Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 254

Reformat results as: short short into frame detailed detailed into frame

_id	0c88
authors	Bedell, John R. and Kohler, Niklaus
year	1993
title	A Hierarchical Model for Building Applications
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 423-435
summary	Advanced computer-aided architectural applications must model buildings as multi-level compositions supporting distinct points of view. Hierarchies of encapsulated, autonomous elements can be derived from ISO-STEP's General AEC Reference Model and configured for various applications. For analysis of life-cycle costs, we define a Pyramid of evaluable production steps leading to the final building; for optimization of renovation task schedules, a topological model of access paths and traffic flow. These separate viewpoints can be embedded in a single unifying structure permitting the communication and propagation of changes among its specialized aspects.
keywords	Design Model, Decision Support System, Object-Oriented Data Model, Building Product Model, STEP-GARM
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	ddss9205
id	ddss9205
authors	De Scheemaker. A.
year	1993
title	Towards an integrated facility management system for management and use of government buildings
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The Government Building Agency in the Netherlands is developing an integrated facility management system for two of its departments. Applications are already developed to support a number of day-to-day facility management activities on an operational level. Research is now being carried out to develop a management control system to better plan and control housing and material resources.
series	DDSS
last changed	2003/08/07 16:36

_id	caadria2007_675
id	caadria2007_675
authors	Huang, Joseph Chuen-Huei
year	2007
title	Decision Support System for Modular Houses
doi	https://doi.org/10.52842/conf.caadria.2007.x.x9q
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Presently, only a small percentage of people in the world typically hire an architect to design and build a home which is tailored to their preference. Besides the architect’s fee, clients also need to wait an interminable time for design and construction. Factory-made prefabricated housing systems tried to solve this problem previously. However, most pioneers failed to address the issues of variability and individual needs (Kieran & Timberlake, 2004). Plants closed because they produced more than the market demand, and prefabricated housing provided less flexibility than the traditional stick-built housing. The advanced digital technology makes it possible to communicate design ideas and concepts to others more effectively. The project delivery process leads itself to customization, embodying principles of lean production (Pine, 1993), flexible computer-integrated design interaction with clients, and reduced cycle times; all effecting rapid response between consumers and producers.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ddss9208
id	ddss9208
authors	Lucardie, G.L.
year	1993
title	A functional approach to realizing decision support systems in technical regulation management for design and construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Technical building standards defining the quality of buildings, building products, building materials and building processes aim to provide acceptable levels of safety, health, usefulness and energy consumption. However, the logical consistency between these goals and the set of regulations produced to achieve them is often hard to identify. Not only the large quantities of highly complex and frequently changing building regulations to be met, but also the variety of user demands and the steadily increasing technical information on (new) materials, products and buildings have produced a very complex set of knowledge and data that should be taken into account when handling technical building regulations. Integrating knowledge technology and database technology is an important step towards managing the complexity of technical regulations. Generally, two strategies can be followed to integrate knowledge and database technology. The main emphasis of the first strategy is on transferring data structures and processing techniques from one field of research to another. The second approach is concerned exclusively with the semantic structure of what is contained in the data-based or knowledge-based system. The aim of this paper is to show that the second or knowledge-level approach, in particular the theory of functional classifications, is more fundamental and more fruitful. It permits a goal-directed rationalized strategy towards analysis, use and application of regulations. Therefore, it enables the reconstruction of (deep) models of regulations, objects and of users accounting for the flexibility and dynamics that are responsible for the complexity of technical regulations. Finally, at the systems level, the theory supports an effective development of a new class of rational Decision Support Systems (DSS), which should reduce the complexity of technical regulations and restore the logical consistency between the goals of technical regulations and the technical regulations themselves.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9215
id	ddss9215
authors	Mortola, E. and Giangrande, A.
year	1993
title	A trichotomic segmentation procedure to evaluate projects in architecture
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper illustrates a model used to construct the evaluation module for An Interface for Designing (AID), a system to aid architectural design. The model can be used at the end of every cycle of analysis-synthesis-evaluation in the intermediate phases of design development. With the aid of the model it is possible to evaluate the quality of a project in overall terms to establish whether the project is acceptable, whether it should be elaborated ex-novo, or whether it is necessary to begin a new cycle to improve it. In this last case, it is also possible to evaluate the effectiveness of the possible actions and strategies for improvement. The model is based on a procedure of trichotomic segmentation, developed with MCDA (Multi-Criteria Decision Aid), which uses the outranking relation to compare the project with some evaluation profiles taken as projects of reference. An application of the model in the teaching field will also be described.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9212
id	ddss9212
authors	Prins, M., Bax, M.F.TH., Carp, J.C. and Tempelmans Plat, H.
year	1993
title	A design decision support system for building flexibility and costs
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Because of possible changes in demand, buildings must have some flexibility. In this paper a building model, a financial-economic model and a process model will be presented, which together constitute a design decision support system. This system may be used to decide on flexibility and costs of building variants in all phases of the design process.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9204
id	ddss9204
authors	Pullen, W.R., Wassenaar, C.L.G., van Heti'ema, I., Dekkers, J.T., Janszen, I., Boender, C.G.E., Tas, A. and Stegeman, H.
year	1993
title	A decision support system for housing of (public) organizations
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	In this paper we present a hierarchical decision support system for the allocation of organisations to available buildings, and for the allocation of employees of an organisation to the work units of a building. For both allocation problems a mathematical model and optimisation algorithm is developed, taking into account the relevant criteria, such as the extent to which the allocated floorspace is in accordance with the standards, and the extent to which departments are housed in connecting zones of a building. The decision support system is illustrated by two practical applications.
series	DDSS
last changed	2003/08/07 16:36

_id	8077
authors	Shapira, A., Boyer, L.T. and Najem, Z.H.
year	1993
title	Decision support system for air base construction operations
source	The Int. Journal of Construction IT 1(2), pp. 69-82
summary	The United States Air Force has recently introduced a CAD software performing air base planning and operability functions. This paper presents a prototype system developed to support that software in enhancing decision-making processes for construction operations, by integrating its CAD/graphics capabilities with a database management system (DBMS). The system addresses the complexity and unique nature of the air base environment and takes due account of the importance of the efficient utilization of resources. It assists in the generation of alternative solutions and furnishes comparative and indicative evaluations of these, thus providing the decision maker with proper guidance towards the expeditious selection of good solution. System fundamentals and the rationale behind them are described. A typical scenario is presented, illustrating the concepts developed and demonstrating the potential benefits of the system as a practical decision-support tool. Although originally aimed for an air base environment, the proposed solution could also readily apply to civilian systems of similar characteristics.
series	journal paper
last changed	2003/05/15 21:45

_id	ddss9203
id	ddss9203
authors	Smeets, J.
year	1993
title	Housing tenancy, data management and quality control
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper deals with housing tenancy, data management and quality control. The proposed method is focused on quality characteristics of housing estates in view of rentability risks. It entails a cycle of registration, analysis and implementation of measures. The starting point is the behaviour of the housing consumer in a market-oriented context. The model is framed within theories of strategic management and marketing. Systematic registration and evaluation of consumer behaviour, by means of a set of relevant process and product indicators, can yield relevant information in the four phases of the rental process: orientation, intake, dwelling and exit. This information concerns the way in which the dwelling (characterized by product indicators) fits the needs of the consumer. The systematic analysis of the process and product indicators during the phases of the rental process makes a 'strength-weakness analysis' of housing estates possible. The indicators can be presented in aggregated form by way of a 'rentability index. The 'strength-weakness analysis' steers the intervention in the quality characteristics of housing estates. The possibilities for readjustment, however, are different. The quality control system is not only an early warning system, but also has several other functions: evaluation, planning and communication. The method described here lays a solid foundation for a decision-support system in the area of housing tenancy.
series	DDSS
last changed	2003/08/07 16:36

_id	2ff9
id	2ff9
authors	Ataman, Osman
year	1993
title	Knowledge-based Stair Design
doi	https://doi.org/10.52842/conf.acadia.1993.163
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 163-171
summary	The application of computer--based technique to support architectural design has often concentrated on matters of representation. Typically, this means computer-aided drafting, and less frequently, computer-aided modeling and visualization. The promise of new computer-based tools to support the process of design has thus far failed to produce any significant tool that has had a widespread impact on the architectural profession. Most developments remain in university based research labs where they are used as teaching instruments in CAD courses or less often in design studios. While there are many reasons for this lack of dissemination, including a reluctance on the part of the architectural profession itself, the primary obstacles deal with difficulties in explicating design knowledge, representing this knowledge in a manner that can be used for design, and providing an intuitive and effective user interface, allowing the designer to easily use the tool for its intended purpose. This study describes a system that has been developed to address a number of these issues. Based on research findings from the field of Artificial Intelligence which expounds on the need for multiple techniques to represent any complex area of knowledge, we have selected a particular approach that focuses on multiple techniques for design representation. We review this approach in depth by considering its many facets necessary when implementing a knowledge-based system. We then partially test the viability of this approach through a small case study, implementing a knowledge-based system for designing stairs. While this effort only deals with a small part of the total design process, it does explore a number of significant issues facing the development of computer-based design assistants, and suggests several techniques for addressing these concerns.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	c372
authors	Calvert, T., Bruderlin, A., Mah, S., Schiphorst, T. and Welman, C.
year	1993
title	The Evolution of an Interface for Choreographers Evolving Design
source	Proceedings of ACM INTERCHI'93 Conference on Human Factors in Computing Systems 1993 pp. 115-122
summary	This paper describes the evolution of the interface to Life Forms, a compositional tool for the creation of dance choreography, and highlights some of the important lessons we have learned during a six year design and implementation period. The lessons learned can be grouped into two categories: 1) Process, and 2) Architecture of the Interface. Our goal in developing a tool for choreography has been to provide computer-based creative design support for the conception and development of dance. The evolution was driven by feedback from the choreographers and users who were members of the development team, combined with our knowledge of current thinking on design and composition. Although the interface evolved in a relatively unconstrained way, the resulting system has many of the features that theoretical discussion in human interface design has projected as necessary. The Life Forms interface has evolved incrementally with one major discontinuity where adoption of a new compositional primitive required a completely new version. The choreography and composition of a dance is a complex synthesis task which has much in common with design. Thus, the lessons learned here are applicable to the development of interfaces to such applications as computer aided design.
keywords	Composition; Design; User Interface; Dance; Complexity; Choreography; Human Animation
series	other
last changed	2002/07/07 16:01

_id	cad5
authors	Coyne, R.F., Flemming, U., Piela, P. and Woodbury, R.
year	1993
title	Behavior Modeling in Design System Development
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 335-354
summary	We describe the development approach for a software environment to support the early phases in building design called SEED. The combination of capabilities offered by SEED to designers is novel and includes the integrated handling of solution prototypes. We give the reasons for using an object-oriented software engineering approach in the development of the system, which starts with a comprehensive behavioral model of the system from the user's perspective based on actors and use cases. We illustrate results from the first development phase and sketch the next phases. At the time of the CAAD Futures '93 conference, we will be able to report our experience in developing a first system prototype and to demonstrate the prototype.
keywords	Object-Oriented Software Engineering, Integrated Design Systems, Architectural Programming, Schematic Layout Design
series	CAAD Futures
email
last changed	2003/02/26 17:24

_id	e92c
authors	Dave, Bharat
year	1993
title	A Computer-Assisted Diagramming System
source	Swiss Federal Institute of Technology, ETH Zurich
summary	This research investigates characteristics and generation of graphic diagrams used in support of analysis, presentation and synthesis of information in various domains. The research is aimed at the development of a software system which can be used to specify, generate and manipulate diagrams similar to the way they are represented and operated upon in traditional media.Diagrams are graphic representations of symbolic propositions that allow tentative reasoning and inferencing, and enable a person to focus on selected aspects of a situation that are deemed of interest. The economy and directness of expression found in diagrams seem to be the prime reasons why they are so ubiquitous in many domains. Despite these advantages, studies into supporting diagrammatic representations using computers are rather sparse. This research is an attempt at developing a comprehensive framework of thought in this direction.In the context of design disciplines like architecture, this research forms a part of the continuum of studies in computer aided design techniques and tools. While a large number of tools and techniques in CAD have emerged so far, usage of such tools, due to their underlying representations, expects and demands commitment of too many details too early in the design process. This research is aimed at characterizing and developing a computer based diagramming system to support tentative reasoning using diagrams, and thus hopes to extend the scope of CAD environments in design.The thesis first articulates motivations for this topic in detail. Next, a discussion on the role played by diagrams as conceptual tools in various domains is presented. It is followed by a detailed look at characteristics and components of diagrams viewed as a graphic communication system. Next, a comprehensive set of requirements for an ideal software environment for diagramming tasks is developed. A prototype system called CDT was implemented and is used to demonstrate ideas developed in this research. The study concludes with some observations on contributions of this research effort and possible future extensions.
series	thesis:PhD
email
last changed	2003/05/10 05:43

_id	ddss9209
id	ddss9209
authors	De Gelder, J.T. and Lucardie, G.L.
year	1993
title	Knowledge and data modelling in cad/cam applications
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Modelling knowledge and data in CAD/CAM applications is complex because different goals and contexts have to be taken into account. This complexity makes particular demands upon representation formalisms. Today many modelling tools are based on record structures. By analyzing the requirements for a product model of a portal structure in steel, this paper shows that in many situations record structures are not well suited as a representation formalism for storing knowledge and data in CAD/CAM applications. This is illustrated by performing a knowledge-level analysis of the knowledge and data generated in the design and manufacturing process of a portal structure in steel.
series	DDSS
last changed	2003/08/07 16:36

_id	8326
authors	Diessenbacher, Claus and Rank, Ernst
year	1993
title	Teaching Design with CAD?
doi	https://doi.org/10.52842/conf.ecaade.1993.x.i1h
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Abstract as well as functionally dependant design exercises are essential components of an architectural education at nearly every university. Their goal is to provide architect students with a feeling for proportions, colours, materials etc., and to teach and train them in threedimensional thinking. Pictures and concepts, developed by the designer are materialized by various technologies such as with pencil and paper in the traditional two-dimensional techniques or with clay, wood, paper etc. in three-dimensional modeling. Now the computer and the CAD-system join the palette of the designers available resources in presentation as both a two-dimensional and a three-dimensional medium. Although CAD is often considered and taught to be only a better drafting tool, the educational goal of our group at the University of Dortmund is to employ CAD as a design support medium. The prerequisites for work with the computer and the CAD system are provided in a compulsory two semester undergraduate subject. Basic programming, work with spreadsheets etc. are some exemplary themes provided in the form of lectures and practical exercises. A main emphasis of this instruction is the mastery of three-dimensional working technology with a comprehensive CAD-System. In cooperation of our computer science group and architecture chairs, seminars involving the use of CAD as a three-dimensional design tool, are offered as graduate courses. The seminars consist of loops of modeling and evaluating objects in a three-dimensional space. With this, the most possible realistic studies in colour, light and proportion take place exclusively on the computer.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9206
id	ddss9206
authors	Drach, A., Langenegger, M. and Heitz, S.
year	1993
title	Working with prototypes: from cad to flexible tools for integrated building design
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The formulation of design knowledge as concepts, goals and rules cannot be captured in fixed and valid statements. The dynamic modelling of concepts and goals is, on the contrary, part of the design process itself. Tools that effectively support architects in their design should therefore never use predefined mechanisms, but must be definable interactively according to design specifications. We propose the concept of prototypes as a cognitive model to represent and structure design knowledge. Prototypes incorporate an individual view of design in a synthetic and organizational model for a defined area of interest. They actively control and guide design processes in supporting the organizational concepts for solutions. The a+Tool implements these concepts on the basis of a modelling language. It provides a dynamic toolkit and user interface to support design as well as knowledge modelling.
series	DDSS
last changed	2003/08/07 16:36

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	ddss9214
id	ddss9214
authors	Friedman, A.
year	1993
title	A decision-making process for choice of a flexible internal partition option in multi-unit housing using decision theory techniques
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Recent demographic changes have increased the heterogeneity of user groups in the North American housing market. Smaller households (e.g. elderly, single parent) have non-traditional spatial requirements that cannot be accommodated within the conventional house layout. This has created renewed interest in Demountable/Flexible internal partition systems. However, the process by which designers decide which project or user groups are most suited for the use of these systems is quite often complex, non-linear, uncertain and dynamic, since the decisions involve natural processes and human values that are apparently random. The anonymity of users when mass housing projects are conceptualized, and the uncertainty as to the alternative to be selected by the user, given his/her constantly changing needs, are some contributing factors to this effect. Decision Theory techniques, not commonly used by architects, can facilitate the decision-making process through a systematic evaluation of alternatives by means of quantitative methods in order to reduce uncertainty in probabilistic events or in cases when data is insufficient. The author used Decision Theory in the selection of flexible partition systems. The study involved a multi-unit, privately initiated housing project in Montreal, Canada, where real site conditions and costs were used. In this paper, the author outlines the fundamentals of Decision Theory and demonstrates the use of Expected Monetary Value and Weighted Objective Analysis methods and their outcomes in the design of a Montreal housing project. The study showed that Decision Theory can be used as an effective tool in housing design once the designer knows how to collect basic data.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9207
id	ddss9207
authors	Gauchel, J., Hovestadt, L., van Wyk, S. and Bhat, R.R.
year	1993
title	Modular building models
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The development and implementation of a modular building model appropriate for computer aided design is described. The limitations of a unified building model with regard to concurrence and complexity in design is discussed. Current research suggests that to model real-world complexity, one must trade centralized control for autonomy. In this paper we develop a modular approach to building modelling that is based on object-oriented autonomy and makes it possible to define these models in a distributed concurrent manner. Such a modular and autonomous implementation brings inherent uncertainty and conflict which cannot be determined a priori.
series	DDSS
last changed	2003/08/07 16:36

For more results click below: