Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 256

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	ddss9209
id	ddss9209
authors	De Gelder, J.T. and Lucardie, G.L.
year	1993
title	Knowledge and data modelling in cad/cam applications
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Modelling knowledge and data in CAD/CAM applications is complex because different goals and contexts have to be taken into account. This complexity makes particular demands upon representation formalisms. Today many modelling tools are based on record structures. By analyzing the requirements for a product model of a portal structure in steel, this paper shows that in many situations record structures are not well suited as a representation formalism for storing knowledge and data in CAD/CAM applications. This is illustrated by performing a knowledge-level analysis of the knowledge and data generated in the design and manufacturing process of a portal structure in steel.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9205
id	ddss9205
authors	De Scheemaker. A.
year	1993
title	Towards an integrated facility management system for management and use of government buildings
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The Government Building Agency in the Netherlands is developing an integrated facility management system for two of its departments. Applications are already developed to support a number of day-to-day facility management activities on an operational level. Research is now being carried out to develop a management control system to better plan and control housing and material resources.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9206
id	ddss9206
authors	Drach, A., Langenegger, M. and Heitz, S.
year	1993
title	Working with prototypes: from cad to flexible tools for integrated building design
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The formulation of design knowledge as concepts, goals and rules cannot be captured in fixed and valid statements. The dynamic modelling of concepts and goals is, on the contrary, part of the design process itself. Tools that effectively support architects in their design should therefore never use predefined mechanisms, but must be definable interactively according to design specifications. We propose the concept of prototypes as a cognitive model to represent and structure design knowledge. Prototypes incorporate an individual view of design in a synthetic and organizational model for a defined area of interest. They actively control and guide design processes in supporting the organizational concepts for solutions. The a+Tool implements these concepts on the basis of a modelling language. It provides a dynamic toolkit and user interface to support design as well as knowledge modelling.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9426
id	ddss9426
authors	Duijvestein, Kees
year	1994
title	Integrated Design and Sustainable Building
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In the international student-project "European Environmental Campus 91 TU Delft Dordrecht" 20 students from 13 European countries worked in september 1991, during three weeks on "EcologicalSketches for the Island of Dordrecht". They worked on four different scales: the region isle of Dordt / the district Stadspolders / the neighbourhood I the house and the block. The environmentaltheme's Energy, Water, Traffic & Noise, Landscape & Soil were together with spatial analyses combined with the different scales. This combination was organised following the scheme mentioned below. The characters stand for the students. During the first period they worked in research groups, during the last period more in design groups. For instance: student L works in the beginning with the students B, G and Q in the research group water. In the last period sheworks with K, M, N and 0 in the design group Neighbourhood. Those students worked earlier in the other research-groups and contribute now in the design-group their thematic environmental knowledge. The results were presented to the Dordrecht council, officials and press. In the next project in september and october 1993 we started earlier with the design groups. Ten Dutch and ten "Erasmus" students worked for six weeks on proposals for the Vinex location Wateringenthe Hague. Each morning they worked in the research groups each afternoon in the design groups. The research groups used the EcoDesign Tools, small applications in Excel on Apple Macintoshto quantify the environmental pressure.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9214
id	ddss9214
authors	Friedman, A.
year	1993
title	A decision-making process for choice of a flexible internal partition option in multi-unit housing using decision theory techniques
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Recent demographic changes have increased the heterogeneity of user groups in the North American housing market. Smaller households (e.g. elderly, single parent) have non-traditional spatial requirements that cannot be accommodated within the conventional house layout. This has created renewed interest in Demountable/Flexible internal partition systems. However, the process by which designers decide which project or user groups are most suited for the use of these systems is quite often complex, non-linear, uncertain and dynamic, since the decisions involve natural processes and human values that are apparently random. The anonymity of users when mass housing projects are conceptualized, and the uncertainty as to the alternative to be selected by the user, given his/her constantly changing needs, are some contributing factors to this effect. Decision Theory techniques, not commonly used by architects, can facilitate the decision-making process through a systematic evaluation of alternatives by means of quantitative methods in order to reduce uncertainty in probabilistic events or in cases when data is insufficient. The author used Decision Theory in the selection of flexible partition systems. The study involved a multi-unit, privately initiated housing project in Montreal, Canada, where real site conditions and costs were used. In this paper, the author outlines the fundamentals of Decision Theory and demonstrates the use of Expected Monetary Value and Weighted Objective Analysis methods and their outcomes in the design of a Montreal housing project. The study showed that Decision Theory can be used as an effective tool in housing design once the designer knows how to collect basic data.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9207
id	ddss9207
authors	Gauchel, J., Hovestadt, L., van Wyk, S. and Bhat, R.R.
year	1993
title	Modular building models
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The development and implementation of a modular building model appropriate for computer aided design is described. The limitations of a unified building model with regard to concurrence and complexity in design is discussed. Current research suggests that to model real-world complexity, one must trade centralized control for autonomy. In this paper we develop a modular approach to building modelling that is based on object-oriented autonomy and makes it possible to define these models in a distributed concurrent manner. Such a modular and autonomous implementation brings inherent uncertainty and conflict which cannot be determined a priori.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9211
id	ddss9211
authors	Gilleard, J. and Olatidoye, O.
year	1993
title	Graphical interfacing to a conceptual model for estimating the cost of residential construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper presents a method for determining elemental square foot costs and cost significance for residential construction. Using AutoCAD's icon menu and dialogue box' facilities, a non-expert may graphically select (i) residential configuration; (ii) construction quality level; (iii) geographical location; (iv) square foot area; and finally, (v) add-ons, e.g. porches and decks, basement, heating and cooling equipment, garages and carports etc. in order to determine on-site builder's costs. Subsequent AutoLisp routines facilitate data transfer to a Lotus 1-2-3 spreadsheet where an elemental cost breakdown for the project may be determined. Finally, using Lotus 1-2-3 macros, computed data is transferred back to AutoCAD, where all cost significant items are graphically highlighted.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9218
id	ddss9218
authors	Hensen, J.L.M.
year	1993
title	Design support via simulation of building and plant thermal interaction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Design decision support related to building energy consumption and/or indoor climate should be based on an integral approach to the environment, the building, heating, ventilating and air-conditioning (HVAC) system, and the occupants. The tools to achieve this are now available in the form of computer simulation systems which treat the building and plant as an integrated dynamic system. Although its potentials reach beyond the area of Computer Aided Building Design, the paper describes building and plant energy simulation within the context of CABD, design decision support and design evaluation. Currently, computer simulation is only used indirectly as a design decision support mechanism; that is, its power is not delivered very efficiently to the design profession. This paper suggests some future research directions. These are aimed at providing a mechanism to overcome this problem by developing an intelligent front end' which bridges the gap between sophisticated computer simulation tools and the design profession.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9217
id	ddss9217
authors	Kim, Y.S. and Brawne, M.
year	1993
title	An approach to evaluating exhibition spaces in art galleries
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	There are certain building types in which movement of people is the most significant evaluation factor. Among these are art galleries and museums. Unlike other building types, which are often explicated by investigating the relationship between people and people, and between people and the built environment, art galleries and museums are a building type in which the social relationship between people hardly exists and peoples movement through space, that is, the functional relationship between people and space, is one of the most significant factors for their description. The typical museum experience is through direct, sequential, and visual contact with static objects on display as the visitor moves. Therefore, the movement pattern of the visitors must exert a significant influence on achieving the specific goal of a museum. There is a critical need for predicting the consequences of particular spatial configurations with respect to visitors movement. In this sense, it is the intention of this paper to find out the relationship between the spatial configuration of exhibition space and the visitors' movement pattern.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9202
id	ddss9202
authors	Koutamanis, A. and Mitossi, V.
year	1993
title	Architectural computer vision: Automated recognition of architectural drawings
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Computer vision offers the ability to transform digitized drawings into documents that can be used with computer systems. Recognition of digitized drawings can occur at the levels of (a) geometric elements, (b) building elements, and (c) spatial articulation. The last two levels apply not only to digitized images but also to computer-produced ones. The enormous burden placed on the user for inputting and manipulating CAD drawings suggests that automated recognition can add to the capabilities of CAD by making the computer more flexible with respect to inputting design information and more responsive to the actual concerns of the designer.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup9613
id	ddssup9613
authors	Kulkarni, R.G., Stought, R.R. and Haynes, K.E.
year	1996
title	Traffic Flow Landscapes
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Major metropolitan areas and constituent independent jurisdictions face the problem of providing efficient transportation for their residents and in-and out commuters. A typical trip taker spends considerable time on the road to reach the workplace and other destinations. Though it may seem counter-intuitive, adding more links to existing road networks and/or increasing traffic capacity by adding lanes does not necessarily decrease travel times (eg. Braess' paradox). But it is certain that a dense redundant network of roads would provide a trip taker with alternate routes when traffic incidents occur. These types of questions raise the question of, how to evaluate the flow characteristics of the entire road network of a jurisdiction and its larger region in keeping the traffic moving? Further, how may the impact of adding more links/ lanes or the blocking of existing links! lanes be best measured? To answer these and related questions, we propose a methodology to evaluate a fitness criteria for road networks based on Kauffman's biological NK model (1993). We specify a transportation road traffic flow landscape analogous to the fitness landscape of the NK model. Using the transportation road traffic flow landscape we derive a road fitness index that can be used to evaluate either the entire road network's traffic flows or subparts of such network's traffic flows. We explore the possibility of investigating traffic flow landscapes to search for optimal routes to clear traffic. Finally we describe an approach for applying the theoretical framework developed in the paper to the traffic conditions on the road network of the city of Fairfax, Virginia.
keywords	Fitness Landscapes, NK Model, Genotype, Gene, Self-Organization, ITS Technology
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9208
id	ddss9208
authors	Lucardie, G.L.
year	1993
title	A functional approach to realizing decision support systems in technical regulation management for design and construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Technical building standards defining the quality of buildings, building products, building materials and building processes aim to provide acceptable levels of safety, health, usefulness and energy consumption. However, the logical consistency between these goals and the set of regulations produced to achieve them is often hard to identify. Not only the large quantities of highly complex and frequently changing building regulations to be met, but also the variety of user demands and the steadily increasing technical information on (new) materials, products and buildings have produced a very complex set of knowledge and data that should be taken into account when handling technical building regulations. Integrating knowledge technology and database technology is an important step towards managing the complexity of technical regulations. Generally, two strategies can be followed to integrate knowledge and database technology. The main emphasis of the first strategy is on transferring data structures and processing techniques from one field of research to another. The second approach is concerned exclusively with the semantic structure of what is contained in the data-based or knowledge-based system. The aim of this paper is to show that the second or knowledge-level approach, in particular the theory of functional classifications, is more fundamental and more fruitful. It permits a goal-directed rationalized strategy towards analysis, use and application of regulations. Therefore, it enables the reconstruction of (deep) models of regulations, objects and of users accounting for the flexibility and dynamics that are responsible for the complexity of technical regulations. Finally, at the systems level, the theory supports an effective development of a new class of rational Decision Support Systems (DSS), which should reduce the complexity of technical regulations and restore the logical consistency between the goals of technical regulations and the technical regulations themselves.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9215
id	ddss9215
authors	Mortola, E. and Giangrande, A.
year	1993
title	A trichotomic segmentation procedure to evaluate projects in architecture
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper illustrates a model used to construct the evaluation module for An Interface for Designing (AID), a system to aid architectural design. The model can be used at the end of every cycle of analysis-synthesis-evaluation in the intermediate phases of design development. With the aid of the model it is possible to evaluate the quality of a project in overall terms to establish whether the project is acceptable, whether it should be elaborated ex-novo, or whether it is necessary to begin a new cycle to improve it. In this last case, it is also possible to evaluate the effectiveness of the possible actions and strategies for improvement. The model is based on a procedure of trichotomic segmentation, developed with MCDA (Multi-Criteria Decision Aid), which uses the outranking relation to compare the project with some evaluation profiles taken as projects of reference. An application of the model in the teaching field will also be described.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9210
id	ddss9210
authors	Poortman, E.R.
year	1993
title	Ratios for cost control
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The design of buildings takes place in phases representing a development from rough to precision planning. Estimates are made in order to test whether the result is still within the budget set by the client or developer. In this way, the decisions taken during the design phase can be quantified and expressed in monetary terms. To prevent blaming the wrong person when an overrun is discovered, the cost control process has to be improved. For that purpose, two new procedures have been developed: (i) a new translation activity; and (ii) ratios by which quantities can be characterized. 'Translation is the opposite of estimation. A monetary budget is converted -'translated' - into quantities, reflecting the desired quality of the building materials. The financial constraints of the client are thus converted into quantities - the building components used by the designers. Characteristic quantity figures play an important role in this activity. In working out an estimate, the form factor (i.e., the ratio between two characteristic values of a building component) has to be determined. The unit cost is then tested against that ratio. The introduction of the 'translation' activity and the use of characteristic quantity figures and form factors enhance existing estimation methods. By implementing these procedures, cost control becomes considerably more reliable.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9212
id	ddss9212
authors	Prins, M., Bax, M.F.TH., Carp, J.C. and Tempelmans Plat, H.
year	1993
title	A design decision support system for building flexibility and costs
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Because of possible changes in demand, buildings must have some flexibility. In this paper a building model, a financial-economic model and a process model will be presented, which together constitute a design decision support system. This system may be used to decide on flexibility and costs of building variants in all phases of the design process.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9204
id	ddss9204
authors	Pullen, W.R., Wassenaar, C.L.G., van Heti'ema, I., Dekkers, J.T., Janszen, I., Boender, C.G.E., Tas, A. and Stegeman, H.
year	1993
title	A decision support system for housing of (public) organizations
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	In this paper we present a hierarchical decision support system for the allocation of organisations to available buildings, and for the allocation of employees of an organisation to the work units of a building. For both allocation problems a mathematical model and optimisation algorithm is developed, taking into account the relevant criteria, such as the extent to which the allocated floorspace is in accordance with the standards, and the extent to which departments are housed in connecting zones of a building. The decision support system is illustrated by two practical applications.
series	DDSS
last changed	2003/08/07 16:36

_id	4ee4
authors	Rutherford, James H.
year	1993
title	Knodes: Knowledge-Based Design Decision Support
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 357-374
summary	This paper describes the work in progress to develop a knowledge-based design support (KNODES) environment. The KNODES environment is intended to improve a designer's decision making potential, and to assist designers in a broad range of disciplines by making design knowledge and information more accessible. The framework exists as a multi-layered knowledge-based system reflecting both generic and domain specific aspects of the design activity and is designed to: enable the rapid dissemination of new design information, thus responding to shifts in design standards; take advantage of existing empirical design tools in unstructured areas of the design process; accommodate changes in user expectations and technological innovations at both the system and domain levels thus ensuring long term continuity and support,- offer multiple view points of the same design data by means of interchangeable interpreters. A prototype building design framework configured using the KNODES development tools is used to illustrate some of the salient features of the framework. Finally the paper will conclude with some insights into how such a design framework may be used as a knowledge acquisition tool in order to derive and formalise models of the design process.
keywords	Computer-Aided Design, Design Frameworks, Multi-Level Knowledge-based Systems, Blackboard Architecture
series	CAAD Futures
last changed	1999/04/07 12:03

_id	ddss9213
id	ddss9213
authors	Shabha, G.S.
year	1993
title	Development of objective methods for measuring flexibility of school buildings
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This research investigates many problems related to the design for change and flexibility of school buildings. The problem of change proves to be highly complex due to the unpredictability and the difficulty of measuring change. Many deficiencies have been identified in the previous methods concerning lack of indicators for measuring flexibility, reliability and insufficiency of data for indicating change in buildings over use. In the light of the above problems, two main objectives have been established: (i) to propose operational measures of the extent of incorporation of design variables in school designs, and (ii) to propose operational measures of the extent of flexibility of school buildings in use. However, due to the limitations this paper is bound to, the investigation will focus on the second objective. It is anticipated that such operational measures might provide a framework for both architects and researchers, during the early design stage, to ensure that their conjectures about the potential of flexibility might be enhanced during use; hence, improving their prediction of buildings performance over use. This might assist in developing a more coherent objective body of knowledge, which could be fruitfully manipulated during the early design stage to enhance the effectiveness of flexibility in use.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9203
id	ddss9203
authors	Smeets, J.
year	1993
title	Housing tenancy, data management and quality control
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper deals with housing tenancy, data management and quality control. The proposed method is focused on quality characteristics of housing estates in view of rentability risks. It entails a cycle of registration, analysis and implementation of measures. The starting point is the behaviour of the housing consumer in a market-oriented context. The model is framed within theories of strategic management and marketing. Systematic registration and evaluation of consumer behaviour, by means of a set of relevant process and product indicators, can yield relevant information in the four phases of the rental process: orientation, intake, dwelling and exit. This information concerns the way in which the dwelling (characterized by product indicators) fits the needs of the consumer. The systematic analysis of the process and product indicators during the phases of the rental process makes a 'strength-weakness analysis' of housing estates possible. The indicators can be presented in aggregated form by way of a 'rentability index. The 'strength-weakness analysis' steers the intervention in the quality characteristics of housing estates. The possibilities for readjustment, however, are different. The quality control system is not only an early warning system, but also has several other functions: evaluation, planning and communication. The method described here lays a solid foundation for a decision-support system in the area of housing tenancy.
series	DDSS
last changed	2003/08/07 16:36

For more results click below: