Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 250

Reformat results as: short short into frame detailed detailed into frame

_id	3653
authors	Alshawi, M. and Budeiri, M.J.
year	1993
title	An Integrated approach for 3D simulation of construction sequence
source	The Int. Journal of Construction IT 1(2), pp. 35-46
summary	In order to eliminate design-related problems and to ease planning difficulties, a new integrated approach is required to manage and present design and construction information. This paper examines the feasibility of integrating design and construction scheduling information produced by 'industry standard' software. It describes the structure of a prototype which has been developed to generate a 3D simulation model for the construction sequence by integrating a CAD package with a project planning software. This study aims at establishing an integrated approach to communicate construction planning graphically to users (designers or construction managers) prior to construction in order to enhance the efficiency of the design/construction process.
series	journal paper
last changed	2003/05/15 21:45

_id	86dc
authors	Aouad, G., and Price, A.D.F.
year	1993
title	An integrated system to aid the planning of concrete structures: introducing the system
source	The Int. Journal of Construction IT1(2), pp.1-14
summary	This paper reports on the development at Loughborough University of a CAD-based integrated model to aid the planning of in-situ concrete structures. The system development started after a review of the planning models currently available and after a detailed questionnaire survey undertaken amongst the top UK and US contractors on the current status of planning techniques and information technology. The main aim of this system is to automate the planning process of in-situ concrete structures using data generated by CAD systems. So far, the integration of a CAD system (AutoCAD 10) and a computerized scheduling system (Artemis 2000) has been achieved on a typical IBM-PC. This enables the generation of network plans using AutoCAD which are then automatically transferred to the Artemis system for time and cost analyses.Traditionally, construction planners are faced with many conventional drawings and documents which are used to re-extract information relevant to their planning processes. Such an approach can be very inefficient as it involves data double-handling and is often error prone. In addition, current computerized construction planning applications are little more than the automation of manual formulations of plans. For example, data are fed into the planning system and computations are performed using either CPM (Critical Path Method) or PERT (Programme Evaluation and Review Technique). However, data relating to the planning process such as activity lists, resources requirements and durations are not automatically generated within the system. It would thus seem logical to devise a CAD-based integrated planning model which accepts data in its electronic format and involves some integration of the traditional planning approach. This paper introduces the proposed CAD-based integrated planning model and describes its different components. In addition, it discusses the system functional specifications and summarizes the main benefits and limitations of such a model.
series	journal paper
last changed	2003/05/15 21:45

_id	2ff9
id	2ff9
authors	Ataman, Osman
year	1993
title	Knowledge-based Stair Design
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 163-171
doi	https://doi.org/10.52842/conf.acadia.1993.163
summary	The application of computer--based technique to support architectural design has often concentrated on matters of representation. Typically, this means computer-aided drafting, and less frequently, computer-aided modeling and visualization. The promise of new computer-based tools to support the process of design has thus far failed to produce any significant tool that has had a widespread impact on the architectural profession. Most developments remain in university based research labs where they are used as teaching instruments in CAD courses or less often in design studios. While there are many reasons for this lack of dissemination, including a reluctance on the part of the architectural profession itself, the primary obstacles deal with difficulties in explicating design knowledge, representing this knowledge in a manner that can be used for design, and providing an intuitive and effective user interface, allowing the designer to easily use the tool for its intended purpose. This study describes a system that has been developed to address a number of these issues. Based on research findings from the field of Artificial Intelligence which expounds on the need for multiple techniques to represent any complex area of knowledge, we have selected a particular approach that focuses on multiple techniques for design representation. We review this approach in depth by considering its many facets necessary when implementing a knowledge-based system. We then partially test the viability of this approach through a small case study, implementing a knowledge-based system for designing stairs. While this effort only deals with a small part of the total design process, it does explore a number of significant issues facing the development of computer-based design assistants, and suggests several techniques for addressing these concerns.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	0ffe
authors	Bhat, R.R., Gauchel, J. and Van Wyk, S.
year	1993
title	Communication in Cooperative Building Design
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 481-493
summary	This paper addresses communication issues, which are crucial in any implementation of distributed design environments. Communication needs are specified and implemented in a prototype based on a modular knowledge-based approach for simulation of a distributed multi-user system. The results of these simulations are reported, which show communication to be scalable as the numbers of applications and the size of the design increases. Finally, the implications of the results on real distributed systems are discussed.
keywords	Building Design, Distributed Design Environments, Cooperative Design, Communication
series	CAAD Futures
last changed	2003/11/21 15:16

_id	4dd6
authors	Bhavnani, S.K., Garrett, J. and Shaw, D.S.
year	1993
title	Leading Indicators of CAD Experience
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 313-334
summary	Current interfaces and help facilities of CAD systems are not designed to respond to a user's performance. To develop such adaptive environments, a better understanding of the indicators of CAD experience is required. This paper discusses the results of studying behavior patterns of different types and levels of CAD users for a specific drawing task. The results show that the type and experience of the CAD user has a clear correlation to the pattern of commands used, the time taken, and the quality of drawing produced. By using the experimental data to train a neural network, the paper demonstrates a connectionist approach for experience assessment. This information, it is proposed, can provide input to an adaptive interface which generates unobtrusive interception to improve the performance of a CAD user. Future experiments to explore the issues of generality and interception are presented.
keywords	CAD user Modeling, Adaptive Interface, Neural Networks
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	4687
authors	Boekholt, J.T.
year	1993
title	Evaluation First Year Design Projects
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.u8b
summary	During the first year students are taught that it is important to learn to evaluate their projects themselves. Therefore a checklist is introduced and explained over the year which can be used by the students to formulate their criteria, evaluation scales and weighting factors. The main aspects that are evaluated are utility, structural and manufacturing aspects. Only little attention during the first year is given to legal and economical aspects. Main goal is to develop a systematic and integrated approach towards the evaluation of design projects. The evaluation of the student is compared with the judgement of the teacher. Final marks are given by the teacher.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	c207
authors	Branzell, Arne
year	1993
title	The Studio CTH-A and the Searching Picture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 129-140
summary	What happens during an architect’s search for the best solution? How does he (or she) begin, which tools are chosen, what happens when he comes to a standstill? The activities – sketching, discussions with other people, making models, taking walks to think, visits to the library, etc? What is an ordinary procedure and what is more specific? Do the tools have an impact on the final solution chosen? What happens during periods of no activity? Are they important? In which fields of activities are signs of the searching process to be found? In other words — what is the process of creative thinking for architects? Mikael Hedin and myself at Design Methods, Chalmers University of Technology, have started research into architects’ problem-solving. We have finished a pilot study on a very experienced architect working traditionally, without Cad (”The Bo Cederlöf Case”). We have started preliminary discussions with our second ”Case”, an architect in another situation, who has been working for many years with Cad equipment (Gert Wingårdh). For our next case, we will study a third situation – two or more architects who share the responsibility for the solution and where the searching is a consequence of a dialogue between equal partners. At present, we are preparing a report on theories in and methods for Searching and Creativity. I will give you some results of our work up till now, in the form of ten hypotheses on the searching process. Finally, I would like to present those fields of activity where we have so far found signs of searching. Our approach, in comparison with earlier investigations into searching (the most respected being Arnheim’s study on Picasso’s completion of the Guernica) is to collect and observe signs of searching during the process, not afterwards. We are, to use a metaphor, following in the footsteps of the hunter, recording the path he chooses, what marks he makes, what tools, implements and equipment he uses. For practising architects: a better understanding of what is going on and encouragement to try new ways of searching, for architectural students: better preparation and training for problem solving. It all began while we compared the different objects in our collection of sketches at the Chalmers STUDIO for Visualisation and Communication. (For some years, we have been gathering sketches by Alvar Aalto, Jorn Utzon, Ralph Erskine, Erik and Tore Ahlsén, Lewerenz, Nyrén, Lindroos, Wingårdh and others in a permanent exhibition). We observed similarities in these sketches which allowed us to frame ten hypotheses about the searching process.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	53da
authors	Carlson, Christopher
year	1993
title	Grammatical programming : an algebraic approach to the description of design spaces
source	Carnegie Mellon University
summary	The intuitiveness of spatial grammars makes them an attractive method of describing spaces of design. But grammars suffer from several inadequacies that limit their usefulness in design practice: (1) they cannot describe spaces of parametric, constrained designs, (2) they provide no control mechanisms for sequencing sets of rules, (3) they provide no 'subroutines' for dealing with complexity, and (4) they do not accommodate transformation mechanisms other than the rewrite rule. All of these inadequacies my [sic] be remedied by embedding grammars in a larger framework of nondeterministic functional programming, a paradigm we call 'grammatical programming.' In grammatical programs, rewrite rules are obtained from arbitrary nondeterministic functions by means of a 'rewrite closure' operator. Both rules and the designs they operate upon may be parametric and have attached constraints, permitting grammatical programs to describe spaces of parametric, constrained designs. Rewrite rules, and more generally, nondeterministic functions, are combined into compound functions by means of the operators of a control algebra, which provides functional composition, union, iteration, and a type of negation called 'failure.' The resulting modularity permits design space descriptions to be constructed, tested, and debugged piecewise, and to draw upon libraries of standard, debugged grammatical components. We begin this dissertation with an informal introduction to grammatical programming. We then give a formal, implementation-independent semantics of grammatical programs similar to the semantics of stratified logic programs. We discuss the implementation of a prototype compiler/interpreter and present case studies of the use of the prototype in describing spaces of rectangular dissections and a style of early Gothic traceries. We conclude with a discussion of lessons learned from the case studies and an agenda of further research necessary to make grammatical programming a useful tool in design practice.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	cbe7
authors	Caturano, Umberto and Sanseverino di Marcellinara, Carlo
year	1993
title	Solid Modelling by Low-cost Hardware and Software: The Crystal Palace's Node
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.m6j
summary	This paper describes the approach to the solid modelling by low-cost hardware and software, developed by a workgroup composed by staff members, young researchers and students of the University of Naples - Faculty of Architecture. The work was born in need of exposing to the students the project of Crystal Palace, designed in 1850 by J. Paxton, and used in the Italian universities as an example of first prefabrication by components and the organization of the yard. Using commercial programs and the students' computers, we had done a 3D model of the Crystal Palace's structural node, making an interesting experience based on the cooperation between university structures and private resources.
series	eCAADe
last changed	2022/06/07 07:50

_id	9937
authors	Chandansingh, R.A., and Vos, Ch.J.
year	1993
title	Modelling effects of cad on concrete construction using production graphs
source	The Int. Journal of Construction IT 1(4), pp. 39-50
summary	Quantitative statements on effects of CAD systems are needed to manage their use in concrete construction, but are hard to make. This paper describes an approach to model the effects of CAD systems on concrete construction. The approach is based on the concept of 'the market value of information commodities', and uses graph theory to build a formal model of the construction process. The formal model, so-called production graph, allows for investigation and quantification of the effects of CAD systems, which depend on their so-called value adding dimensions. An example of application of the approach is provided. Experiences with this approach are very good. General patterns between the value adding dimensions of CAD systems and their effects on production graphs must be determined to develop a descriptive and predictive model. Case-studies are being done to identify these general patterns.
series	journal paper
last changed	2003/05/15 21:45

_id	af70
authors	Coates, Paul and Yakeley, Megan
year	1993
title	Function Follows Form: A Description of the Work and Educational Objectives of the MSc in Computing & Design at the University of East London School of Architecture
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.o2g
summary	This paper demonstrates the approach to Architectural education that has been developed over the last 3 years on the MSc Computing & Design course at the University of East London. Although the course deals exclusively in computer based topics, the main concern is primarily with developing a design methodology and a way of teaching design method, more particularly an algorithmic description of form. Rule based design, emergent form and bottom up approaches to design have become fashionable to the point of ubiquity in the last 5 years, but we like to think that only at UEL have these concerns been linked to a consistent view of design.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cad5
authors	Coyne, R.F., Flemming, U., Piela, P. and Woodbury, R.
year	1993
title	Behavior Modeling in Design System Development
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 335-354
summary	We describe the development approach for a software environment to support the early phases in building design called SEED. The combination of capabilities offered by SEED to designers is novel and includes the integrated handling of solution prototypes. We give the reasons for using an object-oriented software engineering approach in the development of the system, which starts with a comprehensive behavioral model of the system from the user's perspective based on actors and use cases. We illustrate results from the first development phase and sketch the next phases. At the time of the CAAD Futures '93 conference, we will be able to report our experience in developing a first system prototype and to demonstrate the prototype.
keywords	Object-Oriented Software Engineering, Integrated Design Systems, Architectural Programming, Schematic Layout Design
series	CAAD Futures
email
last changed	2003/02/26 17:24

_id	cbfe
authors	Dave, Bharat
year	1993
title	CDT: A Computer-Assisted Diagramming Tool
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 91-109
summary	This paper describes the development of a computer- based diagramming tool (CDT) that supports incremental structuring of problem information using diagrammatic representations. Diagrams as graphic representations of symbolic propositions allow tentative reasoning and inferencing. The development of CDT has been carried out based on two observations. First, many diagrams are used to represent objects and relations between them. Second, diagrams comprise graphic Symbols arranged on a plane using topological and geometric relations to denote problem relevant information. CDT responds to these needs by incorporating a number of computational ideas: graphic interface, direct manipulation, constraint representation by demonstration, and specification and satisfaction of diagram composition rules.
keywords	Tentative Reasoning, Incremental Problem Representation and Exploration, Diagramming
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	eaea2005_000
id	eaea2005_000
authors	Dechène, Sigrun und Manfred Walz (Eds.)
year	2006
title	Motion, E-Motion and Urban Space
source	Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4, 260 p.
summary	Simulating the development and the image of architecture and urban design means to show how the environment of the future and the living conditions could develop. At the same time it is part of our task to explain our work to local people and to the public and to passion skills in methods, instruments and knowledge in planning to the next generation of architects, planners and last but not least to discuss and to renew them once more for ourselves. Our aim was also to reflect what we have done since starting the look through the key-hole of endoscopy. Meanwhile this look has been completed since the beginnings in 1993 much more by computer and monitor. It is not the question to take the endoscope or the computer as a methodical and instrumental approach. Nowadays we normally decide to take the endoscope and the computer. In preparing the conference and the workshop we thought that this should now also be the moment not only to inform each other and the participants on methods, tools and best practices in simulating and designing the environment but also to focus on the social and human consequences of perception, movement and use the present urban spaces and the urban space in future. So we proposed the theme “MOTION, E-MOTION and URBAN SPACE” and we invited a scientific expert in experimental psychology to give us some serious reflections and one or another hint on our research themes and methods. The contributions and discussions in the conference showed that the proposal has not only been accepted but has also been completed and enriched especially concerning the theme urban space, it’s processes of usage and it‘s atmosphere. Also in the themes of endoscopy and the research on modelling urban spaces and architecture, meanwhile nearly “traditional” ones, remarkable results were presented and discussed. A very important point of contributions and the following discussions was how to present our subjects to the interested public and to improve our own internal exchange. An object could be to enforce the research tasks in researching together even more.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	4980
authors	Flemming, Ulrich and Mahdavi, Ardeshir
year	1993
title	Simultaneous Form Generation and Performance Evaluation: A "Two-Way" Inference Approach
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 161-173
summary	The conventional approach toward performance evaluation transforms given design attributes into performance indicators, and designers can improve these indicators only indirectly through the manipulation of design attributes. This paper outlines a contrasting "two-way " inference approach that allows designers to also manipulate the performance indicators directly and observe the resulting changes in design attributes. The advantages of this approach and its limitations are outlined. Methodological and implementation difficulties that arise from it are introduced, and possible solution strategies are described. A first prototype for a system that implements and demonstrates this approach is outlined. The larger debate about 'functionalism " touched by this approach, and its response to it, are briefly reviewed.
keywords	Form Generation, Performance Evaluation, Form-Function Mapping, Two-Way Approach
series	CAAD Futures
email
last changed	2003/02/26 17:26

_id	ddss9207
id	ddss9207
authors	Gauchel, J., Hovestadt, L., van Wyk, S. and Bhat, R.R.
year	1993
title	Modular building models
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The development and implementation of a modular building model appropriate for computer aided design is described. The limitations of a unified building model with regard to concurrence and complexity in design is discussed. Current research suggests that to model real-world complexity, one must trade centralized control for autonomy. In this paper we develop a modular approach to building modelling that is based on object-oriented autonomy and makes it possible to define these models in a distributed concurrent manner. Such a modular and autonomous implementation brings inherent uncertainty and conflict which cannot be determined a priori.
series	DDSS
last changed	2003/08/07 16:36

_id	e994
id	e994
authors	Gero, J. S.
year	1993
title	The role of visual emergence in collaborative design
source	Computational Support for Distributed Collaborative Design, Key Centre of Design Computing, University of Sydney, pp. 103-115
summary	There are two fundamental approaches to the use of computers to support collaborative design: (i) to use the computer as a device which increases the efficiency of what designers could do previously, and (ii) to use the computer as an active device which allows designers to do what they could not readily do previously. // This paper is concerned with the latter approach by introducing the concept of visual or graphical emergence as one form of collaboration at a distance that can not readily be carried out without the aid of the computer.
series	other
type	normal paper
email
more	http://www.arch.usyd.edu.au/~john/
last changed	2006/05/27 18:21

_id	e00f
authors	Harfmann, A.C., Majkowski, B. and Chen, S.S.
year	1993
title	A Component-Based Approach to Building Product Representation and Design Development
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 437-452
summary	This paper presents the development of the component-based approach for building product representation and suggests its appropriateness for incorporation at any stage in the design process. The efforts focus on resolving the conflicts that arise when the common denominator of component level representation in utilized throughout the process of designing a building.
keywords	Component-Based Modeling, Component Modeling; Product Models; Building Models, Object-Oriented Modelling, Relational Databases
series	CAAD Futures
email
last changed	2003/05/16 20:58

For more results click below: