Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 247

Reformat results as: short short into frame detailed detailed into frame

_id	b2f9
id	b2f9
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	INTELLIGENT KNOWLEDGE-BASED REPOSITORY TO SUPPORT INFORMED DESIGN DECISION MAKING
source	ITCON journal
summary	Research highlights that architectural design is a social phenomenon that is underpinned by critical analysis of design precedents and the social interaction between designers including negotiation, collaboration and communication. CAAD systems are continuously developing as essential design tools in formulating and developing ideas. Researchers such as (Rosenman, Gero and Oxman 1992) have suggested suggest that knowledge based systems can be integrated with CAAD systems to provide design knowledge that would enable recalling design precedents that maybe linked to the design constraints. Currently CAAD systems are user centric being focused on architects rather than the end product. The systems provide limited assistance in the production of innovative design. Furthermore, the attention of the designers of knowledge based systems is providing a repository rather than a system that is capable to initiate innovation. Most of the CAAD systems have web communication tools that enable designers to communicate their design ideas with colleagues and partners in business. However, none of these systems have the capability to capture useful knowledge from the design negotiations. Students of the third to fifth year at College of Architecture, University of Dammam were surveyed and interviewed to find out how far design tools, communications and resources would impact the production of innovative design projects. The survey results show that knowledge extracted from design negotiations would impact the innovative design outcome. It highlights also that present design precedents are not very helpful and design negotiations between students, tutors and other students are not documented thus fully incorporated into the design scheme. The paper argues that the future CAAD systems should be capable to recognize innovative design precedents, and incorporate knowledge that is resulted from design negotiations. This would help students to gain a critical mass of knowledge that would underpin informed design decisions.
series	journal paper
type	normal paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_20
last changed	2012/09/19 13:41

_id	eda3
authors	Goldschmidt, Gabriela
year	1992
title	Criteria for Design Evaluation : A Process-Oriented Paradigm
source	New York: John Wiley & Sons, 1992. pp. 67-79. includes bibliography
summary	Architectural research of the last two or three decades has been largely devoted to design methodology. Systematic evaluations of design products and prescription of their desired qualities led to specifications for better designs and possible routines to achieve them. Computers have facilitated this task. The human designer, however, has largely resisted the use of innovative methods. In this paper the author claims that the reason for that lies in insufficient regard for innate cognitive aptitudes which are activated in the process of designing. A view of these aptitudes, based on patterns of links among design moves, is presented. It is proposed that process research is mandatory for further advancements in design research utility
keywords	cognition, design process, research, protocol analysis, architecture
series	CADline
last changed	1999/02/12 15:08

_id	3ff5
authors	Abbo, I.A., La Scalea, L., Otero, E. and Castaneda, L.
year	1992
title	Full-Scale Simulations as Tool for Developing Spatial Design Ability
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part C, pp. 7-10
summary	Spatial Design Ability has been defined as the capability to anticipate effects (psychological impressions on potential observers or users) produced by mental manipulation of elements of architectural or urban spaces. This ability, of great importance in choosing the appropriate option during the design process, is not specifically developed in schools of architecture and is partially obtained as a by-product of drawing, designing or architectural criticism. We use our Laboratory as a tool to present spaces to people so that they can evaluate them. By means of a series of exercises, students confront their anticipations with the psychological impressions produced in other people. For this occasion, we present an experience in which students had to propose a space for an exhibition hag in which architectural projects (student thesis) were to be shown. Following the Spatial Design Ability Development Model which we have been using for several years, students first get acquainted with the use of evaluation instruments for psychological impressions as well as with research methodology. In this case, due to the short period available, we reduced research to investigate the effects produced by the manipulation of only 2 independents variables: students manipulated first the form of the roof, walls and interiors elements, secondly, color and texture of those elements. They evaluated spatial quality, character and the other psychological impressions that manipulations produced in people. They used three dimensional scale models 1/10 and 1/1.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
email
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	735a
authors	Anh, Tran Hoai
year	1992
title	FULL-SCALE EXPERIMENT ON KITCHEN FUNCTION IN HANOI
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part A, pp. 19-30
summary	This study is a part of a licentiate thesis on "Functional kitchen for the Vietnamese cooking way"at the Department of Architecture and Development studies, Lund University. The issues it is dealing with are: (1) Inadequacy of kitchen design in the apartment buildings in Hanoi, where the kitchen is often designed as a mere cooking place - other parts of the food making process are not given any attention. (2) Lack of standard dimensional and planning criteria for functional kitchen which can serve as bases for kitchen design. // The thesis aims at finding out indicators on functional spatial requirements for kitchen, which can serve as guide-line for designing functional kitchen for Hanoi. One of the main propositions in the thesis is that functional kitchens for Hanoi should be organised to permit the culinary activities done according to the Vietnamese urban culinary practice. This is based on the concept that the culinary activity is an expression Of culture, thus the practice of preparing meal in the present context of the urban households in Hanoi has an established pattern, method which demand a suitable area and arrangement in the kitchen. This pattern and cooking method should make up the functional requirement for kitchen in Hanoi, and be taken in to account if functional kitchen designing is to be achieved. In the context of the space-limited apartment building of Hanoi, special focus is given to find out indicators on the minimum functional spatial requirements of the kitchen works.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:29

_id	6270
authors	Atac, Ibrahim
year	1992
title	CAAD Education and Post-Graduate Opportunities (At Mimar Sinan University)
doi	https://doi.org/10.52842/conf.ecaade.1992.273
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 273-278
summary	This paper addresses new design teaching strategies at an important and traditional university in Istanbul, founded as the Academy of Fine Arts 110 years ago. It will include a short review of design education before the Academy changed into a university, and a description of the present situation with regard to computers. Nearly two years ago, CAAD education was introduced as an elective subject. The students show great interest in CAD; most Turkish architects now work with computers and CAAD graphics, although automated architecture has not yet become firmly established. The aim of the CAD studio is also to establish an institute which will allow university staff to develop their own programs and to pursue scientific research in this field. On the basis of rising requests from researchers and students, rapid and healthy developments should be made to keep up with new technologies. As the improvement of the specialized involvement with CAD is the future target, MSU is attempting to broaden its horizon by including design methodologies of the last decades.
series	eCAADe
last changed	2022/06/07 07:54

_id	60e7
authors	Bailey, Rohan
year	2000
title	The Intelligent Sketch: Developing a Conceptual Model for a Digital Design Assistant
doi	https://doi.org/10.52842/conf.acadia.2000.137
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 137-145
summary	The computer is a relatively new tool in the practice of Architecture. Since its introduction, there has been a desire amongst designers to use this new tool quite early in the design process. However, contrary to this desire, most Architects today use pen and paper in the very early stages of design to sketch. Architects solve problems by thinking visually. One of the most important tools that the Architect has at his disposal in the design process is the hand sketch. This iterative way of testing ideas and informing the design process with images fundamentally directs and aids the architect’s decision making. It has been said (Schön and Wiggins 1992) that sketching is about the reflective conversation designers have with images and ideas conveyed by the act of drawing. It is highly dependent on feedback. This “conversation” is an area worthy of investigation. Understanding this “conversation” is significant to understanding how we might apply the computer to enhance the designer’s ability to capture, manipulate and reflect on ideas during conceptual design. This paper discusses sketching and its relation to design thinking. It explores the conversations that designers engage in with the media they use. This is done through the explanation of a protocol analysis method. Protocol analysis used in the field of psychology, has been used extensively by Eastman et al (starting in the early 70s) as a method to elicit information about design thinking. In the pilot experiment described in this paper, two persons are used. One plays the role of the “hand” while the other is the “mind”- the two elements that are involved in the design “conversation”. This variation on classical protocol analysis sets out to discover how “intelligent” the hand should be to enhance design by reflection. The paper describes the procedures entailed in the pilot experiment and the resulting data. The paper then concludes by discussing future intentions for research and the far reaching possibilities for use of the computer in architectural studio teaching (as teaching aids) as well as a digital design assistant in conceptual design.
keywords	CAAD, Sketching, Protocol Analysis, Design Thinking, Design Education
series	ACADIA
last changed	2022/06/07 07:54

_id	a6d8
authors	Baletic, Bojan
year	1992
title	Information Codes of Mutant Forms
doi	https://doi.org/10.52842/conf.ecaade.1992.173
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 173-186
summary	If we assume that the statements from this quote are true, than we have to ask ourselves the question: "Should we teach architecture as we do?" This paper describes our experience in developing a knowledge base using a neural network system to serve as a "intelligent assistant" to students and other practicing architects in the conceptual phase of their work on housing design. Our approach concentrated on rising the awareness of the designer about the problem, not by building rules to guide him to a solution, but by questioning the categories and typologies by which he classifies and understands a problem. This we achieve through examples containing mutant forms, imperfect rules, gray zones between black and white, that carry the seeds of new solutions.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	898a
authors	Bay, J.H.
year	2002
title	Cognitive Biases and Precedent Knowledge in Human and Computer-Aided Design Thinking
doi	https://doi.org/10.52842/conf.caadria.2002.213
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 213-220
summary	Cognitive biases (illusions) and potential errors can occur when using precedent knowledge for analogical, pre-parametric and qualitative design thinking. This paper refers largely to part of a completed research (Bay 2001) on how heuristic biases, discussed by Tversky and Kahneman (1982) in cognitive psychology, can affect judgement and learning of facts from precedents in architectural design, made explicit using a kernel of conceptual system (Tzonis et. al., 1978) and a framework of architectural representation (Tzonis 1992). These are used here to consider how such illusions and errors may be transferred to computer aided design thinking.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	aa78
authors	Bayazit, Nigan
year	1992
title	Requirements of an Expert System for Design Studios
doi	https://doi.org/10.52842/conf.ecaade.1992.187
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 187-194
summary	The goal of this paper is to study problems of the transition from traditional architectural studio teaching to CAAD studio teaching which requires a CAAD expert system as studio tutor, and to study the behavior of the student in this new environment. The differences between the traditional and computerized studio teaching and the experiences in this field are explained referring to the requirements for designing time in relation to the expertise of the student in the application of a CAD program. Learning styles and the process of design in computerized and non-computerized studio teaching are discussed. Design studio requirements of the students in traditional studio environment while doing design works are clarified depending on the results of an empirical study which explained the relations between the tutor and the student while they were doing studio critiques. Main complaints of the students raised in the empirical study were the lack of data in the specific design problem area, difficulties of realization of ideas and thoughts, not knowing the starting point of design, having no information about the references to be used for the specific design task, having difficulties in the application of presentation techniques. In the concluding parts of the paper are discussed the different styles of teaching and their relation to the CAAD environment, the transformation of the instructional programs for the new design environment, the future expectations from the CAAD programs, properties of the new teaching environment and the roles of the expert systems in design studio education.
keywords	CAAD Education, Expert System, Architectural Design Studio, Knowledge Acquisition
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	065b
authors	Beitia, S.S., Zulueta, A. and Barrallo, J.
year	1995
title	The Virtual Cathedral - An Essay about CAAD, History and Structure
doi	https://doi.org/10.52842/conf.ecaade.1995.355
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 355-360
summary	The Old Cathedral of Santa Maria in Vitoria is the most representative building of the Gothic style in the Basque Country. Built during the XIV century, it has been closed to the cult in 1994 because of the high risk of collapse that presents its structure. This closure was originated by the structural analysis that was entrusted to the University of the Basque Country in 1992. The topographic works developed in the Cathedral to elaborate the planimetry of the temple revealed that many structural elements of great importance like arches, buttresses and flying buttresses were removed, modified or added along the history of Santa Maria. The first structural analysis made in the church suggested that the huge deformations showed in the resistant elements, specially the piers, were originated by interventions made in the past. A deep historical investigation allowed us to know how the Cathedral was built and the changes executed until our days. With this information, we started the elaboration of a virtual model of the Cathedral of Santa Maria. This model was introduced into a Finite Elements Method system to study the deformations suffered in the church during its construction in the XIV century, and the intervention made later in the XV, XVI and XX centuries. The efficiency of the virtual model simulating the geometry of the Cathedral along history allowed us to detect the cause of the structural damage, that was finally found in many unfortunate interventions along time.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_43.htm
last changed	2022/06/07 07:54

_id	2cb4
authors	Bille, Pia
year	1992
title	CAD at the AAA
doi	https://doi.org/10.52842/conf.ecaade.1992.279
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 279-288
summary	Teaching computer science at the Aarhus School of Architecture goes back as far as to the beginning of the 80’s, when a few teachers and students were curious towards the new media seeing its great developing perspectives and its possible use in the design of architecture. The curiosity and excitement about technology continued, although the results were modest and the usefulness not a dominant aspect in this early period. In the middle of the 80’s the School of Architecture was given the opportunity by means of state funding to buy the first 10 IBM PC's to run AutoCad among other programmes. Beside this a bigger CAD-system Gable 4D Series was introduced running on MicroVax Workstations. The software was dedicated to drafting buildings in 2 and 3 dimensions - an important task within the profession of architects.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	cef3
authors	Bridges, Alan H.
year	1992
title	Computing and Problem Based Learning at Delft University of Technology Faculty of Architecture
doi	https://doi.org/10.52842/conf.ecaade.1992.289
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 289-294
summary	Delft University of Technology, founded in 1842, is the oldest and largest technical university in the Netherlands. It provides education for more than 13,000 students in fifteen main subject areas. The Faculty of Architecture, Housing, Urban Design and Planning is one of the largest faculties of the DUT with some 2000 students and over 500 staff members. The course of study takes four academic years: a first year (Propaedeuse) and a further three years (Doctoraal) leading to the "ingenieur" qualification. The basic course material is delivered in the first two years and is taken by all students. The third and fourth years consist of a smaller number of compulsory subjects in each of the department's specialist areas together with a wide range of option choices. The five main subject areas the students may choose from for their specialisation are Architecture, Building and Project Management, Building Technology, Urban Design and Planning, and Housing. The curriculum of the Faculty has been radically revised over the last two years and is now based on the concept of "Problem-Based Learning". The subject matter taught is divided thematically into specific issues that are taught in six week blocks. The vehicles for these blocks are specially selected and adapted case studies prepared by teams of staff members. These provide a focus for integrating specialist subjects around a studio based design theme. In the case of second year this studio is largely computer-based: many drawings are produced by computer and several specially written computer applications are used in association with the specialist inputs. This paper describes the "block structure" used in second year, giving examples of the special computer programs used, but also raises a number of broader educational issues. Introduction of the block system arose as a method of curriculum integration in response to difficulties emerging from the independent functioning of strong discipline areas in the traditional work groups. The need for a greater level of selfdirected learning was recognised as opposed to the "passive information model" of student learning in which the students are seen as empty vessels to be filled with knowledge - which they are then usually unable to apply in design related contexts in the studio. Furthermore, the value of electives had been questioned: whilst enabling some diversity of choice, they may also be seen as diverting attention and resources from the real problems of teaching architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2000.057
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
doi	https://doi.org/10.52842/conf.caadria.2010.443
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	91c4
authors	Checkland, P.
year	1981
title	Systems Thinking, Systems Practice
source	John Wiley & Sons, Chichester
summary	Whether by design, accident or merely synchronicity, Checkland appears to have developed a habit of writing seminal publications near the start of each decade which establish the basis and framework for systems methodology research for that decade."" Hamish Rennie, Journal of the Operational Research Society, 1992 Thirty years ago Peter Checkland set out to test whether the Systems Engineering (SE) approach, highly successful in technical problems, could be used by managers coping with the unfolding complexities of organizational life. The straightforward transfer of SE to the broader situations of management was not possible, but by insisting on a combination of systems thinking strongly linked to real-world practice Checkland and his collaborators developed an alternative approach - Soft Systems Methodology (SSM) - which enables managers of all kinds and at any level to deal with the subtleties and confusions of the situations they face. This work established the now accepted distinction between hard systems thinking, in which parts of the world are taken to be systems which can be engineered, and soft systems thinking in which the focus is on making sure the process of inquiry into real-world complexity is itself a system for learning. Systems Thinking, Systems Practice (1981) and Soft Systems Methodology in Action (1990) together with an earlier paper Towards a Systems-based Methodology for Real-World Problem Solving (1972) have long been recognized as classics in the field. Now Peter Checkland has looked back over the three decades of SSM development, brought the account of it up to date, and reflected on the whole evolutionary process which has produced a mature SSM. SSM: A 30-Year Retrospective, here included with Systems Thinking, Systems Practice closes a chapter on what is undoubtedly the most significant single research programme on the use of systems ideas in problem solving. Now retired from full-time university work, Peter Checkland continues his research as a Leverhulme Emeritus Fellow. "
series	other
last changed	2003/04/23 15:14

_id	caadria2007_659
id	caadria2007_659
authors	Chen, Zi-Ru
year	2007
title	The Combination of Design Media and Design Creativity _ Conventional and Digital Media
doi	https://doi.org/10.52842/conf.caadria.2007.x.w5x
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Creativity is always interested in many fields, in particular, creativity and design creativity have many interpretations (Boden, 1991; Gero and Maher, 1992, 1993; Kim, 1990; Sternberg, 1988; Weisberg, 1986). In early conceptual design process, designers used large number of sketches and drawings (Purcell and Gero, 1998). The sketch can inspire the designer to increase the creativity of the designer’s creations(Schenk, 1991; Goldschmidt, 1994; Suwa and Tversky, 1997). The freehand sketches by conventional media have been believed to play important roles in processes of the creative design thinking(Goldschmidt, 1991; Schon and Wiggins, 1992; Goel, 1995; Suwa et al., 2000; Verstijnen et al., 1998; Elsas van and Vergeest, 1998). Recently, there are many researches on inspiration of the design creativity by digital media(Liu, 2001; Sasada, 1999). The digital media have been used to apply the creative activities and that caused the occurrenssce of unexpected discovery in early design processes(Gero and Maher, 1993; Mitchell, 1993; Schmitt, 1994; Gero, 1996, 2000; Coyne and Subrahmanian, 1993; Boden, 1998; Huang, 2001; Chen, 2001; Manolya et al. 1998; Verstijinen et al., 1998; Lynn, 2001). In addition, there are many applications by combination of conventional and digital media in the sketches conceptual process. However, previous works only discussed that the individual media were related to the design creativity. The cognitive research about the application of conceptual sketches design by integrating both conventional and digital media simultaneously is absent.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2006_617
id	caadria2006_617
authors	CHING-CHIEN LIN
year	2006
title	A GREATER SENSE OF PRESENCE: SPATIAL INTERFACE IN VR CAVE
doi	https://doi.org/10.52842/conf.caadria.2006.x.j1m
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 617-619
summary	Virtual environments are three–dimensional spaces presented visually. They combine the user’s experience and sense of 'being there' in the virtual environment. Presence is a central element of virtual reality that it is seen as a part of its definition (Steuer, 1992). Direct interactions between participants and the virtual environment generate a more enhanced sense of immersion, thus making the participants feels they are part of that environment (Witmer & Singer, 1998).
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	c434
authors	Colajanni, B., Pellitteri, G. and Scianna, A.
year	1992
title	Two Approaches to Teaching Computers in Architecture: The Experience in the Faculty of Engineering in Palermo, Italy
doi	https://doi.org/10.52842/conf.ecaade.1992.295
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 295-306
summary	Teaching the use of computers in architecture poses the same kind of problems as teaching mathematics. To both there are two possible approaches. The first presents the discipline as a tool of which the merely instrumental aspect is emphasized. Teaching is limited to show the results obtainable by existing programs and how to get them. The second approach, on the contrary emphasizes the autonomous nature of the discipline, mathematics as much as computing, on the basis of the convincement that the maximum of instrumental usefulness can be obtained through the knowledge at the highest degree of generality and, then, of abstraction. The first approach changes little in the mind of the student. He simply learns that is possible, and then worthy doing, a certain amount of operations, mainly checks of performances (and not only the control of the aspect, now easy with one of the many existing CAD) or searches of technical informations in some database. The second approach gives the student the consciousness of the manageability of abstract structures of relationships. He acquires then the idea of creating by himself particular structures of relationships and managing them. This can modify the very idea of the design procedure giving the student the consciousness that he can intervene directly in every segment of the design procedure, reshaping it to some extent in a way better suited to the particular problem he is dealing with. Of course this second approach implies learning not only a language but also the capability of coming to terms with languages. And again it is a cultural acquisition that can be very useful when referred to the languages of architecture. Furthermore the capability of simulating on the computer also a small segment of the design process gives the student a better understanding both of the particular problem he is dealing with and of the very nature of design. As for the first effect, it happens whenever a translation is done from a language to another one. One is obliged to get to the core of the matter in order to overcome the difficulties rising from the different bias of the two languages. The second effect comes from the necessity of placing the studied segment in the general flow of the design process. The organisation in a linear sequence of action to be accomplished recursively in an order always varying in any design occasion is an extremely useful exercise to understand the signification and the techniques of formalisation of design problems.
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: