Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 255

Reformat results as: short short into frame detailed detailed into frame

_id	c207
authors	Branzell, Arne
year	1993
title	The Studio CTH-A and the Searching Picture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 129-140
summary	What happens during an architect’s search for the best solution? How does he (or she) begin, which tools are chosen, what happens when he comes to a standstill? The activities – sketching, discussions with other people, making models, taking walks to think, visits to the library, etc? What is an ordinary procedure and what is more specific? Do the tools have an impact on the final solution chosen? What happens during periods of no activity? Are they important? In which fields of activities are signs of the searching process to be found? In other words — what is the process of creative thinking for architects? Mikael Hedin and myself at Design Methods, Chalmers University of Technology, have started research into architects’ problem-solving. We have finished a pilot study on a very experienced architect working traditionally, without Cad (”The Bo Cederlöf Case”). We have started preliminary discussions with our second ”Case”, an architect in another situation, who has been working for many years with Cad equipment (Gert Wingårdh). For our next case, we will study a third situation – two or more architects who share the responsibility for the solution and where the searching is a consequence of a dialogue between equal partners. At present, we are preparing a report on theories in and methods for Searching and Creativity. I will give you some results of our work up till now, in the form of ten hypotheses on the searching process. Finally, I would like to present those fields of activity where we have so far found signs of searching. Our approach, in comparison with earlier investigations into searching (the most respected being Arnheim’s study on Picasso’s completion of the Guernica) is to collect and observe signs of searching during the process, not afterwards. We are, to use a metaphor, following in the footsteps of the hunter, recording the path he chooses, what marks he makes, what tools, implements and equipment he uses. For practising architects: a better understanding of what is going on and encouragement to try new ways of searching, for architectural students: better preparation and training for problem solving. It all began while we compared the different objects in our collection of sketches at the Chalmers STUDIO for Visualisation and Communication. (For some years, we have been gathering sketches by Alvar Aalto, Jorn Utzon, Ralph Erskine, Erik and Tore Ahlsén, Lewerenz, Nyrén, Lindroos, Wingårdh and others in a permanent exhibition). We observed similarities in these sketches which allowed us to frame ten hypotheses about the searching process.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	caadria2007_659
id	caadria2007_659
authors	Chen, Zi-Ru
year	2007
title	The Combination of Design Media and Design Creativity _ Conventional and Digital Media
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
doi	https://doi.org/10.52842/conf.caadria.2007.x.w5x
summary	Creativity is always interested in many fields, in particular, creativity and design creativity have many interpretations (Boden, 1991; Gero and Maher, 1992, 1993; Kim, 1990; Sternberg, 1988; Weisberg, 1986). In early conceptual design process, designers used large number of sketches and drawings (Purcell and Gero, 1998). The sketch can inspire the designer to increase the creativity of the designer’s creations(Schenk, 1991; Goldschmidt, 1994; Suwa and Tversky, 1997). The freehand sketches by conventional media have been believed to play important roles in processes of the creative design thinking(Goldschmidt, 1991; Schon and Wiggins, 1992; Goel, 1995; Suwa et al., 2000; Verstijnen et al., 1998; Elsas van and Vergeest, 1998). Recently, there are many researches on inspiration of the design creativity by digital media(Liu, 2001; Sasada, 1999). The digital media have been used to apply the creative activities and that caused the occurrenssce of unexpected discovery in early design processes(Gero and Maher, 1993; Mitchell, 1993; Schmitt, 1994; Gero, 1996, 2000; Coyne and Subrahmanian, 1993; Boden, 1998; Huang, 2001; Chen, 2001; Manolya et al. 1998; Verstijinen et al., 1998; Lynn, 2001). In addition, there are many applications by combination of conventional and digital media in the sketches conceptual process. However, previous works only discussed that the individual media were related to the design creativity. The cognitive research about the application of conceptual sketches design by integrating both conventional and digital media simultaneously is absent.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	0b24
authors	Chilton, J.C., Wester, T. and Yu, J.
year	1993
title	Exploring Structural Morphology Using CAD
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.d1k
summary	Often in the design process the student's imagination is restricted by their inability to visualise, model or accurately sketch ideas for innovative structural systems. By using CAD as a design tool it is possible to explore the morphology of complex structures and to be able to produce perspective drawings of them with relative ease. Within AutoCAD there is a small library of standard three-dimensional objects and surfaces that can be called upon to generate more complex forms. However, to further facilitate the architectural design process, an extended library of innovative structural forms would allow the professional designer, or student, greater design freedom and any increase in the palette of structural forms available should stimulate creativity. As practical examples, the paper describes how students have been encouraged to experiment with the use of structures which can only be physically modelled with difficulty and which are also difficult to represent on the two- dimensional surface of the drawing board unless the geometry has previously been determined by the methods described. These are (i) Reciprocal Frame three-dimensional beam grillage structures and (ii) plate domes created from lattice structures by point-to- plane duality. The problem, of representation of these structures has been overcome, in the first case, by generating AutoLISP procedures to draw the complex three-dimensional geometrical form automatically in AutoCAD and, in the second case, by the development of the computer program CADual.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2022_368
id	ecaade2022_368
authors	Das, Avishek, Brunsgaard, Camilla and Madsen, Claus Brondgaard
year	2022
title	Understanding the AR-VR Based Architectural Design Workflow among Selected Danish Architecture Practices
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 381–388
doi	https://doi.org/10.52842/conf.ecaade.2022.1.381
summary	Virtual reality (VR) and augmented reality (AR) have been proposed to be additional architectural design mediums for at least 25 years (Dagit, 1993). Despite rapid technical and technological development, it has not been adopted into architectural design practices as compared to academia and research. Surveys from the American Institute of Architects (AIA) and Royal Institutes of British Architects (RIBA) demonstrate the state of architectural practices; 72% of architects and 65% of architects respectively are not using any kind of virtual, augmented, or mixed reality in their practices(RIBA and Microsoft, 2018; Hampson, 2020). In this paper, the authors investigate the state of practices, issues, challenges, and opportunities of the utilization of virtual, augmented, and mixed realities in six architectural practices in the Danish context. Three of the practices are large architectural practices, one medium-sized practice specializing in institutional, healthcare and cultural architecture, and one firm designing private family houses, kindergartens, daycares and places for people with disability and, one experimental design studio. All these practices have used VR/AR in their projects to various degrees. In recent years Danish architectural practices have been involved in various VR/AR-based exhibitions, demonstrations, and tool developments to promote the usage of the same in design practice. Through a set of qualitative interviews with personnel from key architectural practices, the authors would like to demonstrate the present state of practices. The investigation explores the usage of VR and AR in Danish architecture practices by identifying challenges and opportunities regarding skill levels, architectural typology, use cases, toolchains, and workflow and shows similarities and differences between traditional and VR-based design processes. The main findings show how VR/AR-based visualization helps architects to perceive spatiality and also ushers creativity through immersion and overlays.
keywords	Virtual Reality, Augmented Reality, Architectural Design Practice, Denmark
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ee51
authors	Glanville, Ranulph
year	1993
title	Exploring and Illustrating
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.l5o
summary	CAD, in its usually available forms, is wonderful at illustrating proposed architectural objects. But, as I argued last year at the Barcelona meeting, it is not so good at helping us extend the richness and development of architectural ideas—at the "back of envelope" and other developmental Ievels—indeed, it is (for pragmatic reasons—and others) actually restrictive of change, what-if, suck-it-and-see, etc. I shall describe a work environment, which we have been developing since last year in Portsmouth, in which computing is used by students to assist the generation, testing and extension of ideas: in which exploring takes precedence over illustrating. The central notion of this environment involves the extension and manipulation, through co-operative sharing of a joint "resource base" of computer stored images (recognising origination rather than ownership), and (parts of) which may be copied and transformed by group members as they seek to develop, enrich and extend their ideas. Transformations may be intentional, but some occur through the limits of our computational medium such as compression losses, file formats, colour depth and resolution and are welcomed as a contribution made by the computing medium used. Images are located through a developing, shared filing system, picture search and history trace. The environment relies on a small suite of computers wile a powerful machine acting as a fileserver and undertaking central, computationally-intensive tasks. For this environment, we have chosen software carefully, and the choice will be described. We have also developed a small, but crucial program that traces developments in the shared resource base—in what is, in effect, our own, operational CyberSpace (as distinct from a Virtual Reality). Through these mechanisms, we believe we are able to evade the limitation set by Ross Ashby's "Law of Requisite Variety", thus expanding the creativity-base of participating designers (students). There are no "scientific results", but we believe the reasoning behind, and the activity and exploration of our environment is valuable in itself, and may be of interest to collegues.
series	eCAADe
last changed	2022/06/07 07:50

_id	c9cf
authors	Logan, B. and Smithers, T.
year	1993
title	Creativity and design as exploration
source	J.S. Gero and M. L. Maher (eds), Modelling Creativity and Knowledge-Based Creative Design, Lawrence Erlbaum Associates, pp. 139-175
summary	This paper considers the problem of creative design, and in particular the role of a priori knowledge or "prototypes" in the design process. A design problem is characterised as one in which both the objectives and the means available for achieving these objectives are (of necessity) initially only poorly defined. Some observations concerning the nature of design process based on this characterisation are presented, and a model of the design process as a knowledge-based exploration task described. The role of prototypes in organising this knowledge is examined, and the widely accepted view that prototypes can form the principle source of knowledge for creativity in design is challenged. In a final section we outline the structural principles of a representation scheme which aims to overcome of these difficulties and describe a design support system which uses this scheme to support the design process.
series	other
last changed	2003/04/23 15:14

_id	ecaade2014_153
id	ecaade2014_153
authors	David Morton
year	2014
title	Augmented Reality in architectural studio learning:How Augmented Reality can be used as an exploratory tool in the design learning journey
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 343-356
doi	https://doi.org/10.52842/conf.ecaade.2014.1.343
wos	WOS:000361384700034
summary	The boundaries of augmented reality in the academic field are now being explored at an ever increasing level. In this paper we present the initial findings of an educational project focusing on the use of augmented reality in the design process of an architectural student. The study seeks to evaluate the use of AR as a tool in the design stages, allowing effective exploration of spatial qualities of design projects undertaken in the studio. The learning process is guided by the exploration and detection of a design idea in both form and function, with the virtual environment providing a dynamic environment (Mantovani, 2001). This is further reflected in the constructivist theory where the learning processes use conceptual models, which are used to create incremental stages that become the platform to attain the next [Winn, 1993]. The additional benefit of augmented reality within the learning journey is the ability of the students to visually explore the architectural forms they are creating in greater depth.
keywords	Augmented reality; pedagogy; learning journey; exploration
series	eCAADe
email
last changed	2022/06/07 07:55

_id	412e
authors	Gross, M.D., Do, E. and McCall, R.J.
year	1997
title	Collaboration and Coordination in Architectural Design: approaches to computer mediated team work
source	TeamCAD 97, 17-23
summary	In 1993 and 1994, instructors and students of architecture at several universities around the world* collaborated briefly on two "virtual design studio" projects. Using off-the-shelf technology of the time-email, CU-See-Me internet video, international conference calls, and exchange of CAD drawings, images, and Quicktime animations-this ambitious project explored the possibility of bringing together diverse members of an international design team together to collaborate on a short term (two week) project. Central to the "Virtual Design Studio" was a 'digital pinup board', an area where participating designers could post and view drawings and textual comments; video links and email exchange provided the media for direct communication media about designs. A report on the project [21] makes clear that the process was not without technical difficulties: a significant amount of communication concerned scheduling and coordinating file formats; disappointingly little was devoted to discussions of design issues. Although it's clear that many of the minor technical problems that inevitably plague a forward-looking effort like the Virtual Design Studio will be solved in the near term, the project also reveals the need for research on software and design practices to make computer mediated design collaboration realize its attractive promise.
series	journal paper
email
last changed	2003/04/23 15:50

_id	2979
authors	Henry, D. and Furness, T.A.
year	1993
title	Spatial Perception in Virtual Environments: Evaluating an Architectural Application
source	IEEE Virtual Reality Annual International Symposium, 1993, Seattle
summary	Over the last several years, professionals from many different fields have come to the Human Interface Technology Laboratory (H.I.T.L) to discover and learn about virtual environments. In general, they are impressed by their experiences and express the tremendous potential the tool has in their respective fields. But the potentials are always projected far in the future, and the tool remains just a concept. This is justifiable because the quality of the visual experience is so much less than what people are used to seeing; high definition television, breathtaking special cinematographic effects and photorealistic computer renderings. Instead, the models in virtual environments are very simple looking; they are made of small spaces, filled with simple or abstract looking objects of little color distinctions as seen through displays of noticeably low resolution and at an update rate which leaves much to be desired. Clearly, for most applications, the requirements of precision have not been met yet with virtual interfaces as they exist today. However, there are a few domains where the relatively low level of the technology could be perfectly appropriate. In general, these are applications which require that the information be presented in symbolic or representational form. Having studied architecture, I knew that there are moments during the early part of the design process when conceptual decisions are made which require precisely the simple and representative nature available in existing virtual environments.
series	journal paper
last changed	2003/04/23 15:14

_id	c05c
authors	Hovestadt, Ludger
year	1993
title	A4 Digital Building: Extensive Computer Support for Building Design, Construction, and Management
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 405-421
summary	The integrated design, construction, and management of buildings are described as being of unlimited complexity. The data structures required to support these tasks cannot be predefined and have- to be worked out during the design process. An instrument that integrates weakly and strongly structured data is necessary. A4 proposes - as a minimal structuring mechanism - the position of information in a dataspace. It offers diverse additional and optional structuring mechanisms. Examples from different domains show the particular strengths of the A4 integration model.
keywords	Architecture, Intelligent Building, CAD, Multi-Media, Hypermedia, Active Objects, Virtual Reality, Multi-User, Expert System, Case-Based Reasoning, Communication, Data-Mining
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	fda4
authors	Jalkanen, Janne
year	2000
title	Building a spatially immersive display - HUTCAVE
source	Helsinki University of Technology, Espoo, Finland
summary	A spatially immersive display is a display that surrounds the user, thus removing or alleviating many disadvantages the common virtual reality systems, such as head-mounted displays have. The most common example of these spatially immersive displays is the CAVE, "CAVE Automatic Virtual Environment", first built at University of Illinois, in 1993. It combines a large field-of-view with high-resolution images and a high frame refresh rate. In this work, the current Virtual Reality (VR) and Virtual Environment (VE) systems are examined, and then the CAVE construction is presented. Principles of stereo vision are explained and current methods of obtaining both autostereoscopic and stereopsis-based vision are reviewed. Aspects of different projection methods, screens, mirrors, projectors, tracking equipment, and computing systems are examined. Also, recent work in CAVE audio, so far neglected in research, is presented. Some of the mathematics is also explained, since in most CAVE-systems some sort of optical folding is necessary. Two cases of CAVE construction are presented, both at the Helsinki University of Technology. The first is a single-wall installation built as a temporary system, and the second is a four-sided CAVE at a new location, superseding the temporary installation. Finally the conclusions are presented, both from the process management point of view, and from the technical point of view, examining the good and bad points of the chosen solutions.
series	thesis:MSc
last changed	2003/02/12 22:37

_id	caadria2003_a5-1
id	caadria2003_a5-1
authors	Knight, Michael W. and Brown, Andre G.P.
year	2003
title	NAVRgate X, A Naturalistic Navigation Metaphor for Large Scale Virtual Environments
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 625-630
doi	https://doi.org/10.52842/conf.caadria.2003.625
summary	This paper describes the latest in a series of real-world, low-cost interfaces for virtual reality. nAVRgate (the AVR being Architectural Virtual Reality) has looked at real-world analogies for interfacing with 'real' virtual environments in an attempt to improve the sense of presence, the phenomenon of sense of presence in virtual environments (VEs) often being seen as the real essence of Virtual Reality (Laurel, 1993)
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	97e7
authors	Carter, K.
year	1993
title	Computer aided design: back to the drawing board
source	Proc. of Creativity and Cognition, Loughborough, April
summary	This paper argues that the role of Computer Aided Design (CAD) should be to enhance and extend paper-based working, rather than to replace it. Current CAD tools are little used in the early stages of designing. Paper is heavily used, with its physical properties supporting work practices that are not possible with CAD. This paper presents implications for the design of new computer-based tools drawn from observations of designers' work practices. A new system is described that integrates paper-based and computer-based working in the same physical space and supports the application of computation to images on paper.
series	other
last changed	2003/04/23 15:50

_id	ec51
authors	Jakimowicz, Adam
year	1993
title	The Architect and CAD - A Question of Creativity,
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.d4g
summary	This paper shows some efforts to touch and approach the problem of creation in architecture and think of importance of its tools.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	sigradi2014_164
id	sigradi2014_164
authors	Moroni Dotoranda, Janaina Luisa da Silva; Paulo Edi Rivero Martins, Dr.Giuseppe Lotti
year	2014
title	Estilo de herramientas didácticas que favorecen la creatividad. Tema: Nuevas metodologías de aprendizaje
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 245-249
summary	Creativity is an important factor for innovators. According to Eguchi and Pinheiro (2008) the basis of design is innovation because of the use creative methodology. It’s important to remember that the word “project” comes from the Latin “proyectus”, meaning “a forward throwing action”. According to Ramos (2006), “educating for creativity is essential.” Beetlestone (2000), De Bono (1993), Munari (1997) and Pawlak (2000) argue that as we’re children we’re curious to find answers to everything, but that traditional schooling brakes the creativity. This research is a methodological test which aims to identify the reasons for student’s selection of specific creative tools used in university projects.
keywords	Creativity; Innovation; Design; Education; Freedom
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	20c1
authors	Alavalkama, Ilkka
year	1993
title	Technical Aspects of the Urban Simulator in Tampere University of Technology
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 35-46
summary	The colour video recording Urban Simulator in TUT was built very early compared with the development of video systems. A contract for planning the simulator electronics, mechanics and camera systems was made in january 1978 with two TUT students: Jani Granholm (computer science and engineering) and Ilkka Alavalkama (machine design and automation). Ease of control and maintenance were asked by side of ”human movement inside coloured small-scale architectural models”. From the beginning, all components of the system were carefully tested and chosen from various alternatives. Financial resources were quite limited, which lead to a long building process and to self-planned and produced mechanical and electronical elements. Some optical systems were constructed by using elements from various manufacturers.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	d6a3
authors	Alkhoven, Patricia
year	1993
title	The Changing Image of the City
source	University of Utrecht
summary	The image and structure of a town are constantly subject to a dynamic process of change and continuity. Visual material, such as photographs, historical maps, town plans, drawings and prints, show us the impact of these changes on the image of a town. The main point of departure of this study stems from the question of how this process of change and continuity is visually detectable in a town or city. The fact that the ideas about the appearance of a city (gradually) change, can be read from the often subtle changes in the townscape. Though in many cases we have a general knowledge of the choices made in urban management, the most difficult problem is to detect the underlying decisions. This raises the question to what extent these changes and also the continuities are the result of deliberate choices in urban management and to what extent they are autonomous developments in the townscape resistant to interventions. Using different kinds of visual information as a basis, computer visualization techniques are used in the present study to examine some cartographic maps and to reconstruct the urban development in the twentieth century of the town of Heusden three-dimensionally in significant phases. The resulting visualization provides us with a tool for a better understanding of the dynamics of urban transformation processes, typologies and morphological changes and continuities.
keywords	3D City Modeling
series	thesis:PhD
email
more	http://www.library.uu.nl/digiarchief/dip/diss/01754573/hfdheus.htm
last changed	2003/05/15 21:36

_id	3653
authors	Alshawi, M. and Budeiri, M.J.
year	1993
title	An Integrated approach for 3D simulation of construction sequence
source	The Int. Journal of Construction IT 1(2), pp. 35-46
summary	In order to eliminate design-related problems and to ease planning difficulties, a new integrated approach is required to manage and present design and construction information. This paper examines the feasibility of integrating design and construction scheduling information produced by 'industry standard' software. It describes the structure of a prototype which has been developed to generate a 3D simulation model for the construction sequence by integrating a CAD package with a project planning software. This study aims at establishing an integrated approach to communicate construction planning graphically to users (designers or construction managers) prior to construction in order to enhance the efficiency of the design/construction process.
series	journal paper
last changed	2003/05/15 21:45

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

For more results click below: