Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 247

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9213
id	ddss9213
authors	Shabha, G.S.
year	1993
title	Development of objective methods for measuring flexibility of school buildings
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This research investigates many problems related to the design for change and flexibility of school buildings. The problem of change proves to be highly complex due to the unpredictability and the difficulty of measuring change. Many deficiencies have been identified in the previous methods concerning lack of indicators for measuring flexibility, reliability and insufficiency of data for indicating change in buildings over use. In the light of the above problems, two main objectives have been established: (i) to propose operational measures of the extent of incorporation of design variables in school designs, and (ii) to propose operational measures of the extent of flexibility of school buildings in use. However, due to the limitations this paper is bound to, the investigation will focus on the second objective. It is anticipated that such operational measures might provide a framework for both architects and researchers, during the early design stage, to ensure that their conjectures about the potential of flexibility might be enhanced during use; hence, improving their prediction of buildings performance over use. This might assist in developing a more coherent objective body of knowledge, which could be fruitfully manipulated during the early design stage to enhance the effectiveness of flexibility in use.
series	DDSS
last changed	2003/08/07 16:36

_id	c207
authors	Branzell, Arne
year	1993
title	The Studio CTH-A and the Searching Picture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 129-140
summary	What happens during an architect’s search for the best solution? How does he (or she) begin, which tools are chosen, what happens when he comes to a standstill? The activities – sketching, discussions with other people, making models, taking walks to think, visits to the library, etc? What is an ordinary procedure and what is more specific? Do the tools have an impact on the final solution chosen? What happens during periods of no activity? Are they important? In which fields of activities are signs of the searching process to be found? In other words — what is the process of creative thinking for architects? Mikael Hedin and myself at Design Methods, Chalmers University of Technology, have started research into architects’ problem-solving. We have finished a pilot study on a very experienced architect working traditionally, without Cad (”The Bo Cederlöf Case”). We have started preliminary discussions with our second ”Case”, an architect in another situation, who has been working for many years with Cad equipment (Gert Wingårdh). For our next case, we will study a third situation – two or more architects who share the responsibility for the solution and where the searching is a consequence of a dialogue between equal partners. At present, we are preparing a report on theories in and methods for Searching and Creativity. I will give you some results of our work up till now, in the form of ten hypotheses on the searching process. Finally, I would like to present those fields of activity where we have so far found signs of searching. Our approach, in comparison with earlier investigations into searching (the most respected being Arnheim’s study on Picasso’s completion of the Guernica) is to collect and observe signs of searching during the process, not afterwards. We are, to use a metaphor, following in the footsteps of the hunter, recording the path he chooses, what marks he makes, what tools, implements and equipment he uses. For practising architects: a better understanding of what is going on and encouragement to try new ways of searching, for architectural students: better preparation and training for problem solving. It all began while we compared the different objects in our collection of sketches at the Chalmers STUDIO for Visualisation and Communication. (For some years, we have been gathering sketches by Alvar Aalto, Jorn Utzon, Ralph Erskine, Erik and Tore Ahlsén, Lewerenz, Nyrén, Lindroos, Wingårdh and others in a permanent exhibition). We observed similarities in these sketches which allowed us to frame ten hypotheses about the searching process.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	ca14
authors	Gavin, Lesley
year	1993
title	Generative Modelling and Electronic Lego
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q8a
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	This paper shows work exemplifying the further extent of computer capabilities in the field of design. The work stems from a belief that for computers to be used effectively within the architectural profession their utility must stretch far beyond the process of description of geometric data, but be incorporated in the fundamental roots of design: that of conceptual design. Computers can be used to access the knowledge we have and then formulate this knowledge into a working language of design. Computers can be used to generate space and form in accordance with any relationship the designer may choose to set. This allows them to be used from the very conception of design. It is only by working from the very beginning, the very basis of the design of a building that we can fully develop the integration of computers in the construction industry. The work undertaken sets out primarily to explore one of the ways computers could be used in the field of architectural design. In recognition that an important byproduct of any design search is the enhanced understanding of the problem itself, the work was directed towards a particular project. This allowed each stage of thought to be to be considered as it arose and subsequently incorporated into the design model. The work does not attempt to automise the design process but simply tries to explore some of the opportunities offered by computers and see if they can be easily incorporated into the design process offering design solutions that may not otherwise have been considered. The exploration resulted in a simple design process model that incorporates the more accessible and useful aspects of computer technology.
keywords	Generative Modelling, Rule Based Form, Random Factors, Shape Grammars
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cd6f
authors	Gero, John S. and Yani, Min
year	1993
title	Discovering Emergent Shapes Using a Data-Driven Symbolic Model
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 3-17
summary	This paper presents a model for discovering emergent shapes based on the concept of shape hiding and data-driven search. It is founded on representing polyline bounded shapes using infinite maximal lines, an extension of the concept of maximal lines. A process model of shape emergence is presented and a number of examples given which demonstrate the utility of both the representation and the model.
keywords	Shape, Emergence, Symbolic Model, Data-Driven Search
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	ee51
authors	Glanville, Ranulph
year	1993
title	Exploring and Illustrating
doi	https://doi.org/10.52842/conf.ecaade.1993.x.l5o
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	CAD, in its usually available forms, is wonderful at illustrating proposed architectural objects. But, as I argued last year at the Barcelona meeting, it is not so good at helping us extend the richness and development of architectural ideas—at the "back of envelope" and other developmental Ievels—indeed, it is (for pragmatic reasons—and others) actually restrictive of change, what-if, suck-it-and-see, etc. I shall describe a work environment, which we have been developing since last year in Portsmouth, in which computing is used by students to assist the generation, testing and extension of ideas: in which exploring takes precedence over illustrating. The central notion of this environment involves the extension and manipulation, through co-operative sharing of a joint "resource base" of computer stored images (recognising origination rather than ownership), and (parts of) which may be copied and transformed by group members as they seek to develop, enrich and extend their ideas. Transformations may be intentional, but some occur through the limits of our computational medium such as compression losses, file formats, colour depth and resolution and are welcomed as a contribution made by the computing medium used. Images are located through a developing, shared filing system, picture search and history trace. The environment relies on a small suite of computers wile a powerful machine acting as a fileserver and undertaking central, computationally-intensive tasks. For this environment, we have chosen software carefully, and the choice will be described. We have also developed a small, but crucial program that traces developments in the shared resource base—in what is, in effect, our own, operational CyberSpace (as distinct from a Virtual Reality). Through these mechanisms, we believe we are able to evade the limitation set by Ross Ashby's "Law of Requisite Variety", thus expanding the creativity-base of participating designers (students). There are no "scientific results", but we believe the reasoning behind, and the activity and exploration of our environment is valuable in itself, and may be of interest to collegues.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddssup9613
id	ddssup9613
authors	Kulkarni, R.G., Stought, R.R. and Haynes, K.E.
year	1996
title	Traffic Flow Landscapes
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Major metropolitan areas and constituent independent jurisdictions face the problem of providing efficient transportation for their residents and in-and out commuters. A typical trip taker spends considerable time on the road to reach the workplace and other destinations. Though it may seem counter-intuitive, adding more links to existing road networks and/or increasing traffic capacity by adding lanes does not necessarily decrease travel times (eg. Braess' paradox). But it is certain that a dense redundant network of roads would provide a trip taker with alternate routes when traffic incidents occur. These types of questions raise the question of, how to evaluate the flow characteristics of the entire road network of a jurisdiction and its larger region in keeping the traffic moving? Further, how may the impact of adding more links/ lanes or the blocking of existing links! lanes be best measured? To answer these and related questions, we propose a methodology to evaluate a fitness criteria for road networks based on Kauffman's biological NK model (1993). We specify a transportation road traffic flow landscape analogous to the fitness landscape of the NK model. Using the transportation road traffic flow landscape we derive a road fitness index that can be used to evaluate either the entire road network's traffic flows or subparts of such network's traffic flows. We explore the possibility of investigating traffic flow landscapes to search for optimal routes to clear traffic. Finally we describe an approach for applying the theoretical framework developed in the paper to the traffic conditions on the road network of the city of Fairfax, Virginia.
keywords	Fitness Landscapes, NK Model, Genotype, Gene, Self-Organization, ITS Technology
series	DDSS
last changed	2003/08/07 16:36

_id	4a5f
authors	Liu, Yu-Tung
year	1993
title	Recognizing Emergent Subshapes in Design Problem Solving: A Connectionist Investigation
doi	https://doi.org/10.52842/conf.acadia.1993.131
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 131-139
summary	Human problem-solving behavior has been modelled as a search through the space as defined as problem states, within which earlier states move to subsequent ones by applying rules in the human mind until the goal state is found. This cognitive model of problem-solving has been broadly accepted and has become dominant in both cognitive psychology and artificial intelligence (AI). In the field of computeraided architectural design (CAAD), search models are also widely used for solving design problems, although various foci of design knowledge are differently represented by shape grammars, graphs, and knowledge-based systems using predicate logic for different purports. In design search, design evolves from one state to another by exhaustively or heuristically applying proper rules. Each rule application involves, first, pattern-matching the antecedent of a rule to the current state and, second, transforming the matched portion of that state into the consequence of the rule. However pattern-matching techniques of current CAAD systems are still limited. In current CAAD systems, only those two squares can be dealt with by patternmatching for further development. However, a human designer can effortlessly recognize not only those two but other emergent subshapes, for example a smaller square in the middle where the two squares overlap and two L-shapes in the corners. Therefore a human designer can thoroughly deliberate all these alternatives before making a decision. In other words, human designer is capable of restructuring shapes in terms of emergent subshapes in any step of designing.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	c308
authors	Ohno, Ryuzo and Hata, Tomohiro
year	1993
title	The Effect of Spatial Structure on Visual Search Behavior
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 89-98
summary	People’s voluntary movement through an environment is essential for their comprehension of three dimensional space. It may be hypothesized that they move and look around in order to pick up wanted information at the time. This study investigated the following more specific hypotheses by an experiment using a user-controlled space-sequence simulator and the analysis of the subjects’ behavioral data recorded by the simulation system: (1) The strategy of visual search behavior (body movement and viewing direction) is influenced by spatial structure (form and organization). (2) The strategy can be explained by the amount of visual information in the environment, i.e., people move and look in a certain direction in order to maximize effective information at a given moment and position. - If these hypotheses are supported, we can predict people’s behavior in an unfamiliar place on the basis of the spatial structure.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	8f1f
authors	Oxman, Rivka and Oxman, Robert
year	1993
title	Precedents: Memory Structure in Design Case Libraries
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 273-287
summary	The paper presents an approach to a memory structure of design ideas in a library of design precedents. A model of case memory for design is developed. The model is composed of distinct chunks of knowledge called design stories. A formalism for the design story is proposed which represents the linkage between design issue, concept and form in stories. Stories are structured in memory according to a semantic network. The lexicon of the semantic network acts as a memory index. The memory structure and indexing system are demonstrated to enhance search and to support crosscontextual browsing and exploration in the precedent library. The approach is demonstrated in a pilot design aid system in the task domain of early conceptual design in architecture.
keywords	Knowledge-Based Systems, Case-Based Reasoning, Case-Based Design Aids Systems, Precedents, Electronic Libraries, Memory Organization, Indexing, Storage, Retrieval, Hypermedia Systems, Content Analysis
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	32f1
authors	Palmer, J., Ames, C.T. and Lindsey, D.T.
year	1993
title	Measuring the effect of attention on simple visual search
source	Journal of Experimental Psychology: Human Perception and Performance 19(1) 108-130.
summary	It is unclear to what extent attention affects perception rather than memory and decision. Is all of perception limited by attention, or is perception completely preattentive, and attention only affects memory and decision, or some compromise? The answer is in your definitions of these phenomena. Visual search task: display set size The display set size increases response time and/or response accuracy. This is a putative example of divided attention in the literature. The goal of this paper is to be more rigorous in studying this setsize phenomena, and try and decouple attention on perception Display set size: The total number of stimuli in an experiment. Relevant set size: Total number of 'cued' stimuli in an experiment.
series	journal paper
last changed	2003/04/23 15:50

_id	078e
authors	Papazian, Pegor
year	1993
title	Incommensurability of Criteria and Focus in Design Generation
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 111-125
summary	An approach to developing design systems is presented, informed by the recognition that design criteria are incommensurable. The degree to which an artifact satisfies one criterion cannot be compared to the degree to which it satisfies another. Given this principle, it is not valid to combine different "scores " given to independent features in an evolving design into a global evaluation function. The design framework proposed here represents an alternative to the traditional approaches for combining independent criteria and organizational principles. It is based on the opportunistic nature of designing, the multiplicity of semantics active in a design session, and the dynamics of focus and distraction. By way of illustrating both this characterization of designing and the abstract computational framework on which it is based, a simple system for arranging blocks according to a set of formal massing principles is presented. The massing generator has some important properties that other systems lack, such as dynamism, robustness and the ability to deal with partial designs. Through a comparison with some artificial intelligence methods such as production systems and search, the proposed framework is used as a guideline for developing design systems. This paper focuses on designing as an activity, rather than engaging in an analysis of finished designs with the hope of capturing their syntactic properties. Thus the stress is placed on the generator's behavior, by giving examples of how it converges on a series of design alternatives in a dynamic fashion, avoiding oscillations and blocks.
keywords	Design, Criteria, Opportunism, Focus, CAD
series	CAAD Futures
last changed	1999/04/07 12:03

_id	08e5
authors	Turk, Ziga
year	1993
title	A Network Based Collaboration Framework
doi	https://doi.org/10.52842/conf.ecaade.1993.x.h7a
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Three roles have been used to describe the relation of computers to the architectural design process - assistant, tool and media. Electronic data exchange over wide area networks raises the importance of the media role. The rapid development of telecommunications demand that students of engineering and architectural professions get acquainted with technology that is being made available. The paper will introduce the possibilities that are provided by the electronic networks for collaboration, information search and retrieval - not only in the scope of research but for the purposes of curricula as well. It will introduce value added networks, analyze possibilities for engineers and architects, enumerate inexpensive or free tools that can be used to enter the electronic village and describe an information server that can disseminate local knowledge to the network community.
series	eCAADe
email
more	http://www.fagg.uni-lj.si/~zturk/
last changed	2022/06/07 07:50

_id	cecc
authors	Woodbury, Rob and Griffith, Eric
year	1993
title	Layouts, Solids, Grammar Interpreters and Fire Stations
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 75-90
summary	This paper is presented in three main parts. First, it reports the results of an effort to combine two representations (layouts and solid models) within a single generative framework. Second, it describes fire stations as a building type and reports a phased grammar that embodies information about the type and generates fire station designs likely to be members of the type. Third, it describes a useful way of controlling grammatical generation via interactive decisions on rule application, hierarchical decomposition of designs, and ordering of the conflict set of rule instantiations.
keywords	Fire Station, Layout, Generative System, Search, Solid Modeling, Spatial Grammar
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	e9f1
authors	Alaimo, G., Pellitteri, G. and Scianna, A.
year	1993
title	A Tool for Typological Analysis
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q0g
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Any design problem is faced drawing from the architect's knowledge both case knowledge and general knowledge. One type of the latter is abstracted from a multiplicity of cases of which the common features are recognised in such a way as to single out a prototype representing in the best way a class of architectural objects. If applied to a set of residential buildings and to the flats in them the analysis is typological and it is one of the fundamental ways of acquiring general knowledge to be used to face design problems. The tool we present is aimed at such a type of analysis and is based on the idea that it possible to acquire qualitative knowledge through the statistical analysis of measurable characteristics of the examined architectural objects. It has been tested by applying it to the typological analysis of a set of flats of illegal buildings in Sicily. The procedure is organised in two main phases. The first one consists in a series of elaborations performed during the reading of architectural organism; the second one consists in a series of statistical analyses on the results (characteristic variables) of the first.
series	eCAADe
last changed	2022/06/07 07:50

_id	855d
authors	Alavalkama, I., Aura, S. and Palmqvist H. (Eds.)
year	1993
title	Endoscopy as a Tool in Architecture
source	Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3 / Tampere (Finland), 25-28 August 1993, 196 p.
summary	The European Architectural Endoscopy Association was established in connection with the Association’s first international conference on August 25-28, 1993, which was hosted by the Department of Architecture at the Tampere University of Technology. The purpose of the EAEA is to promote experimentation, research, communication, exchange of experiences, collaboration, user participation and teaching in the field of endoscopy and environmental simulation. The first EAEA conference was attended by 25 people from 15 different universities. Working under the general heading of “Endoscopy as a Tool in Architecture”, the conference had three specific themes for the first three days: Review of Existing Laboratories; Theories, Methods and Applications; and the Future of Endoscopy. In this volume we have compiled all the papers that were presented at the conference. The texts have been printed in the form we received them, without any attempt to edit them for consistency in style, adding hopefully to a sense of authenticity. Unfortunately, the impressive videos we saw at the conference on the possibilities of endoscopy and environmental simulation as a tool in architecture, cannot be documented here.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	20c1
authors	Alavalkama, Ilkka
year	1993
title	Technical Aspects of the Urban Simulator in Tampere University of Technology
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 35-46
summary	The colour video recording Urban Simulator in TUT was built very early compared with the development of video systems. A contract for planning the simulator electronics, mechanics and camera systems was made in january 1978 with two TUT students: Jani Granholm (computer science and engineering) and Ilkka Alavalkama (machine design and automation). Ease of control and maintenance were asked by side of ”human movement inside coloured small-scale architectural models”. From the beginning, all components of the system were carefully tested and chosen from various alternatives. Financial resources were quite limited, which lead to a long building process and to self-planned and produced mechanical and electronical elements. Some optical systems were constructed by using elements from various manufacturers.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	d6a3
authors	Alkhoven, Patricia
year	1993
title	The Changing Image of the City
source	University of Utrecht
summary	The image and structure of a town are constantly subject to a dynamic process of change and continuity. Visual material, such as photographs, historical maps, town plans, drawings and prints, show us the impact of these changes on the image of a town. The main point of departure of this study stems from the question of how this process of change and continuity is visually detectable in a town or city. The fact that the ideas about the appearance of a city (gradually) change, can be read from the often subtle changes in the townscape. Though in many cases we have a general knowledge of the choices made in urban management, the most difficult problem is to detect the underlying decisions. This raises the question to what extent these changes and also the continuities are the result of deliberate choices in urban management and to what extent they are autonomous developments in the townscape resistant to interventions. Using different kinds of visual information as a basis, computer visualization techniques are used in the present study to examine some cartographic maps and to reconstruct the urban development in the twentieth century of the town of Heusden three-dimensionally in significant phases. The resulting visualization provides us with a tool for a better understanding of the dynamics of urban transformation processes, typologies and morphological changes and continuities.
keywords	3D City Modeling
series	thesis:PhD
email
more	http://www.library.uu.nl/digiarchief/dip/diss/01754573/hfdheus.htm
last changed	2003/05/15 21:36

_id	3653
authors	Alshawi, M. and Budeiri, M.J.
year	1993
title	An Integrated approach for 3D simulation of construction sequence
source	The Int. Journal of Construction IT 1(2), pp. 35-46
summary	In order to eliminate design-related problems and to ease planning difficulties, a new integrated approach is required to manage and present design and construction information. This paper examines the feasibility of integrating design and construction scheduling information produced by 'industry standard' software. It describes the structure of a prototype which has been developed to generate a 3D simulation model for the construction sequence by integrating a CAD package with a project planning software. This study aims at establishing an integrated approach to communicate construction planning graphically to users (designers or construction managers) prior to construction in order to enhance the efficiency of the design/construction process.
series	journal paper
last changed	2003/05/15 21:45

_id	a927
authors	Amirante, Isabella and Bosco, Antonio
year	1995
title	Hypertext Between Research and Teaching: An Experience in a Didactic Building Technology Laboratory
doi	https://doi.org/10.52842/conf.ecaade.1995.003
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 3-12
summary	IPER (hypertext for the knowledge of building patrimony) is the result of a research developed with C.N.R. (National Research Institute). The aim of IPER is to provide the knowledge, the description and the management of one or more historical buildings for public or private institutions. IPER allowed us to improve our methodology of building analysis, covering various disciplinary fields, in two different systems. (1.) the first one, synthetic and suitable for a group of historical buildings, (2.) the second one, complex and particularly made for monumental buildings. // This experience is related to the new regulation of teaching architecture in Italy made in 1993. The main novelty is the introduction of the laboratories with the contemporary presence of two or three teachers of different disciplines, working together with the students on the same project with different approaches. This opportunity allowed us to introduce the "knowledge engineer" as a teacher in the laboratory of building technology. IPER is given to the students with the aim of experimenting and solving the theoretical and practical difficulties that students of different years may encounter in the knowledge and representation of buildings and in the organisation of all the data from the case study.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_1.htm
last changed	2022/06/07 07:54

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

For more results click below: