Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 255

Reformat results as: short short into frame detailed detailed into frame

_id	d6a3
authors	Alkhoven, Patricia
year	1993
title	The Changing Image of the City
source	University of Utrecht
summary	The image and structure of a town are constantly subject to a dynamic process of change and continuity. Visual material, such as photographs, historical maps, town plans, drawings and prints, show us the impact of these changes on the image of a town. The main point of departure of this study stems from the question of how this process of change and continuity is visually detectable in a town or city. The fact that the ideas about the appearance of a city (gradually) change, can be read from the often subtle changes in the townscape. Though in many cases we have a general knowledge of the choices made in urban management, the most difficult problem is to detect the underlying decisions. This raises the question to what extent these changes and also the continuities are the result of deliberate choices in urban management and to what extent they are autonomous developments in the townscape resistant to interventions. Using different kinds of visual information as a basis, computer visualization techniques are used in the present study to examine some cartographic maps and to reconstruct the urban development in the twentieth century of the town of Heusden three-dimensionally in significant phases. The resulting visualization provides us with a tool for a better understanding of the dynamics of urban transformation processes, typologies and morphological changes and continuities.
keywords	3D City Modeling
series	thesis:PhD
email
more	http://www.library.uu.nl/digiarchief/dip/diss/01754573/hfdheus.htm
last changed	2003/05/15 21:36

_id	6858
authors	Bosselmann, Peter and Gilson, Kevin
year	1993
title	Visualizing Urban Form
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 9-30
summary	This article is about the use of visual simulation by urban designers. We explore briefly the history of simulation from its origins in the 1960s in the United States, explain guidelines for its application in urban design and planning projects, and discuss in greater detail how new simulation techniques might be integrated into design instruction and practice.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	e92c
authors	Dave, Bharat
year	1993
title	A Computer-Assisted Diagramming System
source	Swiss Federal Institute of Technology, ETH Zurich
summary	This research investigates characteristics and generation of graphic diagrams used in support of analysis, presentation and synthesis of information in various domains. The research is aimed at the development of a software system which can be used to specify, generate and manipulate diagrams similar to the way they are represented and operated upon in traditional media.Diagrams are graphic representations of symbolic propositions that allow tentative reasoning and inferencing, and enable a person to focus on selected aspects of a situation that are deemed of interest. The economy and directness of expression found in diagrams seem to be the prime reasons why they are so ubiquitous in many domains. Despite these advantages, studies into supporting diagrammatic representations using computers are rather sparse. This research is an attempt at developing a comprehensive framework of thought in this direction.In the context of design disciplines like architecture, this research forms a part of the continuum of studies in computer aided design techniques and tools. While a large number of tools and techniques in CAD have emerged so far, usage of such tools, due to their underlying representations, expects and demands commitment of too many details too early in the design process. This research is aimed at characterizing and developing a computer based diagramming system to support tentative reasoning using diagrams, and thus hopes to extend the scope of CAD environments in design.The thesis first articulates motivations for this topic in detail. Next, a discussion on the role played by diagrams as conceptual tools in various domains is presented. It is followed by a detailed look at characteristics and components of diagrams viewed as a graphic communication system. Next, a comprehensive set of requirements for an ideal software environment for diagramming tasks is developed. A prototype system called CDT was implemented and is used to demonstrate ideas developed in this research. The study concludes with some observations on contributions of this research effort and possible future extensions.
series	thesis:PhD
email
last changed	2003/05/10 05:43

_id	ac20
authors	Lyons, Arthur and Doidge, Charles
year	1993
title	Understanding Structural Movement Joints with CAAD Animation
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.p3d
summary	The well-established use, as an architectural design tool, of computer graphics using 'fly-through' techniques gives a highly visual overview of design concepts and may additionally illustrate certain specific details, but it cannot show their time-dependent dynamic function. This paper describes and illustrates how CAAD animation can be used to analyse not only structural philosophy but also the dynamic effects of nonstatic loading and thermal movement, thus leading to a better understanding of the design criteria applied in certain elegant solutions. The CAAD video animations illustrate the structural philosophy relating to the facade of the refurbished Bracken House, London and the dynamic operation of key movement junctions within Stansted Airport and East Croydon Railway Station.
keywords	Structure, Movement Joints, Animation, Video
series	eCAADe
last changed	2022/06/07 07:50

_id	maver_071
id	maver_071
authors	Mathur, K. and Maver, T.W.
year	1993
title	Information Technology in the Management of Design and Construction
source	Management of Information Technology for Construction (Ed: K Mathur et al) World Scientific, 585-594
summary	This paper provides an overview of the developments in Information Technology (IT) and its impact on the Architecture, Engineering and Construction (AEC) industry. It takes note of what has transpired in the last two decades and how the evolution of this subject corresponds to the predictions which had been made at various times in the past. It concludes that changes in procedures, processes and structure of organisations are needed if the most effective use of IT is to be achieved, and it is timely to go beyond solutions which mimic and automate current processes. Strategic frameworks must be defined within which new solutions will emerge rather than specific technical solutions for individual design or automation tasks. Concurrent changes in the AEC professions and the management of projects and organisations will be required to support the new tools and techniques offered by IT. Thus no promises should be made purely on the basis of emerging technologies. Hence the paper makes no attempt to predict the future of the AEC industry even though integrated systems may become available to support creative, cooperative, multi-disciplinary design, and though such systems will assist construction automation tasks, maintenance and facility management.
series	other
type	normal paper
email
last changed	2015/02/20 11:30

_id	a4f8
authors	Monedero, Javier
year	1993
title	Renderings. Some Technical and Non Technical Questions Raised by the Use of Computers in the Visual Analysis of Architecture
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.a5t
summary	It should be expected, in a Congress, that participants bring with them, not only ideas, but also results or, at least, stimulating images. In the Laboratory of Architectural Graphic Techniques at the ETS of Barcelona, we have spent some time generating images directly related with architecture, based on the work of both students and professors. These images have been produced with academic purposes, but also in relation with some works carried out with City Institutions interested in the study of the evaluation of environment visual impact and the role that computers may play in this area. In our previous Congress, in Barcelona, we showed some of these images, obtained by direct digital processing of bitmaps. In another Congress, later, we showed some other images, obtained by rendering, with simple local models (Phong models) and some tricks that helped to make them more realistic. Although I do agree with the old chinese saying that a good image is worth a thousand words, in this case, I have thought more convenient to present a paper that may be read quietly by those interested in these subjects, that might be useful just as it gathers references known by many but grouped in a particular order, and that pretends, respectfully, to criticize the actual situation. This can explain why we consider that the results we have obtained should be improved by new and better techniques and why we think that this dissatisfaction should be shared by others who do not seem to feel the same as we do. The aim of this contribution is, therefore, to reflect on the actual situation and the ways there seem to be open for us to follow.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	96a9
authors	Mullet, Kevin and Sano, Darrell
year	1993
title	Applying Visual Design: Trade Secrets for Elegant Interfaces Tutorials
source	Proceedings of ACM INTERCHI'93 Conference on Human Factors in Computing Systems -- Adjunct Proceedings 1993 p. 230
summary	Objective: This tutorial is designed to increase the participant's awareness of visual and aesthetic issues and provide practical techniques (not guidelines) for achieving elegant user interfaces, information displays, and data visualisations. The emphasis is on avoiding a number of mistakes seen repeatedly in commercial products. Content: This tutorial will focus on the core competencies or "tricks of the trade" that all visual designers internalise as part of their basic training. The tutorial is organised not along the traditional graphic design specialisations, such as typography or colour, but according to the design goals and familiar problems of real-world product development. Specific content areas will include elegance and simplicity; scale, contrast and proportion; organisation and visual structure; module and programme; image and representation; and style. The communication-oriented design aesthetic seen in graphic design, industrial design, and architecture can be applied very successfully to graphical user interfaces, data displays, and multimedia. Design rules provided will be illustrated with extensive visual examples drawn from the international design communities as well as from the HCI domain.
series	other
last changed	2002/07/07 16:01

_id	0f50
authors	Skauge, Jørn
year	1993
title	An Electronic Tool for Urban Design Analysis
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 77-85
doi	https://doi.org/10.52842/conf.acadia.1993.077
summary	Architects and urban designers are increasingly using computers in their attempt to improve decision making in urban design. Most existing systems emphasize hard data such as statistics, land use data, etc. In recent years with the use of more powerful computers we have seen a greater emphasis on managing visual data. Computer systems are being used to generate urban models and simulations of the various kinds of impact new developments have on the existing cityscape. This project emphasizes the use of visual data. The purpose of the research has been to develop a computer system for urban designers to use in analyzing urban architectural qualities. Therefore this project focuses on applying traditional methods and theories of urban designers rather than developing new computer techniques. The traditional methods and theories of urban designers fall within the category which the French theorist Francoise Choay calls Pre-urbanism and Urbanism - the Cultural Model. Theorists within this category include Camillo Sitte, Gordon Cullen, Kevin Lynch, Leon Krier, Aldo Rossi, Michael Trieb, Roger Tranzick and Thiis-Evensen. This computer system has been developed as a prototype in order to gain experience and knowledge for future development of a large system. Later development will be based upon a vectorized threedimensional model of a whole city using texture mapping and tracing techniques to annotate important architectural features. The computer system consists of the basic analysis module supplied with a simulation unit and a theory unit. With this analytical tool, analysis is conducted on three different urban scales. The prototype has been developed on the Macintosh computer with SuperCard as the authoring tool. The computer system was developed as a prototype for Danish Urban Designers and is currently being tested in conjunction with the city of Viborg, Denmark. ( population 55,000). Located in Jutland, Viborg was the capital of Denmark around the year 1000. It now functions as a center for regional government. Viborg was selected as the test site because of its historical core.
series	ACADIA
last changed	2022/06/07 07:56

_id	a0c6
authors	Vanier, Dana J.
year	1993
title	Minicode Generator: A Methodology to Extract Generic Building Codes
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 225-239
summary	This paper describes work in progress. It summarizes the methodology for analyzing building codes and isolating generic building characteristics. These characteristics can be used by building code experts to markup code documents and subsequently by building code users to extract code provisions that apply to their projects. Although this methodology has been developed for the National Building Code of Canada, it can be applied to any model code and implemented on most computer platforms using off-the-shelf software. The paper outlines the scope of the research, the historical development, the problems encountered, and paradigms for markup and extraction of code provisions.
keywords	Building Codes, Architecture, Engineering, Classification, Indexing
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	86dc
authors	Aouad, G., and Price, A.D.F.
year	1993
title	An integrated system to aid the planning of concrete structures: introducing the system
source	The Int. Journal of Construction IT1(2), pp.1-14
summary	This paper reports on the development at Loughborough University of a CAD-based integrated model to aid the planning of in-situ concrete structures. The system development started after a review of the planning models currently available and after a detailed questionnaire survey undertaken amongst the top UK and US contractors on the current status of planning techniques and information technology. The main aim of this system is to automate the planning process of in-situ concrete structures using data generated by CAD systems. So far, the integration of a CAD system (AutoCAD 10) and a computerized scheduling system (Artemis 2000) has been achieved on a typical IBM-PC. This enables the generation of network plans using AutoCAD which are then automatically transferred to the Artemis system for time and cost analyses.Traditionally, construction planners are faced with many conventional drawings and documents which are used to re-extract information relevant to their planning processes. Such an approach can be very inefficient as it involves data double-handling and is often error prone. In addition, current computerized construction planning applications are little more than the automation of manual formulations of plans. For example, data are fed into the planning system and computations are performed using either CPM (Critical Path Method) or PERT (Programme Evaluation and Review Technique). However, data relating to the planning process such as activity lists, resources requirements and durations are not automatically generated within the system. It would thus seem logical to devise a CAD-based integrated planning model which accepts data in its electronic format and involves some integration of the traditional planning approach. This paper introduces the proposed CAD-based integrated planning model and describes its different components. In addition, it discusses the system functional specifications and summarizes the main benefits and limitations of such a model.
series	journal paper
last changed	2003/05/15 21:45

_id	2ff9
id	2ff9
authors	Ataman, Osman
year	1993
title	Knowledge-based Stair Design
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 163-171
doi	https://doi.org/10.52842/conf.acadia.1993.163
summary	The application of computer--based technique to support architectural design has often concentrated on matters of representation. Typically, this means computer-aided drafting, and less frequently, computer-aided modeling and visualization. The promise of new computer-based tools to support the process of design has thus far failed to produce any significant tool that has had a widespread impact on the architectural profession. Most developments remain in university based research labs where they are used as teaching instruments in CAD courses or less often in design studios. While there are many reasons for this lack of dissemination, including a reluctance on the part of the architectural profession itself, the primary obstacles deal with difficulties in explicating design knowledge, representing this knowledge in a manner that can be used for design, and providing an intuitive and effective user interface, allowing the designer to easily use the tool for its intended purpose. This study describes a system that has been developed to address a number of these issues. Based on research findings from the field of Artificial Intelligence which expounds on the need for multiple techniques to represent any complex area of knowledge, we have selected a particular approach that focuses on multiple techniques for design representation. We review this approach in depth by considering its many facets necessary when implementing a knowledge-based system. We then partially test the viability of this approach through a small case study, implementing a knowledge-based system for designing stairs. While this effort only deals with a small part of the total design process, it does explore a number of significant issues facing the development of computer-based design assistants, and suggests several techniques for addressing these concerns.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	aa7f
authors	Bollinger, Elizabeth and Hill, Pamela
year	1993
title	Virtual Reality: Technology of the Future or Playground of the Cyberpunk?
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 121-129
doi	https://doi.org/10.52842/conf.acadia.1993.121
summary	Jaron Lanier is a major spokesperson of our society's hottest new technology: VR or virtual reality. He expressed his faith in the VR movement in this quote which appears in The User's Guide to the New Edge published by Mondo 2000. In its most technical sense, VR has attracted the attention of politicians in Washington who wonder if yet another technology developed in the United States will find its application across the globe in Asia. In its most human element, an entire "cyberpunk movement" has appealed to young minds everywhere as a seemingly safe form of hallucination. As architecture students, educators, and practitioners around the world are becoming attracted to the possibilities of VR technology as an extension of 3D modeling, visualization, and animation, it is appropriate to consider an overview of virtual reality. In virtual reality a user encounters a computersimulated environment through the use of a physical interface. The user can interact with the environment to the point of becoming a part of the experience, and the experience becomes reality. Natural and instinctive body movements are translated by the interface into computer commands. The quest for perfection in this human-computer relationship seems to be the essence of virtual reality technology. To begin to capture the essence of virtual reality without first-hand experience, it is helpful to understand two important terms: presence and immersion. The sense of presence can be defined as the degree to which the user feels a part of the actual environment. The more reality the experience provides, the more presence it has. Immersion can be defined as the degree of other simulation a virtual reality interface provides for the viewer. A highly immersive system might provide more than just visual stimuli; for example, it may additionally provide simulated sound and motion, and simultaneously prevent distractions from being present.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	6737
authors	Casaus, A., Fargas, J. and Papuzian, P.
year	1993
title	Hybrid Design Environments - A Research Program on Creative Collaboration and Communication
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.a8h
summary	This paper gives an overview of a research program initiated in the Architectural Design Department of the Escola Tècnica Superior d'Arquitectura de Barcelona on issues of communication and collaboration in computer aided design. The work is centered around emerging design situations which can be attributed directly to the incorporation of new technologies in education and practice. One of these is the "design triangle" composed of a traditional designer, a CAD workstation and a computer literate collaborator acting as the design medium. Another is the "virtual workshop" consisting of design collaboration involving large-scale distributed communications networks. The research program stresses three common characteristics of these situations which it aims to study in parallel in the setting of an design workshop. The first of these is the characteristic of distance, both physical and conceptual, which separates, on the one hand, the traditional designer from the CAD document and, on the other, the participants of a distributed workshop from each other and each others' thinking. The second, is the typically hybrid nature of such situations where computer technology interacts with more traditional techniques and alternative media are combined both at the level of production and in channels and modes of communication. And finally, the third and most significant for the methodology of the research program, is the fact that both the design triangle and the virtual workshop make explicit aspects of design activity, interaction and intentions which remain hidden or are only implicit in traditional designing.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	7fe0
authors	Castleman, Kenneth R.
year	1993
title	Digital image processing
source	California Institute of Technologie
summary	Digital image processing has experienced explosive growth over the past two decades. Public awareness has increased by way of video games, digital video special effects used in the entertainement industry, as well as articles in the mainstream press. However, the most significant impact of digital image processing in the 90s will be in the area of applications of real world problems. To help readers keep pace, author Kenneth R. Castleman concentrates on those techniques that have proven most useful in practice. Part I presents several important concepts that can be developed without detailed mathematical analysis for a basic understanding. Part II addresses techniques that rely more on mathematics and eaborates analytically on certain concepts introduced in Part I. Part III covers specific application aread that are particularly in industry, science, and medicine. Contents: Preface; Images and Digital Processing; Digitizing Images; Digital Image Display; Image Processing Software; The Gray Level Histogram; Point Operations; Algebraic Operations; Geometric Operations; Filter Design; Wavelet Transformations; Image Restorations; Image Compression; Three Dimensional Image Processing; Appendices; Index.
series	other
last changed	2003/04/23 15:14

_id	08fc
authors	Darken, R.P. and Sibert, J.L.
year	1993
title	A toolset for navigation in virtual environments
source	Proceedings of the ACM User Interface Software and Technology, pp.157-165
summary	Maintaining knowledge of current position and orientation is frequently a problem for people in virtual environments. In this paper we present a toolset of techniques based on principles of navigation derived from real world analogs. We include a discussion of human and avian navigation behaviors and show how knowledge about them were used to design our tools. We also summarize an informal study we performed to determine how our tools influenced the subjects' navigation behavior. We conclude that principles extracted from real world navigation aids such as maps can be seen to apply in virtual environments.
series	other
last changed	2003/04/23 15:14

_id	ecaade2014_146
id	ecaade2014_146
authors	Davide Ventura and Matteo Baldassari
year	2014
title	Grow: Generative Responsive Object for Web-based design - Methodology for generative design and interactive prototyping
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 587-594
doi	https://doi.org/10.52842/conf.ecaade.2014.2.587
wos	WOS:000361385100061
summary	This paper is part of the research on Generative Design and is inspired by the ideas spread by the following paradigms: the Internet of Things (Auto-ID Center, 1999) and the Pervasive/Ubiquitous Computing (Weiser, 1993). Particularly, the research describes a number of case studies and, in detail, the experimental prototype of an interactive-design object: “Grow-1”. The general assumptions of the study are as follows: a) Developing the experimental prototype of a smart-design object (Figure 1) in terms of interaction with man, with regard to the specific conditions of the indoor environment as well as in relation to the internet/web platforms. b) Setting up a project research based on the principles of Generative Design.c) Formulating and adopting a methodology where computational design techniques and interactive prototyping ones converge, in line with the principles spread by the new paradigms like the Internet of Things.
keywords	Responsive environments and smart spaces; ubiquitous pervasive computing; internet of things; generative design; parametric modelling
series	eCAADe
email
last changed	2022/06/07 07:55

_id	eaea2005_000
id	eaea2005_000
authors	Dechène, Sigrun und Manfred Walz (Eds.)
year	2006
title	Motion, E-Motion and Urban Space
source	Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4, 260 p.
summary	Simulating the development and the image of architecture and urban design means to show how the environment of the future and the living conditions could develop. At the same time it is part of our task to explain our work to local people and to the public and to passion skills in methods, instruments and knowledge in planning to the next generation of architects, planners and last but not least to discuss and to renew them once more for ourselves. Our aim was also to reflect what we have done since starting the look through the key-hole of endoscopy. Meanwhile this look has been completed since the beginnings in 1993 much more by computer and monitor. It is not the question to take the endoscope or the computer as a methodical and instrumental approach. Nowadays we normally decide to take the endoscope and the computer. In preparing the conference and the workshop we thought that this should now also be the moment not only to inform each other and the participants on methods, tools and best practices in simulating and designing the environment but also to focus on the social and human consequences of perception, movement and use the present urban spaces and the urban space in future. So we proposed the theme “MOTION, E-MOTION and URBAN SPACE” and we invited a scientific expert in experimental psychology to give us some serious reflections and one or another hint on our research themes and methods. The contributions and discussions in the conference showed that the proposal has not only been accepted but has also been completed and enriched especially concerning the theme urban space, it’s processes of usage and it‘s atmosphere. Also in the themes of endoscopy and the research on modelling urban spaces and architecture, meanwhile nearly “traditional” ones, remarkable results were presented and discussed. A very important point of contributions and the following discussions was how to present our subjects to the interested public and to improve our own internal exchange. An object could be to enforce the research tasks in researching together even more.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	8326
authors	Diessenbacher, Claus and Rank, Ernst
year	1993
title	Teaching Design with CAD?
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.i1h
summary	Abstract as well as functionally dependant design exercises are essential components of an architectural education at nearly every university. Their goal is to provide architect students with a feeling for proportions, colours, materials etc., and to teach and train them in threedimensional thinking. Pictures and concepts, developed by the designer are materialized by various technologies such as with pencil and paper in the traditional two-dimensional techniques or with clay, wood, paper etc. in three-dimensional modeling. Now the computer and the CAD-system join the palette of the designers available resources in presentation as both a two-dimensional and a three-dimensional medium. Although CAD is often considered and taught to be only a better drafting tool, the educational goal of our group at the University of Dortmund is to employ CAD as a design support medium. The prerequisites for work with the computer and the CAD system are provided in a compulsory two semester undergraduate subject. Basic programming, work with spreadsheets etc. are some exemplary themes provided in the form of lectures and practical exercises. A main emphasis of this instruction is the mastery of three-dimensional working technology with a comprehensive CAD-System. In cooperation of our computer science group and architecture chairs, seminars involving the use of CAD as a three-dimensional design tool, are offered as graduate courses. The seminars consist of loops of modeling and evaluating objects in a three-dimensional space. With this, the most possible realistic studies in colour, light and proportion take place exclusively on the computer.
series	eCAADe
last changed	2022/06/07 07:50

_id	2a5e
authors	Does, J. van der and Giró, H.
year	1997
title	Design communication and image processing
source	Architectural and Urban Simulation Techniques in Research and Education [Proceedings of the 3rd European Architectural Endoscopy Association Conference / ISBN 90-407-1669-2]
summary	In the proceedings of the first EAEA conference, 1993, I mentioned our first study focused on refining endoscopic video images of a detailed architectural model and drawings. The study was based on work with 900 subjects, of which 200 were professional architects. It has led to a number of technical improvements. In the second study we compared computer-aided design techniques with two techniques from the first study, endoscopic video recordings and coloured and black and white elevations and perspective drawings. Four different groups of 50 subjects took part in this research. We found that computer images are invariably judged to be of moderate value, while drawings yielded consistently high scores. Endoscopic video recordings of the scale model received high scores as far as emotional response is concerned, and moderate scores when the participants were questioned on the actual content of the recordings.
keywords	Architectural Endoscopy, Endoscopy, Simulation, Visualisation, Visualization, Real Environments
series	EAEA
email
more	http://www.bk.tudelft.nl/media/eaea/eaea97.html
last changed	2005/09/09 10:43

_id	084b
authors	Ellis, S.
year	1993
title	Pictorial Communication in Virtual and Real Environments
source	Washington, DC: Taylor and Francis
summary	Includes contributions from thirty nine internationally renowned authors addressing the perceptual, physiological, scientific and engineering issues that impact on successful pictorial communication. The book's range is broad and diverse covering areas such as visual and spatial perception, telerobotics, manual and supervisory control, cartography, scientific visualisation and medical illustration 'The book is a grand collection of ideas,experimental findings and personal experiences of those who use computer graphic images to achieve communication ... it is a well-presented, interesting and wide-ranging collection of writings.' - Cartographic Journal 'I can do no more than heartily recommend this book to anyone with even a marginal interest in design and the use of displays.
series	other
last changed	2003/04/23 15:14

For more results click below: