Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 247

Reformat results as: short short into frame detailed detailed into frame

_id	6270
authors	Atac, Ibrahim
year	1992
title	CAAD Education and Post-Graduate Opportunities (At Mimar Sinan University)
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 273-278
doi	https://doi.org/10.52842/conf.ecaade.1992.273
summary	This paper addresses new design teaching strategies at an important and traditional university in Istanbul, founded as the Academy of Fine Arts 110 years ago. It will include a short review of design education before the Academy changed into a university, and a description of the present situation with regard to computers. Nearly two years ago, CAAD education was introduced as an elective subject. The students show great interest in CAD; most Turkish architects now work with computers and CAAD graphics, although automated architecture has not yet become firmly established. The aim of the CAD studio is also to establish an institute which will allow university staff to develop their own programs and to pursue scientific research in this field. On the basis of rising requests from researchers and students, rapid and healthy developments should be made to keep up with new technologies. As the improvement of the specialized involvement with CAD is the future target, MSU is attempting to broaden its horizon by including design methodologies of the last decades.
series	eCAADe
last changed	2022/06/07 07:54

_id	60e7
authors	Bailey, Rohan
year	2000
title	The Intelligent Sketch: Developing a Conceptual Model for a Digital Design Assistant
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 137-145
doi	https://doi.org/10.52842/conf.acadia.2000.137
summary	The computer is a relatively new tool in the practice of Architecture. Since its introduction, there has been a desire amongst designers to use this new tool quite early in the design process. However, contrary to this desire, most Architects today use pen and paper in the very early stages of design to sketch. Architects solve problems by thinking visually. One of the most important tools that the Architect has at his disposal in the design process is the hand sketch. This iterative way of testing ideas and informing the design process with images fundamentally directs and aids the architect’s decision making. It has been said (Schön and Wiggins 1992) that sketching is about the reflective conversation designers have with images and ideas conveyed by the act of drawing. It is highly dependent on feedback. This “conversation” is an area worthy of investigation. Understanding this “conversation” is significant to understanding how we might apply the computer to enhance the designer’s ability to capture, manipulate and reflect on ideas during conceptual design. This paper discusses sketching and its relation to design thinking. It explores the conversations that designers engage in with the media they use. This is done through the explanation of a protocol analysis method. Protocol analysis used in the field of psychology, has been used extensively by Eastman et al (starting in the early 70s) as a method to elicit information about design thinking. In the pilot experiment described in this paper, two persons are used. One plays the role of the “hand” while the other is the “mind”- the two elements that are involved in the design “conversation”. This variation on classical protocol analysis sets out to discover how “intelligent” the hand should be to enhance design by reflection. The paper describes the procedures entailed in the pilot experiment and the resulting data. The paper then concludes by discussing future intentions for research and the far reaching possibilities for use of the computer in architectural studio teaching (as teaching aids) as well as a digital design assistant in conceptual design.
keywords	CAAD, Sketching, Protocol Analysis, Design Thinking, Design Education
series	ACADIA
last changed	2022/06/07 07:54

_id	6d1d
authors	Daru, R. and Daru, M.
year	1992
title	Personal Working Styles in the CMD Studio
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 451-472
doi	https://doi.org/10.52842/conf.ecaade.1992.451
summary	Normative and problem-solving approaches of architectural design ignore the personality aspects of the designing activity. Every architect approaches projects according to her/his own strategies and tactics. Usually they do not conform to the prescriptive models of design theoreticians. Computer aided design tools should be adapted to their utility within the strategies and tactics of each and every architectural student. We are testing the usefulness of CAAD tools developed by others or ourselves and identifying the needs for missing tools. It is already clear that many CAAD tools reflect the point of view of the programmer about strategies and tactics of designing and that they do not take into account the idiosyncrasies of the end user. Forcing the tools on students breeds the risk of fostering repulsion against ill-adapted tools, and consequently against CMD. Our research group pursues empirical research on working styles of designing by practising architects within the frame of a personality theory of actions. The results indicate that there are three main directions for designing strategies. If we want to take into account the real-world behaviour in design practice within architectural education, this implies the diversification of the exercises we offer to the students in threefold, corresponding with the three directions. To this, we add the didactic options of complementation, compensation and support, depending on what we know about the strong or weak points of the students involved. We have started proposing choices for the exercises of our design morphology studio. Students are offered approaches and tools we consider best adapted to their own working
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ed78
authors	Jog, Bharati
year	1993
title	Integration of Computer Applications in the Practice of Architecture
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 89-97
doi	https://doi.org/10.52842/conf.acadia.1993.089
summary	Computer Applications in Architecture is emerging as an important aspect of our profession. The field, which is often referred to as Computer-Aided Architectural Design (CAAD) has had a notable impact on the profession and academia in recent years. A few professionals have predicted that as slide rules were replaced by calculators, in the coming years drafting boards and parallel bars will be replaced by computers. On the other hand, many architects do not anticipate such a drastic change in the coming decade as present CAD systems are supporting only a few integral aspects of architectural design. However, all agree that architecture curricula should be modified to integrate CAAD education. In 1992-93, in the Department of Architecture of the 'School of Architecture and interior Design' at the University of Cincinnati, a curriculum committee was formed to review and modify the entire architecture curriculum. Since our profession and academia relate directly to each other, the author felt that while revising the curriculum, the committee should have factual information about CAD usage in the industry. Three ways to obtain such information were thought of, namely (1) conducting person to person or telephone interviews with the practitioners (2) requesting firms to give open- ended feed back and (3) surveying firms by sending a questionnaire. Of these three, the most effective, efficient and suitable method to obtain such information was an organized survey through a questionnaire. In mid December 1992, a survey was organized which was sponsored by the School of Architecture and Interior Design, the Center for the Study of the Practice of Architecture (CSPA) and the University Division of Professional Practice, all from the University of Cincinnati. This chapter focuses on the results of this survey. A brief description of the survey design is also given. In the next section a few surveys organized in recent years are listed. In the third section the design of this survey is presented. The survey questions and their responses are given in the fourth section. The last section presents the conclusions and brief recommendations regarding computer curriculum in architecture.
series	ACADIA
last changed	2022/06/07 07:52

_id	ed4a
authors	Kalisperis, Loukas N. and Groninger, Randal L.
year	1992
title	Design Philosophy: Implications for Computer Integration in the Practice of Architecture
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 27-37
doi	https://doi.org/10.52842/conf.acadia.1992.027
summary	The growing complexities of modern environments and the socioeconomic pressures to maintain efficient design/build cycles have forced architects to seek new tools and methods to help them manage the processes that have developed as a result of new knowledge in architectural design. This trend has accelerated in the past few decades because of developments in both cognitive and computer sciences. In allied disciplines, the introduction and use of comPuters have significantly improved design practices. Yet at best, in disciplines such as architectural design, computational aids have attained marginal improvements in the design process despite efforts by universities in the professional education of architects.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	6f8a
authors	Pittioni, Gernot
year	1992
title	Concepts of CAAD-Instruction
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 363-376
doi	https://doi.org/10.52842/conf.ecaade.1992.363
summary	Today we can look back on several years of data processing support in architecture. When computer aided architectural design - CAAD - entered the field there was a lot of utter confusion in the beginning, a lot more than usually in other more technical application-fields of CAD. The architect is a very special CAD-user, as he is a very special member of all those other very analytical and scientific faculties around. There is a lot of tradition involved, tradition that has got its roots far back in medieval and classic periods and is rich of art and creativity and intuition. Mostly lots more of this than scientific analysis, exact research, and similar stuff. We could spot a large number of architects who would have been horrified when they are confronted with the analytic research of the very basic problem as how architects are designing - the methods, the procedures and the ways of thinking. And there CAAD was entering the architects' studios. No question that this caused a lot of trouble. CAD in architecture is a very provoking subject as the new tool is going to gain ground against the tradition of centuries of handmade architectural designs and drawings. And there we don't even touch the future aspects of the computer's architectural design support - what about the imminent threat of computer support in the holy domain of architectural creativity and intuition. What about the uneasy idea of CAAD in connection with artificial intelligence? The problem of CAAD-education has been largely neglected through a number of years. If there existed a certain horror looking at the mere idea of CAD-support in architecture, horror became to outrage, when university education was discussed. In our days we can stay a good deal more relaxed, when we speak of CAAD education - we not only got used to it, we are convinced, that the whole subject is of high importance.
keywords	Concepts of Education
series	eCAADe
email
last changed	2022/06/07 08:00

_id	0293
authors	Asanowicz, A., Jakimowicz, A., Koperski, A. And Sawicki, B.
year	1992
title	Education Center of Computer Aided Design: Technical University of Bialystok, Poland - Hopes, Possibilities, Limitations.
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 267-272
doi	https://doi.org/10.52842/conf.ecaade.1992.267
summary	This paper describes a Project of Professional Computer Aided Design Education in Bialystock (Poland).
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2022_043
id	ascaad2022_043
authors	Awan, Abeeha; Prokop, Simon; Vele, Jiri; Dounas, Theodor; Lombardi, Davide; Agkathidis, Asterios; Kurilla, Lukas
year	2022
title	Qualitative Knowledge Graph for the Evaluation of Metaverse(s) - Is the Metaverse Hype or a Promising New Field for Architects?
source	Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 99-116
summary	With the advancement of augmented and virtual reality technologies both in scale as well as accessibility, the Metaverse (Stephenson, 1992, Hughes, 2022) has emerged as a new digital space with potential for the application of architectural creativity and design. With blockchain integration, the concept of the Metaverse shows promise in creating a “decentralised” space for design and creativity with rewards for its participants. As a platform that incorporates these technological components, does the Metaverse have utility for architectural design? Is there something truly novel in what the Metaverse brings to architectural computing, and architectural design? The paper constructs a qualitative knowledge graph that can be used for the evaluation of various kinds of Metaverses in and for architectural design. We use Design Science Research methods to develop the knowledge graph and its evaluative capacity, stemming from our experience with two Metaverses, Decentraland and Cryptovoxels. The paper concludes with a discussion of knowledge and practice gaps that are evident, framing the opportunities that architects might have in the future in terms of developing Metaverse(s).
series	ASCAAD
email
last changed	2024/02/16 13:24

_id	a6d8
authors	Baletic, Bojan
year	1992
title	Information Codes of Mutant Forms
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 173-186
doi	https://doi.org/10.52842/conf.ecaade.1992.173
summary	If we assume that the statements from this quote are true, than we have to ask ourselves the question: "Should we teach architecture as we do?" This paper describes our experience in developing a knowledge base using a neural network system to serve as a "intelligent assistant" to students and other practicing architects in the conceptual phase of their work on housing design. Our approach concentrated on rising the awareness of the designer about the problem, not by building rules to guide him to a solution, but by questioning the categories and typologies by which he classifies and understands a problem. This we achieve through examples containing mutant forms, imperfect rules, gray zones between black and white, that carry the seeds of new solutions.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	328d
authors	Bassanino, May Nahab and Brown, Andre
year	1999
title	Computer Generated Architectural Images: A Comparative Study
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 552-556
doi	https://doi.org/10.52842/conf.ecaade.1999.552
summary	This work is part of a long term research programme (Brown and Horton, 1992; Brown and Nahab, 1996; Bassanino, 1999) in which tests and studies have been carried out on various groups of people to investigate their reaction to, and interpretation of different forms of architectural representation. In the work described here a range of architectural schemes were presented using particular representational techniques and media. An experiment was then undertaken on two different groups; architects and lay people. They were presented with a number of schemes displayed using the various techniques and media. The responses are summarised and some comments are made on the effect of computers on perceiving architecture and on communicating architectural ideas arising from an analysis of the responses.
keywords	Subject, Image Type, Presentation Technique, Medium, SD Scales, Factors
series	eCAADe
email
last changed	2022/06/07 07:54

_id	aa78
authors	Bayazit, Nigan
year	1992
title	Requirements of an Expert System for Design Studios
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 187-194
doi	https://doi.org/10.52842/conf.ecaade.1992.187
summary	The goal of this paper is to study problems of the transition from traditional architectural studio teaching to CAAD studio teaching which requires a CAAD expert system as studio tutor, and to study the behavior of the student in this new environment. The differences between the traditional and computerized studio teaching and the experiences in this field are explained referring to the requirements for designing time in relation to the expertise of the student in the application of a CAD program. Learning styles and the process of design in computerized and non-computerized studio teaching are discussed. Design studio requirements of the students in traditional studio environment while doing design works are clarified depending on the results of an empirical study which explained the relations between the tutor and the student while they were doing studio critiques. Main complaints of the students raised in the empirical study were the lack of data in the specific design problem area, difficulties of realization of ideas and thoughts, not knowing the starting point of design, having no information about the references to be used for the specific design task, having difficulties in the application of presentation techniques. In the concluding parts of the paper are discussed the different styles of teaching and their relation to the CAAD environment, the transformation of the instructional programs for the new design environment, the future expectations from the CAAD programs, properties of the new teaching environment and the roles of the expert systems in design studio education.
keywords	CAAD Education, Expert System, Architectural Design Studio, Knowledge Acquisition
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	065b
authors	Beitia, S.S., Zulueta, A. and Barrallo, J.
year	1995
title	The Virtual Cathedral - An Essay about CAAD, History and Structure
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 355-360
doi	https://doi.org/10.52842/conf.ecaade.1995.355
summary	The Old Cathedral of Santa Maria in Vitoria is the most representative building of the Gothic style in the Basque Country. Built during the XIV century, it has been closed to the cult in 1994 because of the high risk of collapse that presents its structure. This closure was originated by the structural analysis that was entrusted to the University of the Basque Country in 1992. The topographic works developed in the Cathedral to elaborate the planimetry of the temple revealed that many structural elements of great importance like arches, buttresses and flying buttresses were removed, modified or added along the history of Santa Maria. The first structural analysis made in the church suggested that the huge deformations showed in the resistant elements, specially the piers, were originated by interventions made in the past. A deep historical investigation allowed us to know how the Cathedral was built and the changes executed until our days. With this information, we started the elaboration of a virtual model of the Cathedral of Santa Maria. This model was introduced into a Finite Elements Method system to study the deformations suffered in the church during its construction in the XIV century, and the intervention made later in the XV, XVI and XX centuries. The efficiency of the virtual model simulating the geometry of the Cathedral along history allowed us to detect the cause of the structural damage, that was finally found in many unfortunate interventions along time.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_43.htm
last changed	2022/06/07 07:54

_id	b2f9
id	b2f9
authors	Bhzad Sidawi and Neveen Hamza
year	2012
title	INTELLIGENT KNOWLEDGE-BASED REPOSITORY TO SUPPORT INFORMED DESIGN DECISION MAKING
source	ITCON journal
summary	Research highlights that architectural design is a social phenomenon that is underpinned by critical analysis of design precedents and the social interaction between designers including negotiation, collaboration and communication. CAAD systems are continuously developing as essential design tools in formulating and developing ideas. Researchers such as (Rosenman, Gero and Oxman 1992) have suggested suggest that knowledge based systems can be integrated with CAAD systems to provide design knowledge that would enable recalling design precedents that maybe linked to the design constraints. Currently CAAD systems are user centric being focused on architects rather than the end product. The systems provide limited assistance in the production of innovative design. Furthermore, the attention of the designers of knowledge based systems is providing a repository rather than a system that is capable to initiate innovation. Most of the CAAD systems have web communication tools that enable designers to communicate their design ideas with colleagues and partners in business. However, none of these systems have the capability to capture useful knowledge from the design negotiations. Students of the third to fifth year at College of Architecture, University of Dammam were surveyed and interviewed to find out how far design tools, communications and resources would impact the production of innovative design projects. The survey results show that knowledge extracted from design negotiations would impact the innovative design outcome. It highlights also that present design precedents are not very helpful and design negotiations between students, tutors and other students are not documented thus fully incorporated into the design scheme. The paper argues that the future CAAD systems should be capable to recognize innovative design precedents, and incorporate knowledge that is resulted from design negotiations. This would help students to gain a critical mass of knowledge that would underpin informed design decisions.
series	journal paper
type	normal paper
email
more	http://www.itcon.org/cgi-bin/works/Show?2012_20
last changed	2012/09/19 13:41

_id	2cb4
authors	Bille, Pia
year	1992
title	CAD at the AAA
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 279-288
doi	https://doi.org/10.52842/conf.ecaade.1992.279
summary	Teaching computer science at the Aarhus School of Architecture goes back as far as to the beginning of the 80’s, when a few teachers and students were curious towards the new media seeing its great developing perspectives and its possible use in the design of architecture. The curiosity and excitement about technology continued, although the results were modest and the usefulness not a dominant aspect in this early period. In the middle of the 80’s the School of Architecture was given the opportunity by means of state funding to buy the first 10 IBM PC's to run AutoCad among other programmes. Beside this a bigger CAD-system Gable 4D Series was introduced running on MicroVax Workstations. The software was dedicated to drafting buildings in 2 and 3 dimensions - an important task within the profession of architects.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	8d37
authors	Bradford, J.W., Ng, F.F. and Will, B.F.
year	1992
title	Models and Hypermedia for Architectural Education
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 19-42
doi	https://doi.org/10.52842/conf.ecaade.1992.019
summary	Hypermedia uses the hypertext style of interactive navigation through computer-based multimedia materials to provide access to a wealth of information for use by teachers and students. Academic disciplines concerned about the enlightenment of future designers of the built environment require an additional medium not yet available in hypermedia - interactive 3-D computer models. This paper discusses a hypermedia CAI system currently being developed at the University of Hong Kong for use in architectural education. The system uses interactive 3D computer models as another medium for instructional information, and as user orientation and database access devices. An object oriented, 3-D model hierarchy is used as the organizational structure for the database. A prototype which uses the system to teach undergraduate architecture students about a traditional Chinese temple is also illustrated. The prototype demonstrates the use of a computer as the medium for bilingual English and Chinese instruction.
keywords	3-D Modelling, Architectural Education, Computer Aided Instruction, Hypermedia, Multimedia
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cef3
authors	Bridges, Alan H.
year	1992
title	Computing and Problem Based Learning at Delft University of Technology Faculty of Architecture
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 289-294
doi	https://doi.org/10.52842/conf.ecaade.1992.289
summary	Delft University of Technology, founded in 1842, is the oldest and largest technical university in the Netherlands. It provides education for more than 13,000 students in fifteen main subject areas. The Faculty of Architecture, Housing, Urban Design and Planning is one of the largest faculties of the DUT with some 2000 students and over 500 staff members. The course of study takes four academic years: a first year (Propaedeuse) and a further three years (Doctoraal) leading to the "ingenieur" qualification. The basic course material is delivered in the first two years and is taken by all students. The third and fourth years consist of a smaller number of compulsory subjects in each of the department's specialist areas together with a wide range of option choices. The five main subject areas the students may choose from for their specialisation are Architecture, Building and Project Management, Building Technology, Urban Design and Planning, and Housing. The curriculum of the Faculty has been radically revised over the last two years and is now based on the concept of "Problem-Based Learning". The subject matter taught is divided thematically into specific issues that are taught in six week blocks. The vehicles for these blocks are specially selected and adapted case studies prepared by teams of staff members. These provide a focus for integrating specialist subjects around a studio based design theme. In the case of second year this studio is largely computer-based: many drawings are produced by computer and several specially written computer applications are used in association with the specialist inputs. This paper describes the "block structure" used in second year, giving examples of the special computer programs used, but also raises a number of broader educational issues. Introduction of the block system arose as a method of curriculum integration in response to difficulties emerging from the independent functioning of strong discipline areas in the traditional work groups. The need for a greater level of selfdirected learning was recognised as opposed to the "passive information model" of student learning in which the students are seen as empty vessels to be filled with knowledge - which they are then usually unable to apply in design related contexts in the studio. Furthermore, the value of electives had been questioned: whilst enabling some diversity of choice, they may also be seen as diverting attention and resources from the real problems of teaching architecture.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	89d9
authors	Cajati, Claudio
year	1992
title	The New Teaching of an Architect: The Rôle of Expert Systems in Technological Culture
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 435-442
doi	https://doi.org/10.52842/conf.ecaade.1992.435
summary	We already have the EEC, that is the European Economic Community. We have to build the CCE, that is the Common Cultural Europe. Architects and building engineers of any european country will be allowed to freely practise in any other country of the EEC. Of course, it is not only matter of coming down of the frontiers, of a greater labour mobility. Not even it will be enough that the university degree courses of the different countries agree to and put into effect the EEC common directives. They need rules and guidelines entering into the merits of practice: rules and guidelines which, rather than a legal and bureaucratic matter, must be the result of a common cultural and technical work, about clear and delimited questions of shared subjects, in which all the community countries be deeply concerned. Analogously, in the very field of research, the project "Human Capital and Mobility" has in view a greater european scientific and technological competitiveness, through an integration of human and material resources of different research centres, such as in shared-cost research projects and in concerted research actions. Such an integration is neither easy nor rapid. The political, social, cultural, technological peculiarities of the countries of the European Community certainly constitute an obstacle for the creation of a supernational cultural and technological pool. of common opportunities. These peculiarities, however, aren't only a restraint for the european community effort of unification and construction of shared goals, constraints, rules, methods, techniques, tools. They mean also a richness, an unrepeatable resourse: they are the result of a historical millenary stratification, which gave rise to urban and architectural contexts, to cultural and technological traditions it would be a serious mistake to waste.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
doi	https://doi.org/10.52842/conf.ecaade.2000.057
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	2312
authors	Carrara, G., Kalay Y.E. and Novembri, G.
year	1992
title	Multi-modal Representation of Design Knowledge
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 55-66
doi	https://doi.org/10.52842/conf.ecaade.1992.055
summary	Explicit representation of design knowledge is needed if scientific methods are to be applied in design research, and if computers are to be used in the aid of design education and practice. The representation of knowledge in general, and design knowledge in particular, have been the subject matter of computer science, design methods, and computer-aided design research for quite some time. Several models of design knowledge representation have been developed over the last 30 years, addressing specific aspects of the problem. This paper describes a different approach to design knowledge representation that recognizes the multimodal nature of design knowledge. It uses a variety of computational tools to encode different kinds of design knowledge, including the descriptive (objects), the prescriptive (goals) and the operational (methods) kinds. The representation is intended to form a parsimonious, communicable and presentable knowledge-base that can be used as a tool for design research and education as well as for CAAD.
keywords	Design Methods, Design Process Goals, Knowledge Representation, Semantic Networks
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: