Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 114

Reformat results as: short short into frame detailed detailed into frame

_id	a336
authors	Calvo, Charles M.
year	1993
title	SOME EPISTEMOLOGICAL CONCERNS REGARDING ARTIFICIAL INTELLIGENCE AND KNOWLEDGE-BASED APPROACHES TO ARCHITECTURAL DESIGN - A RENEWED AGENDA
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 155-162
doi	https://doi.org/10.52842/conf.acadia.1993.155
summary	It has been noted that designers - when confronted with computers - have, by and large, refused to accept the introduction of apparently new design methodologies, and it has been speculated that this is the result of a failure of those methodologies to address the cognitive processes which take place in the course of designing. This position is somewhat suspect in that such innovations as computer-aided drafting -which also fail to recognize these processes have been widely accepted. It is perhaps more likely that the lack of acceptance results from a perception on the part of designers that the new methodologies either do not reflect some or all of those concerns that designers consider fundamental to design, or that they actively interfere with the designer's ability to accomplish what he/she sees as the goals of design. Given that the application of artificial intelligence and related work to architecture is still in its infancy, all of this suggests the need for a reassessment of the role of computing in design in order to clarify and strengthen those roles deemed appropriate. Two approaches to the integration of artificial intelligence and knowledge-based systems into architectural design practice are currently dominant. One attempts to create systems which can on their own produce designs, the other provides intelligent support for those doing design. It was, in part, the recognition of limitations in the ability of traditional CAD systems and building modelers to reflect what designers actually do that led to explorations into the idea of intelligent assistants. Development of such assistants was aided by research into the act and process of design through protocol and other studies. Although some work is currently being done in the development of artificial intelligence and knowledge based applications in architecture, and work continues to be done on the study of design methodologies, the bulk of available information in each of these areas remains in the realm of design disciplines related to but outside of architecture and do not reflect the explicit role of architectural design in the embodiment and expression of culture. The relationship of intelligence to culture has resulted in some skepticism regarding the ultimate capacity of neural nets and symbolically programmed computers in general. Significant work has been done questioning the rational tradition in computer development for its failure to address phenomena which are not easily subject to scientific analysis. Further skepticism regarding the role of artificial intelligence and knowledge-based or expert systems in architectural design has been emerging recently. Such criticism tends to focus on two issues: the nature of drawing as an activity which involves both the generation and interpretation of graphic artifacts, and the nature of the human designer as an active agent in the design process.
series	ACADIA
type	normal paper
last changed	2022/06/07 07:54

_id	ddss9211
id	ddss9211
authors	Gilleard, J. and Olatidoye, O.
year	1993
title	Graphical interfacing to a conceptual model for estimating the cost of residential construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper presents a method for determining elemental square foot costs and cost significance for residential construction. Using AutoCAD's icon menu and dialogue box' facilities, a non-expert may graphically select (i) residential configuration; (ii) construction quality level; (iii) geographical location; (iv) square foot area; and finally, (v) add-ons, e.g. porches and decks, basement, heating and cooling equipment, garages and carports etc. in order to determine on-site builder's costs. Subsequent AutoLisp routines facilitate data transfer to a Lotus 1-2-3 spreadsheet where an elemental cost breakdown for the project may be determined. Finally, using Lotus 1-2-3 macros, computed data is transferred back to AutoCAD, where all cost significant items are graphically highlighted.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9208
id	ddss9208
authors	Lucardie, G.L.
year	1993
title	A functional approach to realizing decision support systems in technical regulation management for design and construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Technical building standards defining the quality of buildings, building products, building materials and building processes aim to provide acceptable levels of safety, health, usefulness and energy consumption. However, the logical consistency between these goals and the set of regulations produced to achieve them is often hard to identify. Not only the large quantities of highly complex and frequently changing building regulations to be met, but also the variety of user demands and the steadily increasing technical information on (new) materials, products and buildings have produced a very complex set of knowledge and data that should be taken into account when handling technical building regulations. Integrating knowledge technology and database technology is an important step towards managing the complexity of technical regulations. Generally, two strategies can be followed to integrate knowledge and database technology. The main emphasis of the first strategy is on transferring data structures and processing techniques from one field of research to another. The second approach is concerned exclusively with the semantic structure of what is contained in the data-based or knowledge-based system. The aim of this paper is to show that the second or knowledge-level approach, in particular the theory of functional classifications, is more fundamental and more fruitful. It permits a goal-directed rationalized strategy towards analysis, use and application of regulations. Therefore, it enables the reconstruction of (deep) models of regulations, objects and of users accounting for the flexibility and dynamics that are responsible for the complexity of technical regulations. Finally, at the systems level, the theory supports an effective development of a new class of rational Decision Support Systems (DSS), which should reduce the complexity of technical regulations and restore the logical consistency between the goals of technical regulations and the technical regulations themselves.
series	DDSS
last changed	2003/08/07 16:36

_id	maver_071
id	maver_071
authors	Mathur, K. and Maver, T.W.
year	1993
title	Information Technology in the Management of Design and Construction
source	Management of Information Technology for Construction (Ed: K Mathur et al) World Scientific, 585-594
summary	This paper provides an overview of the developments in Information Technology (IT) and its impact on the Architecture, Engineering and Construction (AEC) industry. It takes note of what has transpired in the last two decades and how the evolution of this subject corresponds to the predictions which had been made at various times in the past. It concludes that changes in procedures, processes and structure of organisations are needed if the most effective use of IT is to be achieved, and it is timely to go beyond solutions which mimic and automate current processes. Strategic frameworks must be defined within which new solutions will emerge rather than specific technical solutions for individual design or automation tasks. Concurrent changes in the AEC professions and the management of projects and organisations will be required to support the new tools and techniques offered by IT. Thus no promises should be made purely on the basis of emerging technologies. Hence the paper makes no attempt to predict the future of the AEC industry even though integrated systems may become available to support creative, cooperative, multi-disciplinary design, and though such systems will assist construction automation tasks, maintenance and facility management.
series	other
type	normal paper
email
last changed	2015/02/20 11:30

_id	8077
authors	Shapira, A., Boyer, L.T. and Najem, Z.H.
year	1993
title	Decision support system for air base construction operations
source	The Int. Journal of Construction IT 1(2), pp. 69-82
summary	The United States Air Force has recently introduced a CAD software performing air base planning and operability functions. This paper presents a prototype system developed to support that software in enhancing decision-making processes for construction operations, by integrating its CAD/graphics capabilities with a database management system (DBMS). The system addresses the complexity and unique nature of the air base environment and takes due account of the importance of the efficient utilization of resources. It assists in the generation of alternative solutions and furnishes comparative and indicative evaluations of these, thus providing the decision maker with proper guidance towards the expeditious selection of good solution. System fundamentals and the rationale behind them are described. A typical scenario is presented, illustrating the concepts developed and demonstrating the potential benefits of the system as a practical decision-support tool. Although originally aimed for an air base environment, the proposed solution could also readily apply to civilian systems of similar characteristics.
series	journal paper
last changed	2003/05/15 21:45

_id	0051
authors	Wastell, D.G. and White, P.
year	1993
title	Using Process Technology to Support Cooperative work: Prospects and Design Issues
source	CSCW in Practice: An Introduction and Case Studies. pp. 105-126. Edited by Dan Diaper and Colston Sanger, London: Springer-Veriag
summary	CSCW is a diverse and eclectic field. The theme which unifies CSCW is the question of group coordination, how it is achieved as a social phenomenon and how it may be actively assisted by computer-based support. The nature of these social processes are variously discussed in many of this book's other chapters. The issue of what is "true" CSCW and what is not is a contentious academic issue. Support for non-routine "professional" work such as collaborative writing would be widely accepted as a paradigm of CSCW (see, in particular, Sharples, Chapter 4; Gilbert, chapter 5; and Diaper, Chapter 6). Electronic mail, however, does not count for some as CSCW, because it is "not really tuned (or tunable) to the needs of the work group" (Greif, 1988). Technologies which support routine work would appear to fall into a particularly controversial category. Traditional office automation systems come under this heading.
series	other
last changed	2003/04/23 15:14

_id	42ab
authors	Dagit, Charles E.
year	1993
title	Establishing Virtual Design Environments in Architectural Practice
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 513-522
summary	This paper attempts to specify the ideal computerized architectural design tool and outlines steps that are being taken to make this ideal a reality. Section 2 offers a user-centered assessment of the way technology is currently implemented in the design professions. Section 3 describes the state-of-the-art in high-end CAAD applications, including computer rendering, walk-through displays, and expert diagnostic sysWins. Section 4 details work in progress at Worldesign, Inc., a virtual worlds systems integration firm, which is developing Virtual Design Environment (VDE) systems.
keywords	Computer-Aided Architectural Design (CAAD), Computer-Aided Engineering (CAE), Virtual Worlds Technology, Visualization, Computer Generated Environments, Computer Modeling, Virtual Reality, Information Systems, Information Design
series	CAAD Futures
last changed	1999/04/07 12:03

_id	c05c
authors	Hovestadt, Ludger
year	1993
title	A4 Digital Building: Extensive Computer Support for Building Design, Construction, and Management
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 405-421
summary	The integrated design, construction, and management of buildings are described as being of unlimited complexity. The data structures required to support these tasks cannot be predefined and have- to be worked out during the design process. An instrument that integrates weakly and strongly structured data is necessary. A4 proposes - as a minimal structuring mechanism - the position of information in a dataspace. It offers diverse additional and optional structuring mechanisms. Examples from different domains show the particular strengths of the A4 integration model.
keywords	Architecture, Intelligent Building, CAD, Multi-Media, Hypermedia, Active Objects, Virtual Reality, Multi-User, Expert System, Case-Based Reasoning, Communication, Data-Mining
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	bdc1
authors	Kolodner, J.
year	1993
title	Case-Based Reasoning
source	San Mateo, CA:Morgan Kaufmann
summary	Case-based reasoning systems store information about situations in their memory. As new problems arise, similar situations are searched to help solve them. The author places special emphasis on applying case-based reasoning to complex real-world problem- solving tasks such as medical diagnosis, design, conflict resolution, and planning. The approach combines cognitive science and engineering, and is based on analysis of both expert and common- sense tasks. Guidelines for building case-based expert systems are provided. Annotation copyright Book News, Inc. Portland, Or. Book Description
series	other
last changed	2003/04/23 15:14

_id	7d26
authors	Pearson, D.G., Alexander, C. and Webster, Robin
year	2001
title	Working Memory and Expertise Differences in Design.
source	J. S. Gero, B. Tversky and T. Purcell (eds), 2001, Visual and Spatial Reasoning in Design, II - Key Centre of Design Computing and Cognition, University of Sydney, Australia
summary	The Creative Synthesis task devised by Finke and Slayton(1988) has been widely used as an experimental measure of mentalsynthesis, but previous studies have often failed to demonstrate anysignificant benefits of external support on participants’ performance.This paper discusses a study that examined novice and expert drawers’performance of synthesis using a modified stimuli set that was designedto increase the load on visuo-spatial working memory. The resultsshowed a significant increase in Transformational Complexity(Anderson & Hesltrup, 1993) of patterns produced by the expert groupwhile using sketching. It is argued that experts are more effective atusing sketching interactively to increase complexity, while novices relymore on using it as a simple memory aid.
series	other
email
more	http://www.arch.usyd.edu.au/kcdc/conferences/vr01/
last changed	2003/05/02 11:14

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	c372
authors	Calvert, T., Bruderlin, A., Mah, S., Schiphorst, T. and Welman, C.
year	1993
title	The Evolution of an Interface for Choreographers Evolving Design
source	Proceedings of ACM INTERCHI'93 Conference on Human Factors in Computing Systems 1993 pp. 115-122
summary	This paper describes the evolution of the interface to Life Forms, a compositional tool for the creation of dance choreography, and highlights some of the important lessons we have learned during a six year design and implementation period. The lessons learned can be grouped into two categories: 1) Process, and 2) Architecture of the Interface. Our goal in developing a tool for choreography has been to provide computer-based creative design support for the conception and development of dance. The evolution was driven by feedback from the choreographers and users who were members of the development team, combined with our knowledge of current thinking on design and composition. Although the interface evolved in a relatively unconstrained way, the resulting system has many of the features that theoretical discussion in human interface design has projected as necessary. The Life Forms interface has evolved incrementally with one major discontinuity where adoption of a new compositional primitive required a completely new version. The choreography and composition of a dance is a complex synthesis task which has much in common with design. Thus, the lessons learned here are applicable to the development of interfaces to such applications as computer aided design.
keywords	Composition; Design; User Interface; Dance; Complexity; Choreography; Human Animation
series	other
last changed	2002/07/07 16:01

_id	cad5
authors	Coyne, R.F., Flemming, U., Piela, P. and Woodbury, R.
year	1993
title	Behavior Modeling in Design System Development
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 335-354
summary	We describe the development approach for a software environment to support the early phases in building design called SEED. The combination of capabilities offered by SEED to designers is novel and includes the integrated handling of solution prototypes. We give the reasons for using an object-oriented software engineering approach in the development of the system, which starts with a comprehensive behavioral model of the system from the user's perspective based on actors and use cases. We illustrate results from the first development phase and sketch the next phases. At the time of the CAAD Futures '93 conference, we will be able to report our experience in developing a first system prototype and to demonstrate the prototype.
keywords	Object-Oriented Software Engineering, Integrated Design Systems, Architectural Programming, Schematic Layout Design
series	CAAD Futures
email
last changed	2003/02/26 17:24

_id	ddss9209
id	ddss9209
authors	De Gelder, J.T. and Lucardie, G.L.
year	1993
title	Knowledge and data modelling in cad/cam applications
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Modelling knowledge and data in CAD/CAM applications is complex because different goals and contexts have to be taken into account. This complexity makes particular demands upon representation formalisms. Today many modelling tools are based on record structures. By analyzing the requirements for a product model of a portal structure in steel, this paper shows that in many situations record structures are not well suited as a representation formalism for storing knowledge and data in CAD/CAM applications. This is illustrated by performing a knowledge-level analysis of the knowledge and data generated in the design and manufacturing process of a portal structure in steel.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9205
id	ddss9205
authors	De Scheemaker. A.
year	1993
title	Towards an integrated facility management system for management and use of government buildings
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The Government Building Agency in the Netherlands is developing an integrated facility management system for two of its departments. Applications are already developed to support a number of day-to-day facility management activities on an operational level. Research is now being carried out to develop a management control system to better plan and control housing and material resources.
series	DDSS
last changed	2003/08/07 16:36

_id	8326
authors	Diessenbacher, Claus and Rank, Ernst
year	1993
title	Teaching Design with CAD?
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.i1h
summary	Abstract as well as functionally dependant design exercises are essential components of an architectural education at nearly every university. Their goal is to provide architect students with a feeling for proportions, colours, materials etc., and to teach and train them in threedimensional thinking. Pictures and concepts, developed by the designer are materialized by various technologies such as with pencil and paper in the traditional two-dimensional techniques or with clay, wood, paper etc. in three-dimensional modeling. Now the computer and the CAD-system join the palette of the designers available resources in presentation as both a two-dimensional and a three-dimensional medium. Although CAD is often considered and taught to be only a better drafting tool, the educational goal of our group at the University of Dortmund is to employ CAD as a design support medium. The prerequisites for work with the computer and the CAD system are provided in a compulsory two semester undergraduate subject. Basic programming, work with spreadsheets etc. are some exemplary themes provided in the form of lectures and practical exercises. A main emphasis of this instruction is the mastery of three-dimensional working technology with a comprehensive CAD-System. In cooperation of our computer science group and architecture chairs, seminars involving the use of CAD as a three-dimensional design tool, are offered as graduate courses. The seminars consist of loops of modeling and evaluating objects in a three-dimensional space. With this, the most possible realistic studies in colour, light and proportion take place exclusively on the computer.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9206
id	ddss9206
authors	Drach, A., Langenegger, M. and Heitz, S.
year	1993
title	Working with prototypes: from cad to flexible tools for integrated building design
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The formulation of design knowledge as concepts, goals and rules cannot be captured in fixed and valid statements. The dynamic modelling of concepts and goals is, on the contrary, part of the design process itself. Tools that effectively support architects in their design should therefore never use predefined mechanisms, but must be definable interactively according to design specifications. We propose the concept of prototypes as a cognitive model to represent and structure design knowledge. Prototypes incorporate an individual view of design in a synthetic and organizational model for a defined area of interest. They actively control and guide design processes in supporting the organizational concepts for solutions. The a+Tool implements these concepts on the basis of a modelling language. It provides a dynamic toolkit and user interface to support design as well as knowledge modelling.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9426
id	ddss9426
authors	Duijvestein, Kees
year	1994
title	Integrated Design and Sustainable Building
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In the international student-project "European Environmental Campus 91 TU Delft Dordrecht" 20 students from 13 European countries worked in september 1991, during three weeks on "EcologicalSketches for the Island of Dordrecht". They worked on four different scales: the region isle of Dordt / the district Stadspolders / the neighbourhood I the house and the block. The environmentaltheme's Energy, Water, Traffic & Noise, Landscape & Soil were together with spatial analyses combined with the different scales. This combination was organised following the scheme mentioned below. The characters stand for the students. During the first period they worked in research groups, during the last period more in design groups. For instance: student L works in the beginning with the students B, G and Q in the research group water. In the last period sheworks with K, M, N and 0 in the design group Neighbourhood. Those students worked earlier in the other research-groups and contribute now in the design-group their thematic environmental knowledge. The results were presented to the Dordrecht council, officials and press. In the next project in september and october 1993 we started earlier with the design groups. Ten Dutch and ten "Erasmus" students worked for six weeks on proposals for the Vinex location Wateringenthe Hague. Each morning they worked in the research groups each afternoon in the design groups. The research groups used the EcoDesign Tools, small applications in Excel on Apple Macintoshto quantify the environmental pressure.
series	DDSS
last changed	2003/08/07 16:36

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	ddss9214
id	ddss9214
authors	Friedman, A.
year	1993
title	A decision-making process for choice of a flexible internal partition option in multi-unit housing using decision theory techniques
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Recent demographic changes have increased the heterogeneity of user groups in the North American housing market. Smaller households (e.g. elderly, single parent) have non-traditional spatial requirements that cannot be accommodated within the conventional house layout. This has created renewed interest in Demountable/Flexible internal partition systems. However, the process by which designers decide which project or user groups are most suited for the use of these systems is quite often complex, non-linear, uncertain and dynamic, since the decisions involve natural processes and human values that are apparently random. The anonymity of users when mass housing projects are conceptualized, and the uncertainty as to the alternative to be selected by the user, given his/her constantly changing needs, are some contributing factors to this effect. Decision Theory techniques, not commonly used by architects, can facilitate the decision-making process through a systematic evaluation of alternatives by means of quantitative methods in order to reduce uncertainty in probabilistic events or in cases when data is insufficient. The author used Decision Theory in the selection of flexible partition systems. The study involved a multi-unit, privately initiated housing project in Montreal, Canada, where real site conditions and costs were used. In this paper, the author outlines the fundamentals of Decision Theory and demonstrates the use of Expected Monetary Value and Weighted Objective Analysis methods and their outcomes in the design of a Montreal housing project. The study showed that Decision Theory can be used as an effective tool in housing design once the designer knows how to collect basic data.
series	DDSS
last changed	2003/08/07 16:36

For more results click below: