Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 244

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	a302
authors	Saggio, Antonino
year	1992
title	A New Tool for Studio Teaching - Object Based Modeling
doi	https://doi.org/10.52842/conf.ecaade.1992.251
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 251-264
summary	The scope of this paper is to present Computer Aided Architectural Design (and more particularly the dynamic and incremental modeling characteristics of Object Based Modeling) as a tool to reinforce the teaching of architectural design. Utilized within a method based on a cyclical application of "Concept and Testing", OBM has the possibility to work as an amplifier of design ideas and as a meaningful tool for the advancement of architectural design. Three related experiences support this hypothesis. The role played in concrete designs by an Object Based Modeling environment. Teaching with CAAD and OBM in the realm of documentation and analysis of architecture. Previous applications of the Concept-Testing methodology in design studios. The central sections of the paper focus on the analysis of these experiences, while the last section provides a 15 week, semester based, studio structure that incorporates OBM in the overall calendar and in key assignments. While the scope of this work coincides with the thesis presented at the Acadia '92 conference in Charleston (South Carolina), to focus the argument more clearly content, text and illustrations differ in several parts.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	c93a
authors	Saggio, Antonino
year	1992
title	Object Based Modeling and Concept-Testing: A Framework for Studio Teaching
doi	https://doi.org/10.52842/conf.acadia.1992.049
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 49-63
summary	This chapter concludes with a proposal for a studio structure that incorporates computers as a creative stimulus in the design process. Three related experiences support this hypothesis: the role played in concrete designs by an Object Based Modeling environment, teaching with Computer Aided Architectural Design and OBM in the realm of documentation and analysis of architecture, previous applications of the Concept-Testing methodology in design studios. Examples from these three areas provide the framework for mutual support between OBM and a C-T approach for studio teaching. The central sections of the chapter focus on the analysis of these experiences, while the last section provides a 15 week, semester based, studio structure that incorporates OBM in the overall calendar and in key assignments.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	58c5
authors	Van Wezel, Ruud
year	1992
title	MOCK-UP SYSTEM WAGENINGEN: DEVELOPMENT, LIMITATION AND FUTURE
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part A, pp. 15-18
summary	A brief description of the development of the Mock-up System (MUS) in the context of the Wageningen training program. The students are first taught some keywords in understanding of the building process. They are then trained to express how they want to live (theory) and later on they confront themselves with what they have built in the MUS (practice) . Besides being an educational tool, the MUS is used for pre-building evaluation and research questions. The drawbacks or limitations of the system (outdoor reality versus indoor simulation) and future use by different target groups are also discussed in this paper. The power of the MUS is, and will continue to be, the concrete building of communicational results and the generation of communication by doing so.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:30

_id	c915
authors	Weber, Bendicht
year	1992
title	TOOLS RECONSIDERED: SIX AFFIRMATIONS
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part B, pp. 49-54
summary	This paper intends to formulate and discuss some unavoidable questions about the use of drawings, models and other tools by architects and other people concerned with architectural projects. These questions are presented as provocative affirmations: Every tool is an obstacle. Every tool is a trap. There is no complete tool. Fast tools shorten the time for reflection. Better tools don't automatically produce better architecture. Every real building betrays previous drawings, models, etc.The article shows that the choice of tools and the manner of their application are not innocent, that - independantly from the working-situation - tools must be considered from a critical standpoint and with particular attention to complementarities between several tools. We finally identify the development, discussion and valuation of concrete spatial qualities as the most difficult stake of such indirect working methods.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:41

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	3ff5
authors	Abbo, I.A., La Scalea, L., Otero, E. and Castaneda, L.
year	1992
title	Full-Scale Simulations as Tool for Developing Spatial Design Ability
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part C, pp. 7-10
summary	Spatial Design Ability has been defined as the capability to anticipate effects (psychological impressions on potential observers or users) produced by mental manipulation of elements of architectural or urban spaces. This ability, of great importance in choosing the appropriate option during the design process, is not specifically developed in schools of architecture and is partially obtained as a by-product of drawing, designing or architectural criticism. We use our Laboratory as a tool to present spaces to people so that they can evaluate them. By means of a series of exercises, students confront their anticipations with the psychological impressions produced in other people. For this occasion, we present an experience in which students had to propose a space for an exhibition hag in which architectural projects (student thesis) were to be shown. Following the Spatial Design Ability Development Model which we have been using for several years, students first get acquainted with the use of evaluation instruments for psychological impressions as well as with research methodology. In this case, due to the short period available, we reduced research to investigate the effects produced by the manipulation of only 2 independents variables: students manipulated first the form of the roof, walls and interiors elements, secondly, color and texture of those elements. They evaluated spatial quality, character and the other psychological impressions that manipulations produced in people. They used three dimensional scale models 1/10 and 1/1.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
email
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	6208
authors	Abou-Jaoude, Georges
year	1992
title	To Master a Tool
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part B, p. 15
summary	The tool here is the computer or to be precise, a unit that includes the computer, the peripherals and the software needed to fulfill a task. These tools are getting very sophisticated and user interfaces extremly friendly, therefore it is very easy to become the slave of such electronic tools and reach self satisfaction with strait forward results and attractive images. In order to master and not to become slaves of sophisticated tools, a very solid knowledge of related fields or domains of application becomes necessary. In the case of this seminar, full scale modelling, is a way to understand the relation between a mental model and it's full-scale modelling, it is a way of communicating what is in a designers mind. Computers and design programs can have the same goal, rather than chosing one method or the other let us try to say how important it is today to complement designing with computer with other means and media such as full scale modelling, and what computer modelling and simulation can bring to full scale modelling or other means.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	acadia06_455
id	acadia06_455
authors	Ambach, Barbara
year	2006
title	Eve’s Four Faces interactive surface configurations
doi	https://doi.org/10.52842/conf.acadia.2006.455
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 455-460
summary	Eve’s Four Faces consists of a series of digitally animated and interactive surfaces. Their content and structure are derived from a collection of sources outside the conventional boundaries of architectural research, namely psychology and the broader spectrum of arts and culture.The investigation stems from a psychological study documenting the attributes and social relationships of four distinct personality prototypes: the Individuated, the Traditional, the Conflicted, and the Assured (York and John 1992). For the purposes of this investigation, all four prototypes are assumed to be inherent, to certain degrees, in each individual. However, the propensity towards one of the prototypes forms the basis for each individual’s “personality structure.” The attributes, social implications and prospects for habitation have been translated into animations and surfaces operating within A House for Eve’s Four Faces. The presentation illustrates the potential for constructed surfaces to be configured and transformed interactively, responding to the needs and qualities associated with each prototype. The intention is to study the effects of each configuration and how each configuration may be therapeutic in supporting, challenging or altering one’s personality as it oscillates and shifts through the four prototypical conditions.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2006_040
id	2006_040
authors	Ambach, Barbara
year	2006
title	Eve’s Four Faces-Interactive surface configurations
doi	https://doi.org/10.52842/conf.ecaade.2006.040
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 40-44
summary	Eve’s Four Faces consists of a series of digitally animated and interactive surfaces. Their content and structure are derived from a collection of sources outside the conventional boundaries of architectural research, namely psychology and the broader spectrum of arts and culture. The investigation stems from a psychological study documenting the attributes and social relationships of four distinct personality prototypes; the “Individuated”, the “Traditional”, the “Conflicted” and the “Assured”. (York and John, 1992) For the purposes of this investigation, all four prototypes are assumed to be inherent, to certain degrees, in each individual; however, the propensity towards one of the prototypes forms the basis for each individual’s “personality structure”. The attributes, social implications and prospects for habitation have been translated into animations and surfaces operating within A House for Eve’s Four Faces. The presentation illustrates the potential for constructed surfaces to be configured and transformed interactively, responding to the needs and qualities associated with each prototype. The intention is to study the effects of each configuration and how it may be therapeutic in supporting, challenging or altering one’s personality as it oscillates and shifts through the four prototypical conditions.
keywords	interaction; digital; environments; psychology; prototypes
series	eCAADe
type	normal paper
last changed	2022/06/07 07:54

_id	4704
authors	Amirante, I., Rinaldi, S. and Muzzillo, F.
year	1992
title	A Tutorial Experiment Concerning Dampness Diagnosis Supported by an Expert System
doi	https://doi.org/10.52842/conf.ecaade.1992.159
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 159-172
summary	(A) The teaching of Technology of Building Rehabilitation in Italian Universities - (B) Experimental course of technological rehabilitation with computer tools - (C) Synthesis of technological approach - (D) Dampness diagnostic process using the Expert System - (E) Primary consideration on tutorial experience - (F) Bibliography
series	eCAADe
last changed	2022/06/07 07:54

_id	ce98
authors	Anderson, Lee
year	1992
title	Virtual Graffiti Three-Dimensional Paint Tools for Conceptual Modeling in Upfront
doi	https://doi.org/10.52842/conf.acadia.1992.127
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 127-133
summary	This chapter describes several limitations present in current 3-D programs used for conceptual design and then introduces a new threedimensional paint tool, as implemented in a beta version of Alias Upfront, that attempts to deal with some of those limitations.
series	ACADIA
last changed	2022/06/07 07:54

_id	735a
authors	Anh, Tran Hoai
year	1992
title	FULL-SCALE EXPERIMENT ON KITCHEN FUNCTION IN HANOI
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part A, pp. 19-30
summary	This study is a part of a licentiate thesis on "Functional kitchen for the Vietnamese cooking way"at the Department of Architecture and Development studies, Lund University. The issues it is dealing with are: (1) Inadequacy of kitchen design in the apartment buildings in Hanoi, where the kitchen is often designed as a mere cooking place - other parts of the food making process are not given any attention. (2) Lack of standard dimensional and planning criteria for functional kitchen which can serve as bases for kitchen design. // The thesis aims at finding out indicators on functional spatial requirements for kitchen, which can serve as guide-line for designing functional kitchen for Hanoi. One of the main propositions in the thesis is that functional kitchens for Hanoi should be organised to permit the culinary activities done according to the Vietnamese urban culinary practice. This is based on the concept that the culinary activity is an expression Of culture, thus the practice of preparing meal in the present context of the urban households in Hanoi has an established pattern, method which demand a suitable area and arrangement in the kitchen. This pattern and cooking method should make up the functional requirement for kitchen in Hanoi, and be taken in to account if functional kitchen designing is to be achieved. In the context of the space-limited apartment building of Hanoi, special focus is given to find out indicators on the minimum functional spatial requirements of the kitchen works.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:29

_id	7291
authors	Arvesen, Liv
year	1992
title	Measures and the Unmeasurable
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part C, pp. 11-16
summary	Nowhere do we ever find a similar environment as the one related to the tea ceremony. We may learn from the teamasters as we may learn from our masters of architecture. Directly and indirectly we are influenced by our surroundings which have been proved by research and which we ourselves experience in our daily life. The full scale experiments have been made on this subject. Related to the nervous mind the experiments were concentrated of form expressing safety and peace.
keywords	Full-scale Modeling,Model Simulation, Real Environments
series	other
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	0293
authors	Asanowicz, A., Jakimowicz, A., Koperski, A. And Sawicki, B.
year	1992
title	Education Center of Computer Aided Design: Technical University of Bialystok, Poland - Hopes, Possibilities, Limitations.
doi	https://doi.org/10.52842/conf.ecaade.1992.267
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 267-272
summary	This paper describes a Project of Professional Computer Aided Design Education in Bialystock (Poland).
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6270
authors	Atac, Ibrahim
year	1992
title	CAAD Education and Post-Graduate Opportunities (At Mimar Sinan University)
doi	https://doi.org/10.52842/conf.ecaade.1992.273
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 273-278
summary	This paper addresses new design teaching strategies at an important and traditional university in Istanbul, founded as the Academy of Fine Arts 110 years ago. It will include a short review of design education before the Academy changed into a university, and a description of the present situation with regard to computers. Nearly two years ago, CAAD education was introduced as an elective subject. The students show great interest in CAD; most Turkish architects now work with computers and CAAD graphics, although automated architecture has not yet become firmly established. The aim of the CAD studio is also to establish an institute which will allow university staff to develop their own programs and to pursue scientific research in this field. On the basis of rising requests from researchers and students, rapid and healthy developments should be made to keep up with new technologies. As the improvement of the specialized involvement with CAD is the future target, MSU is attempting to broaden its horizon by including design methodologies of the last decades.
series	eCAADe
last changed	2022/06/07 07:54

_id	10b7
authors	Aukstakalnis, Steve and Blatner, David
year	1992
title	Silicon Mirage: The Art and Science of Virtual Reality
source	Peachpit Press
summary	An introduction to virtual reality covers every aspect of the revolutionary new technology and its many possible applications, from computer games to air traffic control. Original. National ad/promo.
series	other
last changed	2003/04/23 15:14

_id	ascaad2022_043
id	ascaad2022_043
authors	Awan, Abeeha; Prokop, Simon; Vele, Jiri; Dounas, Theodor; Lombardi, Davide; Agkathidis, Asterios; Kurilla, Lukas
year	2022
title	Qualitative Knowledge Graph for the Evaluation of Metaverse(s) - Is the Metaverse Hype or a Promising New Field for Architects?
source	Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 99-116
summary	With the advancement of augmented and virtual reality technologies both in scale as well as accessibility, the Metaverse (Stephenson, 1992, Hughes, 2022) has emerged as a new digital space with potential for the application of architectural creativity and design. With blockchain integration, the concept of the Metaverse shows promise in creating a “decentralised” space for design and creativity with rewards for its participants. As a platform that incorporates these technological components, does the Metaverse have utility for architectural design? Is there something truly novel in what the Metaverse brings to architectural computing, and architectural design? The paper constructs a qualitative knowledge graph that can be used for the evaluation of various kinds of Metaverses in and for architectural design. We use Design Science Research methods to develop the knowledge graph and its evaluative capacity, stemming from our experience with two Metaverses, Decentraland and Cryptovoxels. The paper concludes with a discussion of knowledge and practice gaps that are evident, framing the opportunities that architects might have in the future in terms of developing Metaverse(s).
series	ASCAAD
email
last changed	2024/02/16 13:24

_id	60e7
authors	Bailey, Rohan
year	2000
title	The Intelligent Sketch: Developing a Conceptual Model for a Digital Design Assistant
doi	https://doi.org/10.52842/conf.acadia.2000.137
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 137-145
summary	The computer is a relatively new tool in the practice of Architecture. Since its introduction, there has been a desire amongst designers to use this new tool quite early in the design process. However, contrary to this desire, most Architects today use pen and paper in the very early stages of design to sketch. Architects solve problems by thinking visually. One of the most important tools that the Architect has at his disposal in the design process is the hand sketch. This iterative way of testing ideas and informing the design process with images fundamentally directs and aids the architect’s decision making. It has been said (Schön and Wiggins 1992) that sketching is about the reflective conversation designers have with images and ideas conveyed by the act of drawing. It is highly dependent on feedback. This “conversation” is an area worthy of investigation. Understanding this “conversation” is significant to understanding how we might apply the computer to enhance the designer’s ability to capture, manipulate and reflect on ideas during conceptual design. This paper discusses sketching and its relation to design thinking. It explores the conversations that designers engage in with the media they use. This is done through the explanation of a protocol analysis method. Protocol analysis used in the field of psychology, has been used extensively by Eastman et al (starting in the early 70s) as a method to elicit information about design thinking. In the pilot experiment described in this paper, two persons are used. One plays the role of the “hand” while the other is the “mind”- the two elements that are involved in the design “conversation”. This variation on classical protocol analysis sets out to discover how “intelligent” the hand should be to enhance design by reflection. The paper describes the procedures entailed in the pilot experiment and the resulting data. The paper then concludes by discussing future intentions for research and the far reaching possibilities for use of the computer in architectural studio teaching (as teaching aids) as well as a digital design assistant in conceptual design.
keywords	CAAD, Sketching, Protocol Analysis, Design Thinking, Design Education
series	ACADIA
last changed	2022/06/07 07:54

_id	a6d8
authors	Baletic, Bojan
year	1992
title	Information Codes of Mutant Forms
doi	https://doi.org/10.52842/conf.ecaade.1992.173
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 173-186
summary	If we assume that the statements from this quote are true, than we have to ask ourselves the question: "Should we teach architecture as we do?" This paper describes our experience in developing a knowledge base using a neural network system to serve as a "intelligent assistant" to students and other practicing architects in the conceptual phase of their work on housing design. Our approach concentrated on rising the awareness of the designer about the problem, not by building rules to guide him to a solution, but by questioning the categories and typologies by which he classifies and understands a problem. This we achieve through examples containing mutant forms, imperfect rules, gray zones between black and white, that carry the seeds of new solutions.
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: