Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 241

Reformat results as: short short into frame detailed detailed into frame

_id	cd6f
authors	Gero, John S. and Yani, Min
year	1993
title	Discovering Emergent Shapes Using a Data-Driven Symbolic Model
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 3-17
summary	This paper presents a model for discovering emergent shapes based on the concept of shape hiding and data-driven search. It is founded on representing polyline bounded shapes using infinite maximal lines, an extension of the concept of maximal lines. A process model of shape emergence is presented and a number of examples given which demonstrate the utility of both the representation and the model.
keywords	Shape, Emergence, Symbolic Model, Data-Driven Search
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	4a5f
authors	Liu, Yu-Tung
year	1993
title	Recognizing Emergent Subshapes in Design Problem Solving: A Connectionist Investigation
doi	https://doi.org/10.52842/conf.acadia.1993.131
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 131-139
summary	Human problem-solving behavior has been modelled as a search through the space as defined as problem states, within which earlier states move to subsequent ones by applying rules in the human mind until the goal state is found. This cognitive model of problem-solving has been broadly accepted and has become dominant in both cognitive psychology and artificial intelligence (AI). In the field of computeraided architectural design (CAAD), search models are also widely used for solving design problems, although various foci of design knowledge are differently represented by shape grammars, graphs, and knowledge-based systems using predicate logic for different purports. In design search, design evolves from one state to another by exhaustively or heuristically applying proper rules. Each rule application involves, first, pattern-matching the antecedent of a rule to the current state and, second, transforming the matched portion of that state into the consequence of the rule. However pattern-matching techniques of current CAAD systems are still limited. In current CAAD systems, only those two squares can be dealt with by patternmatching for further development. However, a human designer can effortlessly recognize not only those two but other emergent subshapes, for example a smaller square in the middle where the two squares overlap and two L-shapes in the corners. Therefore a human designer can thoroughly deliberate all these alternatives before making a decision. In other words, human designer is capable of restructuring shapes in terms of emergent subshapes in any step of designing.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	f485
authors	Kolarevic, Branko Radomir
year	1993
title	Geometric Relations as a Framework For Design Conceptualization
source	Harvard University, Graduate School of Design
summary	This study introduces geometric relations as a framework for design conceptualiza-tion-its key premise is that nothing is more fundamental in design than formation and discovery of relationships. The study attempts to establish a formal model for the development of a dynamic computer based graphic environment for design conceptualization that can recognize, record and maintain geometric design relations, merge "depictive" and "propositional", explicit and implicit in design, and provide a qualitatively different way to explore shape, dimension, and geometric organization. The study presents an approach to this task of formalization, and explores some of the fundamental issues pertinent to the subject, such as computability and applicability to the task of designing.Specifically, the study explores a relational description of shapes based on the concept of regulating or construction lines as an explicit formulation of a strategy to form generation and creative discovery, and proposes a lexicon of geometric relations to serve as a basis for composition. It hypothesizes that the construction lines can become much more useful and interesting when they are used not just as a rigid skeleton, but to regulate the behavior of a drawing and to maintain its essential structure as its parts are manipulated. As a consequence, designers could structure the behavior of the object being designed under future transformations; drawings could become seman-tically charged and could be manipulated in a semantically sophisticated fashion.The first chapter places the issue in the broader context by arguing that designers form implicit relational models of their designs. This contention is supported by introducing some of the relevant literature on mental imagery. Second chapter introduces design relations and in particular geometric relations, as a focal point of this study. A dynamic computer -based graphic context for design conceptualization is presented and evalu-ated in the next two chapters and conclusions are drawn. In the third chapter, the model's computability is demonstrated and evaluated through ReDRAW, a limited implementation of a relations based graphic system. In the fourth chapter, the model's applicability in design conceptualization is discussed and supported by examples.
series	thesis:PhD
email
more	http://www.gsd.harvard.edu/academic/asp/ddes/thesis_titles.html
last changed	2003/02/12 22:37

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	86dc
authors	Aouad, G., and Price, A.D.F.
year	1993
title	An integrated system to aid the planning of concrete structures: introducing the system
source	The Int. Journal of Construction IT1(2), pp.1-14
summary	This paper reports on the development at Loughborough University of a CAD-based integrated model to aid the planning of in-situ concrete structures. The system development started after a review of the planning models currently available and after a detailed questionnaire survey undertaken amongst the top UK and US contractors on the current status of planning techniques and information technology. The main aim of this system is to automate the planning process of in-situ concrete structures using data generated by CAD systems. So far, the integration of a CAD system (AutoCAD 10) and a computerized scheduling system (Artemis 2000) has been achieved on a typical IBM-PC. This enables the generation of network plans using AutoCAD which are then automatically transferred to the Artemis system for time and cost analyses.Traditionally, construction planners are faced with many conventional drawings and documents which are used to re-extract information relevant to their planning processes. Such an approach can be very inefficient as it involves data double-handling and is often error prone. In addition, current computerized construction planning applications are little more than the automation of manual formulations of plans. For example, data are fed into the planning system and computations are performed using either CPM (Critical Path Method) or PERT (Programme Evaluation and Review Technique). However, data relating to the planning process such as activity lists, resources requirements and durations are not automatically generated within the system. It would thus seem logical to devise a CAD-based integrated planning model which accepts data in its electronic format and involves some integration of the traditional planning approach. This paper introduces the proposed CAD-based integrated planning model and describes its different components. In addition, it discusses the system functional specifications and summarizes the main benefits and limitations of such a model.
series	journal paper
last changed	2003/05/15 21:45

_id	0c88
authors	Bedell, John R. and Kohler, Niklaus
year	1993
title	A Hierarchical Model for Building Applications
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 423-435
summary	Advanced computer-aided architectural applications must model buildings as multi-level compositions supporting distinct points of view. Hierarchies of encapsulated, autonomous elements can be derived from ISO-STEP's General AEC Reference Model and configured for various applications. For analysis of life-cycle costs, we define a Pyramid of evaluable production steps leading to the final building; for optimization of renovation task schedules, a topological model of access paths and traffic flow. These separate viewpoints can be embedded in a single unifying structure permitting the communication and propagation of changes among its specialized aspects.
keywords	Design Model, Decision Support System, Object-Oriented Data Model, Building Product Model, STEP-GARM
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	ddss9209
id	ddss9209
authors	De Gelder, J.T. and Lucardie, G.L.
year	1993
title	Knowledge and data modelling in cad/cam applications
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Modelling knowledge and data in CAD/CAM applications is complex because different goals and contexts have to be taken into account. This complexity makes particular demands upon representation formalisms. Today many modelling tools are based on record structures. By analyzing the requirements for a product model of a portal structure in steel, this paper shows that in many situations record structures are not well suited as a representation formalism for storing knowledge and data in CAD/CAM applications. This is illustrated by performing a knowledge-level analysis of the knowledge and data generated in the design and manufacturing process of a portal structure in steel.
series	DDSS
last changed	2003/08/07 16:36

_id	4203
authors	Fraser, Michael
year	1993
title	Boundary Representation in Practice
doi	https://doi.org/10.52842/conf.acadia.1993.173
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 173-185
summary	There is an essential contradiction between the making of buildings or built environments in a threedimensional modeler and the graphic control of this process. Three-dimensional modeling is a constructive activity, in which solids are assembled as they would be in an actual structure; it benefits the designer. Presentation and documentation, on the other hand, are prescriptive activities that direct some of the construction and all the visualization and criticism of the proposal; they benefit the user and builder. A building while being designed can be visualized and criticized from its solid model, and the model can take a variety of forms depending on its part): computer-based, drawn in orthographic or perspective projection, constructed of cardboard or wood, or described narratively by means of text, programmatic data, performance model or animation. However, practicing architecture is the process of recording and communicating the decision making process and the contractual obligations that result. In actual practice, in contrast to the designer directed ideal, more participants are brought in sooner at the beginning of a project and with more publicity, which in turn means keeping more, not fewer, records. As the profession evolves, records of the string of design decisions will become more automated, more carefully structured and more retrievable. More buildings will be "tracked" and exposed to review in this way because public environmental sensitivity will improve. The communication between a single designer and his own thoughts will become less and less important.
series	ACADIA
last changed	2022/06/07 07:50

_id	ca14
authors	Gavin, Lesley
year	1993
title	Generative Modelling and Electronic Lego
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q8a
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	This paper shows work exemplifying the further extent of computer capabilities in the field of design. The work stems from a belief that for computers to be used effectively within the architectural profession their utility must stretch far beyond the process of description of geometric data, but be incorporated in the fundamental roots of design: that of conceptual design. Computers can be used to access the knowledge we have and then formulate this knowledge into a working language of design. Computers can be used to generate space and form in accordance with any relationship the designer may choose to set. This allows them to be used from the very conception of design. It is only by working from the very beginning, the very basis of the design of a building that we can fully develop the integration of computers in the construction industry. The work undertaken sets out primarily to explore one of the ways computers could be used in the field of architectural design. In recognition that an important byproduct of any design search is the enhanced understanding of the problem itself, the work was directed towards a particular project. This allowed each stage of thought to be to be considered as it arose and subsequently incorporated into the design model. The work does not attempt to automise the design process but simply tries to explore some of the opportunities offered by computers and see if they can be easily incorporated into the design process offering design solutions that may not otherwise have been considered. The exploration resulted in a simple design process model that incorporates the more accessible and useful aspects of computer technology.
keywords	Generative Modelling, Rule Based Form, Random Factors, Shape Grammars
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddss9211
id	ddss9211
authors	Gilleard, J. and Olatidoye, O.
year	1993
title	Graphical interfacing to a conceptual model for estimating the cost of residential construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper presents a method for determining elemental square foot costs and cost significance for residential construction. Using AutoCAD's icon menu and dialogue box' facilities, a non-expert may graphically select (i) residential configuration; (ii) construction quality level; (iii) geographical location; (iv) square foot area; and finally, (v) add-ons, e.g. porches and decks, basement, heating and cooling equipment, garages and carports etc. in order to determine on-site builder's costs. Subsequent AutoLisp routines facilitate data transfer to a Lotus 1-2-3 spreadsheet where an elemental cost breakdown for the project may be determined. Finally, using Lotus 1-2-3 macros, computed data is transferred back to AutoCAD, where all cost significant items are graphically highlighted.
series	DDSS
last changed	2003/08/07 16:36

_id	c05c
authors	Hovestadt, Ludger
year	1993
title	A4 Digital Building: Extensive Computer Support for Building Design, Construction, and Management
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 405-421
summary	The integrated design, construction, and management of buildings are described as being of unlimited complexity. The data structures required to support these tasks cannot be predefined and have- to be worked out during the design process. An instrument that integrates weakly and strongly structured data is necessary. A4 proposes - as a minimal structuring mechanism - the position of information in a dataspace. It offers diverse additional and optional structuring mechanisms. Examples from different domains show the particular strengths of the A4 integration model.
keywords	Architecture, Intelligent Building, CAD, Multi-Media, Hypermedia, Active Objects, Virtual Reality, Multi-User, Expert System, Case-Based Reasoning, Communication, Data-Mining
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	855a
authors	Liew, B.K., Mathur, K., Tan, C.L., Tham, H.C., Teh, H.C., Loe, K.F., Heah, K.L.
year	1993
title	PARADISE: An Intelligent CAD System architecture
source	The Int. Journal of Construction IT 1(3), pp.1-24
summary	This paper presents the architecture of an intelligent CAD system called PARADISE. The motivation is in addressing the lack in architectural computing that has to do with intelligent assistance of design at the early stages. A schema for representing and integrating design knowledge and graphical data called the Design Model (DM) is presented. Following which, work done in developing the CAD-based front end of PARADISE called the graphic subsystem (PGS) is described. The emphasis is at providing tools which facilitate the creation and manipulation of form and spaces at early design stages. We then describe the functionalities of our geometric reasoner (PGS) is described. The geometric reasoner is responsible for all reasoning between the syntax of design drawings and its related semantics. We highlight, in particular, the reasoning of implicit spaces.
series	journal paper
last changed	2003/05/15 21:45

_id	5fdc
authors	Reber, A.S.
year	1993
title	Implicit Learning and Tacit Knowledge: An Essay on the Cognitive Unconscious
source	New York: Oxford University Press
summary	In this new volume in the Oxford Psychology Series, the author presents a highly readable account of the cognitive unconscious, focusing in particular on the problem of implicit learning. Implicit learning is defined as the acquisition of knowledge that takes place independently of the conscious attempts to learn and largely in the absence of explicit knowledge about what was acquired. One of the core assumptions of this argument is that implicit learning is a fundamental, "root" process, one that lies at the very heart of the adaptive behavioral repertoire of every complex organism. The author's goals are to outline the essential features of implicit learning that have emerged from the many studies that have been carried out in a variety of experimental laboratories over the past several decades; to present the various alternative perspectives on this issue that have been proposed by other researchers and to try to accommodate these views with his own; to structure the literature so that it can be seen in the context of standard heuristics of evolutionary biology; to present the material within a functionalist approach and to try to show why the experimental data should be seen as entailing particular epistemological perspectives; and to present implicit processing as encompassing a general and ubiquitous set of operations that have wide currency and several possible applications. Chapter 1 begins with the core problem under consideration in this book, a characterization of "implicit learning" as it has come to be used in the literature. Reber puts this seemingly specialized topic into a general framework and suggests a theoretical model based on standard heuristics of evolutionary biology. In his account, Reber weaves a capsule history of interest in and work on the cognitive unconscious. Chapter 2 turns to a detailed overview of the experimental work on the acquisition of implicit knowledge, which currently is of great interest. Chapter 3 develops the evolutionary model within which one can see learning and cognition as richly intertwining issues and not as two distinct fields with one dominating the other. Finally, Chapter 4 explores a variety of entailments and speculations concerning implicit cognitive processes and their general role in the larger scope of human performance
series	other
last changed	2003/04/23 15:14

_id	e4c3
authors	Saggio, Antonino
year	1993
title	Hypertext, Solid Modeling, and Hierarchical Structures in Formal Architectural Analysis
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 289-309
summary	The paper presents computer reconstructions of unbuilt projects relevant to the history of Italian rationalism together with the potential and limits of three CAAD environments. While an evaluation is provided for each one, a more detailed attention is devoted to hierarchical structures because of their capability to capture knowledge, to support further investigations, and to provide new insights into architecture. A model built in this environment allows simultaneously (1) the analysis and reconstruction even of a complex project at the size of a personal computer; (2) the simulation and test of different material, crucial in the case of restoration or in the case of incomplete and uncertain original project data; (3) the critical analysis (but also the co-presence of the different project alternatives of design phases) through the reading at the various level of the hierarchy; and (4) free investigation on the structure of data that can support new critical hypothesis and insights that were not anticipated at the moment of project creation.
keywords	Hypertext, Solid Modeling, Hierarchical Structures, Giuseppe Terragni, Italian Modern Architecture
series	CAAD Futures
last changed	1999/04/07 12:03

_id	0f50
authors	Skauge, Jørn
year	1993
title	An Electronic Tool for Urban Design Analysis
doi	https://doi.org/10.52842/conf.acadia.1993.077
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 77-85
summary	Architects and urban designers are increasingly using computers in their attempt to improve decision making in urban design. Most existing systems emphasize hard data such as statistics, land use data, etc. In recent years with the use of more powerful computers we have seen a greater emphasis on managing visual data. Computer systems are being used to generate urban models and simulations of the various kinds of impact new developments have on the existing cityscape. This project emphasizes the use of visual data. The purpose of the research has been to develop a computer system for urban designers to use in analyzing urban architectural qualities. Therefore this project focuses on applying traditional methods and theories of urban designers rather than developing new computer techniques. The traditional methods and theories of urban designers fall within the category which the French theorist Francoise Choay calls Pre-urbanism and Urbanism - the Cultural Model. Theorists within this category include Camillo Sitte, Gordon Cullen, Kevin Lynch, Leon Krier, Aldo Rossi, Michael Trieb, Roger Tranzick and Thiis-Evensen. This computer system has been developed as a prototype in order to gain experience and knowledge for future development of a large system. Later development will be based upon a vectorized threedimensional model of a whole city using texture mapping and tracing techniques to annotate important architectural features. The computer system consists of the basic analysis module supplied with a simulation unit and a theory unit. With this analytical tool, analysis is conducted on three different urban scales. The prototype has been developed on the Macintosh computer with SuperCard as the authoring tool. The computer system was developed as a prototype for Danish Urban Designers and is currently being tested in conjunction with the city of Viborg, Denmark. ( population 55,000). Located in Jutland, Viborg was the capital of Denmark around the year 1000. It now functions as a center for regional government. Viborg was selected as the test site because of its historical core.
series	ACADIA
last changed	2022/06/07 07:56

_id	ddss9203
id	ddss9203
authors	Smeets, J.
year	1993
title	Housing tenancy, data management and quality control
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper deals with housing tenancy, data management and quality control. The proposed method is focused on quality characteristics of housing estates in view of rentability risks. It entails a cycle of registration, analysis and implementation of measures. The starting point is the behaviour of the housing consumer in a market-oriented context. The model is framed within theories of strategic management and marketing. Systematic registration and evaluation of consumer behaviour, by means of a set of relevant process and product indicators, can yield relevant information in the four phases of the rental process: orientation, intake, dwelling and exit. This information concerns the way in which the dwelling (characterized by product indicators) fits the needs of the consumer. The systematic analysis of the process and product indicators during the phases of the rental process makes a 'strength-weakness analysis' of housing estates possible. The indicators can be presented in aggregated form by way of a 'rentability index. The 'strength-weakness analysis' steers the intervention in the quality characteristics of housing estates. The possibilities for readjustment, however, are different. The quality control system is not only an early warning system, but also has several other functions: evaluation, planning and communication. The method described here lays a solid foundation for a decision-support system in the area of housing tenancy.
series	DDSS
last changed	2003/08/07 16:36

_id	2c7b
authors	Stenvert, Ronald
year	1993
title	The Vector-drawing as a Means to Unravel Architectural Communication in the Past
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q9a
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Unlike in painting, in architecture one single person never controls the whole process between conception and realization of a building. Ideas of what the building will eventually look like, have to be conveyed from patron to the actual builders, by way of drawings. Generally the architect is the key-figure in this process of communication of visual ideas. Nowadays many architects design their new buildings by using computers and Computer-Aided (Architectural) Design programs like AutoCad and VersaCAD. Just like traditional drawings, all these computer drawings are in fact vector-drawings; a collection of geometrical primitives like lines, circle segments etc. identified by the coordinates of their end points. Vector-based computer programs can not only be used to design the future, but also as a means to unravel the architectural communication in the past. However, using the computer as an analyzing tool for a better comprehension of the past is not as simple as it seems. Historical data from the past are governed by unique features of date and place. The complexity of the past combined with the straightforwardness of the computer requires a pragmatic and basic approach in which the computer acts as a catalytic agent, enabling the scholar to arrive manually at his own - computer-assisted - conclusions. From this it turns out that only a limited number of projects of a morphological kind are suited to contribute to new knowledge, acquired by the close-reading of the information gained by way of meaningful abstraction. An important problem in this respect is how to obtain the right kind of architectural information. All four major elements of the building process - architect, design, drawing and realization - have their own different and gradually shifting interpretations in the past. This goes especially for the run-of-the-mill architecture which makes up the larger part of the historical urban environment. Starting with the architect, one has to realize that only a very limited part of mainstream architecture was designed by architects. In almost all other cases the role of the patron and the actual builder exceeds that of the architect, even to the extent that they designed buildings themselves. The position of design and drawing as means of communication also changed in the past. Until the middle of the nineteenth century drawings were not the chief means of communication between architects and builders, who got the gist of the design from a model, or, encountering problems, simply asked the architect or supervisor. From the nineteenth century onwards the use of drawings became more common, but almost never represented the building entirely "as built". In 1991 I published my Ph.D. thesis: Constructing the past: computerassisted architectural-historical research: the application of image-processing using the computer and Computer-Aided Design for the study of the urban environment, illustrated by the use of treatises in seventeenth-century architecture (Utrecht 1991). Here, a reconstruction of this historical communication process will be presented on the basis of a project studying the use of the Classical orders as prescribed in various architectural treatises, compared to the use of the orders in a specific group of still existing buildings in The Netherlands dating from the late sixteenth and entire seventeenth century. Comparisons were made by using vector-drawings. Both the illustrations in the the treatises and actual buildings were "translated" into computer-drawings and then analyzed.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9201
id	ddss9201
authors	Van Bakel, A.P.M.
year	1993
title	Personality assessment in regard to design strategies
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper discusses some preliminary results of several knowledge-acquisition and documentation-structuring techniques that were used to assess the working styles of architects. The focus of this assessment was on their strategic design behaviour. Hettema's Interactive Personality Model (Hettema 1979, 1989) was used to explain and interpret these results. The methods used to acquire the necessary data are protocol analysis, card sorting and interviews. The results suggest that at least three parameters can be used to explain and differentiate the strategic design behaviour of architects. These parameters are S (site-oriented), B (brief-oriented) and C (concept-oriented). A priority hierarchy of these parameters reveals six major distinguishable working styles. These results are captured in a new design model that can be used in data bank implementations.
series	DDSS
last changed	2003/08/07 16:36

_id	291d
id	291d
authors	Van Bakergem, Davis W. and Obata, Gen
year	1993
title	MAKING THE PROBLEM VISIBLE: PROJECT SPECIFIC INFORMATION IN COLLABORATIVE DESIGN
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 471-480
summary	This paper describes our current work in the development of an interactive, collaborative design space. It attempts to anticipate a future in which complex design Problems are undertaken by an interdisciplinary, collaborative group of contributors working within an electronic, networked environment. These networked working groups are made possible by the expanded use of high-speed digital networks and are expected to continue to grow within the design profession Using the design of an academic building as a case study, several new tools and techniques were used to develop an information place superimposed over the three-dimensional digital model of the site and proposed building. These tools allow the user to create a collection of data including site documentation and analysis; propose interventions; and access the data through three-dimensional icons in the modeL Several new techniques related to collecting and accessing information within the collaborative space are discussed.
keywords	Collaboration, Hypermedia, Information Visualizer, Virtual Workspace, Image Collections
series	CAAD Futures
type	normal paper
last changed	2004/04/10 06:43

For more results click below: