Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 188

Reformat results as: short short into frame detailed detailed into frame

_id	d919
authors	Heckbert, P.S.
year	1992
title	Discontinuity Meshing for Radiosity
source	Eurographics Workshop on Rendering. May 1992, pp. 203-216
summary	The radiosity method is the most popular algorithm for simulating interreflection of light between diffuse surfaces. Most existing radiosity algorithms employ simple meshes and piecewise constant approximations, thereby constraining the radiosity function to be constant across each polygonal element. Much more accurate simulations are possible if linear, quadratic, or higher degree approximations are used. In order to realize the potential accuracy of higher-degree approximations, however, it is necessary for the radiosity mesh to resolve discontinuities such as shadow edges in the radiosity function. A discontinuity meshing algorithm is presented that places mesh boundaries directly along discontinuities. Such algorithms offer the potential of faster, more accurate simulations. Results are shown for three-dimensional scenes.
series	other
last changed	2003/04/23 15:14

_id	9feb
authors	Turk, G.
year	1992
title	Re-tiling polygonal surfaces
source	E.E. Catmull, (ed) Computer Graphics (Siggraph ¥92 proc.), vol 26, pp. 55-64, July 1992
summary	This paper presents an automatic method of creating surface models at several levels of detail from an original polygonal description of a given object. Representing models at various levels of detail is important for achieving high frame rates in interactive graphics applications and also for speeding-up the off-line rendering of complex scenes. Unfortunately, generating these levels of detail is a time-consuming task usually left to a human modeler. This paper shows how a new set of vertices can be distributed over the surface of a model and connected to one another to create a re-tiling of a surface that is faithful to both the geometry and the topology of the original surface. The main contributions of this paper are: 1) a robust method of connecting together new vertices over a surface, 2) a way of using an estimate of surface curvature to distribute more new vertices at regions of higher curvature and 3) a method of smoothly interpolating between models that represent the same object at different levels of detail. The key notion in the re-tiling procedure is the creation of an intermediate model called the mutual tessellation of a surface that contains both the vertices from the original model and the new points that are to become vertices in the re-tiled surface. The new model is then created by removing each original vertex and locally re-triangulating the surface in a way that matches the local connectedness of the initial surface. This technique for surface retessellation has been successfully applied to iso-surface models derived from volume data, Connolly surface molecular models and a tessellation of a minimal surface of interest to mathematicians.
series	other
last changed	2003/04/23 15:50

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2000.057
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	ddss9214
id	ddss9214
authors	Friedman, A.
year	1993
title	A decision-making process for choice of a flexible internal partition option in multi-unit housing using decision theory techniques
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Recent demographic changes have increased the heterogeneity of user groups in the North American housing market. Smaller households (e.g. elderly, single parent) have non-traditional spatial requirements that cannot be accommodated within the conventional house layout. This has created renewed interest in Demountable/Flexible internal partition systems. However, the process by which designers decide which project or user groups are most suited for the use of these systems is quite often complex, non-linear, uncertain and dynamic, since the decisions involve natural processes and human values that are apparently random. The anonymity of users when mass housing projects are conceptualized, and the uncertainty as to the alternative to be selected by the user, given his/her constantly changing needs, are some contributing factors to this effect. Decision Theory techniques, not commonly used by architects, can facilitate the decision-making process through a systematic evaluation of alternatives by means of quantitative methods in order to reduce uncertainty in probabilistic events or in cases when data is insufficient. The author used Decision Theory in the selection of flexible partition systems. The study involved a multi-unit, privately initiated housing project in Montreal, Canada, where real site conditions and costs were used. In this paper, the author outlines the fundamentals of Decision Theory and demonstrates the use of Expected Monetary Value and Weighted Objective Analysis methods and their outcomes in the design of a Montreal housing project. The study showed that Decision Theory can be used as an effective tool in housing design once the designer knows how to collect basic data.
series	DDSS
last changed	2003/08/07 16:36

_id	caadria2024_365
id	caadria2024_365
authors	Lahtinen, Aaro, Gardner, Nicole, Ramos Jaime, Cristina and Yu, Kuai
year	2024
title	Visualising Sydney's Urban Green: A Web Interface for Monitoring Vegetation Coverage between 1992 and 2022 using Google Earth Engine
doi	https://doi.org/10.52842/conf.caadria.2024.2.515
source	Nicole Gardner, Christiane M. Herr, Likai Wang, Hirano Toshiki, Sumbul Ahmad Khan (eds.), ACCELERATED DESIGN - Proceedings of the 29th CAADRIA Conference, Singapore, 20-26 April 2024, Volume 2, pp. 515–524
summary	With continued population growth and urban expansion, the severity of environmental concerns within cities is likely to increase without proper urban ecosystem monitoring and management. Despite this, limited efforts have been made to effectively communicate the ecological value of urban vegetation to Architecture, Engineering and Construction (AEC) professionals concerned with mitigating these effects and improving urban liveability. In response, this research project proposes a novel framework for identifying and conveying historical changes to vegetation coverage within the Greater Sydney area between 1992 and 2022. The cloud-based geo-spatial analysis platform, Google Earth Engine (GEE), was used to construct an accurate land cover classification of Landsat imagery, allowing the magnitude, spatial configuration, and period of vegetation loss to be promptly identified. The outcomes of this analysis are represented through an intuitive web platform that facilitates a thorough understanding of the complex relationships between anthropogenic activities and vegetation coverage. A key finding indicated that recent developments in the Blacktown area had directly contributed to heightened land surface temperature, suggesting a reformed approach to urban planning is required to address climatic concerns appropriately. The developed web interface provides a unique method for AEC professionals to assess the effectiveness of past planning strategies, encouraging a multi-disciplinary approach to urban ecosystem management.
keywords	Urban Vegetation, Web Interface, Landsat Imagery, Land Cover Classification, Google Earth Engine
series	CAADRIA
email
last changed	2024/11/17 22:05

_id	6225
authors	Ozcan, Oguzhan
year	1992
title	Specification of a Hypermedia System for the Topkapi Palace
doi	https://doi.org/10.52842/conf.ecaade.1992.119
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 119-132
summary	This paper summaries a doctoral investigation being carried out in the ABACUS group of the University of Strathclyde into the relevance of advanced multi-media technology to the explanation and investigation of the complex development of architecture which has historical and/or cultural significance.
series	eCAADe
last changed	2022/06/07 08:00

_id	a5fc
authors	Shinners, Neil, D’Cruz, Neville and Marriott, Andrew
year	1992
title	Multi-Faceted Architectural Visualization
doi	https://doi.org/10.52842/conf.acadia.1992.141
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 141-153
summary	As well as learning traditional design techniques, students in architecture courses learn how to use powerful workstations with CAD systems, color scanners and laser printers and software for the rendering, compositing and animating of their designs. They learn to use raytracing and radiosity rendering systems to provide visual realism, alpha-channel compositing systems to put a client in the picture (literally) or the design in situ, and keyframe animation systems to allow realistic walkthroughs. Student Presentations are now based on videos, photographic slides, slide shows or real time animation. Images (as data files) are imported into full color publishing systems for final year thesis presentation. The architectural graphics environment at Curtin University facilitates the integration of slide and video examples of raytraced and chroma-keyed images with computer aided design techniques for architectural student presentations.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	a582
authors	Marshall, Tony B.
year	1992
title	The Computer as a Graphic Medium in Conceptual Design
doi	https://doi.org/10.52842/conf.acadia.1992.039
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 39-47
summary	The success CAD has experienced in the architectural profession demonstrates that architects have been willing to replace traditional drafting media with computers and electronic plotters for the production of working drawings. Its expanded use in the design development phase for 3D modeling and rendering further justifies CAD's usefulness as a presentation medium. The schematic design phase however, has hardly been influenced by the evolution of CAD. Most architects simply have not come to view the computer as a viable design medium. One reason for this might be the strong correspondence between architectural CAD and plan view graphics, as used in working drawings, compared to the weak correspondence between architectural CAD and plan view graphics, as used in schematic design. The role of the actual graphic medium during schematic design should not be overlooked in the development of CAD applications. In order to produce practical CAD applications for schematic design we must explore the computer’s potential as a form of expression and its role as a graphic medium. An examination of the use of traditional graphic media during schematic design will provide some clues regarding what capabilities CAD must provide and how a system should operate in order to be useful during conceptual design.
series	ACADIA
last changed	2022/06/07 07:59

_id	0ad8
authors	Candy, E., Maver, T.W. and Petric, J.
year	1992
title	A Multi-Media Celebration of Robert Adam's Glasgow Architecture
doi	https://doi.org/10.52842/conf.ecaade.1992.043
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 43-54
summary	This paper is a summary of work done in preparation for an exhibition titled "A European Vision: Robert Adam's Glasgow" which marks the bi-centenary of Robert Adam's death. The main contributors to this project, orchestrated over academic sessions 91/92, were the undergraduate and post-graduate students from the Department of Architecture, University of Strathclyde, Glasgow.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2312
authors	Carrara, G., Kalay Y.E. and Novembri, G.
year	1992
title	Multi-modal Representation of Design Knowledge
doi	https://doi.org/10.52842/conf.ecaade.1992.055
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 55-66
summary	Explicit representation of design knowledge is needed if scientific methods are to be applied in design research, and if computers are to be used in the aid of design education and practice. The representation of knowledge in general, and design knowledge in particular, have been the subject matter of computer science, design methods, and computer-aided design research for quite some time. Several models of design knowledge representation have been developed over the last 30 years, addressing specific aspects of the problem. This paper describes a different approach to design knowledge representation that recognizes the multimodal nature of design knowledge. It uses a variety of computational tools to encode different kinds of design knowledge, including the descriptive (objects), the prescriptive (goals) and the operational (methods) kinds. The representation is intended to form a parsimonious, communicable and presentable knowledge-base that can be used as a tool for design research and education as well as for CAAD.
keywords	Design Methods, Design Process Goals, Knowledge Representation, Semantic Networks
series	eCAADe
email
last changed	2022/06/07 07:55

_id	6ef4
authors	Carrara, Gianfranco and Kalay, Yehuda E.
year	1992
title	Multi-Model Representation of Design Knowledge
doi	https://doi.org/10.52842/conf.acadia.1992.077
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 77-88
summary	Explicit representation of design knowledge is needed if scientific methods are to be applied in design research, and if comPuters are to be used in the aid of design education and practice. The representation of knowledge in general, and design knowledge in particular, have been the subject matter of computer science, design methods, and computer- aided design research for quite some time. Several models of design knowledge representation have been developed over the last 30 years, addressing specific aspects of the problem. This paper describes a different approach to design knowledge representation that recognizes the Multi-modal nature of design knowledge. It uses a variety of computational tools to encode different kinds of design knowledge, including the descriptive (objects), the prescriptive (goals) and the operational (methods) kinds. The representation is intended to form a parsimonious, communicable and presentable knowledge-base that can be used as a tool for design research and education as well as for CAAD.
keywords	Design Methods, Design Process, Goals, Knowledge Representation, Semantic Networks
series	ACADIA
email
last changed	2022/06/07 07:55

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	a081
authors	Greenberg S., Roseman M. and Webster, D.
year	1992
title	Issues and Experiences Designing and Implementing Two Group Drawing Tools
source	Readings in Groupware, 609-620
summary	Groupware designers are now developing multi-user equivalents of popular paint and draw applications. Their job is not an easy one. First, human factors issues peculiar to group interaction appear that, if ignored, seriously limit the usability of the group tool. Second, implementation is fraught with considerable hurdles. This paper describes the issues and experiences we have met and handled in the design of two systems supporting remote real time group interaction: GroupSketch, a multi-user sketchpad; and GroupDraw, an object-based multi-user draw package. On the human factors side, we summarize empirically-derived design principles that we believe are critical to building useful and usable collaborative drawing tools. On the implementation side, we describe our experiences with replicated versus centralized architectures, schemes for participant registration, multiple cursors, network requirements, and the structure of the drawing primitives.
series	other
last changed	2003/04/23 15:50

_id	ecaade2009_138
id	ecaade2009_138
authors	Kozikoglu, Nilüfer; Erdogan, Meral; Nircan, Ahmet Kutsi; Özsel Akipek, Fulya
year	2009
title	Collective Design Network: Systems Thinking (Event-Pattern-Structures) and System Dynamics Modelling as a Design Concept and Strategy
doi	https://doi.org/10.52842/conf.ecaade.2009.533
source	Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings / ISBN 978-0-9541183-8-9] Istanbul (Turkey) 16-19 September 2009, pp. 533-540
summary	This paper will relay the initial phase of a collaborative work within partners from the design discipline, systems engineering, and software engineering which deals with the interrelations of “network idea”, “systems thinking”, “collective design”, and “computation”. Vensim– a system dynamics modelling tool developed by Ventana Systems, Inc. in 1992 – has been used in an experimental first year design studio to engage students in systems thinking in the architectural design environment. It has been observed that this tool enabled most students to develop a multi-layered, complex and more controlled design logic and to amplify the cognitive processes at the beginning of the design education. We conclude that in order to fully realize systems thinking in the design process, new ways of integrating parametric design environments and system dynamic modelling environments needs to be investigated.
wos	WOS:000334282200064
keywords	Design network, system dynamics, dynamic pattern, collectivity, integration
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2014_071
id	caadria2014_071
authors	Li, Lezhi; Renyuan Hu, Meng Yao, Guangwei Huang and Ziyu Tong
year	2014
title	Sculpting the Space: A Circulation Based Approach to Generative Design in a Multi-Agent System
doi	https://doi.org/10.52842/conf.caadria.2014.565
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 565–574
summary	This paper discusses an MAS (multiagent system) based approach to generating architectural spaces that afford better modes of human movement. To achieve this, a pedestrian simulation is carried out to record the data with regard to human spatial experience during the walking process. Unlike common practices of performance oriented generation where final results are achieved through cycles of simulation and comparison, what we propose here is to let human’s movement exert direct influence on space. We made this possible by asking "humans" to project simulation data on architectural surroundings, and thus cause the layout to change for the purpose of affording what we designate as good spatial experiences. A generation experiment of an exhibition space is implemented to explore this approach, in which tentative rules of such spatial manipulation are proposed and tested through space syntax analyse. As the results suggested, by looking at spatial layouts through a lens of human behaviour, this projection-and-generation method provides some insight into space qualities that other methods could not have offered.
keywords	Performance oriented generative design; projection; multi-agent system; pedestrian simulation; space syntax
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ddss9215
id	ddss9215
authors	Mortola, E. and Giangrande, A.
year	1993
title	A trichotomic segmentation procedure to evaluate projects in architecture
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper illustrates a model used to construct the evaluation module for An Interface for Designing (AID), a system to aid architectural design. The model can be used at the end of every cycle of analysis-synthesis-evaluation in the intermediate phases of design development. With the aid of the model it is possible to evaluate the quality of a project in overall terms to establish whether the project is acceptable, whether it should be elaborated ex-novo, or whether it is necessary to begin a new cycle to improve it. In this last case, it is also possible to evaluate the effectiveness of the possible actions and strategies for improvement. The model is based on a procedure of trichotomic segmentation, developed with MCDA (Multi-Criteria Decision Aid), which uses the outranking relation to compare the project with some evaluation profiles taken as projects of reference. An application of the model in the teaching field will also be described.
series	DDSS
last changed	2003/08/07 16:36

_id	25b7
authors	Smeltzer, G., Roelen, W. and Maver, T.W.
year	1992
title	Design Modelling and Design Presentation From a Computer-Generated Image Towards a Multi-user Design System
doi	https://doi.org/10.52842/conf.ecaade.1992.137
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 137-144
summary	CAD systems regularly offer new techniques for the presentation of design proposals like computer-generated (stereo-) images, animations, holography and virtual reality. These techniques are mainly used for the presentation of a final design or for the presentation of buildings that have already been constructed. As in the course of time the quality of the CAD systems and their users have improved enormously, it is also possible to use these systems for the evaluation of several temporary design proposals during the design process. Since 'beautiful pictures' and 'wonderful animations' have already shown their great value when presenting a design, it is sometimes as if CAD systems are considered suitable for this propose only. Even new techniques like virtual reality systems seem to be valued only through the 'tinted glasses' of the presentation capabilities. Hardly any attention is paid to the possibilities that these new techniques offer as an instrument to support modelling and evaluation during the design process. This article will outline the results of research and development in the field of virtual reality. Virtual reality systems are based on the combination of a number of already existing presentation techniques like photo-realistic images, stereo images and real time animations. The added value of this type of CAD system is determined by the use of a new type of user interface. In effect this interface consists of sensors that register how its user moves and looks around. Through this, and by using a so- called 'eye phone' (comparable to stereo headphones for sound) the user, with some imaginative powers, thinks he is standing in the environment that he modelled, or in front of his building design. After this we will first sketch the outlines of some presentation techniques, that can also be found in a virtual reality system. Special attention will be paid to some specific characteristics of these techniques themselves. Next, a more detailed description will be given of virtual reality systems, focusing on the system that is being developed at Calibre itself.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cf5c
authors	Carpenter, B.
year	1992
title	The logic of typed feature structures with applications to unificationgrammars, logic programs and constraint resolution
source	Cambridge Tracts in Theoretical Computer Science, Cambridge University Press
summary	This book develops the theory of typed feature structures, a new form of data structure that generalizes both the first-order terms of logic programs and feature-structures of unification-based grammars to include inheritance, typing, inequality, cycles and intensionality. It presents a synthesis of many existing ideas into a uniform framework, which serves as a logical foundation for grammars, logic programming and constraint-based reasoning systems. Throughout the text, a logical perspective is adopted that employs an attribute-value description language along with complete equational axiomatizations of the various systems of feature structures. Efficiency concerns are discussed and complexity and representability results are provided. The application of feature structures to phrase structure grammars is described and completeness results are shown for standard evaluation strategies. Definite clause logic programs are treated as a special case of phrase structure grammars. Constraint systems are introduced and an enumeration technique is given for solving arbitrary attribute-value logic constraints. This book with its innovative approach to data structures will be essential reading for researchers in computational linguistics, logic programming and knowledge representation. Its self-contained presentation makes it flexible enough to serve as both a research tool and a textbook.
series	other
last changed	2003/04/23 15:14

_id	7905
authors	Deering, Michael
year	1992
title	High Resolution Virtual Reality
source	Proceedingsfrom SIGGRAPH 1992, (Chicago, Illinois, July 1992). 195-202
summary	I define the lower layers of Virtual Reality to be: the highly-accurate, real-time simulation by computer of the interaction of the physical world with human senses. My focus is on the visual system, the talk will desceribe the techniques used to perform this simulation in several running systems at Sun microsystems. These include: correct perspective viewing equations, correcting for the optics of both human includes details of the Virtual Portal, a 1K x 2K walk-in virtual display device.
series	other
last changed	2003/04/23 15:14

_id	32eb
authors	Henry, Daniel
year	1992
title	Spatial Perception in Virtual Environments : Evaluating an Architectural Application
source	University of Washington
summary	Over the last several years, professionals from many different fields have come to the Human Interface Technology Laboratory (H.I.T.L) to discover and learn about virtual environments. In general, they are impressed by their experiences and express the tremendous potential the tool has in their respective fields. But the potentials are always projected far in the future, and the tool remains just a concept. This is justifiable because the quality of the visual experience is so much less than what people are used to seeing; high definition television, breathtaking special cinematographic effects and photorealistic computer renderings. Instead, the models in virtual environments are very simple looking; they are made of small spaces, filled with simple or abstract looking objects of little color distinctions as seen through displays of noticeably low resolution and at an update rate which leaves much to be desired. Clearly, for most applications, the requirements of precision have not been met yet with virtual interfaces as they exist today. However, there are a few domains where the relatively low level of the technology could be perfectly appropriate. In general, these are applications which require that the information be presented in symbolic or representational form. Having studied architecture, I knew that there are moments during the early part of the design process when conceptual decisions are made which require precisely the simple and representative nature available in existing virtual environments. This was a marvelous discovery for me because I had found a viable use for virtual environments which could be immediately beneficial to architecture, my shared area of interest. It would be further beneficial to architecture in that the virtual interface equipment I would be evaluating at the H.I.T.L. happens to be relatively less expensive and more practical than other configurations such as the "Walkthrough" at the University of North Carolina. The set-up at the H.I.T.L. could be easily introduced into architectural firms because it takes up very little physical room (150 square feet) and it does not require expensive and space taking hardware devices (such as the treadmill device for simulating walking). Now that the potential for using virtual environments in this architectural application is clear, it becomes important to verify that this tool succeeds in accurately representing space as intended. The purpose of this study is to verify that the perception of spaces is the same, in both simulated and real environment. It is hoped that the findings of this study will guide and accelerate the process by which the technology makes its way into the field of architecture.
keywords	Space Perception; Space (Architecture); Computer Simulation
series	thesis:MSc
last changed	2003/02/12 22:37

For more results click below: