Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 255

Reformat results as: short short into frame detailed detailed into frame

_id	c207
authors	Branzell, Arne
year	1993
title	The Studio CTH-A and the Searching Picture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 129-140
summary	What happens during an architect’s search for the best solution? How does he (or she) begin, which tools are chosen, what happens when he comes to a standstill? The activities – sketching, discussions with other people, making models, taking walks to think, visits to the library, etc? What is an ordinary procedure and what is more specific? Do the tools have an impact on the final solution chosen? What happens during periods of no activity? Are they important? In which fields of activities are signs of the searching process to be found? In other words — what is the process of creative thinking for architects? Mikael Hedin and myself at Design Methods, Chalmers University of Technology, have started research into architects’ problem-solving. We have finished a pilot study on a very experienced architect working traditionally, without Cad (”The Bo Cederlöf Case”). We have started preliminary discussions with our second ”Case”, an architect in another situation, who has been working for many years with Cad equipment (Gert Wingårdh). For our next case, we will study a third situation – two or more architects who share the responsibility for the solution and where the searching is a consequence of a dialogue between equal partners. At present, we are preparing a report on theories in and methods for Searching and Creativity. I will give you some results of our work up till now, in the form of ten hypotheses on the searching process. Finally, I would like to present those fields of activity where we have so far found signs of searching. Our approach, in comparison with earlier investigations into searching (the most respected being Arnheim’s study on Picasso’s completion of the Guernica) is to collect and observe signs of searching during the process, not afterwards. We are, to use a metaphor, following in the footsteps of the hunter, recording the path he chooses, what marks he makes, what tools, implements and equipment he uses. For practising architects: a better understanding of what is going on and encouragement to try new ways of searching, for architectural students: better preparation and training for problem solving. It all began while we compared the different objects in our collection of sketches at the Chalmers STUDIO for Visualisation and Communication. (For some years, we have been gathering sketches by Alvar Aalto, Jorn Utzon, Ralph Erskine, Erik and Tore Ahlsén, Lewerenz, Nyrén, Lindroos, Wingårdh and others in a permanent exhibition). We observed similarities in these sketches which allowed us to frame ten hypotheses about the searching process.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	c4da
authors	Rüdiger, Bjarne
year	1993
title	The Masonry House as a Digital Model
doi	https://doi.org/10.52842/conf.ecaade.1993.x.a8k
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	"The Masonry House" is an experimental building designed in connection with the building exhibition "Byggeri for Milliarder" ("Building for Billions") in Copenhagen. The house is intended as a collection of examples and did only exist during the week the exhibition was. "The Masonry House" contains examples of both old technology and attempts to show entirely new constructions and new ways of using masonry. The house is constructed as a combination of prefabricated elements, wall ribs, decks and walls, and of parts built on location, cupolas, stairs, etc. The building process with element assembling and construction had to be done in six days and demanded a precise Organization and coordination with use from shift work. The very house had been in process for quite a long time, but in connection with the carrying out and preparation of information materials the Datacentre at the School of Architecture was involved in the project. After having produced a spatial model of the house completed, the wish for describing the construction process arose; to produce a "spatial time schedule" for the use of workmen and to describe the process in an animation film for the spectators at the exhibition.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	291d
id	291d
authors	Van Bakergem, Davis W. and Obata, Gen
year	1993
title	MAKING THE PROBLEM VISIBLE: PROJECT SPECIFIC INFORMATION IN COLLABORATIVE DESIGN
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 471-480
summary	This paper describes our current work in the development of an interactive, collaborative design space. It attempts to anticipate a future in which complex design Problems are undertaken by an interdisciplinary, collaborative group of contributors working within an electronic, networked environment. These networked working groups are made possible by the expanded use of high-speed digital networks and are expected to continue to grow within the design profession Using the design of an academic building as a case study, several new tools and techniques were used to develop an information place superimposed over the three-dimensional digital model of the site and proposed building. These tools allow the user to create a collection of data including site documentation and analysis; propose interventions; and access the data through three-dimensional icons in the modeL Several new techniques related to collecting and accessing information within the collaborative space are discussed.
keywords	Collaboration, Hypermedia, Information Visualizer, Virtual Workspace, Image Collections
series	CAAD Futures
type	normal paper
last changed	2004/04/10 06:43

_id	88c5
authors	Caturano, U.
year	1993
title	A Proposal of Iconic Map on Computer Aided Architectural Design: 3DIMCAAD
doi	https://doi.org/10.52842/conf.ecaade.1993.x.g9p
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	During the development of my graduation thesis I had to propose a subdivision of informatics technologies for architectural design into several research fields, each of them characterized by specific aims. This kind of subdivision was originally configured as an orientation tool inside the wide CAAD discipline, and only in a second time it took the features of a complete organization layout in which it is understandable not only the position of each single discipline in comparison with the others but, above all, the connections and interactions between them. The model, obtained as the result of many handlings but undefined yet, has been named 3DIMCaad (3 Dimensional Iconic Map on Computer Aided Architectural Design) and, in according to an initial hypothesis it could be regarded as a map of the sectors pointed out by my proposal, in fact, it is a iconic model of the connections and differences between the informatic main topics that I analysed. Every main topic is represented by a spheric nucleus linked to the others by a connection line (the ''pipe''), the dimension of which, quite generous, makes the observer understand the numerous interactions and exchange presents if two main topics are linked.
series	eCAADe
last changed	2022/06/07 07:50

_id	a927
authors	Amirante, Isabella and Bosco, Antonio
year	1995
title	Hypertext Between Research and Teaching: An Experience in a Didactic Building Technology Laboratory
doi	https://doi.org/10.52842/conf.ecaade.1995.003
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 3-12
summary	IPER (hypertext for the knowledge of building patrimony) is the result of a research developed with C.N.R. (National Research Institute). The aim of IPER is to provide the knowledge, the description and the management of one or more historical buildings for public or private institutions. IPER allowed us to improve our methodology of building analysis, covering various disciplinary fields, in two different systems. (1.) the first one, synthetic and suitable for a group of historical buildings, (2.) the second one, complex and particularly made for monumental buildings. // This experience is related to the new regulation of teaching architecture in Italy made in 1993. The main novelty is the introduction of the laboratories with the contemporary presence of two or three teachers of different disciplines, working together with the students on the same project with different approaches. This opportunity allowed us to introduce the "knowledge engineer" as a teacher in the laboratory of building technology. IPER is given to the students with the aim of experimenting and solving the theoretical and practical difficulties that students of different years may encounter in the knowledge and representation of buildings and in the organisation of all the data from the case study.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_1.htm
last changed	2022/06/07 07:54

_id	97e7
authors	Carter, K.
year	1993
title	Computer aided design: back to the drawing board
source	Proc. of Creativity and Cognition, Loughborough, April
summary	This paper argues that the role of Computer Aided Design (CAD) should be to enhance and extend paper-based working, rather than to replace it. Current CAD tools are little used in the early stages of designing. Paper is heavily used, with its physical properties supporting work practices that are not possible with CAD. This paper presents implications for the design of new computer-based tools drawn from observations of designers' work practices. A new system is described that integrates paper-based and computer-based working in the same physical space and supports the application of computation to images on paper.
series	other
last changed	2003/04/23 15:50

_id	25de
authors	Ervamaa, Pekka
year	1993
title	Integrated Visualization
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 157-160
summary	The Video and Multimedia studio at VTT, Technical Research Centre of Finland, started with endoscopy photography of scale models. Video recordings has been made since 1985 and computer graphic since 1989. New visualization methods and techniques has been taken into use as a part of research projects, but mainly we have been working with clients commissions only. Theoretical background for the visualizations is strong. Research professor Hilkka Lehtonen has published several papers concerning the theory of visualization in urban planning. This studio is the only professional level video unit at Technical Research Centre, which is a large polytechnic research unit. We produce video tapes for many other research units. All kind of integrated methods of visualization are useful in these video productions, too.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	675c
authors	Koutamanis, A., Bridges, A.H. and Van Loon, P.P.
year	1993
title	A New Framework for Teaching Computer-Aided Design at the Faculty of Architecture, Delft University of Technology
doi	https://doi.org/10.52842/conf.ecaade.1993.x.t4h
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	The paper describes the new organization of computer-aided design courses at the Faculty of Architecture, Delft University of Technology. The main characteristics of the new organization are emphasis on both technical skills and methodical knowledge, and a wide spectrum of subjects and applications distributed in the thematic structure of the first and second years. As a representative of the new courses the paper outlines Schematic Design, the first computer course in the second year.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	69b3
authors	Markelin, Antero
year	1993
title	Efficiency of Model Endoscopic Simulation - An Experimental Research at the University of Stuttgart
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 31-34
summary	At the Institute of Urban Planning at the University of Stuttgart early experiments were made with the help of endoscopes in the late 1970’s. The intention was to find new instruments to visualize urban design projects. The first experiment included the use of a 16 mm film of a 1:170 scale model of the market place at Karlsruhe, including design alternatives (with trees, without trees etc). The film was shown to the Karlsruhe authorities, who had to make the decision about the alternatives. It was said, that the film gave a great help for the decision-making and a design proposition had never before been presented in such understandable way. In 1975-77, with the support of the Deutsche Forschungsgemeinschaft (German Research Foundation) an investigation was carried out into existing endoscopic simulation facilities, such as those in Wageningen, Lund and Berkeley. The resulting publication was mainly concerned with technical installations and their applications. However a key question remained: ”Can reality be simulated with endoscopy?” In 1979-82, in order to answer that question, at the Institute was carried out the most extensive research of the time, into the validity of endoscopic simulation. Of special importance was the inclusion of social scientists and psychologists from the University of Heidelberg and Mannheim. A report was produced in 1983. The research was concerned with the theory of model simulation, its ways of use and its users, and then the establishment of requirements for effective model simulation. For the main research work with models or simulation films, psychological tests were developed which enabled a tested person to give accurate responses or evidence without getting involved in alien technical terminology. It was also thought that the use of semantic differentials would make the work imprecise or arbitrary.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	a4f8
authors	Monedero, Javier
year	1993
title	Renderings. Some Technical and Non Technical Questions Raised by the Use of Computers in the Visual Analysis of Architecture
doi	https://doi.org/10.52842/conf.ecaade.1993.x.a5t
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	It should be expected, in a Congress, that participants bring with them, not only ideas, but also results or, at least, stimulating images. In the Laboratory of Architectural Graphic Techniques at the ETS of Barcelona, we have spent some time generating images directly related with architecture, based on the work of both students and professors. These images have been produced with academic purposes, but also in relation with some works carried out with City Institutions interested in the study of the evaluation of environment visual impact and the role that computers may play in this area. In our previous Congress, in Barcelona, we showed some of these images, obtained by direct digital processing of bitmaps. In another Congress, later, we showed some other images, obtained by rendering, with simple local models (Phong models) and some tricks that helped to make them more realistic. Although I do agree with the old chinese saying that a good image is worth a thousand words, in this case, I have thought more convenient to present a paper that may be read quietly by those interested in these subjects, that might be useful just as it gathers references known by many but grouped in a particular order, and that pretends, respectfully, to criticize the actual situation. This can explain why we consider that the results we have obtained should be improved by new and better techniques and why we think that this dissatisfaction should be shared by others who do not seem to feel the same as we do. The aim of this contribution is, therefore, to reflect on the actual situation and the ways there seem to be open for us to follow.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	2006_252
id	2006_252
authors	Penttilä, Hannu
year	2006
title	Managing the Changes within the Architectural Practice - The Effects of Information and Communication Technology (ICT)
doi	https://doi.org/10.52842/conf.ecaade.2006.252
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 252-260
summary	The architectural working environment has changed during the last 30 years more than ever before. Most of the changes have been related with information and communication technologies (ICT). Architectural working methods and tools have changed profoundly, when CAD has replaced more traditional methods and tools. Communicative working environment and document management within design & construction has also been changed to digital, meaning email and project webs. Completing a traditional architectural profile of the 20th centrury, a drawer-designer, contemporary communicating and managing skills plus mastering ICT are needed today to operate modern architectural practise properly. The objective of this study is to create a change-oriented understanding of the contemporary architectural profession concentrating on architectural information management. The first phase, a literature study, will be followed by interviews and case-studies, to examine three hypothetically different periods of time: a) 1980-85 the era before CAD, the last days of hand-drawing, b) 1993-98 the era of digital drawing, the expansion of architectural CAD, c) 2000-05 the rise of integrated and pervasive web-supported digital design. The study will propose new aspects to be included in the modern architectural profile, namingly project coordination, collaborative team-work, design information integration and profound digital content management.
keywords	architectural profession; design practice; architectural ICT; change management
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ddss9210
id	ddss9210
authors	Poortman, E.R.
year	1993
title	Ratios for cost control
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The design of buildings takes place in phases representing a development from rough to precision planning. Estimates are made in order to test whether the result is still within the budget set by the client or developer. In this way, the decisions taken during the design phase can be quantified and expressed in monetary terms. To prevent blaming the wrong person when an overrun is discovered, the cost control process has to be improved. For that purpose, two new procedures have been developed: (i) a new translation activity; and (ii) ratios by which quantities can be characterized. 'Translation is the opposite of estimation. A monetary budget is converted -'translated' - into quantities, reflecting the desired quality of the building materials. The financial constraints of the client are thus converted into quantities - the building components used by the designers. Characteristic quantity figures play an important role in this activity. In working out an estimate, the form factor (i.e., the ratio between two characteristic values of a building component) has to be determined. The unit cost is then tested against that ratio. The introduction of the 'translation' activity and the use of characteristic quantity figures and form factors enhance existing estimation methods. By implementing these procedures, cost control becomes considerably more reliable.
series	DDSS
last changed	2003/08/07 16:36

_id	07df
authors	Smeltzer, Geert T A. and Dijkstra, Jan
year	1993
title	A Time Dimension for Computer-Aided Architectural Design Systems
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 391-403
summary	This paper presents the importance of a time dimension for CAAD systems and describes the idea and research intentions to implement this dimension as a new aspect of design information. A time dimension is proposed as a tool for the organization of design information and for the reproduction of design processes. The aim of the research is to propose a facility to record all design states generated during an architectural design process, in a temporally coordinated manner in one information system. Such an information system should make it possible to have the computer register and reproduce the design process in a procedural manner and compare different design states. This will lead to a better analysis and evaluation of design states and to a possible analysis and evaluation of design processes.
keywords	Computer-Aided Architectural Design, Time, Time Dimension, Temporal Aspects
series	CAAD Futures
last changed	1999/04/07 12:03

_id	0319
authors	Stenros, Helmer
year	1993
title	The History of the Laboratory for Visual Simulation and Research Work in Tampere
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 3-8
summary	Many things are born from lucky chances or as the sum of them. I see it that way when I consider those events and stages that have led to this meeting in Tampere. For myself, the study of the environmental simulator and the activities around it started in Copenhagen in 1977 in the meeting of the professors of architecture of the northern countries. I met Professor Acking from Lund University of Technology and he told me about his studies in perception and the black–and–white environmental simulator that they had built. When we started architectural education in Tampere in 1969, I had from the beginning looked for new ways to teach in order to renew the old, traditional ways of teaching architecture. After the meeting in Copenhagen, we decided to build our own environmental simulator in our faculty in Tampere.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	ddss9201
id	ddss9201
authors	Van Bakel, A.P.M.
year	1993
title	Personality assessment in regard to design strategies
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper discusses some preliminary results of several knowledge-acquisition and documentation-structuring techniques that were used to assess the working styles of architects. The focus of this assessment was on their strategic design behaviour. Hettema's Interactive Personality Model (Hettema 1979, 1989) was used to explain and interpret these results. The methods used to acquire the necessary data are protocol analysis, card sorting and interviews. The results suggest that at least three parameters can be used to explain and differentiate the strategic design behaviour of architects. These parameters are S (site-oriented), B (brief-oriented) and C (concept-oriented). A priority hierarchy of these parameters reveals six major distinguishable working styles. These results are captured in a new design model that can be used in data bank implementations.
series	DDSS
last changed	2003/08/07 16:36

_id	e80e
authors	Van der Does, Jan
year	1993
title	Visualising by Means of Endoscope, Computer and Hand-Drawn Techniques
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 167-180
summary	Traditionally, communication during the various stages of the building process takes place via drawings of floor plans, elevations, perspectives and scale models. Computerized drawing techniques have recently come into use. Ways of presenting designs have increasingly become of far-reaching importance in current architecture. Nowadays architectural firms employ specialists who are familiar with the latest developments in the field of presentation techniques, or they farm this highly significant part of their job out to gifted designers. Some of the new techniques being developed endeavor to provide a more realistic presentation of designs of housing estates. Apart from new drawing techniques, mention should also be made of the endoscope, an instrument which can simulate an eye-level tour around a scale model while recording it on videotape. Realistic representations differ quite a lot from the conventional architectural presentation techniques applied, which require a larger amount of imagination on the part of the onlookers. The afore mentioned architectural notation systems, on the one hand, can only be understood by experts, in spite of added explanatory signs and symbols. The often used models and artist’s impressions, on the other hand, frequently create a somewhat distorted view, due to lack of concern for spatial proportions. As a consequence, the design presented and the actual architectural realisation may turn out to differ widely. To bridge the widening gap between the experts and the users, clients and government officials, research concerning architectural representation is needed. In 1990 a Dutch scientific journal, issued by The Delft University, published an illustrated report of research findings under the title Overdracht en Simulatie (Information and Simulation). The article gives a description of a pilot study carried out by a research team (Van Der Does, Van Haaften, Kegel and Vrins) to assess and evaluate various presentation techniques used in architecture. This study was just a first step towards a more detailed follow-up study, to which I shall come back after having given a summarized view of the pilot study.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	ea5a
authors	Wojtowicz, J., Papazian, P., Fargas, J., Davidson, J.N. and Cheng, N.
year	1993
title	Asynchronous Architecture
doi	https://doi.org/10.52842/conf.acadia.1993.107
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 107-117
summary	Computer culture creates new demands on the process of making architecture. Both academia and practice are undergoing rapid changes due to the impact of information technology, and one of the most significant phenomena which has resulted from this transformation is collaborative design in a networked environment. Many researchers in the field have focused their efforts on minimizing or eliminating an apparent shortcoming of networked collaboration, namely the difficulty of immediate interaction between participants [Maher, Gero and Sand, 1993]. In an ongoing experiment in collaborative design we have taken a different approach. Instead of trying to work in a synchronous environment, we have taken the asynchronous nature of networked collaboration to be one of the important features of this ethereal medium, a feature whose consequences need to be explored.
series	ACADIA
email
last changed	2022/06/07 07:57

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ca14
authors	Gavin, Lesley
year	1993
title	Generative Modelling and Electronic Lego
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q8a
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	This paper shows work exemplifying the further extent of computer capabilities in the field of design. The work stems from a belief that for computers to be used effectively within the architectural profession their utility must stretch far beyond the process of description of geometric data, but be incorporated in the fundamental roots of design: that of conceptual design. Computers can be used to access the knowledge we have and then formulate this knowledge into a working language of design. Computers can be used to generate space and form in accordance with any relationship the designer may choose to set. This allows them to be used from the very conception of design. It is only by working from the very beginning, the very basis of the design of a building that we can fully develop the integration of computers in the construction industry. The work undertaken sets out primarily to explore one of the ways computers could be used in the field of architectural design. In recognition that an important byproduct of any design search is the enhanced understanding of the problem itself, the work was directed towards a particular project. This allowed each stage of thought to be to be considered as it arose and subsequently incorporated into the design model. The work does not attempt to automise the design process but simply tries to explore some of the opportunities offered by computers and see if they can be easily incorporated into the design process offering design solutions that may not otherwise have been considered. The exploration resulted in a simple design process model that incorporates the more accessible and useful aspects of computer technology.
keywords	Generative Modelling, Rule Based Form, Random Factors, Shape Grammars
series	eCAADe
email
last changed	2022/06/07 07:50

_id	c9de
authors	Harfmann, Anton C.
year	1993
title	Component-Based, Three-Dimensional "Working Drawings"
doi	https://doi.org/10.52842/conf.acadia.1993.141
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 141-151
summary	It is now possible to communicate technical information about a building utilizing accurate threedimensional computer modeling of component assemblies of an entire building for the production of an alternative set of "working drawings." Most assembly illustrations and final appearance can be presented as output from the computer model. The use of these three-dimensional images in the practice of architecture may improve communication between the members of the building design team and, therefore, may improve the overall design integration of the various systems in a building. Additionally, this type of component model construction for the production of technical drawings offers a unique bridge over the gap between the practice of architecture and the teaching of architecture. Rather than teaching students how to "do working drawings," something all practitioners wish the academic institutions did, students would develop the ability to design, integrate, and construct complex three-dimensional assemblies and present them in a variety of ways using the standard sections, layers, view, etc. inherent in any reasonable threedimensional computer based modeling system.
series	ACADIA
email
last changed	2022/06/07 07:49

For more results click below: