Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 213

Reformat results as: short short into frame detailed detailed into frame

_id	0b24
authors	Chilton, J.C., Wester, T. and Yu, J.
year	1993
title	Exploring Structural Morphology Using CAD
doi	https://doi.org/10.52842/conf.ecaade.1993.x.d1k
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Often in the design process the student's imagination is restricted by their inability to visualise, model or accurately sketch ideas for innovative structural systems. By using CAD as a design tool it is possible to explore the morphology of complex structures and to be able to produce perspective drawings of them with relative ease. Within AutoCAD there is a small library of standard three-dimensional objects and surfaces that can be called upon to generate more complex forms. However, to further facilitate the architectural design process, an extended library of innovative structural forms would allow the professional designer, or student, greater design freedom and any increase in the palette of structural forms available should stimulate creativity. As practical examples, the paper describes how students have been encouraged to experiment with the use of structures which can only be physically modelled with difficulty and which are also difficult to represent on the two- dimensional surface of the drawing board unless the geometry has previously been determined by the methods described. These are (i) Reciprocal Frame three-dimensional beam grillage structures and (ii) plate domes created from lattice structures by point-to- plane duality. The problem, of representation of these structures has been overcome, in the first case, by generating AutoLISP procedures to draw the complex three-dimensional geometrical form automatically in AutoCAD and, in the second case, by the development of the computer program CADual.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	26ec
authors	Van Grootel, Marc
year	1994
title	LAVA - A Virtual Studio on the Internet
doi	https://doi.org/10.52842/conf.ecaade.1994.168
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 168-174
summary	The Lab for Architecture is an Internet based information service for Architecture. It was initiated by students of The University of Technology in Eindhoven in 1993. LAVA has three important objectives. 1) Providing pointers to interesting information about architecture. 2) Providing new information to the Internet, for example: student projects, discussions, faculty research and course material. 3) Exploring the possibilities of network-based media by initiating special projects, for example cooperationís between different Universities. The last part of this paper tries to indicate some of the possible influences network-based media can have on education.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	e9f1
authors	Alaimo, G., Pellitteri, G. and Scianna, A.
year	1993
title	A Tool for Typological Analysis
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q0g
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Any design problem is faced drawing from the architect's knowledge both case knowledge and general knowledge. One type of the latter is abstracted from a multiplicity of cases of which the common features are recognised in such a way as to single out a prototype representing in the best way a class of architectural objects. If applied to a set of residential buildings and to the flats in them the analysis is typological and it is one of the fundamental ways of acquiring general knowledge to be used to face design problems. The tool we present is aimed at such a type of analysis and is based on the idea that it possible to acquire qualitative knowledge through the statistical analysis of measurable characteristics of the examined architectural objects. It has been tested by applying it to the typological analysis of a set of flats of illegal buildings in Sicily. The procedure is organised in two main phases. The first one consists in a series of elaborations performed during the reading of architectural organism; the second one consists in a series of statistical analyses on the results (characteristic variables) of the first.
series	eCAADe
last changed	2022/06/07 07:50

_id	2ff9
id	2ff9
authors	Ataman, Osman
year	1993
title	Knowledge-based Stair Design
doi	https://doi.org/10.52842/conf.acadia.1993.163
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 163-171
summary	The application of computer--based technique to support architectural design has often concentrated on matters of representation. Typically, this means computer-aided drafting, and less frequently, computer-aided modeling and visualization. The promise of new computer-based tools to support the process of design has thus far failed to produce any significant tool that has had a widespread impact on the architectural profession. Most developments remain in university based research labs where they are used as teaching instruments in CAD courses or less often in design studios. While there are many reasons for this lack of dissemination, including a reluctance on the part of the architectural profession itself, the primary obstacles deal with difficulties in explicating design knowledge, representing this knowledge in a manner that can be used for design, and providing an intuitive and effective user interface, allowing the designer to easily use the tool for its intended purpose. This study describes a system that has been developed to address a number of these issues. Based on research findings from the field of Artificial Intelligence which expounds on the need for multiple techniques to represent any complex area of knowledge, we have selected a particular approach that focuses on multiple techniques for design representation. We review this approach in depth by considering its many facets necessary when implementing a knowledge-based system. We then partially test the viability of this approach through a small case study, implementing a knowledge-based system for designing stairs. While this effort only deals with a small part of the total design process, it does explore a number of significant issues facing the development of computer-based design assistants, and suggests several techniques for addressing these concerns.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	50ce
authors	Baker, R.
year	1993
title	Designing the Future: The Computer Transformation of Reality
source	Thames and Hudson, Hong Kong
summary	A coffee table book on computer applications? Well, yes, because it does deal largely with matters of graphic design in architecture, fashion and textiles, painting, and photography; but it also has items which might be of interest in its sections on digital publication, typography, and electronic communication in general. It also seeks to discuss the way in which these applications may force us to change the way we think. Robin Baker writes in an unfortunately stiff and abstract manner about the impact computer programmes have had on the world of art and design, but the graphic images and extended picture captions help to keep the reader awake - even though the main text sometimes disappears for two or three double page spreads on end. There are also smatterings of pretentious art-world-speak about 'solving certain spatial problems' (in the design of curtain fabrics or teapots) and the introduction (inevitable?) of new jargon: 'shape grammar'(a list of so-called shape 'rules'), 'repurposing' (putting somebody else's work to new use) and 'genetic algorithms' (sculptural designs based on re-processed organic shapes - most of which look like stomach tumours). In his favour, Baker very generously credits students and commercial designers who have produced the effects he describes and illustrates so well. For writers, he sketches in the possibilities of Hypertext and Hypermedia and points to the future of Hyper publishing which he (and Rupert Murdoch)believes will be with us before the end of the century. He seems to have a good oversight of what is possible and practicable - though one wonders how up-to-date the view is when his book may have begun its life anything up to three years ago. He usefully points out that much new technology exists in or drags along with it the forms of earlier periods - so that in an age of electronic communication we still have printed books as a dominant cultural form. Maybe this is as it should be - but Baker makes a persuasive case for the claim that All This is Going to Change.
series	other
last changed	2003/04/23 15:14

_id	ecaade2014_146
id	ecaade2014_146
authors	Davide Ventura and Matteo Baldassari
year	2014
title	Grow: Generative Responsive Object for Web-based design - Methodology for generative design and interactive prototyping
doi	https://doi.org/10.52842/conf.ecaade.2014.2.587
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 587-594
wos	WOS:000361385100061
summary	This paper is part of the research on Generative Design and is inspired by the ideas spread by the following paradigms: the Internet of Things (Auto-ID Center, 1999) and the Pervasive/Ubiquitous Computing (Weiser, 1993). Particularly, the research describes a number of case studies and, in detail, the experimental prototype of an interactive-design object: “Grow-1”. The general assumptions of the study are as follows: a) Developing the experimental prototype of a smart-design object (Figure 1) in terms of interaction with man, with regard to the specific conditions of the indoor environment as well as in relation to the internet/web platforms. b) Setting up a project research based on the principles of Generative Design.c) Formulating and adopting a methodology where computational design techniques and interactive prototyping ones converge, in line with the principles spread by the new paradigms like the Internet of Things.
keywords	Responsive environments and smart spaces; ubiquitous pervasive computing; internet of things; generative design; parametric modelling
series	eCAADe
email
last changed	2022/06/07 07:55

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	1766
id	1766
authors	Gero, J. S.
year	1993
title	New knowledge-based CAD models of design
source	K. Mathur, M. Betts and K. W. Tham (eds), Management of Information Technology for Construction, World Scientific, Singapore, pp. 199-208
summary	Knowledge-based systems utilise concepts from artificial intelligence. They are the bases of new models of design which have the potential to extend the utility of computers in design. This paper briefly reviews current research support new knowledge-based CAd-models if design before describing and elaborating two such models. One is case-based design and the other is creative design.
series	other
type	normal paper
email
more	http://www.arch.usyd.edu.au/~john/
last changed	2006/05/27 18:27

_id	e3d3
authors	Gudna , François and Zreik, Khaldoun
year	1993
title	Analogy, Exploration and Generalization: Three Activities for Knowledge-Based Architectural Design Systems
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 255-272
summary	We propose in this article a system architecture based on reasoning through analogy with past cases or situations. Starting with a project and a sketch provided by the user, the system locates analogous situations in the past and uses these to improve a problem's description. A sufficiently improved description will in turn activate a constraint-satisfaction mechanism. Previous situations are stored in a memory bank of objects that match the description of past problems to the generic descriptions of past solutions. Three mechanisms can be distinguished within the system: an analogy mechanism collects hypotheses about the variables and constraints to be satisfied in past situations, an exploratory mechanism searches through the solution space, a generalizing mechanism looks at experiences and memorizes only what is needed to collect hypotheses.
keywords	Knowledge-Based System, Case-Based Reasoning, Constraints Satisfaction, Explanation-Based Learning, Object-Oriented Representation
series	CAAD Futures
last changed	1999/04/07 12:03

_id	c05c
authors	Hovestadt, Ludger
year	1993
title	A4 Digital Building: Extensive Computer Support for Building Design, Construction, and Management
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 405-421
summary	The integrated design, construction, and management of buildings are described as being of unlimited complexity. The data structures required to support these tasks cannot be predefined and have- to be worked out during the design process. An instrument that integrates weakly and strongly structured data is necessary. A4 proposes - as a minimal structuring mechanism - the position of information in a dataspace. It offers diverse additional and optional structuring mechanisms. Examples from different domains show the particular strengths of the A4 integration model.
keywords	Architecture, Intelligent Building, CAD, Multi-Media, Hypermedia, Active Objects, Virtual Reality, Multi-User, Expert System, Case-Based Reasoning, Communication, Data-Mining
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	37b2
authors	Johansson, P.
year	2000
title	Case-Based Structural Design - using weakly structured product and process information
source	Chalmers University of Technology, Division of Steel and Timber Structures, Publ. S 00:7, Göteborg
summary	Empirical knowledge plays a significant role in the human reasoning process. Previous experiences help in understanding new situations and in finding solutions to new problems. Experience is used when performing different tasks, both those of routine character and those that require specific skill. This is also the case for structural designers. Over 50% of the work done by the designer on a day-to-day basis is routine design that consists of modifying past designs (Moore 1993). That is, most of the design problems that the designer solves have been solved before, in many cases over and over again. In recent years, researchers have started to study if cases (information about specific problem-solving experiences) could be used as a representation of experiential knowledge. Making use of past experience in the form of cases is commonly known as Case-Based Reasoning (CBR). A requirement for Case-Based Design (Case-Based Reasoning applied in design) to be successful is that the design information is computerized. One information type used in structural design that is starting to become computerized is the one in design calculation documents. Such information is weakly structured (which holds for much of the information representing experience) and it contains both product and process information. In this thesis it is shown how the weak structure of this information can be used to subdivide it into components, which in turn makes it possible to apply the object-oriented abstraction principles also to this kind of information. It is also shown how the detailed design process can be represented and how this representation can facilitate automatic acquisition, retrieval of relevant old design information, and adaptation of this information. Two prototypes BridgeBase and ARCADE have been developed, where the principles described above are applied. Using ARCADE, the more general of these two prototypes, it is presented how information in computerized design calculation documents, gathered from real projects, can serve as containers and carriers for both project information and experience. The experience from the two prototypes shows that Case-Based Design can be usable as a tool for structural engineers.
series	other
last changed	2003/04/23 15:14

_id	bdc1
authors	Kolodner, J.
year	1993
title	Case-Based Reasoning
source	San Mateo, CA:Morgan Kaufmann
summary	Case-based reasoning systems store information about situations in their memory. As new problems arise, similar situations are searched to help solve them. The author places special emphasis on applying case-based reasoning to complex real-world problem- solving tasks such as medical diagnosis, design, conflict resolution, and planning. The approach combines cognitive science and engineering, and is based on analysis of both expert and common- sense tasks. Guidelines for building case-based expert systems are provided. Annotation copyright Book News, Inc. Portland, Or. Book Description
series	other
last changed	2003/04/23 15:14

_id	2004_256
id	2004_256
authors	Lai, Ih-Cheng
year	2004
title	Interactive Patterns for Associating Ideas during Brainstorming
doi	https://doi.org/10.52842/conf.ecaade.2004.256
source	Architecture in the Network Society [22nd eCAADe Conference Proceedings / ISBN 0-9541183-2-4] Copenhagen (Denmark) 15-18 September 2004, pp. 256-261
summary	Idea association is an important behavior to generate diverse ideas during brainstorming. Through three linking principles (similarity, contrast and contiguity), idea association involves a dynamic linking process between ideas and design cases. Based on the knowledge representation issue-concept-form proposed by Oxman (1993), three interactive patterns between ideas and design cases are investigated. Finally, some computational mechanisms for supporting the linkage of idea association are discussed.
keywords	Idea Association, Linking, Case Representation, Case Based Reasoning, Brainstorming
series	eCAADe
last changed	2022/06/07 07:52

_id	ddss9215
id	ddss9215
authors	Mortola, E. and Giangrande, A.
year	1993
title	A trichotomic segmentation procedure to evaluate projects in architecture
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper illustrates a model used to construct the evaluation module for An Interface for Designing (AID), a system to aid architectural design. The model can be used at the end of every cycle of analysis-synthesis-evaluation in the intermediate phases of design development. With the aid of the model it is possible to evaluate the quality of a project in overall terms to establish whether the project is acceptable, whether it should be elaborated ex-novo, or whether it is necessary to begin a new cycle to improve it. In this last case, it is also possible to evaluate the effectiveness of the possible actions and strategies for improvement. The model is based on a procedure of trichotomic segmentation, developed with MCDA (Multi-Criteria Decision Aid), which uses the outranking relation to compare the project with some evaluation profiles taken as projects of reference. An application of the model in the teaching field will also be described.
series	DDSS
last changed	2003/08/07 16:36

_id	8f1f
authors	Oxman, Rivka and Oxman, Robert
year	1993
title	Precedents: Memory Structure in Design Case Libraries
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 273-287
summary	The paper presents an approach to a memory structure of design ideas in a library of design precedents. A model of case memory for design is developed. The model is composed of distinct chunks of knowledge called design stories. A formalism for the design story is proposed which represents the linkage between design issue, concept and form in stories. Stories are structured in memory according to a semantic network. The lexicon of the semantic network acts as a memory index. The memory structure and indexing system are demonstrated to enhance search and to support crosscontextual browsing and exploration in the precedent library. The approach is demonstrated in a pilot design aid system in the task domain of early conceptual design in architecture.
keywords	Knowledge-Based Systems, Case-Based Reasoning, Case-Based Design Aids Systems, Precedents, Electronic Libraries, Memory Organization, Indexing, Storage, Retrieval, Hypermedia Systems, Content Analysis
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	sigradi2020_23
id	sigradi2020_23
authors	Patino Mazo, Ever; Vélez-Granda, Sandra Marcela; Jaramillo Florez, Juan David
year	2020
title	Translation of cultural patterns through a "design for emotions" tool and the "Pre-inventive forms" method, into handicraft product design with cultural identity
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 23-30
summary	Based on the premise that the form generation phase in the design of handicraft products is one of the most complexes, the article proposes the use of the "Roles of products and users expectations" model by Jacob-Dazarola (2015), and “Pre-inventive 2D and 3D forms” method based on Finke (1993). The methods are evidenced in a case study, in which five handicraft product projects were developed, based on the cultural identity of Guapi, a town in the Colombian Pacific.
keywords	Design for emotions, participatory observation, cultural patterns, pre-inventive forms, handicraft
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	8ce2
authors	Szalapaj, Peter J.
year	1993
title	Contextual Hypermedia in the Design Studio
doi	https://doi.org/10.52842/conf.ecaade.1993.x.i7f
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	The focus of this paper is on the development and use of hypermedia applications for the presentation of design studio projects, based upon the author's own recent experience of teaching CAD at both undergraduate and postgraduate level. The contention of this paper is that this activity cannot be reduced to routine Hypercard stack development. Instead, the development of applications in this area need to give support to the expression of the design-theoretical issues that are central to the presentation of any design studio project, by exploiting the many issues of concern that are emerging from the field of human- computer interaction (HCI) The hypermedia application i.e. in this case design-theoretical views of a design project, will inevitably influence the specification of a user-interface, and hence the presentation and appearance of the design project. This paper will investigate the extent to which the interface can be separated out from the application and the converse issue namely, whether non-contextual hypermedia environments restrict design applications.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	4cd5
authors	Thiel, Philip
year	1993
title	A Better Understanding of The Role of Endoscopy as a Tool in Architecture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 123-128
summary	As the most tool-dependent species on our planet, our technology determines our activities and thus defines our existence. Because of this a clear understanding of the ends-means relationship of our tools is of critical social- and professional-concern. Endoscopy, or the use of periscopic-like devices to extract human eye-level visual images, static or dynamic, from iconic scale models of proposed environments, is a case in point. Use is appropriate at advanced stages of planning and design, when such experiential simulations are necessary for both professional evaluation and lay approval. But note that the simulation is only a means to an end, and that the fundamental purpose is to evoke a response to a proposal. Simulation and response are opposite sides of the same coin, and the response is the goal. Any such responses are meaningful only with reference to the ultimate users’ experiential preferences, preferably explicitly established as ”performance specifications” before the start of the design process in consultation with a representative sample of these people. This implies the necessity of a means to identify these beneficiaries of our work, and a means to characterize their environmental ”experiential profiles”. It also requires a means for the discursive scripting of their experiential preferences. The development of a design oriented to the achievement of these ends then depends on a similar time-based scoring for the description of sequentially-experienced environmental attributes, hypothesized as related to these responses. Endoscopy then takes its place as the means for a penultimate check on the experiential design-hypotheses, in conjunction with suitable means to record the simulates’ responses in the same format as the original experiential performance specifications, for comparison therewith. The danger in being the most tool-dependent species on Earth is that in our necessary concern with technological means we may loose sight of our ultimate human ends; as suggested by the apothegm ”the operation was a success, but the patient died”. Our inexorable impetus toward technological development means that the specialized training that is inherent in professional education tends to separate and distance the perceptions of those so conditioned from those of the many others who are the presumed beneficiaries of their efforts.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	0051
authors	Wastell, D.G. and White, P.
year	1993
title	Using Process Technology to Support Cooperative work: Prospects and Design Issues
source	CSCW in Practice: An Introduction and Case Studies. pp. 105-126. Edited by Dan Diaper and Colston Sanger, London: Springer-Veriag
summary	CSCW is a diverse and eclectic field. The theme which unifies CSCW is the question of group coordination, how it is achieved as a social phenomenon and how it may be actively assisted by computer-based support. The nature of these social processes are variously discussed in many of this book's other chapters. The issue of what is "true" CSCW and what is not is a contentious academic issue. Support for non-routine "professional" work such as collaborative writing would be widely accepted as a paradigm of CSCW (see, in particular, Sharples, Chapter 4; Gilbert, chapter 5; and Diaper, Chapter 6). Electronic mail, however, does not count for some as CSCW, because it is "not really tuned (or tunable) to the needs of the work group" (Greif, 1988). Technologies which support routine work would appear to fall into a particularly controversial category. Traditional office automation systems come under this heading.
series	other
last changed	2003/04/23 15:14

For more results click below: