CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 254

_id ecaade2022_368
id ecaade2022_368
authors Das, Avishek, Brunsgaard, Camilla and Madsen, Claus Brondgaard
year 2022
title Understanding the AR-VR Based Architectural Design Workflow among Selected Danish Architecture Practices
source Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 381–388
doi https://doi.org/10.52842/conf.ecaade.2022.1.381
summary Virtual reality (VR) and augmented reality (AR) have been proposed to be additional architectural design mediums for at least 25 years (Dagit, 1993). Despite rapid technical and technological development, it has not been adopted into architectural design practices as compared to academia and research. Surveys from the American Institute of Architects (AIA) and Royal Institutes of British Architects (RIBA) demonstrate the state of architectural practices; 72% of architects and 65% of architects respectively are not using any kind of virtual, augmented, or mixed reality in their practices(RIBA and Microsoft, 2018; Hampson, 2020). In this paper, the authors investigate the state of practices, issues, challenges, and opportunities of the utilization of virtual, augmented, and mixed realities in six architectural practices in the Danish context. Three of the practices are large architectural practices, one medium-sized practice specializing in institutional, healthcare and cultural architecture, and one firm designing private family houses, kindergartens, daycares and places for people with disability and, one experimental design studio. All these practices have used VR/AR in their projects to various degrees. In recent years Danish architectural practices have been involved in various VR/AR-based exhibitions, demonstrations, and tool developments to promote the usage of the same in design practice. Through a set of qualitative interviews with personnel from key architectural practices, the authors would like to demonstrate the present state of practices. The investigation explores the usage of VR and AR in Danish architecture practices by identifying challenges and opportunities regarding skill levels, architectural typology, use cases, toolchains, and workflow and shows similarities and differences between traditional and VR-based design processes. The main findings show how VR/AR-based visualization helps architects to perceive spatiality and also ushers creativity through immersion and overlays.
keywords Virtual Reality, Augmented Reality, Architectural Design Practice, Denmark
series eCAADe
email
last changed 2024/04/22 07:10

_id 20c1
authors Alavalkama, Ilkka
year 1993
title Technical Aspects of the Urban Simulator in Tampere University of Technology
source Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 35-46
summary The colour video recording Urban Simulator in TUT was built very early compared with the development of video systems. A contract for planning the simulator electronics, mechanics and camera systems was made in january 1978 with two TUT students: Jani Granholm (computer science and engineering) and Ilkka Alavalkama (machine design and automation). Ease of control and maintenance were asked by side of ”human movement inside coloured small-scale architectural models”. From the beginning, all components of the system were carefully tested and chosen from various alternatives. Financial resources were quite limited, which lead to a long building process and to self-planned and produced mechanical and electronical elements. Some optical systems were constructed by using elements from various manufacturers.

keywords Architectural Endoscopy
series EAEA
more http://info.tuwien.ac.at/eaea/
last changed 2005/09/09 10:43

_id a927
authors Amirante, Isabella and Bosco, Antonio
year 1995
title Hypertext Between Research and Teaching: An Experience in a Didactic Building Technology Laboratory
source Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 3-12
doi https://doi.org/10.52842/conf.ecaade.1995.003
summary IPER (hypertext for the knowledge of building patrimony) is the result of a research developed with C.N.R. (National Research Institute). The aim of IPER is to provide the knowledge, the description and the management of one or more historical buildings for public or private institutions. IPER allowed us to improve our methodology of building analysis, covering various disciplinary fields, in two different systems. (1.) the first one, synthetic and suitable for a group of historical buildings, (2.) the second one, complex and particularly made for monumental buildings. // This experience is related to the new regulation of teaching architecture in Italy made in 1993. The main novelty is the introduction of the laboratories with the contemporary presence of two or three teachers of different disciplines, working together with the students on the same project with different approaches. This opportunity allowed us to introduce the "knowledge engineer" as a teacher in the laboratory of building technology. IPER is given to the students with the aim of experimenting and solving the theoretical and practical difficulties that students of different years may encounter in the knowledge and representation of buildings and in the organisation of all the data from the case study.
series eCAADe
more http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_1.htm
last changed 2022/06/07 07:54

_id 50ce
authors Baker, R.
year 1993
title Designing the Future: The Computer Transformation of Reality
source Thames and Hudson, Hong Kong
summary A coffee table book on computer applications? Well, yes, because it does deal largely with matters of graphic design in architecture, fashion and textiles, painting, and photography; but it also has items which might be of interest in its sections on digital publication, typography, and electronic communication in general. It also seeks to discuss the way in which these applications may force us to change the way we think. Robin Baker writes in an unfortunately stiff and abstract manner about the impact computer programmes have had on the world of art and design, but the graphic images and extended picture captions help to keep the reader awake - even though the main text sometimes disappears for two or three double page spreads on end. There are also smatterings of pretentious art-world-speak about 'solving certain spatial problems' (in the design of curtain fabrics or teapots) and the introduction (inevitable?) of new jargon: 'shape grammar'(a list of so-called shape 'rules'), 'repurposing' (putting somebody else's work to new use) and 'genetic algorithms' (sculptural designs based on re-processed organic shapes - most of which look like stomach tumours). In his favour, Baker very generously credits students and commercial designers who have produced the effects he describes and illustrates so well. For writers, he sketches in the possibilities of Hypertext and Hypermedia and points to the future of Hyper publishing which he (and Rupert Murdoch)believes will be with us before the end of the century. He seems to have a good oversight of what is possible and practicable - though one wonders how up-to-date the view is when his book may have begun its life anything up to three years ago. He usefully points out that much new technology exists in or drags along with it the forms of earlier periods - so that in an age of electronic communication we still have printed books as a dominant cultural form. Maybe this is as it should be - but Baker makes a persuasive case for the claim that All This is Going to Change.
series other
last changed 2003/04/23 15:14

_id ee23
authors Bille, Pia
year 1994
title A Study of Color
source The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 185-190
doi https://doi.org/10.52842/conf.ecaade.1994.185
summary Color courses are traditionally based on exercises carried out with either water color or colored paper. Use of the computer as a tool for teaching color theory and analyzing color in architecture was the topic of a course given at the School of Architecture and Planning at the State University of New York at Buffalo, USA where I was an exchange faculty in the academic year 1993/94. The course was structured into 3 topics: color theory, color perception and application of color.
series eCAADe
email
last changed 2022/06/07 07:52

_id aa7f
authors Bollinger, Elizabeth and Hill, Pamela
year 1993
title Virtual Reality: Technology of the Future or Playground of the Cyberpunk?
source Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 121-129
doi https://doi.org/10.52842/conf.acadia.1993.121
summary Jaron Lanier is a major spokesperson of our society's hottest new technology: VR or virtual reality. He expressed his faith in the VR movement in this quote which appears in The User's Guide to the New Edge published by Mondo 2000. In its most technical sense, VR has attracted the attention of politicians in Washington who wonder if yet another technology developed in the United States will find its application across the globe in Asia. In its most human element, an entire "cyberpunk movement" has appealed to young minds everywhere as a seemingly safe form of hallucination. As architecture students, educators, and practitioners around the world are becoming attracted to the possibilities of VR technology as an extension of 3D modeling, visualization, and animation, it is appropriate to consider an overview of virtual reality.

In virtual reality a user encounters a computersimulated environment through the use of a physical interface. The user can interact with the environment to the point of becoming a part of the experience, and the experience becomes reality. Natural and

instinctive body movements are translated by the interface into computer commands. The quest for perfection in this human-computer relationship seems to be the essence of virtual reality technology.

To begin to capture the essence of virtual reality without first-hand experience, it is helpful to understand two important terms: presence and immersion. The sense of presence can be defined as the degree to which the user feels a part of the actual environment. The more reality the experience provides, the more presence it has. Immersion can be defined as the degree of other simulation a virtual reality interface provides for the viewer. A highly immersive system might provide more than just visual stimuli; for example, it may additionally provide simulated sound and motion, and simultaneously prevent distractions from being present.

series ACADIA
email
last changed 2022/06/07 07:52

_id c372
authors Calvert, T., Bruderlin, A., Mah, S., Schiphorst, T. and Welman, C.
year 1993
title The Evolution of an Interface for Choreographers Evolving Design
source Proceedings of ACM INTERCHI'93 Conference on Human Factors in Computing Systems 1993 pp. 115-122
summary This paper describes the evolution of the interface to Life Forms, a compositional tool for the creation of dance choreography, and highlights some of the important lessons we have learned during a six year design and implementation period. The lessons learned can be grouped into two categories: 1) Process, and 2) Architecture of the Interface. Our goal in developing a tool for choreography has been to provide computer-based creative design support for the conception and development of dance. The evolution was driven by feedback from the choreographers and users who were members of the development team, combined with our knowledge of current thinking on design and composition. Although the interface evolved in a relatively unconstrained way, the resulting system has many of the features that theoretical discussion in human interface design has projected as necessary. The Life Forms interface has evolved incrementally with one major discontinuity where adoption of a new compositional primitive required a completely new version. The choreography and composition of a dance is a complex synthesis task which has much in common with design. Thus, the lessons learned here are applicable to the development of interfaces to such applications as computer aided design.
keywords Composition; Design; User Interface; Dance; Complexity; Choreography; Human Animation
series other
last changed 2002/07/07 16:01

_id a336
authors Calvo, Charles M.
year 1993
title SOME EPISTEMOLOGICAL CONCERNS REGARDING ARTIFICIAL INTELLIGENCE AND KNOWLEDGE-BASED APPROACHES TO ARCHITECTURAL DESIGN - A RENEWED AGENDA
source Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 155-162
doi https://doi.org/10.52842/conf.acadia.1993.155
summary It has been noted that designers - when confronted with computers - have, by and large, refused to accept the introduction of apparently new design methodologies, and it has been speculated that this is the result of a failure of those methodologies to address the cognitive processes which take place in the course of designing. This position is somewhat suspect in that such innovations as computer-aided drafting -which also fail to recognize these processes have been widely accepted. It is perhaps more likely that the lack of acceptance results from a perception on the part of designers that the new methodologies either do not reflect some or all of those concerns that designers consider fundamental to design, or that they actively interfere with the designer's ability to accomplish what he/she sees as the goals of design. Given that the application of artificial intelligence and related work to architecture is still in its infancy, all of this suggests the need for a reassessment of the role of computing in design in order to clarify and strengthen those roles deemed appropriate.

Two approaches to the integration of artificial intelligence and knowledge-based systems into architectural design practice are currently dominant. One attempts to create systems which can on their own produce designs, the other provides intelligent support for those doing design. It was, in part, the recognition of limitations in the ability of traditional CAD systems and building modelers to reflect what designers actually do that led to explorations into the idea of intelligent assistants. Development of such assistants was aided by research into the act and process of design through protocol and other studies. Although some work is currently being done in the development of artificial intelligence and knowledge based applications in architecture, and work continues to be done on the study of design methodologies, the bulk of available information in each of these areas remains in the realm of design disciplines related to but outside of architecture and do not reflect the explicit role of architectural design in the embodiment and expression of culture.

The relationship of intelligence to culture has resulted in some skepticism regarding the ultimate capacity of neural nets and symbolically programmed computers in general. Significant work has been done questioning the rational tradition in computer development for its failure to address phenomena which are not easily subject to scientific analysis. Further skepticism regarding the role of artificial intelligence and knowledge-based or expert systems in architectural design has been emerging recently. Such criticism tends to focus on two issues: the nature of drawing as an activity which involves both the generation and interpretation of graphic artifacts, and the nature of the human designer as an active agent in the design process.

series ACADIA
type normal paper
last changed 2022/06/07 07:54

_id 97e7
authors Carter, K.
year 1993
title Computer aided design: back to the drawing board
source Proc. of Creativity and Cognition, Loughborough, April
summary This paper argues that the role of Computer Aided Design (CAD) should be to enhance and extend paper-based working, rather than to replace it. Current CAD tools are little used in the early stages of designing. Paper is heavily used, with its physical properties supporting work practices that are not possible with CAD. This paper presents implications for the design of new computer-based tools drawn from observations of designers' work practices. A new system is described that integrates paper-based and computer-based working in the same physical space and supports the application of computation to images on paper.
series other
last changed 2003/04/23 15:50

_id caadria2007_659
id caadria2007_659
authors Chen, Zi-Ru
year 2007
title The Combination of Design Media and Design Creativity _ Conventional and Digital Media
source CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi https://doi.org/10.52842/conf.caadria.2007.x.w5x
summary Creativity is always interested in many fields, in particular, creativity and design creativity have many interpretations (Boden, 1991; Gero and Maher, 1992, 1993; Kim, 1990; Sternberg, 1988; Weisberg, 1986). In early conceptual design process, designers used large number of sketches and drawings (Purcell and Gero, 1998). The sketch can inspire the designer to increase the creativity of the designer’s creations(Schenk, 1991; Goldschmidt, 1994; Suwa and Tversky, 1997). The freehand sketches by conventional media have been believed to play important roles in processes of the creative design thinking(Goldschmidt, 1991; Schon and Wiggins, 1992; Goel, 1995; Suwa et al., 2000; Verstijnen et al., 1998; Elsas van and Vergeest, 1998). Recently, there are many researches on inspiration of the design creativity by digital media(Liu, 2001; Sasada, 1999). The digital media have been used to apply the creative activities and that caused the occurrenssce of unexpected discovery in early design processes(Gero and Maher, 1993; Mitchell, 1993; Schmitt, 1994; Gero, 1996, 2000; Coyne and Subrahmanian, 1993; Boden, 1998; Huang, 2001; Chen, 2001; Manolya et al. 1998; Verstijinen et al., 1998; Lynn, 2001). In addition, there are many applications by combination of conventional and digital media in the sketches conceptual process. However, previous works only discussed that the individual media were related to the design creativity. The cognitive research about the application of conceptual sketches design by integrating both conventional and digital media simultaneously is absent.
series CAADRIA
email
last changed 2022/06/07 07:50

_id 0b24
authors Chilton, J.C., Wester, T. and Yu, J.
year 1993
title Exploring Structural Morphology Using CAD
source [eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi https://doi.org/10.52842/conf.ecaade.1993.x.d1k
summary Often in the design process the student's imagination is restricted by their inability to visualise, model or accurately sketch ideas for innovative structural systems. By using CAD as a design tool it is possible to explore the morphology of complex structures and to be able to produce perspective drawings of them with relative ease. Within AutoCAD there is a small library of standard three-dimensional objects and surfaces that can be called upon to generate more complex forms. However, to further facilitate the architectural design process, an extended library of innovative structural forms would allow the professional designer, or student, greater design freedom and any increase in the palette of structural forms available should stimulate creativity. As practical examples, the paper describes how students have been encouraged to experiment with the use of structures which can only be physically modelled with difficulty and which are also difficult to represent on the two- dimensional surface of the drawing board unless the geometry has previously been determined by the methods described. These are (i) Reciprocal Frame three-dimensional beam grillage structures and (ii) plate domes created from lattice structures by point-to- plane duality. The problem, of representation of these structures has been overcome, in the first case, by generating AutoLISP procedures to draw the complex three-dimensional geometrical form automatically in AutoCAD and, in the second case, by the development of the computer program CADual.

series eCAADe
email
last changed 2022/06/07 07:50

_id af70
authors Coates, Paul and Yakeley, Megan
year 1993
title Function Follows Form: A Description of the Work and Educational Objectives of the MSc in Computing & Design at the University of East London School of Architecture
source [eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi https://doi.org/10.52842/conf.ecaade.1993.x.o2g
summary This paper demonstrates the approach to Architectural education that has been developed over the last 3 years on the MSc Computing & Design course at the University of East London. Although the course deals exclusively in computer based topics, the main concern is primarily with developing a design methodology and a way of teaching design method, more particularly an algorithmic description of form. Rule based design, emergent form and bottom up approaches to design have become fashionable to the point of ubiquity in the last 5 years, but we like to think that only at UEL have these concerns been linked to a consistent view of design.
series eCAADe
email
last changed 2022/06/07 07:50

_id e92c
authors Dave, Bharat
year 1993
title A Computer-Assisted Diagramming System
source Swiss Federal Institute of Technology, ETH Zurich
summary This research investigates characteristics and generation of graphic diagrams used in support of analysis, presentation and synthesis of information in various domains. The research is aimed at the development of a software system which can be used to specify, generate and manipulate diagrams similar to the way they are represented and operated upon in traditional media.Diagrams are graphic representations of symbolic propositions that allow tentative reasoning and inferencing, and enable a person to focus on selected aspects of a situation that are deemed of interest. The economy and directness of expression found in diagrams seem to be the prime reasons why they are so ubiquitous in many domains. Despite these advantages, studies into supporting diagrammatic representations using computers are rather sparse. This research is an attempt at developing a comprehensive framework of thought in this direction.In the context of design disciplines like architecture, this research forms a part of the continuum of studies in computer aided design techniques and tools. While a large number of tools and techniques in CAD have emerged so far, usage of such tools, due to their underlying representations, expects and demands commitment of too many details too early in the design process. This research is aimed at characterizing and developing a computer based diagramming system to support tentative reasoning using diagrams, and thus hopes to extend the scope of CAD environments in design. The thesis first articulates motivations for this topic in detail. Next, a discussion on the role played by diagrams as conceptual tools in various domains is presented. It is followed by a detailed look at characteristics and components of diagrams viewed as a graphic communication system. Next, a comprehensive set of requirements for an ideal software environment for diagramming tasks is developed. A prototype system called CDT was implemented and is used to demonstrate ideas developed in this research. The study concludes with some observations on contributions of this research effort and possible future extensions.
series thesis:PhD
email
last changed 2003/05/10 05:43

_id eaea2005_000
id eaea2005_000
authors Dechène, Sigrun und Manfred Walz (Eds.)
year 2006
title Motion, E-Motion and Urban Space
source Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4, 260 p.
summary Simulating the development and the image of architecture and urban design means to show how the environment of the future and the living conditions could develop. At the same time it is part of our task to explain our work to local people and to the public and to passion skills in methods, instruments and knowledge in planning to the next generation of architects, planners and last but not least to discuss and to renew them once more for ourselves. Our aim was also to reflect what we have done since starting the look through the key-hole of endoscopy. Meanwhile this look has been completed since the beginnings in 1993 much more by computer and monitor. It is not the question to take the endoscope or the computer as a methodical and instrumental approach. Nowadays we normally decide to take the endoscope and the computer. In preparing the conference and the workshop we thought that this should now also be the moment not only to inform each other and the participants on methods, tools and best practices in simulating and designing the environment but also to focus on the social and human consequences of perception, movement and use the present urban spaces and the urban space in future. So we proposed the theme “MOTION, E-MOTION and URBAN SPACE” and we invited a scientific expert in experimental psychology to give us some serious reflections and one or another hint on our research themes and methods. The contributions and discussions in the conference showed that the proposal has not only been accepted but has also been completed and enriched especially concerning the theme urban space, it’s processes of usage and it‘s atmosphere. Also in the themes of endoscopy and the research on modelling urban spaces and architecture, meanwhile nearly “traditional” ones, remarkable results were presented and discussed. A very important point of contributions and the following discussions was how to present our subjects to the interested public and to improve our own internal exchange. An object could be to enforce the research tasks in researching together even more.
series EAEA
email
more http://info.tuwien.ac.at/eaea
last changed 2008/04/29 20:46

_id 8326
authors Diessenbacher, Claus and Rank, Ernst
year 1993
title Teaching Design with CAD?
source [eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi https://doi.org/10.52842/conf.ecaade.1993.x.i1h
summary Abstract as well as functionally dependant design exercises are essential components of an architectural education at nearly every university. Their goal is to provide architect students with a feeling for proportions, colours, materials etc., and to teach and train them in threedimensional thinking. Pictures and concepts, developed by the designer are materialized by various technologies such as with pencil and paper in the traditional two-dimensional techniques or with clay, wood, paper etc. in three-dimensional modeling. Now the computer and the CAD-system join the palette of the designers available resources in presentation as both a two-dimensional and a three-dimensional medium. Although CAD is often considered and taught to be only a better drafting tool, the educational goal of our group at the University of Dortmund is to employ CAD as a design support medium. The prerequisites for work with the computer and the CAD system are provided in a compulsory two semester undergraduate subject. Basic programming, work with spreadsheets etc. are some exemplary themes provided in the form of lectures and practical exercises. A main emphasis of this instruction is the mastery of three-dimensional working technology with a comprehensive CAD-System. In cooperation of our computer science group and architecture chairs, seminars involving the use of CAD as a three-dimensional design tool, are offered as graduate courses. The seminars consist of loops of modeling and evaluating objects in a three-dimensional space. With this, the most possible realistic studies in colour, light and proportion take place exclusively on the computer.
series eCAADe
last changed 2022/06/07 07:50

_id 25de
authors Ervamaa, Pekka
year 1993
title Integrated Visualization
source Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 157-160
summary The Video and Multimedia studio at VTT, Technical Research Centre of Finland, started with endoscopy photography of scale models. Video recordings has been made since 1985 and computer graphic since 1989. New visualization methods and techniques has been taken into use as a part of research projects, but mainly we have been working with clients commissions only. Theoretical background for the visualizations is strong. Research professor Hilkka Lehtonen has published several papers concerning the theory of visualization in urban planning. This studio is the only professional level video unit at Technical Research Centre, which is a large polytechnic research unit. We produce video tapes for many other research units. All kind of integrated methods of visualization are useful in these video productions, too.
keywords Architectural Endoscopy
series EAEA
email
more http://info.tuwien.ac.at/eaea/
last changed 2005/09/09 10:43

_id a293
authors Fargas, Josep
year 1993
title Design Mediums and Other Phenomena of First Generation CAD Practice
source Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 99-105
doi https://doi.org/10.52842/conf.acadia.1993.099
summary In the majority of architecture firms which use CAD tools, computer technology has been retrofitted to an existing traditional practice, with mixed results. I will addresses some of the more interesting phenomena which occur in first generation CAD practices of this type, taking as a case study one well- established firm in Barcelona which, after more than thirty years of a successful practice, has adopted computer technology to such an extent that it is now very difficult to find even an ink pen in their offices.

Less than three years after the introduction of its first computer workstation, the Barcelona office is fully computerized, from carrying out even basic design directly with computer technology, to developing inhouse software and maintaining an internet node via modem. This rapid adoption of the technology, although a relatively smooth one, was not free from strange side-effects. Because of the continuing involvement of a large part of the existing staff, the transition to computer aided design required the appearance of hybrid methodologies which are neither the traditional ones, nor what one might expect to find in the newly established CAD practice.

series ACADIA
email
last changed 2022/06/07 07:55

_id a9bb
authors Flemming, Ulrich and Van Wyk, Skip (Eds.)
year 1993
title CAAD Futures ‘93 [Conference Proceedings]
source Fifth International Conference on Computer-Aided Architectural Design 1993/ ISBN 0-444-89922-7 / (Pittsbrugh / USA), 1993, 565 p.
summary The mission of the CAAD Futures series of conferences is to provide a forum for the presentation and discussion of innovative research and development in the area of computer- aided architectural design. CAAD Futures '93, sponsored by Carnegie Mellon University and its Department of Architecture, is the fifth conference in the series. In these proceedings, the papers accepted for presentation have been grouped into sections addressing similar topics or themes. The sections are presented in an order that proceeds roughly from the more specific, focused topics to the more general ones, ending with a group of papers illustrating emergent trends in practice, including urban planning and design.
series CAAD Futures
email
last changed 2003/02/26 17:24

_id 4203
authors Fraser, Michael
year 1993
title Boundary Representation in Practice
source Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 173-185
doi https://doi.org/10.52842/conf.acadia.1993.173
summary There is an essential contradiction between the making of buildings or built environments in a threedimensional modeler and the graphic control of this process. Three-dimensional modeling is a constructive activity, in which solids are assembled as they would be in an actual structure; it benefits the designer. Presentation and documentation, on the other hand, are prescriptive activities that direct some of the construction and all the visualization and criticism of the proposal; they benefit the user and builder.

A building while being designed can be visualized and criticized from its solid model, and the model can take a variety of forms depending on its part): computer-based, drawn in orthographic or perspective projection, constructed of cardboard or wood, or described narratively by means of text, programmatic data, performance model or animation. However, practicing architecture is the process of recording and communicating the decision making process and the contractual obligations that result. In actual practice, in contrast to the designer directed ideal, more participants are brought in sooner at the beginning of a project and with more publicity, which in turn means keeping more, not fewer, records. As the profession evolves, records of the string of design decisions will become more automated, more carefully structured and more retrievable. More buildings will be "tracked" and exposed to review in this way because public environmental sensitivity will improve. The communication between a single designer and his own thoughts will become less and less important.

series ACADIA
last changed 2022/06/07 07:50

_id ddss9207
id ddss9207
authors Gauchel, J., Hovestadt, L., van Wyk, S. and Bhat, R.R.
year 1993
title Modular building models
source Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary The development and implementation of a modular building model appropriate for computer aided design is described. The limitations of a unified building model with regard to concurrence and complexity in design is discussed. Current research suggests that to model real-world complexity, one must trade centralized control for autonomy. In this paper we develop a modular approach to building modelling that is based on object-oriented autonomy and makes it possible to define these models in a distributed concurrent manner. Such a modular and autonomous implementation brings inherent uncertainty and conflict which cannot be determined a priori.
series DDSS
last changed 2003/08/07 16:36

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 12HOMELOGIN (you are user _anon_728267 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002