Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 165

Reformat results as: short short into frame detailed detailed into frame

_id	5df5
authors	Fournier, A., Gunawan, A. and Romanzin, C.
year	1993
title	Common Illumination between Real and Computer Generated Scenes
source	Proceedings Graphics Interface '93, pp. 254-262, 1993
summary	The ability to merge a real video image (RVI) with a computer- generated image (CGI) enhances the usefulness of both. To go beyond "cut and paste" and chroma-keying, and merge the two images successfully, one must solve the problems of common viewing parameters, common visibility and common illumination. The result can be dubbed Computer Augmented Reality (CAR). We present in this paper techniques for approximating the common global illumination for RVIs and CGIs, assuming some elements of the scene geometry of the real world and common viewing parameters are known. Since the real image is a projection of the exact solution for the global illumination in the real world (done by nature), we approximate the global illumination of the merged image by making the RVI part of the solution to the common global illumination computation. The objects in the real scene are replaced by few boxes covering them; the image intensity of the RVI is used as the initial surface radiosity of the visible part of the boxes; the surface reflectance of the boxes is approximated by subtracting an estimate of the illuminant intensity based on the concept of ambient light; finally global illumination using a classic radiosity computation is used to render the surface of the CGIs with respect to their new environment and for calculating the amount of image intensity correction needed for surfaces of the real image. An example animation testing these techniques has been produced. Most of the geometric problems have been solved in a relatively ad hoc manner. The viewing parameters were extracted by interactive matching of the synthetic scene with the RVIs. The visibility is determined by the relative position of the "blocks" representing the real objects and the computer generated objects, and a moving computer generated light has been inserted. The results of the merging are encouraging, and would be effective for many applications.
series	other
last changed	2003/04/23 15:50

_id	d6a3
authors	Alkhoven, Patricia
year	1993
title	The Changing Image of the City
source	University of Utrecht
summary	The image and structure of a town are constantly subject to a dynamic process of change and continuity. Visual material, such as photographs, historical maps, town plans, drawings and prints, show us the impact of these changes on the image of a town. The main point of departure of this study stems from the question of how this process of change and continuity is visually detectable in a town or city. The fact that the ideas about the appearance of a city (gradually) change, can be read from the often subtle changes in the townscape. Though in many cases we have a general knowledge of the choices made in urban management, the most difficult problem is to detect the underlying decisions. This raises the question to what extent these changes and also the continuities are the result of deliberate choices in urban management and to what extent they are autonomous developments in the townscape resistant to interventions. Using different kinds of visual information as a basis, computer visualization techniques are used in the present study to examine some cartographic maps and to reconstruct the urban development in the twentieth century of the town of Heusden three-dimensionally in significant phases. The resulting visualization provides us with a tool for a better understanding of the dynamics of urban transformation processes, typologies and morphological changes and continuities.
keywords	3D City Modeling
series	thesis:PhD
email
more	http://www.library.uu.nl/digiarchief/dip/diss/01754573/hfdheus.htm
last changed	2003/05/15 21:36

_id	4c30
authors	Aura, Seppo
year	1993
title	Episode as a Unit of Analysis of Movement
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 53-66
summary	Everybody who has read his Gordon Cullen or his Edmund H. Bacon knows that movement has long been recognized as a factor in environmental planning in many ways. For example, in the traditional Japanese promenade garden the importance of movement has always been appreciated. The promenader gains an intense experience of the succession, variation and rhythm of the surrounding scene. The spaces and paths lead him from one stage to another. The spatial structure of the Japanese promenade garden, as well as of traditional Japanese architecture in general, is joined most intensively to time and motion. The environment is in relation to the flow of change in many sense, both concretely and existentially. Taking an example of western urban environment. Here perhaps the most marked sequential spaces are to be found in small medieval, mediterranean towns. Thanks to their organic growth, narrow and winding streets and the emphasis on public squares, most of them provide exciting experiences if the observer is only interested in seeing the townscape from the point of view of movement. There are also examples of this kind of environment in Finland. In old wooden towns like Porvoo and Rauma one can still find varied and rhythmic streetscapes and networks of streets and squares, together with a human scale and an almost timeless atmosphere. One could say that such an opportunity to experience spaces sequentially, or as serial visions, is an important dimension for us, especially as pedestrians. And as Gordon Cullen has shown there is in any urban environment much scope to heighten this experience. For example, by creating a sense of ’entering in’ some place, ’leaving for’, ’moving towards’, ’turning into’, ’walking through’ some place or ’following on’ the flow of spaces. Or, as Edmund H. Bacon has said, the departure point of good town planning should be that the successive towns spaces give rise to a flow of harmonic experiences: present experiences merge with earlier ones and become a step towards a future. Or, again in the words of Donald Appleyard, Kevin Lynch and John R. Myer: “The experience of a city is basically of a moving view, and this is the view we must understand if we wish to reform the look of our cities”.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	aa7f
authors	Bollinger, Elizabeth and Hill, Pamela
year	1993
title	Virtual Reality: Technology of the Future or Playground of the Cyberpunk?
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 121-129
doi	https://doi.org/10.52842/conf.acadia.1993.121
summary	Jaron Lanier is a major spokesperson of our society's hottest new technology: VR or virtual reality. He expressed his faith in the VR movement in this quote which appears in The User's Guide to the New Edge published by Mondo 2000. In its most technical sense, VR has attracted the attention of politicians in Washington who wonder if yet another technology developed in the United States will find its application across the globe in Asia. In its most human element, an entire "cyberpunk movement" has appealed to young minds everywhere as a seemingly safe form of hallucination. As architecture students, educators, and practitioners around the world are becoming attracted to the possibilities of VR technology as an extension of 3D modeling, visualization, and animation, it is appropriate to consider an overview of virtual reality. In virtual reality a user encounters a computersimulated environment through the use of a physical interface. The user can interact with the environment to the point of becoming a part of the experience, and the experience becomes reality. Natural and instinctive body movements are translated by the interface into computer commands. The quest for perfection in this human-computer relationship seems to be the essence of virtual reality technology. To begin to capture the essence of virtual reality without first-hand experience, it is helpful to understand two important terms: presence and immersion. The sense of presence can be defined as the degree to which the user feels a part of the actual environment. The more reality the experience provides, the more presence it has. Immersion can be defined as the degree of other simulation a virtual reality interface provides for the viewer. A highly immersive system might provide more than just visual stimuli; for example, it may additionally provide simulated sound and motion, and simultaneously prevent distractions from being present.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	cad5
authors	Coyne, R.F., Flemming, U., Piela, P. and Woodbury, R.
year	1993
title	Behavior Modeling in Design System Development
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 335-354
summary	We describe the development approach for a software environment to support the early phases in building design called SEED. The combination of capabilities offered by SEED to designers is novel and includes the integrated handling of solution prototypes. We give the reasons for using an object-oriented software engineering approach in the development of the system, which starts with a comprehensive behavioral model of the system from the user's perspective based on actors and use cases. We illustrate results from the first development phase and sketch the next phases. At the time of the CAAD Futures '93 conference, we will be able to report our experience in developing a first system prototype and to demonstrate the prototype.
keywords	Object-Oriented Software Engineering, Integrated Design Systems, Architectural Programming, Schematic Layout Design
series	CAAD Futures
email
last changed	2003/02/26 17:24

_id	e92c
authors	Dave, Bharat
year	1993
title	A Computer-Assisted Diagramming System
source	Swiss Federal Institute of Technology, ETH Zurich
summary	This research investigates characteristics and generation of graphic diagrams used in support of analysis, presentation and synthesis of information in various domains. The research is aimed at the development of a software system which can be used to specify, generate and manipulate diagrams similar to the way they are represented and operated upon in traditional media.Diagrams are graphic representations of symbolic propositions that allow tentative reasoning and inferencing, and enable a person to focus on selected aspects of a situation that are deemed of interest. The economy and directness of expression found in diagrams seem to be the prime reasons why they are so ubiquitous in many domains. Despite these advantages, studies into supporting diagrammatic representations using computers are rather sparse. This research is an attempt at developing a comprehensive framework of thought in this direction.In the context of design disciplines like architecture, this research forms a part of the continuum of studies in computer aided design techniques and tools. While a large number of tools and techniques in CAD have emerged so far, usage of such tools, due to their underlying representations, expects and demands commitment of too many details too early in the design process. This research is aimed at characterizing and developing a computer based diagramming system to support tentative reasoning using diagrams, and thus hopes to extend the scope of CAD environments in design.The thesis first articulates motivations for this topic in detail. Next, a discussion on the role played by diagrams as conceptual tools in various domains is presented. It is followed by a detailed look at characteristics and components of diagrams viewed as a graphic communication system. Next, a comprehensive set of requirements for an ideal software environment for diagramming tasks is developed. A prototype system called CDT was implemented and is used to demonstrate ideas developed in this research. The study concludes with some observations on contributions of this research effort and possible future extensions.
series	thesis:PhD
email
last changed	2003/05/10 05:43

_id	ecaade2014_153
id	ecaade2014_153
authors	David Morton
year	2014
title	Augmented Reality in architectural studio learning:How Augmented Reality can be used as an exploratory tool in the design learning journey
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 343-356
doi	https://doi.org/10.52842/conf.ecaade.2014.1.343
wos	WOS:000361384700034
summary	The boundaries of augmented reality in the academic field are now being explored at an ever increasing level. In this paper we present the initial findings of an educational project focusing on the use of augmented reality in the design process of an architectural student. The study seeks to evaluate the use of AR as a tool in the design stages, allowing effective exploration of spatial qualities of design projects undertaken in the studio. The learning process is guided by the exploration and detection of a design idea in both form and function, with the virtual environment providing a dynamic environment (Mantovani, 2001). This is further reflected in the constructivist theory where the learning processes use conceptual models, which are used to create incremental stages that become the platform to attain the next [Winn, 1993]. The additional benefit of augmented reality within the learning journey is the ability of the students to visually explore the architectural forms they are creating in greater depth.
keywords	Augmented reality; pedagogy; learning journey; exploration
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2014_146
id	ecaade2014_146
authors	Davide Ventura and Matteo Baldassari
year	2014
title	Grow: Generative Responsive Object for Web-based design - Methodology for generative design and interactive prototyping
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 587-594
doi	https://doi.org/10.52842/conf.ecaade.2014.2.587
wos	WOS:000361385100061
summary	This paper is part of the research on Generative Design and is inspired by the ideas spread by the following paradigms: the Internet of Things (Auto-ID Center, 1999) and the Pervasive/Ubiquitous Computing (Weiser, 1993). Particularly, the research describes a number of case studies and, in detail, the experimental prototype of an interactive-design object: “Grow-1”. The general assumptions of the study are as follows: a) Developing the experimental prototype of a smart-design object (Figure 1) in terms of interaction with man, with regard to the specific conditions of the indoor environment as well as in relation to the internet/web platforms. b) Setting up a project research based on the principles of Generative Design.c) Formulating and adopting a methodology where computational design techniques and interactive prototyping ones converge, in line with the principles spread by the new paradigms like the Internet of Things.
keywords	Responsive environments and smart spaces; ubiquitous pervasive computing; internet of things; generative design; parametric modelling
series	eCAADe
email
last changed	2022/06/07 07:55

_id	8b38
authors	Do, Ellen Yi-Luen and Gross, Mark D.
year	1998
title	The Sundance Lab- "Design Systems of the Future"
source	ACADIA Quarterly, vol. 17, no. 4, pp. 8-10
doi	https://doi.org/10.52842/conf.acadia.1998.008
summary	The last thirty years have seen the development of powerful new tools for architects and planners: CAD, 3D modeling, digital imaging, geographic information systems, and real time animated walkthroughs. That’s just the beginning. Based on our experience with CAD tools, analysis of design practice, and an understanding of computer hardware and software, we’re out to invent the next generation of tools. We think architects should be shakers and makers, not just consumers, of computer aided design. We started the Sundance Lab (for Computing in Design and Planning) in 1993 with a few people and machines. We’ve grown to more than a dozen people (mostly undergraduate students) and a diverse interdisciplinary array of projects. We’ve worked with architects and planners, anthropologists, civil engineers, geographers, computer scientists, and electrical engineers. Our work is about the built environment: its physical form and various information involved in making and inhabiting places. We cover a wide range of topics – from design information management to virtual space, from sketch recognition to design rationale capture, to communication between designer and computer. All start from the position that design is a knowledge based and information rich activity. Explicit representations of design information (knowledge, rationale, and rules) enables us to engage in more intelligent dialogues about design. The following describes some of our projects under various rubrics.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	c32f
authors	Grant, Mike
year	1993
title	Issue - Interactive Software Systems for the Urban Environment
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 557-564
summary	The research reported here sought to examine the prospect for linking data sets which are currently isolated within specific departments or held externally by utility companies or businesses each of whom are likely to benefit from pooling resources. These data sets are potentially capable of being merged into one comprehensive system with the prospect that the sum of the parts would be worth considerably more than their individual worth suggests.
keywords	Computer-Aided Architectural Design, Urban Management Visualization, Geographical Information Systems
series	CAAD Futures
last changed	1999/11/23 19:40

_id	c5bb
authors	Hirschberg, U., Meister, M. and Neumann, F.
year	1993
title	Processing of Geographic Data for CAAD-supported Analysis and Design of Urban Development Areas
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.w2h
summary	The interdisciplinary research project aims at the development of a hard- and software environment to support the representation, analysis, manipulation and design of urban development areas for architects and city planners. It was started in 1990 and involves three groups at the ETH Zurich: Architecture/Urban design - Processing of Geographic Data/Photogrammetry -Computer Sciences/CAAD. The first part of this paper will give an introduction to the goals and implications of the project by comparing it with a similar project one of the authors took part in as a student. Then the paper gives a brief description of the work of the three groups involved, an overview of the methods they employed and the results that were achieved. The main focus will be on the work of the CAAD group . Finally some conclusions are drawn and problems are discussed. The future work includes the testing of the tool by students during the winter term 1993/94.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	09b4
authors	Ismail, Ashraf and McCartney, Kevin
year	1993
title	A Tool for Conceptual Design Evaluation Based on Compliance with Site-Development Briefs and Related Planning Regulations
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.c6i
summary	The need has been established for a computer based decision support tool to use during the conceptual stages of architectural design. The main functions are to check design compliance with the requirements of local planning authorities; characteristics evaluated will include building size, height, plot ratios, circulation and accessibility, and the preservation of natural features on site. This tool is being developed to operate under AutoCAD environment; the construction industry standard computer aided design software, following standard layering convention, integrated command lines, and pull-down menus. In addition to the common graphical output; i.c. plans, elevations and three dimensional models, it will generate textual analysis in report format to use as part of the Environmental Impact Analysis of proposed development. The tool's functions will be based upon the result of two types of field studies. First, interviews and questionnaires will be carried out with architects and planners of both private and public sectors. These will cover issues related to the performance of Computer Aided Architectural Design applications with regard to the evaluation of design schematics, and decision-making for the production of data for environmental statements. Second, field observation and participation will be carried out to observe decision-makers behaviour during assessment of building design proposals. A prototype is currently under development and will be tested against the expectations of the tool designer, Ashraf Ismail, and a team of professionals to be involved in the field studies. A critical analysis of the prototype design methodology and the study findings will be documented in the research thesis to be presented in June 1995.
series	eCAADe
last changed	2022/06/07 07:50

_id	fda4
authors	Jalkanen, Janne
year	2000
title	Building a spatially immersive display - HUTCAVE
source	Helsinki University of Technology, Espoo, Finland
summary	A spatially immersive display is a display that surrounds the user, thus removing or alleviating many disadvantages the common virtual reality systems, such as head-mounted displays have. The most common example of these spatially immersive displays is the CAVE, "CAVE Automatic Virtual Environment", first built at University of Illinois, in 1993. It combines a large field-of-view with high-resolution images and a high frame refresh rate. In this work, the current Virtual Reality (VR) and Virtual Environment (VE) systems are examined, and then the CAVE construction is presented. Principles of stereo vision are explained and current methods of obtaining both autostereoscopic and stereopsis-based vision are reviewed. Aspects of different projection methods, screens, mirrors, projectors, tracking equipment, and computing systems are examined. Also, recent work in CAVE audio, so far neglected in research, is presented. Some of the mathematics is also explained, since in most CAVE-systems some sort of optical folding is necessary. Two cases of CAVE construction are presented, both at the Helsinki University of Technology. The first is a single-wall installation built as a temporary system, and the second is a four-sided CAVE at a new location, superseding the temporary installation. Finally the conclusions are presented, both from the process management point of view, and from the technical point of view, examining the good and bad points of the chosen solutions.
series	thesis:MSc
last changed	2003/02/12 22:37

_id	ddss9217
id	ddss9217
authors	Kim, Y.S. and Brawne, M.
year	1993
title	An approach to evaluating exhibition spaces in art galleries
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	There are certain building types in which movement of people is the most significant evaluation factor. Among these are art galleries and museums. Unlike other building types, which are often explicated by investigating the relationship between people and people, and between people and the built environment, art galleries and museums are a building type in which the social relationship between people hardly exists and peoples movement through space, that is, the functional relationship between people and space, is one of the most significant factors for their description. The typical museum experience is through direct, sequential, and visual contact with static objects on display as the visitor moves. Therefore, the movement pattern of the visitors must exert a significant influence on achieving the specific goal of a museum. There is a critical need for predicting the consequences of particular spatial configurations with respect to visitors movement. In this sense, it is the intention of this paper to find out the relationship between the spatial configuration of exhibition space and the visitors' movement pattern.
series	DDSS
last changed	2003/08/07 16:36

_id	a12b
authors	Kokosalakis, J., Farrow, J. and Spalton, N.
year	1993
title	Introducing 2D Draughting and 3D CAD Modelling into the Information and Library Studies Curriculum in Response to Increasingly Complex Design Requirements of Information Resources
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q0e
summary	This paper describes enhancements to the Information and Library Studies curriculum at the Liverpool John Moores University. In the design process for buildings and space utilised for learning resources informed client involvement is seen as important by the information professional. A new module has been introduced with the aim of providing students with the knowledge and skills to communicate effectively with building design professionals. It is apparent that CAD has a place in this teaching. The programme of study is outlined, including a discussion of significant, relevant examples produced by the CAAD staff of the School of the Built Environment. The teaching methods were drawn from experience in the well established curricula and delivery of CAAD to the architecture and environmental planning students using School of the Built Environment Macintosh hardware and software. From the Aldham Robarts Learning Resource Centre, (presently nearing completion) examples will be shown of animated models, design, organisational and staffing solutions to new technological demands. These include transfer of the Austin - Smith: Lord Intergraph/MicroStation 3D model to Zoom, animation with Electric Image and Theseus and assisting library staff to use ArchiCAD to design and consider shelf planning arrangements for negotiation with the architects. There are interesting lessons to be learned about the advantages of CAD for future client control.
keywords	Information Professional, CAAD, Learning Resource Centre, Open Learning, Information and Library Studies, Curriculum.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	a150
authors	Mahdavi, Ardeshir
year	1993
title	Open Simulation Environments: A “Preference-Based” Approach
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 195-214
summary	This paper introduces in conceptual, algorithmic and implementation terms, the notion of an "open" simulation environment as a "multidirectional" approach to computer-aided performance modelling. A "preference- based" formalization of design intentions/criteria is proposed to cope with the "ambiguity" problem through dynamic control of degrees of freedom of relevant design-related parameters during the interactive design process. A prototypical realization of an open simulation environment called "GESTALT' for simultaneous treatment (parametric manipulation) of various design and performance variables is demonstrated. Some preliminary results of computer-assisted generation of performance-responsive designs are presented.
keywords	Open Simulation Environments, Multidirectional Building Performance Simulation, Form-Function Mapping, Preference-Based Convergence Strategies, Preference-Index
series	CAAD Futures
email
last changed	2003/02/26 17:26

_id	a944
authors	Maher, M.L., Gero, J.S. and Saad, M.
year	1993
title	Synchronous Support and Emergence in Collaborative CAAD
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 455-470
summary	Design is rarely an activity that is commenced and completed by an individual The more common design environment is one in which teams of designers work together towards a final solution. In this paper we consider issues involved in the development of computer-based design environments in which teams of design professionals can collaborate, focusing on the need for visual and underlying representations which can support multiple interpretations. We consider the environment as providing a shared workspace which facilitates both communication and progression of design ideas, concepts, and drawings. In the environment presented here, the shared workspace has two foci: the workspace that designers see and interact with, and the workspace that provides an underlying computer-based representation for persistent memory. The emphasis is on providing representations that support emergence that occurs during collaboration.
keywords	Collaborative Design, Team Design, Multi-User Synchronous CAAD, Shared Representation, Shared Workspace, Emergence
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	8bad
authors	Matalasov, Michael
year	1993
title	Technical Conception of Videosystems Laboratory at Moscow Institute of Architecture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 47-50
summary	The basic point of our conception is not to submit the architect to technical means, but give him freedom of choice and the opportunity to work in the environment closest to the real one. In our situation it means, that we should provide work in real videoinformative space. Thus, our conception of education is to give all the junior students compulsory general information about videosimulation, and to ensure optional more professional work of undergraduates while carrying out their school projects. We consider, that in the architect’s activity simulation (making small-scale models) plays an essential part, because the small-scale model is the first and the only source of true three-dimensional information about the object designed. At the same time videosimulation does not deny or substitute computer-aided design. To get reliable visual information from the model is possible with the help of special technical means equipped with periscopic devices. In Moscow Institute of Architecture this work has been carried out for 10 years.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	a4f8
authors	Monedero, Javier
year	1993
title	Renderings. Some Technical and Non Technical Questions Raised by the Use of Computers in the Visual Analysis of Architecture
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.a5t
summary	It should be expected, in a Congress, that participants bring with them, not only ideas, but also results or, at least, stimulating images. In the Laboratory of Architectural Graphic Techniques at the ETS of Barcelona, we have spent some time generating images directly related with architecture, based on the work of both students and professors. These images have been produced with academic purposes, but also in relation with some works carried out with City Institutions interested in the study of the evaluation of environment visual impact and the role that computers may play in this area. In our previous Congress, in Barcelona, we showed some of these images, obtained by direct digital processing of bitmaps. In another Congress, later, we showed some other images, obtained by rendering, with simple local models (Phong models) and some tricks that helped to make them more realistic. Although I do agree with the old chinese saying that a good image is worth a thousand words, in this case, I have thought more convenient to present a paper that may be read quietly by those interested in these subjects, that might be useful just as it gathers references known by many but grouped in a particular order, and that pretends, respectfully, to criticize the actual situation. This can explain why we consider that the results we have obtained should be improved by new and better techniques and why we think that this dissatisfaction should be shared by others who do not seem to feel the same as we do. The aim of this contribution is, therefore, to reflect on the actual situation and the ways there seem to be open for us to follow.
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: