Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 92

Reformat results as: short short into frame detailed detailed into frame

_id	e9f1
authors	Alaimo, G., Pellitteri, G. and Scianna, A.
year	1993
title	A Tool for Typological Analysis
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q0g
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Any design problem is faced drawing from the architect's knowledge both case knowledge and general knowledge. One type of the latter is abstracted from a multiplicity of cases of which the common features are recognised in such a way as to single out a prototype representing in the best way a class of architectural objects. If applied to a set of residential buildings and to the flats in them the analysis is typological and it is one of the fundamental ways of acquiring general knowledge to be used to face design problems. The tool we present is aimed at such a type of analysis and is based on the idea that it possible to acquire qualitative knowledge through the statistical analysis of measurable characteristics of the examined architectural objects. It has been tested by applying it to the typological analysis of a set of flats of illegal buildings in Sicily. The procedure is organised in two main phases. The first one consists in a series of elaborations performed during the reading of architectural organism; the second one consists in a series of statistical analyses on the results (characteristic variables) of the first.
series	eCAADe
last changed	2022/06/07 07:50

_id	855d
authors	Alavalkama, I., Aura, S. and Palmqvist H. (Eds.)
year	1993
title	Endoscopy as a Tool in Architecture
source	Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3 / Tampere (Finland), 25-28 August 1993, 196 p.
summary	The European Architectural Endoscopy Association was established in connection with the Association’s first international conference on August 25-28, 1993, which was hosted by the Department of Architecture at the Tampere University of Technology. The purpose of the EAEA is to promote experimentation, research, communication, exchange of experiences, collaboration, user participation and teaching in the field of endoscopy and environmental simulation. The first EAEA conference was attended by 25 people from 15 different universities. Working under the general heading of “Endoscopy as a Tool in Architecture”, the conference had three specific themes for the first three days: Review of Existing Laboratories; Theories, Methods and Applications; and the Future of Endoscopy. In this volume we have compiled all the papers that were presented at the conference. The texts have been printed in the form we received them, without any attempt to edit them for consistency in style, adding hopefully to a sense of authenticity. Unfortunately, the impressive videos we saw at the conference on the possibilities of endoscopy and environmental simulation as a tool in architecture, cannot be documented here.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	50ce
authors	Baker, R.
year	1993
title	Designing the Future: The Computer Transformation of Reality
source	Thames and Hudson, Hong Kong
summary	A coffee table book on computer applications? Well, yes, because it does deal largely with matters of graphic design in architecture, fashion and textiles, painting, and photography; but it also has items which might be of interest in its sections on digital publication, typography, and electronic communication in general. It also seeks to discuss the way in which these applications may force us to change the way we think. Robin Baker writes in an unfortunately stiff and abstract manner about the impact computer programmes have had on the world of art and design, but the graphic images and extended picture captions help to keep the reader awake - even though the main text sometimes disappears for two or three double page spreads on end. There are also smatterings of pretentious art-world-speak about 'solving certain spatial problems' (in the design of curtain fabrics or teapots) and the introduction (inevitable?) of new jargon: 'shape grammar'(a list of so-called shape 'rules'), 'repurposing' (putting somebody else's work to new use) and 'genetic algorithms' (sculptural designs based on re-processed organic shapes - most of which look like stomach tumours). In his favour, Baker very generously credits students and commercial designers who have produced the effects he describes and illustrates so well. For writers, he sketches in the possibilities of Hypertext and Hypermedia and points to the future of Hyper publishing which he (and Rupert Murdoch)believes will be with us before the end of the century. He seems to have a good oversight of what is possible and practicable - though one wonders how up-to-date the view is when his book may have begun its life anything up to three years ago. He usefully points out that much new technology exists in or drags along with it the forms of earlier periods - so that in an age of electronic communication we still have printed books as a dominant cultural form. Maybe this is as it should be - but Baker makes a persuasive case for the claim that All This is Going to Change.
series	other
last changed	2003/04/23 15:14

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	0c88
authors	Bedell, John R. and Kohler, Niklaus
year	1993
title	A Hierarchical Model for Building Applications
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 423-435
summary	Advanced computer-aided architectural applications must model buildings as multi-level compositions supporting distinct points of view. Hierarchies of encapsulated, autonomous elements can be derived from ISO-STEP's General AEC Reference Model and configured for various applications. For analysis of life-cycle costs, we define a Pyramid of evaluable production steps leading to the final building; for optimization of renovation task schedules, a topological model of access paths and traffic flow. These separate viewpoints can be embedded in a single unifying structure permitting the communication and propagation of changes among its specialized aspects.
keywords	Design Model, Decision Support System, Object-Oriented Data Model, Building Product Model, STEP-GARM
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	0ffe
authors	Bhat, R.R., Gauchel, J. and Van Wyk, S.
year	1993
title	Communication in Cooperative Building Design
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 481-493
summary	This paper addresses communication issues, which are crucial in any implementation of distributed design environments. Communication needs are specified and implemented in a prototype based on a modular knowledge-based approach for simulation of a distributed multi-user system. The results of these simulations are reported, which show communication to be scalable as the numbers of applications and the size of the design increases. Finally, the implications of the results on real distributed systems are discussed.
keywords	Building Design, Distributed Design Environments, Cooperative Design, Communication
series	CAAD Futures
last changed	2003/11/21 15:16

_id	4dd6
authors	Bhavnani, S.K., Garrett, J. and Shaw, D.S.
year	1993
title	Leading Indicators of CAD Experience
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 313-334
summary	Current interfaces and help facilities of CAD systems are not designed to respond to a user's performance. To develop such adaptive environments, a better understanding of the indicators of CAD experience is required. This paper discusses the results of studying behavior patterns of different types and levels of CAD users for a specific drawing task. The results show that the type and experience of the CAD user has a clear correlation to the pattern of commands used, the time taken, and the quality of drawing produced. By using the experimental data to train a neural network, the paper demonstrates a connectionist approach for experience assessment. This information, it is proposed, can provide input to an adaptive interface which generates unobtrusive interception to improve the performance of a CAD user. Future experiments to explore the issues of generality and interception are presented.
keywords	CAD user Modeling, Adaptive Interface, Neural Networks
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	aa7f
authors	Bollinger, Elizabeth and Hill, Pamela
year	1993
title	Virtual Reality: Technology of the Future or Playground of the Cyberpunk?
doi	https://doi.org/10.52842/conf.acadia.1993.121
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 121-129
summary	Jaron Lanier is a major spokesperson of our society's hottest new technology: VR or virtual reality. He expressed his faith in the VR movement in this quote which appears in The User's Guide to the New Edge published by Mondo 2000. In its most technical sense, VR has attracted the attention of politicians in Washington who wonder if yet another technology developed in the United States will find its application across the globe in Asia. In its most human element, an entire "cyberpunk movement" has appealed to young minds everywhere as a seemingly safe form of hallucination. As architecture students, educators, and practitioners around the world are becoming attracted to the possibilities of VR technology as an extension of 3D modeling, visualization, and animation, it is appropriate to consider an overview of virtual reality. In virtual reality a user encounters a computersimulated environment through the use of a physical interface. The user can interact with the environment to the point of becoming a part of the experience, and the experience becomes reality. Natural and instinctive body movements are translated by the interface into computer commands. The quest for perfection in this human-computer relationship seems to be the essence of virtual reality technology. To begin to capture the essence of virtual reality without first-hand experience, it is helpful to understand two important terms: presence and immersion. The sense of presence can be defined as the degree to which the user feels a part of the actual environment. The more reality the experience provides, the more presence it has. Immersion can be defined as the degree of other simulation a virtual reality interface provides for the viewer. A highly immersive system might provide more than just visual stimuli; for example, it may additionally provide simulated sound and motion, and simultaneously prevent distractions from being present.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	0e89
authors	Bradford, J.W., Cheng, N. and Kvan, Thomas
year	1994
title	Virtual Design Studios
doi	https://doi.org/10.52842/conf.ecaade.1994.163
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 163-167
summary	Beginning in 1993, small groups of students of architectural design at different institutions around the world participated in collaborative design projects using a variety of tools, including CAD, Internet and teleconferencing. This programme, known as the "Virtual Design Studio" (VDS), allows students to work collectively with colleagues from different cultures and climates who are thousands of kilometres and in different time zones. Most recently, in February 1994, four institutions in N. America, one in Europe, and one in S E Asia participated in VDS’94. This paper explains the operation of the VDS and explores the future of the VDS as a potential tool for architectural design education. In particular, we review what we have learned in employing computer tools to extend the teaching in design studios into a "virtual" experience.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	c207
authors	Branzell, Arne
year	1993
title	The Studio CTH-A and the Searching Picture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 129-140
summary	What happens during an architect’s search for the best solution? How does he (or she) begin, which tools are chosen, what happens when he comes to a standstill? The activities – sketching, discussions with other people, making models, taking walks to think, visits to the library, etc? What is an ordinary procedure and what is more specific? Do the tools have an impact on the final solution chosen? What happens during periods of no activity? Are they important? In which fields of activities are signs of the searching process to be found? In other words — what is the process of creative thinking for architects? Mikael Hedin and myself at Design Methods, Chalmers University of Technology, have started research into architects’ problem-solving. We have finished a pilot study on a very experienced architect working traditionally, without Cad (”The Bo Cederlöf Case”). We have started preliminary discussions with our second ”Case”, an architect in another situation, who has been working for many years with Cad equipment (Gert Wingårdh). For our next case, we will study a third situation – two or more architects who share the responsibility for the solution and where the searching is a consequence of a dialogue between equal partners. At present, we are preparing a report on theories in and methods for Searching and Creativity. I will give you some results of our work up till now, in the form of ten hypotheses on the searching process. Finally, I would like to present those fields of activity where we have so far found signs of searching. Our approach, in comparison with earlier investigations into searching (the most respected being Arnheim’s study on Picasso’s completion of the Guernica) is to collect and observe signs of searching during the process, not afterwards. We are, to use a metaphor, following in the footsteps of the hunter, recording the path he chooses, what marks he makes, what tools, implements and equipment he uses. For practising architects: a better understanding of what is going on and encouragement to try new ways of searching, for architectural students: better preparation and training for problem solving. It all began while we compared the different objects in our collection of sketches at the Chalmers STUDIO for Visualisation and Communication. (For some years, we have been gathering sketches by Alvar Aalto, Jorn Utzon, Ralph Erskine, Erik and Tore Ahlsén, Lewerenz, Nyrén, Lindroos, Wingårdh and others in a permanent exhibition). We observed similarities in these sketches which allowed us to frame ten hypotheses about the searching process.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	c372
authors	Calvert, T., Bruderlin, A., Mah, S., Schiphorst, T. and Welman, C.
year	1993
title	The Evolution of an Interface for Choreographers Evolving Design
source	Proceedings of ACM INTERCHI'93 Conference on Human Factors in Computing Systems 1993 pp. 115-122
summary	This paper describes the evolution of the interface to Life Forms, a compositional tool for the creation of dance choreography, and highlights some of the important lessons we have learned during a six year design and implementation period. The lessons learned can be grouped into two categories: 1) Process, and 2) Architecture of the Interface. Our goal in developing a tool for choreography has been to provide computer-based creative design support for the conception and development of dance. The evolution was driven by feedback from the choreographers and users who were members of the development team, combined with our knowledge of current thinking on design and composition. Although the interface evolved in a relatively unconstrained way, the resulting system has many of the features that theoretical discussion in human interface design has projected as necessary. The Life Forms interface has evolved incrementally with one major discontinuity where adoption of a new compositional primitive required a completely new version. The choreography and composition of a dance is a complex synthesis task which has much in common with design. Thus, the lessons learned here are applicable to the development of interfaces to such applications as computer aided design.
keywords	Composition; Design; User Interface; Dance; Complexity; Choreography; Human Animation
series	other
last changed	2002/07/07 16:01

_id	a336
authors	Calvo, Charles M.
year	1993
title	SOME EPISTEMOLOGICAL CONCERNS REGARDING ARTIFICIAL INTELLIGENCE AND KNOWLEDGE-BASED APPROACHES TO ARCHITECTURAL DESIGN - A RENEWED AGENDA
doi	https://doi.org/10.52842/conf.acadia.1993.155
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 155-162
summary	It has been noted that designers - when confronted with computers - have, by and large, refused to accept the introduction of apparently new design methodologies, and it has been speculated that this is the result of a failure of those methodologies to address the cognitive processes which take place in the course of designing. This position is somewhat suspect in that such innovations as computer-aided drafting -which also fail to recognize these processes have been widely accepted. It is perhaps more likely that the lack of acceptance results from a perception on the part of designers that the new methodologies either do not reflect some or all of those concerns that designers consider fundamental to design, or that they actively interfere with the designer's ability to accomplish what he/she sees as the goals of design. Given that the application of artificial intelligence and related work to architecture is still in its infancy, all of this suggests the need for a reassessment of the role of computing in design in order to clarify and strengthen those roles deemed appropriate. Two approaches to the integration of artificial intelligence and knowledge-based systems into architectural design practice are currently dominant. One attempts to create systems which can on their own produce designs, the other provides intelligent support for those doing design. It was, in part, the recognition of limitations in the ability of traditional CAD systems and building modelers to reflect what designers actually do that led to explorations into the idea of intelligent assistants. Development of such assistants was aided by research into the act and process of design through protocol and other studies. Although some work is currently being done in the development of artificial intelligence and knowledge based applications in architecture, and work continues to be done on the study of design methodologies, the bulk of available information in each of these areas remains in the realm of design disciplines related to but outside of architecture and do not reflect the explicit role of architectural design in the embodiment and expression of culture. The relationship of intelligence to culture has resulted in some skepticism regarding the ultimate capacity of neural nets and symbolically programmed computers in general. Significant work has been done questioning the rational tradition in computer development for its failure to address phenomena which are not easily subject to scientific analysis. Further skepticism regarding the role of artificial intelligence and knowledge-based or expert systems in architectural design has been emerging recently. Such criticism tends to focus on two issues: the nature of drawing as an activity which involves both the generation and interpretation of graphic artifacts, and the nature of the human designer as an active agent in the design process.
series	ACADIA
type	normal paper
last changed	2022/06/07 07:54

_id	cbe7
authors	Caturano, Umberto and Sanseverino di Marcellinara, Carlo
year	1993
title	Solid Modelling by Low-cost Hardware and Software: The Crystal Palace's Node
doi	https://doi.org/10.52842/conf.ecaade.1993.x.m6j
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	This paper describes the approach to the solid modelling by low-cost hardware and software, developed by a workgroup composed by staff members, young researchers and students of the University of Naples - Faculty of Architecture. The work was born in need of exposing to the students the project of Crystal Palace, designed in 1850 by J. Paxton, and used in the Italian universities as an example of first prefabrication by components and the organization of the yard. Using commercial programs and the students' computers, we had done a 3D model of the Crystal Palace's structural node, making an interesting experience based on the cooperation between university structures and private resources.
series	eCAADe
last changed	2022/06/07 07:50

_id	caadria2007_659
id	caadria2007_659
authors	Chen, Zi-Ru
year	2007
title	The Combination of Design Media and Design Creativity _ Conventional and Digital Media
doi	https://doi.org/10.52842/conf.caadria.2007.x.w5x
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Creativity is always interested in many fields, in particular, creativity and design creativity have many interpretations (Boden, 1991; Gero and Maher, 1992, 1993; Kim, 1990; Sternberg, 1988; Weisberg, 1986). In early conceptual design process, designers used large number of sketches and drawings (Purcell and Gero, 1998). The sketch can inspire the designer to increase the creativity of the designer’s creations(Schenk, 1991; Goldschmidt, 1994; Suwa and Tversky, 1997). The freehand sketches by conventional media have been believed to play important roles in processes of the creative design thinking(Goldschmidt, 1991; Schon and Wiggins, 1992; Goel, 1995; Suwa et al., 2000; Verstijnen et al., 1998; Elsas van and Vergeest, 1998). Recently, there are many researches on inspiration of the design creativity by digital media(Liu, 2001; Sasada, 1999). The digital media have been used to apply the creative activities and that caused the occurrenssce of unexpected discovery in early design processes(Gero and Maher, 1993; Mitchell, 1993; Schmitt, 1994; Gero, 1996, 2000; Coyne and Subrahmanian, 1993; Boden, 1998; Huang, 2001; Chen, 2001; Manolya et al. 1998; Verstijinen et al., 1998; Lynn, 2001). In addition, there are many applications by combination of conventional and digital media in the sketches conceptual process. However, previous works only discussed that the individual media were related to the design creativity. The cognitive research about the application of conceptual sketches design by integrating both conventional and digital media simultaneously is absent.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	0b24
authors	Chilton, J.C., Wester, T. and Yu, J.
year	1993
title	Exploring Structural Morphology Using CAD
doi	https://doi.org/10.52842/conf.ecaade.1993.x.d1k
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Often in the design process the student's imagination is restricted by their inability to visualise, model or accurately sketch ideas for innovative structural systems. By using CAD as a design tool it is possible to explore the morphology of complex structures and to be able to produce perspective drawings of them with relative ease. Within AutoCAD there is a small library of standard three-dimensional objects and surfaces that can be called upon to generate more complex forms. However, to further facilitate the architectural design process, an extended library of innovative structural forms would allow the professional designer, or student, greater design freedom and any increase in the palette of structural forms available should stimulate creativity. As practical examples, the paper describes how students have been encouraged to experiment with the use of structures which can only be physically modelled with difficulty and which are also difficult to represent on the two- dimensional surface of the drawing board unless the geometry has previously been determined by the methods described. These are (i) Reciprocal Frame three-dimensional beam grillage structures and (ii) plate domes created from lattice structures by point-to- plane duality. The problem, of representation of these structures has been overcome, in the first case, by generating AutoLISP procedures to draw the complex three-dimensional geometrical form automatically in AutoCAD and, in the second case, by the development of the computer program CADual.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cad5
authors	Coyne, R.F., Flemming, U., Piela, P. and Woodbury, R.
year	1993
title	Behavior Modeling in Design System Development
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 335-354
summary	We describe the development approach for a software environment to support the early phases in building design called SEED. The combination of capabilities offered by SEED to designers is novel and includes the integrated handling of solution prototypes. We give the reasons for using an object-oriented software engineering approach in the development of the system, which starts with a comprehensive behavioral model of the system from the user's perspective based on actors and use cases. We illustrate results from the first development phase and sketch the next phases. At the time of the CAAD Futures '93 conference, we will be able to report our experience in developing a first system prototype and to demonstrate the prototype.
keywords	Object-Oriented Software Engineering, Integrated Design Systems, Architectural Programming, Schematic Layout Design
series	CAAD Futures
email
last changed	2003/02/26 17:24

_id	eaea2005_000
id	eaea2005_000
authors	Dechène, Sigrun und Manfred Walz (Eds.)
year	2006
title	Motion, E-Motion and Urban Space
source	Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4, 260 p.
summary	Simulating the development and the image of architecture and urban design means to show how the environment of the future and the living conditions could develop. At the same time it is part of our task to explain our work to local people and to the public and to passion skills in methods, instruments and knowledge in planning to the next generation of architects, planners and last but not least to discuss and to renew them once more for ourselves. Our aim was also to reflect what we have done since starting the look through the key-hole of endoscopy. Meanwhile this look has been completed since the beginnings in 1993 much more by computer and monitor. It is not the question to take the endoscope or the computer as a methodical and instrumental approach. Nowadays we normally decide to take the endoscope and the computer. In preparing the conference and the workshop we thought that this should now also be the moment not only to inform each other and the participants on methods, tools and best practices in simulating and designing the environment but also to focus on the social and human consequences of perception, movement and use the present urban spaces and the urban space in future. So we proposed the theme “MOTION, E-MOTION and URBAN SPACE” and we invited a scientific expert in experimental psychology to give us some serious reflections and one or another hint on our research themes and methods. The contributions and discussions in the conference showed that the proposal has not only been accepted but has also been completed and enriched especially concerning the theme urban space, it’s processes of usage and it‘s atmosphere. Also in the themes of endoscopy and the research on modelling urban spaces and architecture, meanwhile nearly “traditional” ones, remarkable results were presented and discussed. A very important point of contributions and the following discussions was how to present our subjects to the interested public and to improve our own internal exchange. An object could be to enforce the research tasks in researching together even more.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	8b38
authors	Do, Ellen Yi-Luen and Gross, Mark D.
year	1998
title	The Sundance Lab- "Design Systems of the Future"
doi	https://doi.org/10.52842/conf.acadia.1998.008
source	ACADIA Quarterly, vol. 17, no. 4, pp. 8-10
summary	The last thirty years have seen the development of powerful new tools for architects and planners: CAD, 3D modeling, digital imaging, geographic information systems, and real time animated walkthroughs. That’s just the beginning. Based on our experience with CAD tools, analysis of design practice, and an understanding of computer hardware and software, we’re out to invent the next generation of tools. We think architects should be shakers and makers, not just consumers, of computer aided design. We started the Sundance Lab (for Computing in Design and Planning) in 1993 with a few people and machines. We’ve grown to more than a dozen people (mostly undergraduate students) and a diverse interdisciplinary array of projects. We’ve worked with architects and planners, anthropologists, civil engineers, geographers, computer scientists, and electrical engineers. Our work is about the built environment: its physical form and various information involved in making and inhabiting places. We cover a wide range of topics – from design information management to virtual space, from sketch recognition to design rationale capture, to communication between designer and computer. All start from the position that design is a knowledge based and information rich activity. Explicit representations of design information (knowledge, rationale, and rules) enables us to engage in more intelligent dialogues about design. The following describes some of our projects under various rubrics.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ddss9206
id	ddss9206
authors	Drach, A., Langenegger, M. and Heitz, S.
year	1993
title	Working with prototypes: from cad to flexible tools for integrated building design
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The formulation of design knowledge as concepts, goals and rules cannot be captured in fixed and valid statements. The dynamic modelling of concepts and goals is, on the contrary, part of the design process itself. Tools that effectively support architects in their design should therefore never use predefined mechanisms, but must be definable interactively according to design specifications. We propose the concept of prototypes as a cognitive model to represent and structure design knowledge. Prototypes incorporate an individual view of design in a synthetic and organizational model for a defined area of interest. They actively control and guide design processes in supporting the organizational concepts for solutions. The a+Tool implements these concepts on the basis of a modelling language. It provides a dynamic toolkit and user interface to support design as well as knowledge modelling.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9426
id	ddss9426
authors	Duijvestein, Kees
year	1994
title	Integrated Design and Sustainable Building
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In the international student-project "European Environmental Campus 91 TU Delft Dordrecht" 20 students from 13 European countries worked in september 1991, during three weeks on "EcologicalSketches for the Island of Dordrecht". They worked on four different scales: the region isle of Dordt / the district Stadspolders / the neighbourhood I the house and the block. The environmentaltheme's Energy, Water, Traffic & Noise, Landscape & Soil were together with spatial analyses combined with the different scales. This combination was organised following the scheme mentioned below. The characters stand for the students. During the first period they worked in research groups, during the last period more in design groups. For instance: student L works in the beginning with the students B, G and Q in the research group water. In the last period sheworks with K, M, N and 0 in the design group Neighbourhood. Those students worked earlier in the other research-groups and contribute now in the design-group their thematic environmental knowledge. The results were presented to the Dordrecht council, officials and press. In the next project in september and october 1993 we started earlier with the design groups. Ten Dutch and ten "Erasmus" students worked for six weeks on proposals for the Vinex location Wateringenthe Hague. Each morning they worked in the research groups each afternoon in the design groups. The research groups used the EcoDesign Tools, small applications in Excel on Apple Macintoshto quantify the environmental pressure.
series	DDSS
last changed	2003/08/07 16:36

For more results click below: