Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 255

Reformat results as: short short into frame detailed detailed into frame

_id	eaea2005_000
id	eaea2005_000
authors	Dechène, Sigrun und Manfred Walz (Eds.)
year	2006
title	Motion, E-Motion and Urban Space
source	Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4, 260 p.
summary	Simulating the development and the image of architecture and urban design means to show how the environment of the future and the living conditions could develop. At the same time it is part of our task to explain our work to local people and to the public and to passion skills in methods, instruments and knowledge in planning to the next generation of architects, planners and last but not least to discuss and to renew them once more for ourselves. Our aim was also to reflect what we have done since starting the look through the key-hole of endoscopy. Meanwhile this look has been completed since the beginnings in 1993 much more by computer and monitor. It is not the question to take the endoscope or the computer as a methodical and instrumental approach. Nowadays we normally decide to take the endoscope and the computer. In preparing the conference and the workshop we thought that this should now also be the moment not only to inform each other and the participants on methods, tools and best practices in simulating and designing the environment but also to focus on the social and human consequences of perception, movement and use the present urban spaces and the urban space in future. So we proposed the theme “MOTION, E-MOTION and URBAN SPACE” and we invited a scientific expert in experimental psychology to give us some serious reflections and one or another hint on our research themes and methods. The contributions and discussions in the conference showed that the proposal has not only been accepted but has also been completed and enriched especially concerning the theme urban space, it’s processes of usage and it‘s atmosphere. Also in the themes of endoscopy and the research on modelling urban spaces and architecture, meanwhile nearly “traditional” ones, remarkable results were presented and discussed. A very important point of contributions and the following discussions was how to present our subjects to the interested public and to improve our own internal exchange. An object could be to enforce the research tasks in researching together even more.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	f485
authors	Kolarevic, Branko Radomir
year	1993
title	Geometric Relations as a Framework For Design Conceptualization
source	Harvard University, Graduate School of Design
summary	This study introduces geometric relations as a framework for design conceptualiza-tion-its key premise is that nothing is more fundamental in design than formation and discovery of relationships. The study attempts to establish a formal model for the development of a dynamic computer based graphic environment for design conceptualization that can recognize, record and maintain geometric design relations, merge "depictive" and "propositional", explicit and implicit in design, and provide a qualitatively different way to explore shape, dimension, and geometric organization. The study presents an approach to this task of formalization, and explores some of the fundamental issues pertinent to the subject, such as computability and applicability to the task of designing.Specifically, the study explores a relational description of shapes based on the concept of regulating or construction lines as an explicit formulation of a strategy to form generation and creative discovery, and proposes a lexicon of geometric relations to serve as a basis for composition. It hypothesizes that the construction lines can become much more useful and interesting when they are used not just as a rigid skeleton, but to regulate the behavior of a drawing and to maintain its essential structure as its parts are manipulated. As a consequence, designers could structure the behavior of the object being designed under future transformations; drawings could become seman-tically charged and could be manipulated in a semantically sophisticated fashion.The first chapter places the issue in the broader context by arguing that designers form implicit relational models of their designs. This contention is supported by introducing some of the relevant literature on mental imagery. Second chapter introduces design relations and in particular geometric relations, as a focal point of this study. A dynamic computer -based graphic context for design conceptualization is presented and evalu-ated in the next two chapters and conclusions are drawn. In the third chapter, the model's computability is demonstrated and evaluated through ReDRAW, a limited implementation of a relations based graphic system. In the fourth chapter, the model's applicability in design conceptualization is discussed and supported by examples.
series	thesis:PhD
email
more	http://www.gsd.harvard.edu/academic/asp/ddes/thesis_titles.html
last changed	2003/02/12 22:37

_id	50ce
authors	Baker, R.
year	1993
title	Designing the Future: The Computer Transformation of Reality
source	Thames and Hudson, Hong Kong
summary	A coffee table book on computer applications? Well, yes, because it does deal largely with matters of graphic design in architecture, fashion and textiles, painting, and photography; but it also has items which might be of interest in its sections on digital publication, typography, and electronic communication in general. It also seeks to discuss the way in which these applications may force us to change the way we think. Robin Baker writes in an unfortunately stiff and abstract manner about the impact computer programmes have had on the world of art and design, but the graphic images and extended picture captions help to keep the reader awake - even though the main text sometimes disappears for two or three double page spreads on end. There are also smatterings of pretentious art-world-speak about 'solving certain spatial problems' (in the design of curtain fabrics or teapots) and the introduction (inevitable?) of new jargon: 'shape grammar'(a list of so-called shape 'rules'), 'repurposing' (putting somebody else's work to new use) and 'genetic algorithms' (sculptural designs based on re-processed organic shapes - most of which look like stomach tumours). In his favour, Baker very generously credits students and commercial designers who have produced the effects he describes and illustrates so well. For writers, he sketches in the possibilities of Hypertext and Hypermedia and points to the future of Hyper publishing which he (and Rupert Murdoch)believes will be with us before the end of the century. He seems to have a good oversight of what is possible and practicable - though one wonders how up-to-date the view is when his book may have begun its life anything up to three years ago. He usefully points out that much new technology exists in or drags along with it the forms of earlier periods - so that in an age of electronic communication we still have printed books as a dominant cultural form. Maybe this is as it should be - but Baker makes a persuasive case for the claim that All This is Going to Change.
series	other
last changed	2003/04/23 15:14

_id	e00f
authors	Harfmann, A.C., Majkowski, B. and Chen, S.S.
year	1993
title	A Component-Based Approach to Building Product Representation and Design Development
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 437-452
summary	This paper presents the development of the component-based approach for building product representation and suggests its appropriateness for incorporation at any stage in the design process. The efforts focus on resolving the conflicts that arise when the common denominator of component level representation in utilized throughout the process of designing a building.
keywords	Component-Based Modeling, Component Modeling; Product Models; Building Models, Object-Oriented Modelling, Relational Databases
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	078e
authors	Papazian, Pegor
year	1993
title	Incommensurability of Criteria and Focus in Design Generation
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 111-125
summary	An approach to developing design systems is presented, informed by the recognition that design criteria are incommensurable. The degree to which an artifact satisfies one criterion cannot be compared to the degree to which it satisfies another. Given this principle, it is not valid to combine different "scores " given to independent features in an evolving design into a global evaluation function. The design framework proposed here represents an alternative to the traditional approaches for combining independent criteria and organizational principles. It is based on the opportunistic nature of designing, the multiplicity of semantics active in a design session, and the dynamics of focus and distraction. By way of illustrating both this characterization of designing and the abstract computational framework on which it is based, a simple system for arranging blocks according to a set of formal massing principles is presented. The massing generator has some important properties that other systems lack, such as dynamism, robustness and the ability to deal with partial designs. Through a comparison with some artificial intelligence methods such as production systems and search, the proposed framework is used as a guideline for developing design systems. This paper focuses on designing as an activity, rather than engaging in an analysis of finished designs with the hope of capturing their syntactic properties. Thus the stress is placed on the generator's behavior, by giving examples of how it converges on a series of design alternatives in a dynamic fashion, avoiding oscillations and blocks.
keywords	Design, Criteria, Opportunism, Focus, CAD
series	CAAD Futures
last changed	1999/04/07 12:03

_id	4825
authors	Van Bakel, A.P.M. and Daru, R.
year	1993
title	CAADidactics - An Instrument for Tuning CAAD Systems to Student Styles
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.j4l
summary	This paper discusses the features of an instrument for tuning CAAD systems to student styles implemented in the authoring shell Authorware Professional (1989). This application enables students and teachers to evaluate the design progress. It also makes it possible to assess their preferences with respect to their working styles (Subject style) and style preferences in terms of the product style (Object style) in different stages of the design curriculum. The availability of this information enables teachers to adapt their didactical approach to their students. The progress they make during design education can be evaluated by looking at the process documentation as well as by looking at the product documentation generated by the application. This makes the students conscious of their own preferences and affinities. It is up to the student and the teacher whether they want to enhance or compensate those preoccupations. The documented information of previous design sessions can also be used as a guide system for further development and adaptations in styles of design and designing. In the design studio this style knowledge can also be used to establish adequate and workable design teams. Some of the features discussed in this paper are already implemented in a small prototype application. The prototype application will be presented and discussed. Other features will be implemented in the near future.
series	eCAADe
last changed	2022/06/07 07:50

_id	850a
authors	Wexelblat, A. (Ed.)
year	1993
title	Virtual Reality - Applications and Explorations
source	Academic Press Professional
summary	Virtual and Artificial Reality have become in the last few years one of the major new hype words. Subsequently there has been a plethora of glossy books and droll conference proceedings describing various systems and hardware implementation problems. As has always been discovered in computer science the major effort is in designing and building the software applications. Alan's aim has been to ignore the hardware side and concentrate on the far larger and almost impossible problem of what to do with it. This book is a collection of ten essays trying to look slightly into the future and define actual uses for Virtual Reality kits rather than showing off expensive hardware. This has resulted in a series of topics, each defines a different interface problem between the user and machine which may have some solution by using Virtual Reality. Even though the topics vary, at times drastically, Alan has managed to use editorial selection very well intertwining them into a reasonably coherent whole. The scope is too large for any single book to cover in any detail and as is inevitable important topics for example military and medicine have been excluded. Topics chosen range from traditional computer information database visualisation to planetary exploration to the Virtual Reality version of the music video and literacy in cyberspace.
series	other
last changed	2003/04/23 15:14

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	4dd6
authors	Bhavnani, S.K., Garrett, J. and Shaw, D.S.
year	1993
title	Leading Indicators of CAD Experience
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 313-334
summary	Current interfaces and help facilities of CAD systems are not designed to respond to a user's performance. To develop such adaptive environments, a better understanding of the indicators of CAD experience is required. This paper discusses the results of studying behavior patterns of different types and levels of CAD users for a specific drawing task. The results show that the type and experience of the CAD user has a clear correlation to the pattern of commands used, the time taken, and the quality of drawing produced. By using the experimental data to train a neural network, the paper demonstrates a connectionist approach for experience assessment. This information, it is proposed, can provide input to an adaptive interface which generates unobtrusive interception to improve the performance of a CAD user. Future experiments to explore the issues of generality and interception are presented.
keywords	CAD user Modeling, Adaptive Interface, Neural Networks
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	ddssup9613
id	ddssup9613
authors	Kulkarni, R.G., Stought, R.R. and Haynes, K.E.
year	1996
title	Traffic Flow Landscapes
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Major metropolitan areas and constituent independent jurisdictions face the problem of providing efficient transportation for their residents and in-and out commuters. A typical trip taker spends considerable time on the road to reach the workplace and other destinations. Though it may seem counter-intuitive, adding more links to existing road networks and/or increasing traffic capacity by adding lanes does not necessarily decrease travel times (eg. Braess' paradox). But it is certain that a dense redundant network of roads would provide a trip taker with alternate routes when traffic incidents occur. These types of questions raise the question of, how to evaluate the flow characteristics of the entire road network of a jurisdiction and its larger region in keeping the traffic moving? Further, how may the impact of adding more links/ lanes or the blocking of existing links! lanes be best measured? To answer these and related questions, we propose a methodology to evaluate a fitness criteria for road networks based on Kauffman's biological NK model (1993). We specify a transportation road traffic flow landscape analogous to the fitness landscape of the NK model. Using the transportation road traffic flow landscape we derive a road fitness index that can be used to evaluate either the entire road network's traffic flows or subparts of such network's traffic flows. We explore the possibility of investigating traffic flow landscapes to search for optimal routes to clear traffic. Finally we describe an approach for applying the theoretical framework developed in the paper to the traffic conditions on the road network of the city of Fairfax, Virginia.
keywords	Fitness Landscapes, NK Model, Genotype, Gene, Self-Organization, ITS Technology
series	DDSS
last changed	2003/08/07 16:36

_id	8402
authors	Martens, Bob (Ed.)
year	1995
title	The Future of Endoscopy
source	[Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4] Vienna (Austria), 30 August - 1 September 1995, 144p.
summary	The first EAEA-Conference took place at Tampere University of Technology (Finland, 1993) serving as an meeting point for specialists of endoscopy in architecture and displayed an approach to the potentials of endoscopy. The Vienna Conference in 1995 continued this direction and tried furthermore to serve as a platform for non-advanced users. EAEA '95 Vienna aimed at a critical investigation of today's endoscopic culture. The Aspern-Workshop represented the highlight of this conference. Prior to the conference nine universities had submitted endoscopic and computer-assisted space simulations for this urban expansion area north of the Vienna Danube. The outcome was not to be regarded as a “noble competition” between the various institutions participating, but rather to sound out the actual potential of various simulation techniques and their combinations for future use. The conference proceedings contain the papers presented at the meeting by 23 experts from 15 universities. The papers cover such areas as the technical features of endoscopy and environmental simulation, theories supporting the use of endoscopy, practical applications, and discussions on the future of endoscopy and environmental simulation in comparison with other means of architectural representation.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	2ff9
id	2ff9
authors	Ataman, Osman
year	1993
title	Knowledge-based Stair Design
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 163-171
doi	https://doi.org/10.52842/conf.acadia.1993.163
summary	The application of computer--based technique to support architectural design has often concentrated on matters of representation. Typically, this means computer-aided drafting, and less frequently, computer-aided modeling and visualization. The promise of new computer-based tools to support the process of design has thus far failed to produce any significant tool that has had a widespread impact on the architectural profession. Most developments remain in university based research labs where they are used as teaching instruments in CAD courses or less often in design studios. While there are many reasons for this lack of dissemination, including a reluctance on the part of the architectural profession itself, the primary obstacles deal with difficulties in explicating design knowledge, representing this knowledge in a manner that can be used for design, and providing an intuitive and effective user interface, allowing the designer to easily use the tool for its intended purpose. This study describes a system that has been developed to address a number of these issues. Based on research findings from the field of Artificial Intelligence which expounds on the need for multiple techniques to represent any complex area of knowledge, we have selected a particular approach that focuses on multiple techniques for design representation. We review this approach in depth by considering its many facets necessary when implementing a knowledge-based system. We then partially test the viability of this approach through a small case study, implementing a knowledge-based system for designing stairs. While this effort only deals with a small part of the total design process, it does explore a number of significant issues facing the development of computer-based design assistants, and suggests several techniques for addressing these concerns.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	a336
authors	Calvo, Charles M.
year	1993
title	SOME EPISTEMOLOGICAL CONCERNS REGARDING ARTIFICIAL INTELLIGENCE AND KNOWLEDGE-BASED APPROACHES TO ARCHITECTURAL DESIGN - A RENEWED AGENDA
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 155-162
doi	https://doi.org/10.52842/conf.acadia.1993.155
summary	It has been noted that designers - when confronted with computers - have, by and large, refused to accept the introduction of apparently new design methodologies, and it has been speculated that this is the result of a failure of those methodologies to address the cognitive processes which take place in the course of designing. This position is somewhat suspect in that such innovations as computer-aided drafting -which also fail to recognize these processes have been widely accepted. It is perhaps more likely that the lack of acceptance results from a perception on the part of designers that the new methodologies either do not reflect some or all of those concerns that designers consider fundamental to design, or that they actively interfere with the designer's ability to accomplish what he/she sees as the goals of design. Given that the application of artificial intelligence and related work to architecture is still in its infancy, all of this suggests the need for a reassessment of the role of computing in design in order to clarify and strengthen those roles deemed appropriate. Two approaches to the integration of artificial intelligence and knowledge-based systems into architectural design practice are currently dominant. One attempts to create systems which can on their own produce designs, the other provides intelligent support for those doing design. It was, in part, the recognition of limitations in the ability of traditional CAD systems and building modelers to reflect what designers actually do that led to explorations into the idea of intelligent assistants. Development of such assistants was aided by research into the act and process of design through protocol and other studies. Although some work is currently being done in the development of artificial intelligence and knowledge based applications in architecture, and work continues to be done on the study of design methodologies, the bulk of available information in each of these areas remains in the realm of design disciplines related to but outside of architecture and do not reflect the explicit role of architectural design in the embodiment and expression of culture. The relationship of intelligence to culture has resulted in some skepticism regarding the ultimate capacity of neural nets and symbolically programmed computers in general. Significant work has been done questioning the rational tradition in computer development for its failure to address phenomena which are not easily subject to scientific analysis. Further skepticism regarding the role of artificial intelligence and knowledge-based or expert systems in architectural design has been emerging recently. Such criticism tends to focus on two issues: the nature of drawing as an activity which involves both the generation and interpretation of graphic artifacts, and the nature of the human designer as an active agent in the design process.
series	ACADIA
type	normal paper
last changed	2022/06/07 07:54

_id	ecaade2022_368
id	ecaade2022_368
authors	Das, Avishek, Brunsgaard, Camilla and Madsen, Claus Brondgaard
year	2022
title	Understanding the AR-VR Based Architectural Design Workflow among Selected Danish Architecture Practices
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 381–388
doi	https://doi.org/10.52842/conf.ecaade.2022.1.381
summary	Virtual reality (VR) and augmented reality (AR) have been proposed to be additional architectural design mediums for at least 25 years (Dagit, 1993). Despite rapid technical and technological development, it has not been adopted into architectural design practices as compared to academia and research. Surveys from the American Institute of Architects (AIA) and Royal Institutes of British Architects (RIBA) demonstrate the state of architectural practices; 72% of architects and 65% of architects respectively are not using any kind of virtual, augmented, or mixed reality in their practices(RIBA and Microsoft, 2018; Hampson, 2020). In this paper, the authors investigate the state of practices, issues, challenges, and opportunities of the utilization of virtual, augmented, and mixed realities in six architectural practices in the Danish context. Three of the practices are large architectural practices, one medium-sized practice specializing in institutional, healthcare and cultural architecture, and one firm designing private family houses, kindergartens, daycares and places for people with disability and, one experimental design studio. All these practices have used VR/AR in their projects to various degrees. In recent years Danish architectural practices have been involved in various VR/AR-based exhibitions, demonstrations, and tool developments to promote the usage of the same in design practice. Through a set of qualitative interviews with personnel from key architectural practices, the authors would like to demonstrate the present state of practices. The investigation explores the usage of VR and AR in Danish architecture practices by identifying challenges and opportunities regarding skill levels, architectural typology, use cases, toolchains, and workflow and shows similarities and differences between traditional and VR-based design processes. The main findings show how VR/AR-based visualization helps architects to perceive spatiality and also ushers creativity through immersion and overlays.
keywords	Virtual Reality, Augmented Reality, Architectural Design Practice, Denmark
series	eCAADe
email
last changed	2024/04/22 07:10

_id	bdc5
authors	Lehane, A., Wright, D. and Lambourne, E.
year	1993
title	Parallel Modeling: Addressing the Issues of Creative Designing in CAD Environments II. Special Applications
source	Proceedings of the Fifth International Conference on Human-Computer Interaction 1993 v.1 pp. 249-254
summary	We postulate that Industrial Designers, in general, solve a given problem by generating a series of proposed solutions to that problem, each proposal, in theory, helps the designer to converge on the ideal solution. Any number of solutions may be under continuous development at any one time and any previous solutions should always be available for appraisal and viewing. The single modeling environment provided in traditional Computer Aided Design (CAD) systems does not support this practice. Thus, CAD systems are primarily used to address the final phases of the design process, such as analysis, visualisation and detailing. This is surely not utilising the full potential of such a powerful design tool. In an attempt to develop a less restrictive working practice for CAD users, we consider a parallel modeling approach. This solution allows the simultaneous development, design and review of a number of computer based solutions.
keywords	Paper Based Design Process; Parallel Modeling; Computer Based Design Process; Sets; Industrial Design; Set Theory; Directed Acyclic Graph; Seed
series	other
last changed	2002/07/07 16:01

_id	6499
authors	Lintl, C., Economides, D., Hesse, M., Langenbahn, V., Roth, S. and Brack, C.
year	1993
title	CAD Education at Munich
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.t7f
summary	We are stressing the idea that a combination of learning CAD and developing a design- work will hardly lead to success. It is first important to learn the principle handling of CAD - only then a reasonable application can work out. Our pupils have the chance of comparing, Iearning and working on several different CAD-systems with different philosophies and purposes, so the interested students have the opportunity to choose a tool that fits their working-habits and their designing-methods. Out of an overall number of 200 students of architecture each semester about 150 are willing to participate in the CAD- curriculum. 100 will be left after the low-level introductions and exercises, done with the standard: AutoCAD - these students than have a basic idea of construction with computers. Those students who are going into details are deepening there skills to an extent where any experiment is feasible. It is hard work to get to this perfection.
series	eCAADe
last changed	2022/06/07 07:50

_id	2789
authors	Mallard, Maria L. and Ng, Edward
year	1993
title	Active Studio Version 1.0
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.o8u
summary	In the evening reception held at the Mies Van der Rohe's German Pavilion, Gabriel Ferrater, Rector of Universitat Politecnica de Catalunya, challenged the participants of the ECAADE 92 conference that despite all the advances in CAD techniques, none of the many wonderful buildings that had been built in Barcelona was 'designed' on computer. To researchers in the field of design and CAD research, the challenge went deeper than designing and architecture. It questions the very essence of CAD methodology and pedagogy.
series	eCAADe
last changed	2022/06/07 07:50

_id	c995
authors	Smets, G., Gaver, W.W., Overbeeke, C. and Stappers, P.
year	1993
title	Designing in Virtual Reality: Perception-Action Coupling and Form Semantics Short Papers (Talks): Visual Languages and Virtual Reality
source	Proceedings of ACM INTERCHI'93 Conference on Human Factors in Computing Systems -- Adjunct Proceedings 1993 pp. 11-12
summary	In this paper, we describe work on a CAD package we are developing for use in virtual reality. Although this research is only preliminary, it demonstrates some advantages of designing in virtual reality. We describe these advantages in terms of ecological approach to perception, focusing on two of the implications of this approach: the role of perception-action coupling in producing true direct manipulation, and the desirability of providing perceptual information about the affordances of objects in the design environment.
keywords	Virtual Reality; Ecological Approaches
series	other
last changed	2002/07/07 16:01

_id	c38c
authors	Wrona, S., Kowal, S. and Rzadkiewicz, R.
year	1993
title	The Basic Principles of CAAD Education: Warsaw School of Architecture Case
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.e2u
summary	Department of Architecture at Warsaw University of Technology is 78 years old. Its long tradition was built mainly around functionalists movements in architecture and till now has meaningful influence on approaches and methods in design teaching. Till now, the basic method of design teaching is individual work in small master's design classes in which students are designing by hand drawing, drafting and building models, which are in the same time creative methods ("designing by drawing or modelling") and communication media (mainly to communicate with the master or its assistant). Students are learning from the knowledge and design experience of a master, often following or imitating his workshop and aesthetic concepts. This traditional method was expensive but efficient in preparation of architects to their professional activities. Therefore, when we started with CAAD classes in mid 80-ties, the "design learning by computer modelling" was the basic issue.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	855d
authors	Alavalkama, I., Aura, S. and Palmqvist H. (Eds.)
year	1993
title	Endoscopy as a Tool in Architecture
source	Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3 / Tampere (Finland), 25-28 August 1993, 196 p.
summary	The European Architectural Endoscopy Association was established in connection with the Association’s first international conference on August 25-28, 1993, which was hosted by the Department of Architecture at the Tampere University of Technology. The purpose of the EAEA is to promote experimentation, research, communication, exchange of experiences, collaboration, user participation and teaching in the field of endoscopy and environmental simulation. The first EAEA conference was attended by 25 people from 15 different universities. Working under the general heading of “Endoscopy as a Tool in Architecture”, the conference had three specific themes for the first three days: Review of Existing Laboratories; Theories, Methods and Applications; and the Future of Endoscopy. In this volume we have compiled all the papers that were presented at the conference. The texts have been printed in the form we received them, without any attempt to edit them for consistency in style, adding hopefully to a sense of authenticity. Unfortunately, the impressive videos we saw at the conference on the possibilities of endoscopy and environmental simulation as a tool in architecture, cannot be documented here.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

For more results click below: