Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 246

Reformat results as: short short into frame detailed detailed into frame

_id	2312
authors	Carrara, G., Kalay Y.E. and Novembri, G.
year	1992
title	Multi-modal Representation of Design Knowledge
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 55-66
doi	https://doi.org/10.52842/conf.ecaade.1992.055
summary	Explicit representation of design knowledge is needed if scientific methods are to be applied in design research, and if computers are to be used in the aid of design education and practice. The representation of knowledge in general, and design knowledge in particular, have been the subject matter of computer science, design methods, and computer-aided design research for quite some time. Several models of design knowledge representation have been developed over the last 30 years, addressing specific aspects of the problem. This paper describes a different approach to design knowledge representation that recognizes the multimodal nature of design knowledge. It uses a variety of computational tools to encode different kinds of design knowledge, including the descriptive (objects), the prescriptive (goals) and the operational (methods) kinds. The representation is intended to form a parsimonious, communicable and presentable knowledge-base that can be used as a tool for design research and education as well as for CAAD.
keywords	Design Methods, Design Process Goals, Knowledge Representation, Semantic Networks
series	eCAADe
email
last changed	2022/06/07 07:55

_id	6ef4
authors	Carrara, Gianfranco and Kalay, Yehuda E.
year	1992
title	Multi-Model Representation of Design Knowledge
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 77-88
doi	https://doi.org/10.52842/conf.acadia.1992.077
summary	Explicit representation of design knowledge is needed if scientific methods are to be applied in design research, and if comPuters are to be used in the aid of design education and practice. The representation of knowledge in general, and design knowledge in particular, have been the subject matter of computer science, design methods, and computer- aided design research for quite some time. Several models of design knowledge representation have been developed over the last 30 years, addressing specific aspects of the problem. This paper describes a different approach to design knowledge representation that recognizes the Multi-modal nature of design knowledge. It uses a variety of computational tools to encode different kinds of design knowledge, including the descriptive (objects), the prescriptive (goals) and the operational (methods) kinds. The representation is intended to form a parsimonious, communicable and presentable knowledge-base that can be used as a tool for design research and education as well as for CAAD.
keywords	Design Methods, Design Process, Goals, Knowledge Representation, Semantic Networks
series	ACADIA
email
last changed	2022/06/07 07:55

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
doi	https://doi.org/10.52842/conf.ecaade.2000.057
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	a2e6
authors	Liggett, R.S., Mitchell, W.J. and Tan, M.
year	1992
title	Multi-Level Analysis and Optimization of Design
source	New York: John Wiley & Sons, 1992. pp. 2512-269 : ill. includes bibliography
summary	This paper discusses a knowledge-based computer-aided design system, that provides multi-level analysis capabilities, and that automatically propagates constraints on design variables from level to level. It also Supports formulation and solution of optimization problems at different levels, so that a solution can be approached by solving a sequence of appropriately constrained sub-optimization problems. Theory and implementation are discussed, and a detailed case study of application to the design of small house plans is provided
keywords	constraints, design, methods, knowledge base, CAD, systems, analysis, optimization, automation, user interface, shape grammars
series	CADline
email
last changed	2003/06/02 14:41

_id	898a
authors	Bay, J.H.
year	2002
title	Cognitive Biases and Precedent Knowledge in Human and Computer-Aided Design Thinking
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 213-220
doi	https://doi.org/10.52842/conf.caadria.2002.213
summary	Cognitive biases (illusions) and potential errors can occur when using precedent knowledge for analogical, pre-parametric and qualitative design thinking. This paper refers largely to part of a completed research (Bay 2001) on how heuristic biases, discussed by Tversky and Kahneman (1982) in cognitive psychology, can affect judgement and learning of facts from precedents in architectural design, made explicit using a kernel of conceptual system (Tzonis et. al., 1978) and a framework of architectural representation (Tzonis 1992). These are used here to consider how such illusions and errors may be transferred to computer aided design thinking.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ddss9209
id	ddss9209
authors	De Gelder, J.T. and Lucardie, G.L.
year	1993
title	Knowledge and data modelling in cad/cam applications
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Modelling knowledge and data in CAD/CAM applications is complex because different goals and contexts have to be taken into account. This complexity makes particular demands upon representation formalisms. Today many modelling tools are based on record structures. By analyzing the requirements for a product model of a portal structure in steel, this paper shows that in many situations record structures are not well suited as a representation formalism for storing knowledge and data in CAD/CAM applications. This is illustrated by performing a knowledge-level analysis of the knowledge and data generated in the design and manufacturing process of a portal structure in steel.
series	DDSS
last changed	2003/08/07 16:36

_id	e51d
authors	Fazio, P., Bedard, C. and Gowri, K.
year	1992
title	Constraints for Generating Building Envelope Design Alternatives
source	New York: John Wiley & Sons, 1992. pp. 145-155 : charts. includes bibliography
summary	The building envelope design process involves selecting materials and constructional types for envelope components. Many different materials need to be combined together for wall and roof assemblies to meet the various performance requirements such as thermal efficiency, cost, acoustic and fire resistances. The number of performance attributes to be considered in the design process is large. Lack of information, time limitations and the large number of feasible design alternatives generally force the designer to rely on past experience and practical judgement to make rapid design decisions. Current work at the Centre for Buildings Studies focuses on the development of knowledge-based synthesis and evaluation techniques for reducing the problems of information handling and decision making in building envelope design. The generation of design alternatives is viewed as a search process that identifies feasible combinations of building envelope components satisfying a set of performance requirements, material compatibility, practicality of design, etc. This paper discusses knowledge acquisition and representation issues involved in the definition of constraints to guide the generation of feasible combinations of envelope components
keywords	envelope, knowledge base, knowledge acquisition, representation, performance, design, structures, architecture, evaluation
series	CADline
last changed	2003/06/02 14:41

_id	83f7
authors	Fenves, Stephen J., Flemming, Ulrich and Hendrickson, Craig (et al)
year	1992
title	Performance Evaluation in an Integrated Software Environment for Building Design and Construction Planning
source	New York: John Wiley & Sons, 1992. pp. 159-169 : ill. includes bibliography
summary	In this paper the authors describe the role of performance evaluation in the Integrated Software Environment for Building Design and Construction Planning (IBDE), which is a testbed for examining integration issues in the same domain. Various processes in IBDE deal with the spatial configuration, structural design, and construction planning of high-rise office buildings. Performance evaluations occur within these processes based on different representation schemes and control mechanisms for the handling of performance knowledge. Within this multiprocess environment, opportunities also exist for performance evaluation across disciplines through design critics
keywords	evaluation, performance, integration, systems, building, design, construction, architecture, planning, structures, representation, control
series	CADline
email
last changed	2003/06/02 10:24

_id	2c22
authors	O'Neill, Michael J.
year	1992
title	Neural Network Simulation as a Computer- Aided design Tool For Predicting Wayfinding Performance
source	New York: John Wiley & Sons, 1992. pp. 347-366 : ill. includes bibliography
summary	Complex public facilities such as libraries, hospitals, and governmental buildings often present problems to users who must find their way through them. Research shows that difficulty in wayfinding has costs in terms of time, money, public safety, and stress that results from being lost. While a wide range of architectural research supports the notion that ease of wayfinding should be a criterion for good design, architects have no method for evaluating how well their building designs will support the wayfinding task. People store and retrieve information about the layout of the built environment in a knowledge representation known as the cognitive map. People depend on the information stored in the cognitive map to find their way through buildings. Although there are numerous simulations of the cognitive map, the mechanisms of these models are not constrained by what is known about the neurophysiology of the brain. Rather, these models incorporate search mechanisms that act on semantically encoded information about the environment. In this paper the author describes the evaluation and application of an artificial neural network simulation of the cognitive map as a means of predicting wayfinding behavior in buildings. This simulation is called NAPS-PC (Network Activity Processing Simulator--PC version). This physiologically plausible model represents knowledge about the layout of the environment through a network of inter-connected processing elements. The performance of NAPS-PC was evaluated against actual human wayfinding performance. The study found that the simulation generated behavior that matched the performance of human participants. After the validation, NAPS-PC was modified so that it could read environmental information directly from AutoCAD (a popular micro-computer-based CAD software package) drawing files, and perform 'wayfinding' tasks based on that environmental information. This prototype tool, called AutoNet, is conceptualized as a means of allowing designers to predict the wayfinding performance of users in a building before it is actually built
keywords	simulation, cognition, neural networks, evaluation, floor plans, applications, wayfinding, layout, building
series	CADline
last changed	2003/06/02 13:58

_id	cb5a
authors	Oxman, Rivka E.
year	1992
title	Multiple Operative and Interactive Modes in Knowledge-Based Design Systems
source	New York: John Wiley & Sons, 1992. pp. 125-143 : ill. includes bibliography
summary	A conceptual basis for the development of an expert system which is capable of integrating various modes of generation and evaluation in design is presented. This approach is based upon two sets of reasoning processes in the design system. The first enables a mapping between design requirements and solution descriptions in a generative mode of design; and the second enables a mapping between solution descriptions and performance evaluation in an evaluative and predictive mode. This concept supports a formal framework necessary for a knowledge-based design system to operate in a design partnership relation with the designer. Another fundamental concept in expert systems for design, dual direction interpretation between graphic and textual modes, is presented and elaborated. This encoding of knowledge behind the geometrical representation can be achieved in knowledge- based design systems by the development of a 'semantic interpreter' which supports a dual direction mapping process employing a geometrical knowledge, typological knowledge and evaluative knowledge. An implemented expert system for design, PREDIKT, demonstrates these concepts in the domain of kitchen design. It provides the user with a choice of alternative modes of interaction, such as: a 'design critic' for the evaluation of a design, a 'design generator' for the generation of a design, or a 'design critic-generator' for the completion of partial solutions
keywords	architecture, knowledge base, design, systems, expert systems
series	CADline
email
last changed	2003/06/02 10:24

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	fd02
authors	Tsou, Jin-Yeu
year	1992
title	Using conceptual modelling and an object-oriented environment to support building cost control during early design
source	College of Architecture and Urban Planning, University of Michigan
summary	This research investigated formal information modelling techniques and the object-oriented knowledge representation on the domain of building cost control during early design stages. The findings contribute to an understanding of the advantages and disadvantages of applying formal modelling techniques to the analysis of architectural problems and the representation of domain knowledge in an object-oriented environment. In this study, information modelling techniques were reviewed, formal information analysis was performed, a conceptual model based on the cost control problem domain was created, a computational model based on the object-oriented approach was developed, a mechanism to support information broadcasting for representing interrelationships was implemented, and an object-oriented cost analysis system for early design (OBCIS) was demonstrated. The conceptual model, based on the elemental proposition analysis of NIAM, supports a formal approach for analyzing the problem domain; the analysis results are represented by high-level graphical notations, based on the AEC Building System Model, to visually display the information framework of the domain. The conceptual model provides an intermediate step between the system designer's view of the domain and the internal representation of the implementation platform. The object-oriented representation provides extensive data modelling abilities to help system designers intuitively represent the semantics of the problem domain. The object-oriented representation also supports more structured and integrated modules than conventional programming approaches. Although there are many advantages to applying this technique to represent the semantics of cost control knowledge, there are several issues which need to be considered: no single satisfactory classification method can be directly applied; object-oriented systems are difficult to learn; and designing reusable classes is difficult. The dependency graph and information broadcasting implemented in this research is an attempt to represent the interrelationships between domain objects. The mechanism allows users to explicitly define the interrelationships, based on semantic requirements, among domain objects. In the conventional approach, these relationships are directly interpreted by system designers and intertwined into the programming code. There are several issues which need to be studied further: indirect dependency relationship, conflict resolution, and request-update looping based on least-commitment approach.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	ddss9214
id	ddss9214
authors	Friedman, A.
year	1993
title	A decision-making process for choice of a flexible internal partition option in multi-unit housing using decision theory techniques
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Recent demographic changes have increased the heterogeneity of user groups in the North American housing market. Smaller households (e.g. elderly, single parent) have non-traditional spatial requirements that cannot be accommodated within the conventional house layout. This has created renewed interest in Demountable/Flexible internal partition systems. However, the process by which designers decide which project or user groups are most suited for the use of these systems is quite often complex, non-linear, uncertain and dynamic, since the decisions involve natural processes and human values that are apparently random. The anonymity of users when mass housing projects are conceptualized, and the uncertainty as to the alternative to be selected by the user, given his/her constantly changing needs, are some contributing factors to this effect. Decision Theory techniques, not commonly used by architects, can facilitate the decision-making process through a systematic evaluation of alternatives by means of quantitative methods in order to reduce uncertainty in probabilistic events or in cases when data is insufficient. The author used Decision Theory in the selection of flexible partition systems. The study involved a multi-unit, privately initiated housing project in Montreal, Canada, where real site conditions and costs were used. In this paper, the author outlines the fundamentals of Decision Theory and demonstrates the use of Expected Monetary Value and Weighted Objective Analysis methods and their outcomes in the design of a Montreal housing project. The study showed that Decision Theory can be used as an effective tool in housing design once the designer knows how to collect basic data.
series	DDSS
last changed	2003/08/07 16:36

_id	a081
authors	Greenberg S., Roseman M. and Webster, D.
year	1992
title	Issues and Experiences Designing and Implementing Two Group Drawing Tools
source	Readings in Groupware, 609-620
summary	Groupware designers are now developing multi-user equivalents of popular paint and draw applications. Their job is not an easy one. First, human factors issues peculiar to group interaction appear that, if ignored, seriously limit the usability of the group tool. Second, implementation is fraught with considerable hurdles. This paper describes the issues and experiences we have met and handled in the design of two systems supporting remote real time group interaction: GroupSketch, a multi-user sketchpad; and GroupDraw, an object-based multi-user draw package. On the human factors side, we summarize empirically-derived design principles that we believe are critical to building useful and usable collaborative drawing tools. On the implementation side, we describe our experiences with replicated versus centralized architectures, schemes for participant registration, multiple cursors, network requirements, and the structure of the drawing primitives.
series	other
last changed	2003/04/23 15:50

_id	ecaade2009_138
id	ecaade2009_138
authors	Kozikoglu, Nilüfer; Erdogan, Meral; Nircan, Ahmet Kutsi; Özsel Akipek, Fulya
year	2009
title	Collective Design Network: Systems Thinking (Event-Pattern-Structures) and System Dynamics Modelling as a Design Concept and Strategy
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 533-540
doi	https://doi.org/10.52842/conf.ecaade.2009.533
wos	WOS:000334282200064
summary	This paper will relay the initial phase of a collaborative work within partners from the design discipline, systems engineering, and software engineering which deals with the interrelations of “network idea”, “systems thinking”, “collective design”, and “computation”. Vensim– a system dynamics modelling tool developed by Ventana Systems, Inc. in 1992 – has been used in an experimental first year design studio to engage students in systems thinking in the architectural design environment. It has been observed that this tool enabled most students to develop a multi-layered, complex and more controlled design logic and to amplify the cognitive processes at the beginning of the design education. We conclude that in order to fully realize systems thinking in the design process, new ways of integrating parametric design environments and system dynamic modelling environments needs to be investigated.
keywords	Design network, system dynamics, dynamic pattern, collectivity, integration
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2024_365
id	caadria2024_365
authors	Lahtinen, Aaro, Gardner, Nicole, Ramos Jaime, Cristina and Yu, Kuai
year	2024
title	Visualising Sydney's Urban Green: A Web Interface for Monitoring Vegetation Coverage between 1992 and 2022 using Google Earth Engine
source	Nicole Gardner, Christiane M. Herr, Likai Wang, Hirano Toshiki, Sumbul Ahmad Khan (eds.), ACCELERATED DESIGN - Proceedings of the 29th CAADRIA Conference, Singapore, 20-26 April 2024, Volume 2, pp. 515–524
doi	https://doi.org/10.52842/conf.caadria.2024.2.515
summary	With continued population growth and urban expansion, the severity of environmental concerns within cities is likely to increase without proper urban ecosystem monitoring and management. Despite this, limited efforts have been made to effectively communicate the ecological value of urban vegetation to Architecture, Engineering and Construction (AEC) professionals concerned with mitigating these effects and improving urban liveability. In response, this research project proposes a novel framework for identifying and conveying historical changes to vegetation coverage within the Greater Sydney area between 1992 and 2022. The cloud-based geo-spatial analysis platform, Google Earth Engine (GEE), was used to construct an accurate land cover classification of Landsat imagery, allowing the magnitude, spatial configuration, and period of vegetation loss to be promptly identified. The outcomes of this analysis are represented through an intuitive web platform that facilitates a thorough understanding of the complex relationships between anthropogenic activities and vegetation coverage. A key finding indicated that recent developments in the Blacktown area had directly contributed to heightened land surface temperature, suggesting a reformed approach to urban planning is required to address climatic concerns appropriately. The developed web interface provides a unique method for AEC professionals to assess the effectiveness of past planning strategies, encouraging a multi-disciplinary approach to urban ecosystem management.
keywords	Urban Vegetation, Web Interface, Landsat Imagery, Land Cover Classification, Google Earth Engine
series	CAADRIA
email
last changed	2024/11/17 22:05

_id	caadria2014_071
id	caadria2014_071
authors	Li, Lezhi; Renyuan Hu, Meng Yao, Guangwei Huang and Ziyu Tong
year	2014
title	Sculpting the Space: A Circulation Based Approach to Generative Design in a Multi-Agent System
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 565–574
doi	https://doi.org/10.52842/conf.caadria.2014.565
summary	This paper discusses an MAS (multiagent system) based approach to generating architectural spaces that afford better modes of human movement. To achieve this, a pedestrian simulation is carried out to record the data with regard to human spatial experience during the walking process. Unlike common practices of performance oriented generation where final results are achieved through cycles of simulation and comparison, what we propose here is to let human’s movement exert direct influence on space. We made this possible by asking "humans" to project simulation data on architectural surroundings, and thus cause the layout to change for the purpose of affording what we designate as good spatial experiences. A generation experiment of an exhibition space is implemented to explore this approach, in which tentative rules of such spatial manipulation are proposed and tested through space syntax analyse. As the results suggested, by looking at spatial layouts through a lens of human behaviour, this projection-and-generation method provides some insight into space qualities that other methods could not have offered.
keywords	Performance oriented generative design; projection; multi-agent system; pedestrian simulation; space syntax
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ddss9215
id	ddss9215
authors	Mortola, E. and Giangrande, A.
year	1993
title	A trichotomic segmentation procedure to evaluate projects in architecture
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper illustrates a model used to construct the evaluation module for An Interface for Designing (AID), a system to aid architectural design. The model can be used at the end of every cycle of analysis-synthesis-evaluation in the intermediate phases of design development. With the aid of the model it is possible to evaluate the quality of a project in overall terms to establish whether the project is acceptable, whether it should be elaborated ex-novo, or whether it is necessary to begin a new cycle to improve it. In this last case, it is also possible to evaluate the effectiveness of the possible actions and strategies for improvement. The model is based on a procedure of trichotomic segmentation, developed with MCDA (Multi-Criteria Decision Aid), which uses the outranking relation to compare the project with some evaluation profiles taken as projects of reference. An application of the model in the teaching field will also be described.
series	DDSS
last changed	2003/08/07 16:36

_id	1850
authors	Palmqvist, Henri
year	1992
title	SAD - SIMULATOR AIDED DESIGN
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part B, pp. 39-42
summary	The multi-level, multidimensional nature of architecture means that the only way to experience it and evaluate it is by moving within the buildings and the environment they constitute. Until today, architectural projects could only be observed after they had been finished. The recently developed environmental simulator is the solution to the problem. With the simulator and scale models we can observe the experience of moving around within the buildings and thus make a significant improvement in the certainty of the assumed architectural experience and content while the project is still under design.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:40

For more results click below: