. Following the Spatial Design Ability Development Model which we have been using for several years, students first get acquainted with the use of evaluation instruments for psychological impressions as well as with research methodology. In this case, due to the short period available, we reduced research to investigate the effects produced by the manipulation of only 2 independents variables: students manipulated first the form of the roof, walls and interiors elements, secondly, color and texture of those elements. They evaluated spatial quality, character and the other psychological impressions that manipulations produced in people. They used three dimensional scale models 1/10 and 1/1.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
email
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	6208
authors	Abou-Jaoude, Georges
year	1992
title	To Master a Tool
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part B, p. 15
summary	The tool here is the computer or to be precise, a unit that includes the computer, the peripherals and the software needed to fulfill a task. These tools are getting very sophisticated and user interfaces extremly friendly, therefore it is very easy to become the slave of such electronic tools and reach self satisfaction with strait forward results and attractive images. In order to master and not to become slaves of sophisticated tools, a very solid knowledge of related fields or domains of application becomes necessary. In the case of this seminar, full scale modelling, is a way to understand the relation between a mental model and it's full-scale modelling, it is a way of communicating what is in a designers mind. Computers and design programs can have the same goal, rather than chosing one method or the other let us try to say how important it is today to complement designing with computer with other means and media such as full scale modelling, and what computer modelling and simulation can bring to full scale modelling or other means.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	4704
authors	Amirante, I., Rinaldi, S. and Muzzillo, F.
year	1992
title	A Tutorial Experiment Concerning Dampness Diagnosis Supported by an Expert System
doi	https://doi.org/10.52842/conf.ecaade.1992.159
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 159-172
summary	(A) The teaching of Technology of Building Rehabilitation in Italian Universities - (B) Experimental course of technological rehabilitation with computer tools - (C) Synthesis of technological approach - (D) Dampness diagnostic process using the Expert System - (E) Primary consideration on tutorial experience - (F) Bibliography
series	eCAADe
last changed	2022/06/07 07:54

_id	735a
authors	Anh, Tran Hoai
year	1992
title	FULL-SCALE EXPERIMENT ON KITCHEN FUNCTION IN HANOI
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part A, pp. 19-30
summary	This study is a part of a licentiate thesis on "Functional kitchen for the Vietnamese cooking way"at the Department of Architecture and Development studies, Lund University. The issues it is dealing with are: (1) Inadequacy of kitchen design in the apartment buildings in Hanoi, where the kitchen is often designed as a mere cooking place - other parts of the food making process are not given any attention. (2) Lack of standard dimensional and planning criteria for functional kitchen which can serve as bases for kitchen design. // The thesis aims at finding out indicators on functional spatial requirements for kitchen, which can serve as guide-line for designing functional kitchen for Hanoi. One of the main propositions in the thesis is that functional kitchens for Hanoi should be organised to permit the culinary activities done according to the Vietnamese urban culinary practice. This is based on the concept that the culinary activity is an expression Of culture, thus the practice of preparing meal in the present context of the urban households in Hanoi has an established pattern, method which demand a suitable area and arrangement in the kitchen. This pattern and cooking method should make up the functional requirement for kitchen in Hanoi, and be taken in to account if functional kitchen designing is to be achieved. In the context of the space-limited apartment building of Hanoi, special focus is given to find out indicators on the minimum functional spatial requirements of the kitchen works.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:29

_id	7291
authors	Arvesen, Liv
year	1992
title	Measures and the Unmeasurable
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part C, pp. 11-16
summary	Nowhere do we ever find a similar environment as the one related to the tea ceremony. We may learn from the teamasters as we may learn from our masters of architecture. Directly and indirectly we are influenced by our surroundings which have been proved by research and which we ourselves experience in our daily life. The full scale experiments have been made on this subject. Related to the nervous mind the experiments were concentrated of form expressing safety and peace.
keywords	Full-scale Modeling,Model Simulation, Real Environments
series	other
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	0293
authors	Asanowicz, A., Jakimowicz, A., Koperski, A. And Sawicki, B.
year	1992
title	Education Center of Computer Aided Design: Technical University of Bialystok, Poland - Hopes, Possibilities, Limitations.
doi	https://doi.org/10.52842/conf.ecaade.1992.267
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 267-272
summary	This paper describes a Project of Professional Computer Aided Design Education in Bialystock (Poland).
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6270
authors	Atac, Ibrahim
year	1992
title	CAAD Education and Post-Graduate Opportunities (At Mimar Sinan University)
doi	https://doi.org/10.52842/conf.ecaade.1992.273
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 273-278
summary	This paper addresses new design teaching strategies at an important and traditional university in Istanbul, founded as the Academy of Fine Arts 110 years ago. It will include a short review of design education before the Academy changed into a university, and a description of the present situation with regard to computers. Nearly two years ago, CAAD education was introduced as an elective subject. The students show great interest in CAD; most Turkish architects now work with computers and CAAD graphics, although automated architecture has not yet become firmly established. The aim of the CAD studio is also to establish an institute which will allow university staff to develop their own programs and to pursue scientific research in this field. On the basis of rising requests from researchers and students, rapid and healthy developments should be made to keep up with new technologies. As the improvement of the specialized involvement with CAD is the future target, MSU is attempting to broaden its horizon by including design methodologies of the last decades.
series	eCAADe
last changed	2022/06/07 07:54

_id	ascaad2022_043
id	ascaad2022_043
authors	Awan, Abeeha; Prokop, Simon; Vele, Jiri; Dounas, Theodor; Lombardi, Davide; Agkathidis, Asterios; Kurilla, Lukas
year	2022
title	Qualitative Knowledge Graph for the Evaluation of Metaverse(s) - Is the Metaverse Hype or a Promising New Field for Architects?
source	Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 99-116
summary	With the advancement of augmented and virtual reality technologies both in scale as well as accessibility, the Metaverse (Stephenson, 1992, Hughes, 2022) has emerged as a new digital space with potential for the application of architectural creativity and design. With blockchain integration, the concept of the Metaverse shows promise in creating a “decentralised” space for design and creativity with rewards for its participants. As a platform that incorporates these technological components, does the Metaverse have utility for architectural design? Is there something truly novel in what the Metaverse brings to architectural computing, and architectural design? The paper constructs a qualitative knowledge graph that can be used for the evaluation of various kinds of Metaverses in and for architectural design. We use Design Science Research methods to develop the knowledge graph and its evaluative capacity, stemming from our experience with two Metaverses, Decentraland and Cryptovoxels. The paper concludes with a discussion of knowledge and practice gaps that are evident, framing the opportunities that architects might have in the future in terms of developing Metaverse(s).
series	ASCAAD
email
last changed	2024/02/16 13:24

_id	a6d8
authors	Baletic, Bojan
year	1992
title	Information Codes of Mutant Forms
doi	https://doi.org/10.52842/conf.ecaade.1992.173
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 173-186
summary	If we assume that the statements from this quote are true, than we have to ask ourselves the question: "Should we teach architecture as we do?" This paper describes our experience in developing a knowledge base using a neural network system to serve as a "intelligent assistant" to students and other practicing architects in the conceptual phase of their work on housing design. Our approach concentrated on rising the awareness of the designer about the problem, not by building rules to guide him to a solution, but by questioning the categories and typologies by which he classifies and understands a problem. This we achieve through examples containing mutant forms, imperfect rules, gray zones between black and white, that carry the seeds of new solutions.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	aa78
authors	Bayazit, Nigan
year	1992
title	Requirements of an Expert System for Design Studios
doi	https://doi.org/10.52842/conf.ecaade.1992.187
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 187-194
summary	The goal of this paper is to study problems of the transition from traditional architectural studio teaching to CAAD studio teaching which requires a CAAD expert system as studio tutor, and to study the behavior of the student in this new environment. The differences between the traditional and computerized studio teaching and the experiences in this field are explained referring to the requirements for designing time in relation to the expertise of the student in the application of a CAD program. Learning styles and the process of design in computerized and non-computerized studio teaching are discussed. Design studio requirements of the students in traditional studio environment while doing design works are clarified depending on the results of an empirical study which explained the relations between the tutor and the student while they were doing studio critiques. Main complaints of the students raised in the empirical study were the lack of data in the specific design problem area, difficulties of realization of ideas and thoughts, not knowing the starting point of design, having no information about the references to be used for the specific design task, having difficulties in the application of presentation techniques. In the concluding parts of the paper are discussed the different styles of teaching and their relation to the CAAD environment, the transformation of the instructional programs for the new design environment, the future expectations from the CAAD programs, properties of the new teaching environment and the roles of the expert systems in design studio education.
keywords	CAAD Education, Expert System, Architectural Design Studio, Knowledge Acquisition
series	eCAADe
email
last changed	2022/06/07 07:54

_id	e039
authors	Bertin, Vito
year	1992
title	Structural Transformations (Basic Architectural Unit 6)
doi	https://doi.org/10.52842/conf.ecaade.1992.413
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 413-426
summary	While the teaching of the phenomenon of form as well as space is normally seen within an environment of free experimentation and personal expression, other directions prove to be worth of pursuit. The proposed paper represents such an exploration. The generation of controlled complexity and structural transformations have been the title of the project which forms the base of this paper. In it, the potential for creative development of the student was explored in such a way, that as in the sciences a process can be reproduced or an exploration utilized in further experimentation. The cube as a well proven B.A.U. or basic architectural unit has again been used in our work. Even a simple object like a cube has many properties. As properties are never pure, but always related to other properties, and looking at a single property as a specific value of a variable, it is possible to link a whole field of objects. These links provide a network of paths through which exploration and development is possible. The paper represents a first step in a direction which we think will compliment the already established basic design program.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	8d37
authors	Bradford, J.W., Ng, F.F. and Will, B.F.
year	1992
title	Models and Hypermedia for Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1992.019
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 19-42
summary	Hypermedia uses the hypertext style of interactive navigation through computer-based multimedia materials to provide access to a wealth of information for use by teachers and students. Academic disciplines concerned about the enlightenment of future designers of the built environment require an additional medium not yet available in hypermedia - interactive 3-D computer models. This paper discusses a hypermedia CAI system currently being developed at the University of Hong Kong for use in architectural education. The system uses interactive 3D computer models as another medium for instructional information, and as user orientation and database access devices. An object oriented, 3-D model hierarchy is used as the organizational structure for the database. A prototype which uses the system to teach undergraduate architecture students about a traditional Chinese temple is also illustrated. The prototype demonstrates the use of a computer as the medium for bilingual English and Chinese instruction.
keywords	3-D Modelling, Architectural Education, Computer Aided Instruction, Hypermedia, Multimedia
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cef3
authors	Bridges, Alan H.
year	1992
title	Computing and Problem Based Learning at Delft University of Technology Faculty of Architecture
doi	https://doi.org/10.52842/conf.ecaade.1992.289
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 289-294
summary	Delft University of Technology, founded in 1842, is the oldest and largest technical university in the Netherlands. It provides education for more than 13,000 students in fifteen main subject areas. The Faculty of Architecture, Housing, Urban Design and Planning is one of the largest faculties of the DUT with some 2000 students and over 500 staff members. The course of study takes four academic years: a first year (Propaedeuse) and a further three years (Doctoraal) leading to the "ingenieur" qualification. The basic course material is delivered in the first two years and is taken by all students. The third and fourth years consist of a smaller number of compulsory subjects in each of the department's specialist areas together with a wide range of option choices. The five main subject areas the students may choose from for their specialisation are Architecture, Building and Project Management, Building Technology, Urban Design and Planning, and Housing. The curriculum of the Faculty has been radically revised over the last two years and is now based on the concept of "Problem-Based Learning". The subject matter taught is divided thematically into specific issues that are taught in six week blocks. The vehicles for these blocks are specially selected and adapted case studies prepared by teams of staff members. These provide a focus for integrating specialist subjects around a studio based design theme. In the case of second year this studio is largely computer-based: many drawings are produced by computer and several specially written computer applications are used in association with the specialist inputs. This paper describes the "block structure" used in second year, giving examples of the special computer programs used, but also raises a number of broader educational issues. Introduction of the block system arose as a method of curriculum integration in response to difficulties emerging from the independent functioning of strong discipline areas in the traditional work groups. The need for a greater level of selfdirected learning was recognised as opposed to the "passive information model" of student learning in which the students are seen as empty vessels to be filled with knowledge - which they are then usually unable to apply in design related contexts in the studio. Furthermore, the value of electives had been questioned: whilst enabling some diversity of choice, they may also be seen as diverting attention and resources from the real problems of teaching architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: