CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 250

_id 0ffe
authors Bhat, R.R., Gauchel, J. and Van Wyk, S.
year 1993
title Communication in Cooperative Building Design
source CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 481-493
summary This paper addresses communication issues, which are crucial in any implementation of distributed design environments. Communication needs are specified and implemented in a prototype based on a modular knowledge-based approach for simulation of a distributed multi-user system. The results of these simulations are reported, which show communication to be scalable as the numbers of applications and the size of the design increases. Finally, the implications of the results on real distributed systems are discussed.
keywords Building Design, Distributed Design Environments, Cooperative Design, Communication
series CAAD Futures
last changed 2003/11/21 15:16

_id 08fc
authors Darken, R.P. and Sibert, J.L.
year 1993
title A toolset for navigation in virtual environments
source Proceedings of the ACM User Interface Software and Technology, pp.157-165
summary Maintaining knowledge of current position and orientation is frequently a problem for people in virtual environments. In this paper we present a toolset of techniques based on principles of navigation derived from real world analogs. We include a discussion of human and avian navigation behaviors and show how knowledge about them were used to design our tools. We also summarize an informal study we performed to determine how our tools influenced the subjects' navigation behavior. We conclude that principles extracted from real world navigation aids such as maps can be seen to apply in virtual environments.
series other
last changed 2003/04/23 15:14

_id c05c
authors Hovestadt, Ludger
year 1993
title A4 Digital Building: Extensive Computer Support for Building Design, Construction, and Management
source CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 405-421
summary The integrated design, construction, and management of buildings are described as being of unlimited complexity. The data structures required to support these tasks cannot be predefined and have- to be worked out during the design process. An instrument that integrates weakly and strongly structured data is necessary. A4 proposes - as a minimal structuring mechanism - the position of information in a dataspace. It offers diverse additional and optional structuring mechanisms. Examples from different domains show the particular strengths of the A4 integration model.
keywords Architecture, Intelligent Building, CAD, Multi-Media, Hypermedia, Active Objects, Virtual Reality, Multi-User, Expert System, Case-Based Reasoning, Communication, Data-Mining
series CAAD Futures
email
last changed 2003/05/16 20:58

_id a944
authors Maher, M.L., Gero, J.S. and Saad, M.
year 1993
title Synchronous Support and Emergence in Collaborative CAAD
source CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 455-470
summary Design is rarely an activity that is commenced and completed by an individual The more common design environment is one in which teams of designers work together towards a final solution. In this paper we consider issues involved in the development of computer-based design environments in which teams of design professionals can collaborate, focusing on the need for visual and underlying representations which can support multiple interpretations. We consider the environment as providing a shared workspace which facilitates both communication and progression of design ideas, concepts, and drawings. In the environment presented here, the shared workspace has two foci: the workspace that designers see and interact with, and the workspace that provides an underlying computer-based representation for persistent memory. The emphasis is on providing representations that support emergence that occurs during collaboration.
keywords Collaborative Design, Team Design, Multi-User Synchronous CAAD, Shared Representation, Shared Workspace, Emergence
series CAAD Futures
email
last changed 2003/05/16 20:58

_id cf2011_p093
id cf2011_p093
authors Nguyen, Thi Lan Truc; Tan Beng Kiang
year 2011
title Understanding Shared Space for Informal Interaction among Geographically Distributed Teams
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 41-54.
summary In a design project, much creative work is done in teams, thus requires spaces for collaborative works such as conference rooms, project rooms and chill-out areas. These spaces are designed to provide an atmosphere conducive to discussion and communication ranging from formal meetings to informal communication. According to Kraut et al (E.Kraut et al., 1990), informal communication is an important factor for the success of collaboration and is defined as “conversations take place at the time, with the participants, and about the topics at hand. It often occurs spontaneously by chance and in face-to-face manner. As shown in many research, much of good and creative ideas originate from impromptu meeting rather than in a formal meeting (Grajewski, 1993, A.Isaacs et al., 1997). Therefore, the places for informal communication are taken into account in workplace design and scattered throughout the building in order to stimulate face-to-face interaction, especially serendipitous communication among different groups across disciplines such as engineering, technology, design and so forth. Nowadays, team members of a project are not confined to people working in one location but are spread widely with geographically distributed collaborations. Being separated by long physical distance, informal interaction by chance is impossible since people are not co-located. In order to maintain the benefit of informal interaction in collaborative works, research endeavor has developed a variety ways to shorten the physical distance and bring people together in one shared space. Technologies to support informal interaction at a distance include video-based technologies, virtual reality technologies, location-based technologies and ubiquitous technologies. These technologies facilitate people to stay aware of other’s availability in distributed environment and to socialize and interact in a multi-users virtual environment. Each type of applications supports informal interaction through the employed technology characteristics. One of the conditions for promoting frequent and impromptu face-to-face communication is being co-located in one space in which the spatial settings play as catalyst to increase the likelihood for frequent encounter. Therefore, this paper analyses the degree to which sense of shared space is supported by these technical approaches. This analysis helps to identify the trade-off features of each shared space technology and its current problems. A taxonomy of shared space is introduced based on three types of shared space technologies for supporting informal interaction. These types are named as shared physical environments, collaborative virtual environments and mixed reality environments and are ordered increasingly towards the reality of sense of shared space. Based on the problem learnt from other technical approaches and the nature of informal interaction, this paper proposes physical-virtual shared space for supporting intended and opportunistic informal interaction. The shared space will be created by augmenting a 3D collaborative virtual environment (CVE) with real world scene at the virtual world side; and blending the CVE scene to the physical settings at the real world side. Given this, the two spaces are merged into one global structure. With augmented view of the real world, geographically distributed co-workers who populate the 3D CVE are facilitated to encounter and interact with their real world counterparts in a meaningful and natural manner.
keywords shared space, collaborative virtual environment, informal interaction, intended interaction, opportunistic interaction
series CAAD Futures
email
last changed 2012/02/11 19:21

_id 4dd6
authors Bhavnani, S.K., Garrett, J. and Shaw, D.S.
year 1993
title Leading Indicators of CAD Experience
source CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 313-334
summary Current interfaces and help facilities of CAD systems are not designed to respond to a user's performance. To develop such adaptive environments, a better understanding of the indicators of CAD experience is required. This paper discusses the results of studying behavior patterns of different types and levels of CAD users for a specific drawing task. The results show that the type and experience of the CAD user has a clear correlation to the pattern of commands used, the time taken, and the quality of drawing produced. By using the experimental data to train a neural network, the paper demonstrates a connectionist approach for experience assessment. This information, it is proposed, can provide input to an adaptive interface which generates unobtrusive interception to improve the performance of a CAD user. Future experiments to explore the issues of generality and interception are presented.
keywords CAD user Modeling, Adaptive Interface, Neural Networks
series CAAD Futures
email
last changed 2003/11/21 15:16

_id aa7f
authors Bollinger, Elizabeth and Hill, Pamela
year 1993
title Virtual Reality: Technology of the Future or Playground of the Cyberpunk?
source Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 121-129
doi https://doi.org/10.52842/conf.acadia.1993.121
summary Jaron Lanier is a major spokesperson of our society's hottest new technology: VR or virtual reality. He expressed his faith in the VR movement in this quote which appears in The User's Guide to the New Edge published by Mondo 2000. In its most technical sense, VR has attracted the attention of politicians in Washington who wonder if yet another technology developed in the United States will find its application across the globe in Asia. In its most human element, an entire "cyberpunk movement" has appealed to young minds everywhere as a seemingly safe form of hallucination. As architecture students, educators, and practitioners around the world are becoming attracted to the possibilities of VR technology as an extension of 3D modeling, visualization, and animation, it is appropriate to consider an overview of virtual reality.

In virtual reality a user encounters a computersimulated environment through the use of a physical interface. The user can interact with the environment to the point of becoming a part of the experience, and the experience becomes reality. Natural and

instinctive body movements are translated by the interface into computer commands. The quest for perfection in this human-computer relationship seems to be the essence of virtual reality technology.

To begin to capture the essence of virtual reality without first-hand experience, it is helpful to understand two important terms: presence and immersion. The sense of presence can be defined as the degree to which the user feels a part of the actual environment. The more reality the experience provides, the more presence it has. Immersion can be defined as the degree of other simulation a virtual reality interface provides for the viewer. A highly immersive system might provide more than just visual stimuli; for example, it may additionally provide simulated sound and motion, and simultaneously prevent distractions from being present.

series ACADIA
email
last changed 2022/06/07 07:52

_id 6737
authors Casaus, A., Fargas, J. and Papuzian, P.
year 1993
title Hybrid Design Environments - A Research Program on Creative Collaboration and Communication
source [eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi https://doi.org/10.52842/conf.ecaade.1993.x.a8h
summary This paper gives an overview of a research program initiated in the Architectural Design Department of the Escola Tècnica Superior d'Arquitectura de Barcelona on issues of communication and collaboration in computer aided design. The work is centered around emerging design situations which can be attributed directly to the incorporation of new technologies in education and practice. One of these is the "design triangle" composed of a traditional designer, a CAD workstation and a computer literate collaborator acting as the design medium. Another is the "virtual workshop" consisting of design collaboration involving large-scale distributed communications networks. The research program stresses three common characteristics of these situations which it aims to study in parallel in the setting of an design workshop. The first of these is the characteristic of distance, both physical and conceptual, which separates, on the one hand, the traditional designer from the CAD document and, on the other, the participants of a distributed workshop from each other and each others' thinking. The second, is the typically hybrid nature of such situations where computer technology interacts with more traditional techniques and alternative media are combined both at the level of production and in channels and modes of communication. And finally, the third and most significant for the methodology of the research program, is the fact that both the design triangle and the virtual workshop make explicit aspects of design activity, interaction and intentions which remain hidden or are only implicit in traditional designing.

series eCAADe
email
last changed 2022/06/07 07:50

_id 42ab
authors Dagit, Charles E.
year 1993
title Establishing Virtual Design Environments in Architectural Practice
source CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 513-522
summary This paper attempts to specify the ideal computerized architectural design tool and outlines steps that are being taken to make this ideal a reality. Section 2 offers a user-centered assessment of the way technology is currently implemented in the design professions. Section 3 describes the state-of-the-art in high-end CAAD applications, including computer rendering, walk-through displays, and expert diagnostic sysWins. Section 4 details work in progress at Worldesign, Inc., a virtual worlds systems integration firm, which is developing Virtual Design Environment (VDE) systems.
keywords Computer-Aided Architectural Design (CAAD), Computer-Aided Engineering (CAE), Virtual Worlds Technology, Visualization, Computer Generated Environments, Computer Modeling, Virtual Reality, Information Systems, Information Design
series CAAD Futures
last changed 1999/04/07 12:03

_id ddss9214
id ddss9214
authors Friedman, A.
year 1993
title A decision-making process for choice of a flexible internal partition option in multi-unit housing using decision theory techniques
source Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary Recent demographic changes have increased the heterogeneity of user groups in the North American housing market. Smaller households (e.g. elderly, single parent) have non-traditional spatial requirements that cannot be accommodated within the conventional house layout. This has created renewed interest in Demountable/Flexible internal partition systems. However, the process by which designers decide which project or user groups are most suited for the use of these systems is quite often complex, non-linear, uncertain and dynamic, since the decisions involve natural processes and human values that are apparently random. The anonymity of users when mass housing projects are conceptualized, and the uncertainty as to the alternative to be selected by the user, given his/her constantly changing needs, are some contributing factors to this effect. Decision Theory techniques, not commonly used by architects, can facilitate the decision-making process through a systematic evaluation of alternatives by means of quantitative methods in order to reduce uncertainty in probabilistic events or in cases when data is insufficient. The author used Decision Theory in the selection of flexible partition systems. The study involved a multi-unit, privately initiated housing project in Montreal, Canada, where real site conditions and costs were used. In this paper, the author outlines the fundamentals of Decision Theory and demonstrates the use of Expected Monetary Value and Weighted Objective Analysis methods and their outcomes in the design of a Montreal housing project. The study showed that Decision Theory can be used as an effective tool in housing design once the designer knows how to collect basic data.
series DDSS
last changed 2003/08/07 16:36

_id 2979
authors Henry, D. and Furness, T.A.
year 1993
title Spatial Perception in Virtual Environments: Evaluating an Architectural Application
source IEEE Virtual Reality Annual International Symposium, 1993, Seattle
summary Over the last several years, professionals from many different fields have come to the Human Interface Technology Laboratory (H.I.T.L) to discover and learn about virtual environments. In general, they are impressed by their experiences and express the tremendous potential the tool has in their respective fields. But the potentials are always projected far in the future, and the tool remains just a concept. This is justifiable because the quality of the visual experience is so much less than what people are used to seeing; high definition television, breathtaking special cinematographic effects and photorealistic computer renderings. Instead, the models in virtual environments are very simple looking; they are made of small spaces, filled with simple or abstract looking objects of little color distinctions as seen through displays of noticeably low resolution and at an update rate which leaves much to be desired. Clearly, for most applications, the requirements of precision have not been met yet with virtual interfaces as they exist today. However, there are a few domains where the relatively low level of the technology could be perfectly appropriate. In general, these are applications which require that the information be presented in symbolic or representational form. Having studied architecture, I knew that there are moments during the early part of the design process when conceptual decisions are made which require precisely the simple and representative nature available in existing virtual environments.
series journal paper
last changed 2003/04/23 15:14

_id 54cc
authors Kalawsky, R.
year 1993
title The Science of Virtual Reality and Virtual Environments
source Addison-Wesley, Cambridge, UK
summary This book goals hits basic idea: giving a review on Virtual Reality and on the theory at its basis. Starting from history, going trought science as medicine, arriving at technical stuff this is in syntesis this book. For everyone interested in "How it work?". Only one problem : sometimes is too difficoult to understand at no graduate persons dues to hi level techincal explanations in particoular in display chapter
series other
last changed 2003/04/23 15:14

_id caadria2003_a5-1
id caadria2003_a5-1
authors Knight, Michael W. and Brown, Andre G.P.
year 2003
title NAVRgate X, A Naturalistic Navigation Metaphor for Large Scale Virtual Environments
source CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 625-630
doi https://doi.org/10.52842/conf.caadria.2003.625
summary This paper describes the latest in a series of real-world, low-cost interfaces for virtual reality. nAVRgate (the AVR being Architectural Virtual Reality) has looked at real-world analogies for interfacing with 'real' virtual environments in an attempt to improve the sense of presence, the phenomenon of sense of presence in virtual environments (VEs) often being seen as the real essence of Virtual Reality (Laurel, 1993)
series CAADRIA
email
last changed 2022/06/07 07:51

_id 98bd
authors Pea, R.
year 1993
title Practices of Distributed Intelligence and Designs for Education
source Distributed Cognitions, edited by G. Salomon. New York, NY: CambridgeUniversity Press
summary v Knowledge is commonly socially constructed, through collaborative efforts... v Intelligence may also be distributed for use in designed artifacts as diverse as physical tools, representations such as diagrams, and computer-user interfaces to complex tasks. v Leont'ev 1978 for activity theory that argues forcibly for the centrality of people-in-action, activity systems, as units of analysis for deepening our understanding of thinking. v Intelligence is distributed: the resources that shape and enable activity are distributed across people, environments, and situations. v Intelligence is accomplished rather than possessed. v Affordance refers to the perceived and actual properties of a thing, primarily those functional properties that determine how the thing could possibly be used. v Norman 1988 on design and psychology - the psychology of everyday things" v We deploy effort-saving strategies in recognition of their cognitive economy and diminished opportunity for error. v The affordances of artifacts may be more or less difficult to convey to novice users of these artifacts in the activities to which they contribute distributed intelligence. v Starts with Norman's seven stages of action Ø Forming a goal; an intention § Task desire - clear goal and intention - an action and a means § Mapping desire - unable to map goal back to action § Circumstantial desire - no specific goal or intention - opportunistic approach to potential new goal § Habitual desire - familiar course of action - rapidly cycle all seven stages of action v Differentiates inscriptional systems from representational or symbol systems because inscriptional systems are completely external, while representational or symbol systems have been used in cognitive science as mental constructs. v The situated properties of everyday cognition are highly inventive in exploiting features of the physical and social situation as resources for performing a task, thereby avoiding the need for mental symbol manipulations unless they are required by that task. v Explicit recognition of the intelligence represented and representable in design, specifically in designed artifacts that play important roles in human activities. v Once intelligence is designed into the affordances properties of artifacts, it both guides and constrains the likely contributions of that artifact to distributed intelligence in activity. v Culturally valued designs for distributed intelligence will change over time, especially as new technology becomes associated with a task domain. v If we treat distributed intelligence in action as the scientific unit of analysis for research and theory on learning and reasoning... Ø What is distributed? Ø What constraints govern the dynamics of such distributions in different time scales? Ø Through what reconfigurations of distributed intelligence might the performance of an activity system improve over time? v Intelligence is manifest in activity and distributed in nature. v Intelligent activities ...in the real world... are often collaborative, depend on resources beyond an individual's long-term memory, and require the use of information-handling tools... v Wartofsky 1979 - the artifact is to cultural evolution what the gene is to biological evolution - the vehicle of information across generations. v Systems of activity - involving persons, environment, tools - become the locus of developmental investigation. v Disagrees with Salomon et al.'s entity-oriented approach - a language of containers holding things. v Human cognition aspires to efficiency in distributing intelligence - across individuals, environment, external symbolic representations, tools, and artifacts - as a means of coping with the complexity of activities we often cal "mental." "
series other
last changed 2003/04/23 15:14

_id 8ce2
authors Szalapaj, Peter J.
year 1993
title Contextual Hypermedia in the Design Studio
source [eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi https://doi.org/10.52842/conf.ecaade.1993.x.i7f
summary The focus of this paper is on the development and use of hypermedia applications for the presentation of design studio projects, based upon the author's own recent experience of teaching CAD at both undergraduate and postgraduate level. The contention of this paper is that this activity cannot be reduced to routine Hypercard stack development. Instead, the development of applications in this area need to give support to the expression of the design-theoretical issues that are central to the presentation of any design studio project, by exploiting the many issues of concern that are emerging from the field of human- computer interaction (HCI) The hypermedia application i.e. in this case design-theoretical views of a design project, will inevitably influence the specification of a user-interface, and hence the presentation and appearance of the design project. This paper will investigate the extent to which the interface can be separated out from the application and the converse issue namely, whether non-contextual hypermedia environments restrict design applications.

series eCAADe
email
last changed 2022/06/07 07:50

_id 6637
authors Ward, D., Brown, A.G.P. and Horton, F.F.
year 1994
title A Design Assistant for Environmental Optimisation of Buildings
source The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 247
doi https://doi.org/10.52842/conf.ecaade.1994.x.u0s
summary The dual function of the Environmental Design Assistant which we have developed is to act firstly as a teaching aid and secondly as a design aid. In terms of it's role as a design assistant it is similar in nature to the application described by Papamichael, K, in Novitski, B. J. (1993). However, the work described here forms part of an overall strategy to develop a user friendly design assistant across the spectrum of Architectural design disciplines: this is one particular strand of the project. One aim embodied in the development of the environmental design assistant has been the pragmatic one of the production and refining of a tool to perform environmental assessments of buildings in accordance with the British recommendations made in BREEAM (Building Research Establishment Energy Assessment Method). In this respect the assistant allows for the consequences of design decisions to be readily assessed and then for those decisions to be modified. The Assistant has undergone a series of refinements to make it more user-friendly, efficient and appropriate as an Architectural design aid; and this has been the second aim of the project. The project has acted as a vehicle for the application of design principles applied to the presentation, information structuring and navigation associated with Hypermedia and Multimedia products. We are applying the kind of good design principles which have been summarised well by Schulmeister, R. (1994). These principles include Ariadne's Thread (paths for navigation), Lost in Hyperspace (backward navigation), More-than-browsing (interaction) and Tutoring (providing feedback to the user). Adoption of such principles is, we believe, essential in order to realise the potential of Hypermedia tools. The principal development tool for the work has been SuperCard. This has been used in conjunction with a range of other software including ArchiCad and Intellidraw and a range of image grabbing devices.

series eCAADe
email
last changed 2022/06/07 07:50

_id 850a
authors Wexelblat, A. (Ed.)
year 1993
title Virtual Reality - Applications and Explorations
source Academic Press Professional
summary Virtual and Artificial Reality have become in the last few years one of the major new hype words. Subsequently there has been a plethora of glossy books and droll conference proceedings describing various systems and hardware implementation problems. As has always been discovered in computer science the major effort is in designing and building the software applications. Alan's aim has been to ignore the hardware side and concentrate on the far larger and almost impossible problem of what to do with it. This book is a collection of ten essays trying to look slightly into the future and define actual uses for Virtual Reality kits rather than showing off expensive hardware. This has resulted in a series of topics, each defines a different interface problem between the user and machine which may have some solution by using Virtual Reality. Even though the topics vary, at times drastically, Alan has managed to use editorial selection very well intertwining them into a reasonably coherent whole. The scope is too large for any single book to cover in any detail and as is inevitable important topics for example military and medicine have been excluded. Topics chosen range from traditional computer information database visualisation to planetary exploration to the Virtual Reality version of the music video and literacy in cyberspace.
series other
last changed 2003/04/23 15:14

_id avocaad_2001_16
id avocaad_2001_16
authors Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year 2001
title Some Phenomena of Spatial Characteristics of Cyberspace
source AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary "Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series AVOCAAD
email
last changed 2005/09/09 10:48

_id 855d
authors Alavalkama, I., Aura, S. and Palmqvist H. (Eds.)
year 1993
title Endoscopy as a Tool in Architecture
source Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3 / Tampere (Finland), 25-28 August 1993, 196 p.
summary The European Architectural Endoscopy Association was established in connection with the Association’s first international conference on August 25-28, 1993, which was hosted by the Department of Architecture at the Tampere University of Technology. The purpose of the EAEA is to promote experimentation, research, communication, exchange of experiences, collaboration, user participation and teaching in the field of endoscopy and environmental simulation. The first EAEA conference was attended by 25 people from 15 different universities. Working under the general heading of “Endoscopy as a Tool in Architecture”, the conference had three specific themes for the first three days: Review of Existing Laboratories; Theories, Methods and Applications; and the Future of Endoscopy. In this volume we have compiled all the papers that were presented at the conference. The texts have been printed in the form we received them, without any attempt to edit them for consistency in style, adding hopefully to a sense of authenticity. Unfortunately, the impressive videos we saw at the conference on the possibilities of endoscopy and environmental simulation as a tool in architecture, cannot be documented here.

keywords Architectural Endoscopy
series EAEA
email
more http://info.tuwien.ac.at/eaea/
last changed 2005/09/09 10:43

_id 2ff9
id 2ff9
authors Ataman, Osman
year 1993
title Knowledge-based Stair Design
source Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 163-171
doi https://doi.org/10.52842/conf.acadia.1993.163
summary The application of computer--based technique to support architectural design has often concentrated on matters of representation. Typically, this means computer-aided drafting, and less frequently, computer-aided modeling and visualization. The promise of new computer-based tools to support the process of design has thus far failed to produce any significant tool that has had a widespread impact on the architectural profession. Most developments remain in university based research labs where they are used as teaching instruments in CAD courses or less often in design studios. While there are many reasons for this lack of dissemination, including a reluctance on the part of the architectural profession itself, the primary obstacles deal with difficulties in explicating design knowledge, representing this knowledge in a manner that can be used for design, and providing an intuitive and effective user interface, allowing the designer to easily use the tool for its intended purpose.

This study describes a system that has been developed to address a number of these issues. Based on research findings from the field of Artificial Intelligence which expounds on the need for multiple techniques to represent any complex area of knowledge, we have selected a particular approach that focuses on multiple techniques for design representation. We review this approach in depth by considering its many facets necessary when implementing a knowledge-based system. We then partially test the viability of this approach through a small case study, implementing a knowledge-based system for designing stairs. While this effort only deals with a small part of the total design process, it does explore a number of significant issues facing the development of computer-based design assistants, and suggests several techniques for addressing these concerns.

series ACADIA
email
last changed 2022/06/07 07:54

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 12HOMELOGIN (you are user _anon_14085 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002