Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 232

Reformat results as: short short into frame detailed detailed into frame

_id	6f8a
authors	Pittioni, Gernot
year	1992
title	Concepts of CAAD-Instruction
doi	https://doi.org/10.52842/conf.ecaade.1992.363
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 363-376
summary	Today we can look back on several years of data processing support in architecture. When computer aided architectural design - CAAD - entered the field there was a lot of utter confusion in the beginning, a lot more than usually in other more technical application-fields of CAD. The architect is a very special CAD-user, as he is a very special member of all those other very analytical and scientific faculties around. There is a lot of tradition involved, tradition that has got its roots far back in medieval and classic periods and is rich of art and creativity and intuition. Mostly lots more of this than scientific analysis, exact research, and similar stuff. We could spot a large number of architects who would have been horrified when they are confronted with the analytic research of the very basic problem as how architects are designing - the methods, the procedures and the ways of thinking. And there CAAD was entering the architects' studios. No question that this caused a lot of trouble. CAD in architecture is a very provoking subject as the new tool is going to gain ground against the tradition of centuries of handmade architectural designs and drawings. And there we don't even touch the future aspects of the computer's architectural design support - what about the imminent threat of computer support in the holy domain of architectural creativity and intuition. What about the uneasy idea of CAAD in connection with artificial intelligence? The problem of CAAD-education has been largely neglected through a number of years. If there existed a certain horror looking at the mere idea of CAD-support in architecture, horror became to outrage, when university education was discussed. In our days we can stay a good deal more relaxed, when we speak of CAAD education - we not only got used to it, we are convinced, that the whole subject is of high importance.
keywords	Concepts of Education
series	eCAADe
email
last changed	2022/06/07 08:00

_id	6cfd
authors	Harfmann, Anton C. and Majkowski, Bruce R.
year	1992
title	Component-Based Spatial Reasoning
doi	https://doi.org/10.52842/conf.acadia.1992.103
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 103-111
summary	The design process and ordering of individual components through which architecture is realized relies on the use of abstract "models" to represent a proposed design. The emergence and use of these abstract "models" for building representation has a long history and tradition in the field of architecture. Models have been made and continue to be made for the patron, occasionally the public, and as a guide for the builders. Models have also been described as a means to reflect on the design and to allow the design to be in dialogue with the creator. The term "model" in the above paragraph has been used in various ways and in this context is defined as any representation through which design intent is expressed. This includes accurate/ rational or abstract drawings (2- dimensional and 3-dimensional), physical models (realistic and abstract) and computer models (solid, void and virtual reality). The various models that fall within the categories above have been derived from the need to "view" the proposed design in various ways in order to support intuitive reasoning about the proposal and for evaluation purposes. For example, a 2-dimensional drawing of a floor plan is well suited to support reasoning about spatial relationships and circulation patterns while scaled 3-dimensional models facilitate reasoning about overall form, volume, light, massing etc. However, the common denominator of all architectural design projects (if the intent is to construct them in actual scale, physical form) are the discrete building elements from which the design will be constructed. It is proposed that a single computational model representing individual components supports all of the above "models" and facilitates "viewing"' the design according to the frame of reference of the viewer. Furthermore, it is the position of the authors that all reasoning stems from this rudimentary level of modeling individual components. The concept of component representation has been derived from the fact that a "real" building (made from individual components such as nuts, bolts and bar joists) can be "viewed" differently according to the frame of reference of the viewer. Each individual has the ability to infer and abstract from the assemblies of components a variety of different "models" ranging from a visceral, experiential understanding to a very technical, physical understanding. The component concept has already proven to be a valuable tool for reasoning about assemblies, interferences between components, tracing of load path and numerous other component related applications. In order to validate the component-based modeling concept this effort will focus on the development of spatial understanding from the component-based model. The discussions will, therefore, center about the representation of individual components and the development of spatial models and spatial reasoning from the component model. In order to frame the argument that spatial modeling and reasoning can be derived from the component representation, a review of the component-based modeling concept will precede the discussions of spatial issues.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ascaad2022_043
id	ascaad2022_043
authors	Awan, Abeeha; Prokop, Simon; Vele, Jiri; Dounas, Theodor; Lombardi, Davide; Agkathidis, Asterios; Kurilla, Lukas
year	2022
title	Qualitative Knowledge Graph for the Evaluation of Metaverse(s) - Is the Metaverse Hype or a Promising New Field for Architects?
source	Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 99-116
summary	With the advancement of augmented and virtual reality technologies both in scale as well as accessibility, the Metaverse (Stephenson, 1992, Hughes, 2022) has emerged as a new digital space with potential for the application of architectural creativity and design. With blockchain integration, the concept of the Metaverse shows promise in creating a “decentralised” space for design and creativity with rewards for its participants. As a platform that incorporates these technological components, does the Metaverse have utility for architectural design? Is there something truly novel in what the Metaverse brings to architectural computing, and architectural design? The paper constructs a qualitative knowledge graph that can be used for the evaluation of various kinds of Metaverses in and for architectural design. We use Design Science Research methods to develop the knowledge graph and its evaluative capacity, stemming from our experience with two Metaverses, Decentraland and Cryptovoxels. The paper concludes with a discussion of knowledge and practice gaps that are evident, framing the opportunities that architects might have in the future in terms of developing Metaverse(s).
series	ASCAAD
email
last changed	2024/02/16 13:24

_id	caadria2007_659
id	caadria2007_659
authors	Chen, Zi-Ru
year	2007
title	The Combination of Design Media and Design Creativity _ Conventional and Digital Media
doi	https://doi.org/10.52842/conf.caadria.2007.x.w5x
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Creativity is always interested in many fields, in particular, creativity and design creativity have many interpretations (Boden, 1991; Gero and Maher, 1992, 1993; Kim, 1990; Sternberg, 1988; Weisberg, 1986). In early conceptual design process, designers used large number of sketches and drawings (Purcell and Gero, 1998). The sketch can inspire the designer to increase the creativity of the designer’s creations(Schenk, 1991; Goldschmidt, 1994; Suwa and Tversky, 1997). The freehand sketches by conventional media have been believed to play important roles in processes of the creative design thinking(Goldschmidt, 1991; Schon and Wiggins, 1992; Goel, 1995; Suwa et al., 2000; Verstijnen et al., 1998; Elsas van and Vergeest, 1998). Recently, there are many researches on inspiration of the design creativity by digital media(Liu, 2001; Sasada, 1999). The digital media have been used to apply the creative activities and that caused the occurrenssce of unexpected discovery in early design processes(Gero and Maher, 1993; Mitchell, 1993; Schmitt, 1994; Gero, 1996, 2000; Coyne and Subrahmanian, 1993; Boden, 1998; Huang, 2001; Chen, 2001; Manolya et al. 1998; Verstijinen et al., 1998; Lynn, 2001). In addition, there are many applications by combination of conventional and digital media in the sketches conceptual process. However, previous works only discussed that the individual media were related to the design creativity. The cognitive research about the application of conceptual sketches design by integrating both conventional and digital media simultaneously is absent.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ea96
authors	Hacfoort, Eek J. and Veldhuisen, Jan K.
year	1992
title	A Building Design and Evaluation System
source	New York: John Wiley & Sons, 1992. pp. 195-211 : ill. table. includes bibliography
summary	Within the field of architectural design there is a growing awareness of imbalance among the professionalism, the experience, and the creativity of the designers' response to the up-to-date requirements of all parties interested in the design process. The building design and evaluating system COSMOS makes it possible for various participants to work within their own domain, so that separated but coordinated work can be done. This system is meant to organize the initial stage of the design process, where user-defined functions, geometry, type of construction, and building materials are decided. It offers a tool to design a building to calculate a number of effects and for managing the information necessary to evaluate the design decisions. The system is provided with data and sets of parameters for describing the conditions, along with their properties, of the main building functions of a selection of well-known building types. The architectural design is conceptualized as being a hierarchy of spatial units, ranking from building blocks down to specific rooms or spaces. The concept of zoning is used as a means of calculating and directly evaluating the structure of the design without working out the details. A distinction is made between internal and external calculations and evaluations during the initial design process. During design on screen, an estimation can be recorded of building costs, energy costs, acoustics, lighting, construction, and utility. Furthermore, the design can be exported to a design application program, in this case AutoCAD, to make and show drawings in more detail. Through the medium of a database, external calculation and evaluation of building costs, life-cycle costs, energy costs, interior climate, acoustics, lighting, construction, and utility are possible in much more advanced application programs
keywords	evaluation, applications, integration, architecture, design, construction, building, energy, cost, lighting, acoustics, performance
series	CADline
last changed	2003/06/02 13:58

_id	1963
authors	Tweed, Chris and Woolley, Tom
year	1992
title	USER PARTICIPATION IN DESIGN: TECHNIQUES FOR DIALOGUE
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part B, pp. 17-24
summary	Many projects in which users participate in the design process are merely examples of professionals communicating their ideas to their clients. Conventional computer systems can be powerful tools for helping designers to present design informations to lay audiences, but when combined with computer modelling and simulation, they create opportunities for users to construct their own sequences of images and thus explore designs from their own viewpoint. Building on extensive experience of traditional methods of user participation, this paper explores the use of narratives to create dialogues between users, designers and computers. The concept of "design stories" as a route to fully shared creativity is explained. The paper also argues that this approach is needed to bring into focus design issues that cannot be described or resolved by computer modelling alone.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:41

_id	cbed
authors	Yakubu, G.S.
year	1994
title	Maximising the Benefits of CAD Systems in Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u8n
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 228
summary	The positive impact of Computer Aided Design (CAD) in professional architectural practice has been in focus in recent times but relatively little has been written on its significance in the education of the contemporary architect. It is common knowledge that the profession of architecture is currently undergoing enormous strains as it battles to keep abreast of trends and developments in a period of series of rapid advancement in science, technology and management (RIBA, 1992). Whilst attempts are being made to redress the shortcomings of the profession in the above context, the requirements for architectural education are yet to forge a coherent strategy for the implementation of CAD/IT in the curriculum of schools of architecture. In almost every other field, including engineering, medicine and the humanities, computing application to problem-solving and decision-making is seen as a way forward as we move into 21st century. Architectural education must integrate CAD/IT into the teaching of core modules that give the architect distinctive competence: studio design. That is one of the best ways of doing justice to the education of the architect of today and the future. Some approaches to the teaching of CAD in schools of architecture have been touched upon in the recent past. Building upon this background as well as an understanding of the nature of design teaching/learning, this paper examines ways of maximising the benefits of CAD systems in architectural education and of bringing computer aided designing into the studio not only to enhance design thinking and creativity but also to support interactive processes. In order to maximise or optimise any function, one approach is to use the hard systems methodology which utilises analytic, analogic and iconic models to show the effect of those factors which are significant for the purposes being considered. The other approach is to use the soft systems methodology in which the analysis encompasses the concept of a human activity system as a means of improving a situation. The use of soft systems methodology is considered more appropriate for dealing with the problem of design which is characterised by a flux of interacting events and ideas that unroll through time. The paper concludes that the main impediment to maximising the benefits of CAD systems in architectural education is not only the inappropriate definition of the objectives for the implementation of CAD education but also that the control subsystems are usually ill-structured and relatively poorly defined. Schools must attempt to define a coherent and consistent policy on the use of CAD systems as an integral part of studio design and evolve an in-house strategic and operational controls that enable the set objectives to be met. Furthermore, it is necessary to support the high level of productivity from CAD systems with a more efficient management system, especially in dealing with communication, data sharing via relational database, co-ordination and integration. Finally, the use of soft systems methodology is recommended as the way forward to optimising CAD systems in design education as it would provide continuous improvements while maintaining their productive value.
series	eCAADe
last changed	2022/06/07 07:50

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	3ff5
authors	Abbo, I.A., La Scalea, L., Otero, E. and Castaneda, L.
year	1992
title	Full-Scale Simulations as Tool for Developing Spatial Design Ability
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part C, pp. 7-10
summary	Spatial Design Ability has been defined as the capability to anticipate effects (psychological impressions on potential observers or users) produced by mental manipulation of elements of architectural or urban spaces. This ability, of great importance in choosing the appropriate option during the design process, is not specifically developed in schools of architecture and is partially obtained as a by-product of drawing, designing or architectural criticism. We use our Laboratory as a tool to present spaces to people so that they can evaluate them. By means of a series of exercises, students confront their anticipations with the psychological impressions produced in other people. For this occasion, we present an experience in which students had to propose a space for an exhibition hag in which architectural projects (student thesis) were to be shown. Following the Spatial Design Ability Development Model which we have been using for several years, students first get acquainted with the use of evaluation instruments for psychological impressions as well as with research methodology. In this case, due to the short period available, we reduced research to investigate the effects produced by the manipulation of only 2 independents variables: students manipulated first the form of the roof, walls and interiors elements, secondly, color and texture of those elements. They evaluated spatial quality, character and the other psychological impressions that manipulations produced in people. They used three dimensional scale models 1/10 and 1/1.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
email
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	6208
authors	Abou-Jaoude, Georges
year	1992
title	To Master a Tool
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part B, p. 15
summary	The tool here is the computer or to be precise, a unit that includes the computer, the peripherals and the software needed to fulfill a task. These tools are getting very sophisticated and user interfaces extremly friendly, therefore it is very easy to become the slave of such electronic tools and reach self satisfaction with strait forward results and attractive images. In order to master and not to become slaves of sophisticated tools, a very solid knowledge of related fields or domains of application becomes necessary. In the case of this seminar, full scale modelling, is a way to understand the relation between a mental model and it's full-scale modelling, it is a way of communicating what is in a designers mind. Computers and design programs can have the same goal, rather than chosing one method or the other let us try to say how important it is today to complement designing with computer with other means and media such as full scale modelling, and what computer modelling and simulation can bring to full scale modelling or other means.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	acadia06_455
id	acadia06_455
authors	Ambach, Barbara
year	2006
title	Eve’s Four Faces interactive surface configurations
doi	https://doi.org/10.52842/conf.acadia.2006.455
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] pp. 455-460
summary	Eve’s Four Faces consists of a series of digitally animated and interactive surfaces. Their content and structure are derived from a collection of sources outside the conventional boundaries of architectural research, namely psychology and the broader spectrum of arts and culture.The investigation stems from a psychological study documenting the attributes and social relationships of four distinct personality prototypes: the Individuated, the Traditional, the Conflicted, and the Assured (York and John 1992). For the purposes of this investigation, all four prototypes are assumed to be inherent, to certain degrees, in each individual. However, the propensity towards one of the prototypes forms the basis for each individual’s “personality structure.” The attributes, social implications and prospects for habitation have been translated into animations and surfaces operating within A House for Eve’s Four Faces. The presentation illustrates the potential for constructed surfaces to be configured and transformed interactively, responding to the needs and qualities associated with each prototype. The intention is to study the effects of each configuration and how each configuration may be therapeutic in supporting, challenging or altering one’s personality as it oscillates and shifts through the four prototypical conditions.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2006_040
id	2006_040
authors	Ambach, Barbara
year	2006
title	Eve’s Four Faces-Interactive surface configurations
doi	https://doi.org/10.52842/conf.ecaade.2006.040
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 40-44
summary	Eve’s Four Faces consists of a series of digitally animated and interactive surfaces. Their content and structure are derived from a collection of sources outside the conventional boundaries of architectural research, namely psychology and the broader spectrum of arts and culture. The investigation stems from a psychological study documenting the attributes and social relationships of four distinct personality prototypes; the “Individuated”, the “Traditional”, the “Conflicted” and the “Assured”. (York and John, 1992) For the purposes of this investigation, all four prototypes are assumed to be inherent, to certain degrees, in each individual; however, the propensity towards one of the prototypes forms the basis for each individual’s “personality structure”. The attributes, social implications and prospects for habitation have been translated into animations and surfaces operating within A House for Eve’s Four Faces. The presentation illustrates the potential for constructed surfaces to be configured and transformed interactively, responding to the needs and qualities associated with each prototype. The intention is to study the effects of each configuration and how it may be therapeutic in supporting, challenging or altering one’s personality as it oscillates and shifts through the four prototypical conditions.
keywords	interaction; digital; environments; psychology; prototypes
series	eCAADe
type	normal paper
last changed	2022/06/07 07:54

_id	4704
authors	Amirante, I., Rinaldi, S. and Muzzillo, F.
year	1992
title	A Tutorial Experiment Concerning Dampness Diagnosis Supported by an Expert System
doi	https://doi.org/10.52842/conf.ecaade.1992.159
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 159-172
summary	(A) The teaching of Technology of Building Rehabilitation in Italian Universities - (B) Experimental course of technological rehabilitation with computer tools - (C) Synthesis of technological approach - (D) Dampness diagnostic process using the Expert System - (E) Primary consideration on tutorial experience - (F) Bibliography
series	eCAADe
last changed	2022/06/07 07:54

_id	ce98
authors	Anderson, Lee
year	1992
title	Virtual Graffiti Three-Dimensional Paint Tools for Conceptual Modeling in Upfront
doi	https://doi.org/10.52842/conf.acadia.1992.127
source	Mission - Method - Madness [ACADIA Conference Proceedings / ISBN 1-880250-01-2] 1992, pp. 127-133
summary	This chapter describes several limitations present in current 3-D programs used for conceptual design and then introduces a new threedimensional paint tool, as implemented in a beta version of Alias Upfront, that attempts to deal with some of those limitations.
series	ACADIA
last changed	2022/06/07 07:54

_id	735a
authors	Anh, Tran Hoai
year	1992
title	FULL-SCALE EXPERIMENT ON KITCHEN FUNCTION IN HANOI
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part A, pp. 19-30
summary	This study is a part of a licentiate thesis on "Functional kitchen for the Vietnamese cooking way"at the Department of Architecture and Development studies, Lund University. The issues it is dealing with are: (1) Inadequacy of kitchen design in the apartment buildings in Hanoi, where the kitchen is often designed as a mere cooking place - other parts of the food making process are not given any attention. (2) Lack of standard dimensional and planning criteria for functional kitchen which can serve as bases for kitchen design. // The thesis aims at finding out indicators on functional spatial requirements for kitchen, which can serve as guide-line for designing functional kitchen for Hanoi. One of the main propositions in the thesis is that functional kitchens for Hanoi should be organised to permit the culinary activities done according to the Vietnamese urban culinary practice. This is based on the concept that the culinary activity is an expression Of culture, thus the practice of preparing meal in the present context of the urban households in Hanoi has an established pattern, method which demand a suitable area and arrangement in the kitchen. This pattern and cooking method should make up the functional requirement for kitchen in Hanoi, and be taken in to account if functional kitchen designing is to be achieved. In the context of the space-limited apartment building of Hanoi, special focus is given to find out indicators on the minimum functional spatial requirements of the kitchen works.
keywords	Full-scale Modeling, Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2004/05/04 15:29

_id	7291
authors	Arvesen, Liv
year	1992
title	Measures and the Unmeasurable
source	Proceedings of the 4rd European Full-Scale Modelling Conference / Lausanne (Switzerland) 9-12 September 1992, Part C, pp. 11-16
summary	Nowhere do we ever find a similar environment as the one related to the tea ceremony. We may learn from the teamasters as we may learn from our masters of architecture. Directly and indirectly we are influenced by our surroundings which have been proved by research and which we ourselves experience in our daily life. The full scale experiments have been made on this subject. Related to the nervous mind the experiments were concentrated of form expressing safety and peace.
keywords	Full-scale Modeling,Model Simulation, Real Environments
series	other
more	http://info.tuwien.ac.at/efa
last changed	2003/08/25 10:12

_id	0293
authors	Asanowicz, A., Jakimowicz, A., Koperski, A. And Sawicki, B.
year	1992
title	Education Center of Computer Aided Design: Technical University of Bialystok, Poland - Hopes, Possibilities, Limitations.
doi	https://doi.org/10.52842/conf.ecaade.1992.267
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 267-272
summary	This paper describes a Project of Professional Computer Aided Design Education in Bialystock (Poland).
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6270
authors	Atac, Ibrahim
year	1992
title	CAAD Education and Post-Graduate Opportunities (At Mimar Sinan University)
doi	https://doi.org/10.52842/conf.ecaade.1992.273
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 273-278
summary	This paper addresses new design teaching strategies at an important and traditional university in Istanbul, founded as the Academy of Fine Arts 110 years ago. It will include a short review of design education before the Academy changed into a university, and a description of the present situation with regard to computers. Nearly two years ago, CAAD education was introduced as an elective subject. The students show great interest in CAD; most Turkish architects now work with computers and CAAD graphics, although automated architecture has not yet become firmly established. The aim of the CAD studio is also to establish an institute which will allow university staff to develop their own programs and to pursue scientific research in this field. On the basis of rising requests from researchers and students, rapid and healthy developments should be made to keep up with new technologies. As the improvement of the specialized involvement with CAD is the future target, MSU is attempting to broaden its horizon by including design methodologies of the last decades.
series	eCAADe
last changed	2022/06/07 07:54

_id	10b7
authors	Aukstakalnis, Steve and Blatner, David
year	1992
title	Silicon Mirage: The Art and Science of Virtual Reality
source	Peachpit Press
summary	An introduction to virtual reality covers every aspect of the revolutionary new technology and its many possible applications, from computer games to air traffic control. Original. National ad/promo.
series	other
last changed	2003/04/23 15:14

_id	60e7
authors	Bailey, Rohan
year	2000
title	The Intelligent Sketch: Developing a Conceptual Model for a Digital Design Assistant
doi	https://doi.org/10.52842/conf.acadia.2000.137
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 137-145
summary	The computer is a relatively new tool in the practice of Architecture. Since its introduction, there has been a desire amongst designers to use this new tool quite early in the design process. However, contrary to this desire, most Architects today use pen and paper in the very early stages of design to sketch. Architects solve problems by thinking visually. One of the most important tools that the Architect has at his disposal in the design process is the hand sketch. This iterative way of testing ideas and informing the design process with images fundamentally directs and aids the architect’s decision making. It has been said (Schön and Wiggins 1992) that sketching is about the reflective conversation designers have with images and ideas conveyed by the act of drawing. It is highly dependent on feedback. This “conversation” is an area worthy of investigation. Understanding this “conversation” is significant to understanding how we might apply the computer to enhance the designer’s ability to capture, manipulate and reflect on ideas during conceptual design. This paper discusses sketching and its relation to design thinking. It explores the conversations that designers engage in with the media they use. This is done through the explanation of a protocol analysis method. Protocol analysis used in the field of psychology, has been used extensively by Eastman et al (starting in the early 70s) as a method to elicit information about design thinking. In the pilot experiment described in this paper, two persons are used. One plays the role of the “hand” while the other is the “mind”- the two elements that are involved in the design “conversation”. This variation on classical protocol analysis sets out to discover how “intelligent” the hand should be to enhance design by reflection. The paper describes the procedures entailed in the pilot experiment and the resulting data. The paper then concludes by discussing future intentions for research and the far reaching possibilities for use of the computer in architectural studio teaching (as teaching aids) as well as a digital design assistant in conceptual design.
keywords	CAAD, Sketching, Protocol Analysis, Design Thinking, Design Education
series	ACADIA
last changed	2022/06/07 07:54

For more results click below: