Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 257

Reformat results as: short short into frame detailed detailed into frame

_id	2864
authors	Isakovic, Tatiana and Fischinger, Matej
year	1993
title	Making Reinforced Concrete Cross-sections Design Easy and Understandable
doi	https://doi.org/10.52842/conf.ecaade.1993.x.d3r
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Modern computing facilities provide an alternative graphical approach to the design of cross-sections. A description of this process might be "strength evaluation", since, for any chosen cross-section, concrete strength, and reinforcement size, location, and yield strength, the flexural resistance (capacity) is defined by the bending moment-axial force interaction diagram. The factored forces are then plotted into the diagram and, by comparing the capacity and demand on the computer screen, the designer can decide about the suitability of the chosen cross-section. If necessary, the cross-sectional properties can be changed easily. There are several advantages of this design approach. The design procedure is fast, clear and economical. For example, all loading combinations for all the columns of the frame in Fig. 1 can be checked simultaneously. The procedure is the same for various shapes of cross-sections and it enables simple reinforcement optimization as well as the typization of cross-sections. For example, only two types of cross-sections can satisfy the design requirements for all the columns in the mentioned frame.
series	eCAADe
last changed	2022/06/07 07:50

_id	37b2
authors	Johansson, P.
year	2000
title	Case-Based Structural Design - using weakly structured product and process information
source	Chalmers University of Technology, Division of Steel and Timber Structures, Publ. S 00:7, Göteborg
summary	Empirical knowledge plays a significant role in the human reasoning process. Previous experiences help in understanding new situations and in finding solutions to new problems. Experience is used when performing different tasks, both those of routine character and those that require specific skill. This is also the case for structural designers. Over 50% of the work done by the designer on a day-to-day basis is routine design that consists of modifying past designs (Moore 1993). That is, most of the design problems that the designer solves have been solved before, in many cases over and over again. In recent years, researchers have started to study if cases (information about specific problem-solving experiences) could be used as a representation of experiential knowledge. Making use of past experience in the form of cases is commonly known as Case-Based Reasoning (CBR). A requirement for Case-Based Design (Case-Based Reasoning applied in design) to be successful is that the design information is computerized. One information type used in structural design that is starting to become computerized is the one in design calculation documents. Such information is weakly structured (which holds for much of the information representing experience) and it contains both product and process information. In this thesis it is shown how the weak structure of this information can be used to subdivide it into components, which in turn makes it possible to apply the object-oriented abstraction principles also to this kind of information. It is also shown how the detailed design process can be represented and how this representation can facilitate automatic acquisition, retrieval of relevant old design information, and adaptation of this information. Two prototypes BridgeBase and ARCADE have been developed, where the principles described above are applied. Using ARCADE, the more general of these two prototypes, it is presented how information in computerized design calculation documents, gathered from real projects, can serve as containers and carriers for both project information and experience. The experience from the two prototypes shows that Case-Based Design can be usable as a tool for structural engineers.
series	other
last changed	2003/04/23 15:14

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	22bc
authors	Randle, Jay
year	1993
title	Light and Form: A Case Study
doi	https://doi.org/10.52842/conf.acadia.1993.021
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 21-38
summary	The first great consideration in design is that the human world is irreducibly phenomenal; we are immersed in the overwhelming richness and sensuousness of the physical environment. And the first great task of design education is to put the student of design into a disciplined awareness of that phenomenal world, by development of categories of discrimination. The introductory experiences bring the student into vivid contact with compelling phenomena. The associated exercises structure and differentiate perception of nuance within these. There is little doubt that texture, surface, extension, value, and color are in one sense basic categories of physical phenomena, constituting in essence a fundamental stratum of experience and the sensible world. Modern psychology and epistemology, however, cohere in saying that this stratum is not the sense world of everyday, the primary datum of the functioning societal member. Neither is the abstract world of the physicist's concepts an everyday world. What is given in our day-to-day life is neither very abstract, nor very concrete, but a sort of functionally-bound middle world of norms and stereotypes. It takes the disciplined seeing characteristic of foundational training in the arts to drive this bourgeois view of physical reality back to elemental sense data. Just as it requires the supremely abstract language of mathematics and the rarified "experience" of modern scientific experimentation to drive that same view offcenter in the direction of abstraction. The first exercises of a program of design education begin to perform the former role.
series	ACADIA
last changed	2022/06/07 08:00

_id	c044
authors	Heisserman, J. and Woodbury, R.
year	1993
title	Generating languages of solid models
source	Proceedings of Second ACM/IEEE Symposium on Solid Modeling and Applications, pp. 103-112
summary	This paper explores the automatic generation of solid models based on a grammatical paradigm. It presents a formalism, boundary solid grammars, for this purpose. Boundary solid grammars allow complex geometric conditions and operations to be expressed using a logical reasoning mechanism, the construction of powerful rules, and the description of grammars for generation of solid models that is appropriate for a variety of design domains. The formalism is well suited to computer implementation, and we demonstrate a prototype interpreter.
series	other
last changed	2003/04/23 15:50

_id	fda4
authors	Jalkanen, Janne
year	2000
title	Building a spatially immersive display - HUTCAVE
source	Helsinki University of Technology, Espoo, Finland
summary	A spatially immersive display is a display that surrounds the user, thus removing or alleviating many disadvantages the common virtual reality systems, such as head-mounted displays have. The most common example of these spatially immersive displays is the CAVE, "CAVE Automatic Virtual Environment", first built at University of Illinois, in 1993. It combines a large field-of-view with high-resolution images and a high frame refresh rate. In this work, the current Virtual Reality (VR) and Virtual Environment (VE) systems are examined, and then the CAVE construction is presented. Principles of stereo vision are explained and current methods of obtaining both autostereoscopic and stereopsis-based vision are reviewed. Aspects of different projection methods, screens, mirrors, projectors, tracking equipment, and computing systems are examined. Also, recent work in CAVE audio, so far neglected in research, is presented. Some of the mathematics is also explained, since in most CAVE-systems some sort of optical folding is necessary. Two cases of CAVE construction are presented, both at the Helsinki University of Technology. The first is a single-wall installation built as a temporary system, and the second is a four-sided CAVE at a new location, superseding the temporary installation. Finally the conclusions are presented, both from the process management point of view, and from the technical point of view, examining the good and bad points of the chosen solutions.
series	thesis:MSc
last changed	2003/02/12 22:37

_id	cf40
authors	Leyh, W.
year	1995
title	Automatic assembly of a commercial cavity block system
source	Automation in Construction 4 (2) (1995) pp. 147-167
summary	In an earlier publication (Leyh, 1993) the "Experiences with the Construction of a Building Assembly Robot" have been dealt with. The application of that robot system for the automatic assembly of commercial cavity blocks is the subject of a subsequent report which consists of two parts: in the first, this paper, we primarily deal with the assembly methods, in the second we deal with their realization. What is characteristic of cavity blocks is the fact that they are at first assembled dry, without cementing material, and the masonry is later filled with mortar. As to their weight and dimension, the cavity blocks used by the company GISOTON are adjusted to the ergonomics of a mason. The entirely different characteristics and abilities of assembly robots are not taken into consideration. However, their dimensional tolerance is relatively small (0.5 mm). Furthermore as cavity bricks, they have conic and oval recesses. Both features are strongly favourable for automation. This paper will highlight specific problems during automized construction assembly with commercial standard assembly elements, and help to solve them.
keywords	Robotics; Assembly methods; Jointing technique; Reference system; Gripper construction
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/06/02 09:36

_id	e9f1
authors	Alaimo, G., Pellitteri, G. and Scianna, A.
year	1993
title	A Tool for Typological Analysis
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q0g
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Any design problem is faced drawing from the architect's knowledge both case knowledge and general knowledge. One type of the latter is abstracted from a multiplicity of cases of which the common features are recognised in such a way as to single out a prototype representing in the best way a class of architectural objects. If applied to a set of residential buildings and to the flats in them the analysis is typological and it is one of the fundamental ways of acquiring general knowledge to be used to face design problems. The tool we present is aimed at such a type of analysis and is based on the idea that it possible to acquire qualitative knowledge through the statistical analysis of measurable characteristics of the examined architectural objects. It has been tested by applying it to the typological analysis of a set of flats of illegal buildings in Sicily. The procedure is organised in two main phases. The first one consists in a series of elaborations performed during the reading of architectural organism; the second one consists in a series of statistical analyses on the results (characteristic variables) of the first.
series	eCAADe
last changed	2022/06/07 07:50

_id	20c1
authors	Alavalkama, Ilkka
year	1993
title	Technical Aspects of the Urban Simulator in Tampere University of Technology
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 35-46
summary	The colour video recording Urban Simulator in TUT was built very early compared with the development of video systems. A contract for planning the simulator electronics, mechanics and camera systems was made in january 1978 with two TUT students: Jani Granholm (computer science and engineering) and Ilkka Alavalkama (machine design and automation). Ease of control and maintenance were asked by side of ”human movement inside coloured small-scale architectural models”. From the beginning, all components of the system were carefully tested and chosen from various alternatives. Financial resources were quite limited, which lead to a long building process and to self-planned and produced mechanical and electronical elements. Some optical systems were constructed by using elements from various manufacturers.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	3653
authors	Alshawi, M. and Budeiri, M.J.
year	1993
title	An Integrated approach for 3D simulation of construction sequence
source	The Int. Journal of Construction IT 1(2), pp. 35-46
summary	In order to eliminate design-related problems and to ease planning difficulties, a new integrated approach is required to manage and present design and construction information. This paper examines the feasibility of integrating design and construction scheduling information produced by 'industry standard' software. It describes the structure of a prototype which has been developed to generate a 3D simulation model for the construction sequence by integrating a CAD package with a project planning software. This study aims at establishing an integrated approach to communicate construction planning graphically to users (designers or construction managers) prior to construction in order to enhance the efficiency of the design/construction process.
series	journal paper
last changed	2003/05/15 21:45

_id	a927
authors	Amirante, Isabella and Bosco, Antonio
year	1995
title	Hypertext Between Research and Teaching: An Experience in a Didactic Building Technology Laboratory
doi	https://doi.org/10.52842/conf.ecaade.1995.003
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 3-12
summary	IPER (hypertext for the knowledge of building patrimony) is the result of a research developed with C.N.R. (National Research Institute). The aim of IPER is to provide the knowledge, the description and the management of one or more historical buildings for public or private institutions. IPER allowed us to improve our methodology of building analysis, covering various disciplinary fields, in two different systems. (1.) the first one, synthetic and suitable for a group of historical buildings, (2.) the second one, complex and particularly made for monumental buildings. // This experience is related to the new regulation of teaching architecture in Italy made in 1993. The main novelty is the introduction of the laboratories with the contemporary presence of two or three teachers of different disciplines, working together with the students on the same project with different approaches. This opportunity allowed us to introduce the "knowledge engineer" as a teacher in the laboratory of building technology. IPER is given to the students with the aim of experimenting and solving the theoretical and practical difficulties that students of different years may encounter in the knowledge and representation of buildings and in the organisation of all the data from the case study.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_1.htm
last changed	2022/06/07 07:54

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	2ff9
id	2ff9
authors	Ataman, Osman
year	1993
title	Knowledge-based Stair Design
doi	https://doi.org/10.52842/conf.acadia.1993.163
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 163-171
summary	The application of computer--based technique to support architectural design has often concentrated on matters of representation. Typically, this means computer-aided drafting, and less frequently, computer-aided modeling and visualization. The promise of new computer-based tools to support the process of design has thus far failed to produce any significant tool that has had a widespread impact on the architectural profession. Most developments remain in university based research labs where they are used as teaching instruments in CAD courses or less often in design studios. While there are many reasons for this lack of dissemination, including a reluctance on the part of the architectural profession itself, the primary obstacles deal with difficulties in explicating design knowledge, representing this knowledge in a manner that can be used for design, and providing an intuitive and effective user interface, allowing the designer to easily use the tool for its intended purpose. This study describes a system that has been developed to address a number of these issues. Based on research findings from the field of Artificial Intelligence which expounds on the need for multiple techniques to represent any complex area of knowledge, we have selected a particular approach that focuses on multiple techniques for design representation. We review this approach in depth by considering its many facets necessary when implementing a knowledge-based system. We then partially test the viability of this approach through a small case study, implementing a knowledge-based system for designing stairs. While this effort only deals with a small part of the total design process, it does explore a number of significant issues facing the development of computer-based design assistants, and suggests several techniques for addressing these concerns.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	50ce
authors	Baker, R.
year	1993
title	Designing the Future: The Computer Transformation of Reality
source	Thames and Hudson, Hong Kong
summary	A coffee table book on computer applications? Well, yes, because it does deal largely with matters of graphic design in architecture, fashion and textiles, painting, and photography; but it also has items which might be of interest in its sections on digital publication, typography, and electronic communication in general. It also seeks to discuss the way in which these applications may force us to change the way we think. Robin Baker writes in an unfortunately stiff and abstract manner about the impact computer programmes have had on the world of art and design, but the graphic images and extended picture captions help to keep the reader awake - even though the main text sometimes disappears for two or three double page spreads on end. There are also smatterings of pretentious art-world-speak about 'solving certain spatial problems' (in the design of curtain fabrics or teapots) and the introduction (inevitable?) of new jargon: 'shape grammar'(a list of so-called shape 'rules'), 'repurposing' (putting somebody else's work to new use) and 'genetic algorithms' (sculptural designs based on re-processed organic shapes - most of which look like stomach tumours). In his favour, Baker very generously credits students and commercial designers who have produced the effects he describes and illustrates so well. For writers, he sketches in the possibilities of Hypertext and Hypermedia and points to the future of Hyper publishing which he (and Rupert Murdoch)believes will be with us before the end of the century. He seems to have a good oversight of what is possible and practicable - though one wonders how up-to-date the view is when his book may have begun its life anything up to three years ago. He usefully points out that much new technology exists in or drags along with it the forms of earlier periods - so that in an age of electronic communication we still have printed books as a dominant cultural form. Maybe this is as it should be - but Baker makes a persuasive case for the claim that All This is Going to Change.
series	other
last changed	2003/04/23 15:14

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	0c88
authors	Bedell, John R. and Kohler, Niklaus
year	1993
title	A Hierarchical Model for Building Applications
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 423-435
summary	Advanced computer-aided architectural applications must model buildings as multi-level compositions supporting distinct points of view. Hierarchies of encapsulated, autonomous elements can be derived from ISO-STEP's General AEC Reference Model and configured for various applications. For analysis of life-cycle costs, we define a Pyramid of evaluable production steps leading to the final building; for optimization of renovation task schedules, a topological model of access paths and traffic flow. These separate viewpoints can be embedded in a single unifying structure permitting the communication and propagation of changes among its specialized aspects.
keywords	Design Model, Decision Support System, Object-Oriented Data Model, Building Product Model, STEP-GARM
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	0ffe
authors	Bhat, R.R., Gauchel, J. and Van Wyk, S.
year	1993
title	Communication in Cooperative Building Design
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 481-493
summary	This paper addresses communication issues, which are crucial in any implementation of distributed design environments. Communication needs are specified and implemented in a prototype based on a modular knowledge-based approach for simulation of a distributed multi-user system. The results of these simulations are reported, which show communication to be scalable as the numbers of applications and the size of the design increases. Finally, the implications of the results on real distributed systems are discussed.
keywords	Building Design, Distributed Design Environments, Cooperative Design, Communication
series	CAAD Futures
last changed	2003/11/21 15:16

_id	ee23
authors	Bille, Pia
year	1994
title	A Study of Color
doi	https://doi.org/10.52842/conf.ecaade.1994.185
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 185-190
summary	Color courses are traditionally based on exercises carried out with either water color or colored paper. Use of the computer as a tool for teaching color theory and analyzing color in architecture was the topic of a course given at the School of Architecture and Planning at the State University of New York at Buffalo, USA where I was an exchange faculty in the academic year 1993/94. The course was structured into 3 topics: color theory, color perception and application of color.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	6858
authors	Bosselmann, Peter and Gilson, Kevin
year	1993
title	Visualizing Urban Form
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 9-30
summary	This article is about the use of visual simulation by urban designers. We explore briefly the history of simulation from its origins in the 1960s in the United States, explain guidelines for its application in urban design and planning projects, and discuss in greater detail how new simulation techniques might be integrated into design instruction and practice.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	0e89
authors	Bradford, J.W., Cheng, N. and Kvan, Thomas
year	1994
title	Virtual Design Studios
doi	https://doi.org/10.52842/conf.ecaade.1994.163
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 163-167
summary	Beginning in 1993, small groups of students of architectural design at different institutions around the world participated in collaborative design projects using a variety of tools, including CAD, Internet and teleconferencing. This programme, known as the "Virtual Design Studio" (VDS), allows students to work collectively with colleagues from different cultures and climates who are thousands of kilometres and in different time zones. Most recently, in February 1994, four institutions in N. America, one in Europe, and one in S E Asia participated in VDS’94. This paper explains the operation of the VDS and explores the future of the VDS as a potential tool for architectural design education. In particular, we review what we have learned in employing computer tools to extend the teaching in design studios into a "virtual" experience.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

For more results click below: