CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 255

_id c7c1
authors Glennie, William L.
year 1993
title The Future of CAAD Education
source [eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi https://doi.org/10.52842/conf.ecaade.1993.x.r9o
summary The field of Computer-Aided Architectural Design (CAAD) is composed of two main threads of development, Academic and Professional, and can be described in three decades, which correspond roughly with three generations of computer systems. This paper presents a brief description of the entire period of school- and practice-based research and development on the applications of computers in Architectural design, and shows how these efforts have and have not been relevant to students' future experiences. Educators must take a fresh look at their current courses and research programs to make sure that they are relevant in the rapidly changing world of professional practice. With limited human and financial resources at most institutions, it is critical to make the best possible choices for the immediate and long-term benefit of today's students. While it is not appropriate for Schools of Architecture to operate strictly at the behest of the profession, we must prepare our students for the world in which they will practice. Therefore, I believe that it is important for the faculty at each School to consider the following questions: (-) Are our students prepared to enter realistic positions as soon as they graduate? (-) Do they have the background necessary to use computers effectively in the future? (-) Do our research efforts have results that designers are likely to use today or any time soon to make better buildings or to make buildings better?

series eCAADe
email
last changed 2022/06/07 07:50

_id e9f1
authors Alaimo, G., Pellitteri, G. and Scianna, A.
year 1993
title A Tool for Typological Analysis
source [eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi https://doi.org/10.52842/conf.ecaade.1993.x.q0g
summary Any design problem is faced drawing from the architect's knowledge both case knowledge and general knowledge. One type of the latter is abstracted from a multiplicity of cases of which the common features are recognised in such a way as to single out a prototype representing in the best way a class of architectural objects. If applied to a set of residential buildings and to the flats in them the analysis is typological and it is one of the fundamental ways of acquiring general knowledge to be used to face design problems. The tool we present is aimed at such a type of analysis and is based on the idea that it possible to acquire qualitative knowledge through the statistical analysis of measurable characteristics of the examined architectural objects. It has been tested by applying it to the typological analysis of a set of flats of illegal buildings in Sicily. The procedure is organised in two main phases. The first one consists in a series of elaborations performed during the reading of architectural organism; the second one consists in a series of statistical analyses on the results (characteristic variables) of the first.
series eCAADe
last changed 2022/06/07 07:50

_id a927
authors Amirante, Isabella and Bosco, Antonio
year 1995
title Hypertext Between Research and Teaching: An Experience in a Didactic Building Technology Laboratory
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 3-12
doi https://doi.org/10.52842/conf.ecaade.1995.003
summary IPER (hypertext for the knowledge of building patrimony) is the result of a research developed with C.N.R. (National Research Institute). The aim of IPER is to provide the knowledge, the description and the management of one or more historical buildings for public or private institutions. IPER allowed us to improve our methodology of building analysis, covering various disciplinary fields, in two different systems. (1.) the first one, synthetic and suitable for a group of historical buildings, (2.) the second one, complex and particularly made for monumental buildings. // This experience is related to the new regulation of teaching architecture in Italy made in 1993. The main novelty is the introduction of the laboratories with the contemporary presence of two or three teachers of different disciplines, working together with the students on the same project with different approaches. This opportunity allowed us to introduce the "knowledge engineer" as a teacher in the laboratory of building technology. IPER is given to the students with the aim of experimenting and solving the theoretical and practical difficulties that students of different years may encounter in the knowledge and representation of buildings and in the organisation of all the data from the case study.
series eCAADe
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_1.htm
last changed 2022/06/07 07:54

_id 86dc
authors Aouad, G., and Price, A.D.F.
year 1993
title An integrated system to aid the planning of concrete structures: introducing the system
source The Int. Journal of Construction IT1(2), pp.1-14
summary This paper reports on the development at Loughborough University of a CAD-based integrated model to aid the planning of in-situ concrete structures. The system development started after a review of the planning models currently available and after a detailed questionnaire survey undertaken amongst the top UK and US contractors on the current status of planning techniques and information technology. The main aim of this system is to automate the planning process of in-situ concrete structures using data generated by CAD systems. So far, the integration of a CAD system (AutoCAD 10) and a computerized scheduling system (Artemis 2000) has been achieved on a typical IBM-PC. This enables the generation of network plans using AutoCAD which are then automatically transferred to the Artemis system for time and cost analyses.Traditionally, construction planners are faced with many conventional drawings and documents which are used to re-extract information relevant to their planning processes. Such an approach can be very inefficient as it involves data double-handling and is often error prone. In addition, current computerized construction planning applications are little more than the automation of manual formulations of plans. For example, data are fed into the planning system and computations are performed using either CPM (Critical Path Method) or PERT (Programme Evaluation and Review Technique). However, data relating to the planning process such as activity lists, resources requirements and durations are not automatically generated within the system. It would thus seem logical to devise a CAD-based integrated planning model which accepts data in its electronic format and involves some integration of the traditional planning approach. This paper introduces the proposed CAD-based integrated planning model and describes its different components. In addition, it discusses the system functional specifications and summarizes the main benefits and limitations of such a model.
series journal paper
last changed 2003/05/15 21:45

_id ae19
authors Armstrong, Richard
year 1993
title On The Technical Features Of The Endoscope - OES Modelscope as a Case in Point
source Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 153-156
summary The Olympus Optical Company of Japan was formed in 1919, with the introduction of the first generation single lens reflects camera, and soon after with the first microscope. Since that time, the organisation has developed and is now split into three main divisions: manufacturing and supplying cameras, microscopes and endoscopes. Other smaller specialist divisions exist suppling such products as dictaphones. Perhaps, rather surprisingly, the endoscope division is the largest part of the organisation. Through a world-wide organisation of four main business centers, Olympus Industrial, the name given to the industrial endoscope division, provides service and support to its customers. Each of the main business centers operates through agents and distributors. There are many different industries which gain the benefits of saved time and money provided by using endoscopes. To meet the needs of so many varied industries, there is a need to have a wide range of equipment. This includes light sources, to provide illumination, rigid borescopes, flexible fiberscopes, if views around corners are needed, and the new technology videoscopes. These instruments use the latest CCD technology with a small chip situated in the distal end of the scope, instead of fiberoptic image bundles used in fiberscopes.

keywords Architectural Endoscopy
series EAEA
more http://info.tuwien.ac.at/eaea/
last changed 2005/09/09 10:43

_id 4c30
authors Aura, Seppo
year 1993
title Episode as a Unit of Analysis of Movement
source Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 53-66
summary Everybody who has read his Gordon Cullen or his Edmund H. Bacon knows that movement has long been recognized as a factor in environmental planning in many ways. For example, in the traditional Japanese promenade garden the importance of movement has always been appreciated. The promenader gains an intense experience of the succession, variation and rhythm of the surrounding scene. The spaces and paths lead him from one stage to another. The spatial structure of the Japanese promenade garden, as well as of traditional Japanese architecture in general, is joined most intensively to time and motion. The environment is in relation to the flow of change in many sense, both concretely and existentially. Taking an example of western urban environment. Here perhaps the most marked sequential spaces are to be found in small medieval, mediterranean towns. Thanks to their organic growth, narrow and winding streets and the emphasis on public squares, most of them provide exciting experiences if the observer is only interested in seeing the townscape from the point of view of movement. There are also examples of this kind of environment in Finland. In old wooden towns like Porvoo and Rauma one can still find varied and rhythmic streetscapes and networks of streets and squares, together with a human scale and an almost timeless atmosphere. One could say that such an opportunity to experience spaces sequentially, or as serial visions, is an important dimension for us, especially as pedestrians. And as Gordon Cullen has shown there is in any urban environment much scope to heighten this experience. For example, by creating a sense of ’entering in’ some place, ’leaving for’, ’moving towards’, ’turning into’, ’walking through’ some place or ’following on’ the flow of spaces. Or, as Edmund H. Bacon has said, the departure point of good town planning should be that the successive towns spaces give rise to a flow of harmonic experiences: present experiences merge with earlier ones and become a step towards a future. Or, again in the words of Donald Appleyard, Kevin Lynch and John R. Myer: “The experience of a city is basically of a moving view, and this is the view we must understand if we wish to reform the look of our cities”.
keywords Architectural Endoscopy
series EAEA
more http://info.tuwien.ac.at/eaea/
last changed 2005/09/09 10:43

_id 50ce
authors Baker, R.
year 1993
title Designing the Future: The Computer Transformation of Reality
source Thames and Hudson, Hong Kong
summary A coffee table book on computer applications? Well, yes, because it does deal largely with matters of graphic design in architecture, fashion and textiles, painting, and photography; but it also has items which might be of interest in its sections on digital publication, typography, and electronic communication in general. It also seeks to discuss the way in which these applications may force us to change the way we think. Robin Baker writes in an unfortunately stiff and abstract manner about the impact computer programmes have had on the world of art and design, but the graphic images and extended picture captions help to keep the reader awake - even though the main text sometimes disappears for two or three double page spreads on end. There are also smatterings of pretentious art-world-speak about 'solving certain spatial problems' (in the design of curtain fabrics or teapots) and the introduction (inevitable?) of new jargon: 'shape grammar'(a list of so-called shape 'rules'), 'repurposing' (putting somebody else's work to new use) and 'genetic algorithms' (sculptural designs based on re-processed organic shapes - most of which look like stomach tumours). In his favour, Baker very generously credits students and commercial designers who have produced the effects he describes and illustrates so well. For writers, he sketches in the possibilities of Hypertext and Hypermedia and points to the future of Hyper publishing which he (and Rupert Murdoch)believes will be with us before the end of the century. He seems to have a good oversight of what is possible and practicable - though one wonders how up-to-date the view is when his book may have begun its life anything up to three years ago. He usefully points out that much new technology exists in or drags along with it the forms of earlier periods - so that in an age of electronic communication we still have printed books as a dominant cultural form. Maybe this is as it should be - but Baker makes a persuasive case for the claim that All This is Going to Change.
series other
last changed 2003/04/23 15:14

_id cf2011_p170
id cf2011_p170
authors Barros, Mário; Duarte José, Chaparro Bruno
year 2011
title Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series CAAD Futures
email
last changed 2012/02/11 19:21

_id cb25
authors Benedikt, M.
year 1993
title Cityspace, Cyberspace, and The Spatiology of Information
source Boyer,C. & Gandelsonas.,M. The New Urbanism Princeton University Press
summary The concept of space has been critical to architectural theory for over seventy years now. It remains however, an elusive idea, on the one hand meaning and referring to everything, on the other hand meaning and referring to nothing. Why? Is it because "space," like "time," is a category outside of which thinking itself seems to be impossible, just as Kant asserted? Is it simply one of those irreducible, universal without which the world as such would cease to in any sense, let alone be of, or perceived by, sentient beings givens be thought Certainly to suggest that space itself is an active, causative agent of some sort risks opening that discussion up to universalizing of the most extreme and vacuous kind. For if I am not to be a dualist, positing a separate, a-spatial and a-temporal realm for thought and feeling, then what in the real world, I can easily ask, occupies neither space nor time? What is it that cannot be reduced, be analyzed, or be spoken of finally in the language of position, duration, connection, inclusion, transformation, and so forth? Nothing. If we wish to reach deeply into the "nature" of "space itself" then, I believe we must allow into it, as it were, of some sort: not the aether of Nineteenth century science perhaps, but a registering, tracing, questioning, remembering substance, spread as thinly as we can imagine but present nonetheless, and definitive of versus because of how it pools, how it vibrates, how it scatters difference, a substance here there difference.
series other
last changed 2003/11/21 15:16

_id ddss9219
id ddss9219
authors Bourdakis, V. and Fellows, R.F.
year 1993
title A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series DDSS
last changed 2003/11/21 15:16

_id 0e89
authors Bradford, J.W., Cheng, N. and Kvan, Thomas
year 1994
title Virtual Design Studios
source The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 163-167
doi https://doi.org/10.52842/conf.ecaade.1994.163
summary Beginning in 1993, small groups of students of architectural design at different institutions around the world participated in collaborative design projects using a variety of tools, including CAD, Internet and teleconferencing. This programme, known as the "Virtual Design Studio" (VDS), allows students to work collectively with colleagues from different cultures and climates who are thousands of kilometres and in different time zones. Most recently, in February 1994, four institutions in N. America, one in Europe, and one in S E Asia participated in VDS’94. This paper explains the operation of the VDS and explores the future of the VDS as a potential tool for architectural design education. In particular, we review what we have learned in employing computer tools to extend the teaching in design studios into a "virtual" experience.
series eCAADe
type normal paper
email
last changed 2022/06/07 07:54

_id c372
authors Calvert, T., Bruderlin, A., Mah, S., Schiphorst, T. and Welman, C.
year 1993
title The Evolution of an Interface for Choreographers Evolving Design
source Proceedings of ACM INTERCHI'93 Conference on Human Factors in Computing Systems 1993 pp. 115-122
summary This paper describes the evolution of the interface to Life Forms, a compositional tool for the creation of dance choreography, and highlights some of the important lessons we have learned during a six year design and implementation period. The lessons learned can be grouped into two categories: 1) Process, and 2) Architecture of the Interface. Our goal in developing a tool for choreography has been to provide computer-based creative design support for the conception and development of dance. The evolution was driven by feedback from the choreographers and users who were members of the development team, combined with our knowledge of current thinking on design and composition. Although the interface evolved in a relatively unconstrained way, the resulting system has many of the features that theoretical discussion in human interface design has projected as necessary. The Life Forms interface has evolved incrementally with one major discontinuity where adoption of a new compositional primitive required a completely new version. The choreography and composition of a dance is a complex synthesis task which has much in common with design. Thus, the lessons learned here are applicable to the development of interfaces to such applications as computer aided design.
keywords Composition; Design; User Interface; Dance; Complexity; Choreography; Human Animation
series other
last changed 2002/07/07 16:01

_id 88c5
authors Caturano, U.
year 1993
title A Proposal of Iconic Map on Computer Aided Architectural Design: 3DIMCAAD
source [eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi https://doi.org/10.52842/conf.ecaade.1993.x.g9p
summary During the development of my graduation thesis I had to propose a subdivision of informatics technologies for architectural design into several research fields, each of them characterized by specific aims. This kind of subdivision was originally configured as an orientation tool inside the wide CAAD discipline, and only in a second time it took the features of a complete organization layout in which it is understandable not only the position of each single discipline in comparison with the others but, above all, the connections and interactions between them. The model, obtained as the result of many handlings but undefined yet, has been named 3DIMCaad (3 Dimensional Iconic Map on Computer Aided Architectural Design) and, in according to an initial hypothesis it could be regarded as a map of the sectors pointed out by my proposal, in fact, it is a iconic model of the connections and differences between the informatic main topics that I analysed. Every main topic is represented by a spheric nucleus linked to the others by a connection line (the ''pipe''), the dimension of which, quite generous, makes the observer understand the numerous interactions and exchange presents if two main topics are linked.

series eCAADe
last changed 2022/06/07 07:50

_id cad5
authors Coyne, R.F., Flemming, U., Piela, P. and Woodbury, R.
year 1993
title Behavior Modeling in Design System Development
source CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 335-354
summary We describe the development approach for a software environment to support the early phases in building design called SEED. The combination of capabilities offered by SEED to designers is novel and includes the integrated handling of solution prototypes. We give the reasons for using an object-oriented software engineering approach in the development of the system, which starts with a comprehensive behavioral model of the system from the user's perspective based on actors and use cases. We illustrate results from the first development phase and sketch the next phases. At the time of the CAAD Futures '93 conference, we will be able to report our experience in developing a first system prototype and to demonstrate the prototype.
keywords Object-Oriented Software Engineering, Integrated Design Systems, Architectural Programming, Schematic Layout Design
series CAAD Futures
email
last changed 2003/02/26 17:24

_id ddss9205
id ddss9205
authors De Scheemaker. A.
year 1993
title Towards an integrated facility management system for management and use of government buildings
source Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary The Government Building Agency in the Netherlands is developing an integrated facility management system for two of its departments. Applications are already developed to support a number of day-to-day facility management activities on an operational level. Research is now being carried out to develop a management control system to better plan and control housing and material resources.
series DDSS
last changed 2003/08/07 16:36

_id eaea2005_000
id eaea2005_000
authors Dechène, Sigrun und Manfred Walz (Eds.)
year 2006
title Motion, E-Motion and Urban Space
source Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4, 260 p.
summary Simulating the development and the image of architecture and urban design means to show how the environment of the future and the living conditions could develop. At the same time it is part of our task to explain our work to local people and to the public and to passion skills in methods, instruments and knowledge in planning to the next generation of architects, planners and last but not least to discuss and to renew them once more for ourselves. Our aim was also to reflect what we have done since starting the look through the key-hole of endoscopy. Meanwhile this look has been completed since the beginnings in 1993 much more by computer and monitor. It is not the question to take the endoscope or the computer as a methodical and instrumental approach. Nowadays we normally decide to take the endoscope and the computer. In preparing the conference and the workshop we thought that this should now also be the moment not only to inform each other and the participants on methods, tools and best practices in simulating and designing the environment but also to focus on the social and human consequences of perception, movement and use the present urban spaces and the urban space in future. So we proposed the theme “MOTION, E-MOTION and URBAN SPACE” and we invited a scientific expert in experimental psychology to give us some serious reflections and one or another hint on our research themes and methods. The contributions and discussions in the conference showed that the proposal has not only been accepted but has also been completed and enriched especially concerning the theme urban space, it’s processes of usage and it‘s atmosphere. Also in the themes of endoscopy and the research on modelling urban spaces and architecture, meanwhile nearly “traditional” ones, remarkable results were presented and discussed. A very important point of contributions and the following discussions was how to present our subjects to the interested public and to improve our own internal exchange. An object could be to enforce the research tasks in researching together even more.
series EAEA
email
more http://info.tuwien.ac.at/eaea
last changed 2008/04/29 20:46

_id 8b38
authors Do, Ellen Yi-Luen and Gross, Mark D.
year 1998
title The Sundance Lab- "Design Systems of the Future"
source ACADIA Quarterly, vol. 17, no. 4, pp. 8-10
doi https://doi.org/10.52842/conf.acadia.1998.008
summary The last thirty years have seen the development of powerful new tools for architects and planners: CAD, 3D modeling, digital imaging, geographic information systems, and real time animated walkthroughs. That’s just the beginning. Based on our experience with CAD tools, analysis of design practice, and an understanding of computer hardware and software, we’re out to invent the next generation of tools. We think architects should be shakers and makers, not just consumers, of computer aided design. We started the Sundance Lab (for Computing in Design and Planning) in 1993 with a few people and machines. We’ve grown to more than a dozen people (mostly undergraduate students) and a diverse interdisciplinary array of projects. We’ve worked with architects and planners, anthropologists, civil engineers, geographers, computer scientists, and electrical engineers. Our work is about the built environment: its physical form and various information involved in making and inhabiting places. We cover a wide range of topics – from design information management to virtual space, from sketch recognition to design rationale capture, to communication between designer and computer. All start from the position that design is a knowledge based and information rich activity. Explicit representations of design information (knowledge, rationale, and rules) enables us to engage in more intelligent dialogues about design. The following describes some of our projects under various rubrics.
series ACADIA
email
last changed 2022/06/07 07:55

_id 6c55
authors Dosti, P., Linzer, H. Martens, B. and Voigt, A.
year 1993
title Multimedia for Environmental Simulation - Framework of Research
source [eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi https://doi.org/10.52842/conf.ecaade.1993.x.e4g
summary Nature as complete entity having existed before us, having produced us, of which we are a part of and which reaches far beyond us and our knowledge stands both for productivity and product, for stones, earth, water, air, plants, animals, human beings, for energy as such. On account of his activity and his intellectual powers and faculties the human being represents the center of this interrelation comprising his vital space, being perceived by him either consciously or unconsciously, the structure and formation of which he changes, which in turn, however, significantly codetermines his behavior and also his development. Spatial effect analysis and spatial impact analysis take the cross- linked interrelations of nature into account and thus the correlated diverse interactions by means of integral representation, determine the direct and indirect as well as the immediate and mediate decisions as to space and furnish us with decision-conclusions by means of modifications. Based on the all-in-all outlook encompassing nature- mankind-space spatial impact also means in particular compatibility within systems giving due regard to the factor time. The following topics are treated within the framework of research: (1.) Elaboration of a methodical framework regarding research and development in the field of multimedia-implementation for environmental planning. (2.) Preparative work concerning implementation areas of multimedia focussing on urban & regional planning and architecture. (3.) Planning process and planning levels,furthermore in the fields of information and decision process and accompanying verification. (4.) Optimizing interaction of multimedia and environmental simulation. (5.) Definition of research- and development-requirements as far as subject-specific and EDP-technical aspects are concerned. (6.) Structurizing of projects regarding realization of framework of research.

series eCAADe
email
more http://www.tuwien.ac.at/
last changed 2022/06/07 07:50

_id 68c8
authors Flemming, U., Coyne, R. and Fenves, S. (et al.)
year 1994
title SEED: A Software Environment to Support the Early Phases in Building Design
source Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series other
email
last changed 2003/04/23 15:14

_id 4203
authors Fraser, Michael
year 1993
title Boundary Representation in Practice
source Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 173-185
doi https://doi.org/10.52842/conf.acadia.1993.173
summary There is an essential contradiction between the making of buildings or built environments in a threedimensional modeler and the graphic control of this process. Three-dimensional modeling is a constructive activity, in which solids are assembled as they would be in an actual structure; it benefits the designer. Presentation and documentation, on the other hand, are prescriptive activities that direct some of the construction and all the visualization and criticism of the proposal; they benefit the user and builder.

A building while being designed can be visualized and criticized from its solid model, and the model can take a variety of forms depending on its part): computer-based, drawn in orthographic or perspective projection, constructed of cardboard or wood, or described narratively by means of text, programmatic data, performance model or animation. However, practicing architecture is the process of recording and communicating the decision making process and the contractual obligations that result. In actual practice, in contrast to the designer directed ideal, more participants are brought in sooner at the beginning of a project and with more publicity, which in turn means keeping more, not fewer, records. As the profession evolves, records of the string of design decisions will become more automated, more carefully structured and more retrievable. More buildings will be "tracked" and exposed to review in this way because public environmental sensitivity will improve. The communication between a single designer and his own thoughts will become less and less important.

series ACADIA
last changed 2022/06/07 07:50

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 12HOMELOGIN (you are user _anon_910227 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002