Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 253

Reformat results as: short short into frame detailed detailed into frame

_id	37b2
authors	Johansson, P.
year	2000
title	Case-Based Structural Design - using weakly structured product and process information
source	Chalmers University of Technology, Division of Steel and Timber Structures, Publ. S 00:7, Göteborg
summary	Empirical knowledge plays a significant role in the human reasoning process. Previous experiences help in understanding new situations and in finding solutions to new problems. Experience is used when performing different tasks, both those of routine character and those that require specific skill. This is also the case for structural designers. Over 50% of the work done by the designer on a day-to-day basis is routine design that consists of modifying past designs (Moore 1993). That is, most of the design problems that the designer solves have been solved before, in many cases over and over again. In recent years, researchers have started to study if cases (information about specific problem-solving experiences) could be used as a representation of experiential knowledge. Making use of past experience in the form of cases is commonly known as Case-Based Reasoning (CBR). A requirement for Case-Based Design (Case-Based Reasoning applied in design) to be successful is that the design information is computerized. One information type used in structural design that is starting to become computerized is the one in design calculation documents. Such information is weakly structured (which holds for much of the information representing experience) and it contains both product and process information. In this thesis it is shown how the weak structure of this information can be used to subdivide it into components, which in turn makes it possible to apply the object-oriented abstraction principles also to this kind of information. It is also shown how the detailed design process can be represented and how this representation can facilitate automatic acquisition, retrieval of relevant old design information, and adaptation of this information. Two prototypes BridgeBase and ARCADE have been developed, where the principles described above are applied. Using ARCADE, the more general of these two prototypes, it is presented how information in computerized design calculation documents, gathered from real projects, can serve as containers and carriers for both project information and experience. The experience from the two prototypes shows that Case-Based Design can be usable as a tool for structural engineers.
series	other
last changed	2003/04/23 15:14

_id	0de6
authors	Robertson, G.G., Card, S.K. and Mackinlay, J.D.
year	1993
title	Information visualization using 3D interactive animation
source	Communications of the ACM 36(4): 57-7 1
summary	UI innovations are often driven by a combination of technology advances and application demands. On the technology side, advances in interactive computer graphics hardware, coupled with low-cost mass storage, have created new possibilities for information retrieval systems in which UIs could play a more central role. On the application side, increasing masses of information confronting a business or an individual have created a demand for information management applications. In the 1980s, text-editing forced the shaping of the desktop metaphor and the now standard GUI paradigm. In the 1990s, it is likely that information access will be a primary force in shaping the successor to the desktop metapho. This article presents an experimental system, the Information Visualizer (see figure 1), which explores a UI paradigm that goes beyond the desktop metaphor to exploit the emerging generation of graphical personal computers and to support the emerging application demand to retrieve, store, manipulate, and understand large amounts of infromation. The basic problem is how to utilize advancing graphics technology to lower the cost of finding information and accessing it once found (the information's "cost structure"). We take four broad strategies: making the user's immediate workspace larger, enabling user interaction with multiple agents, increasing the real-time interaction rate between user and system, and using visual abstraction to shift information to the perceptual system to speed information assimilation and retrieval.
series	journal paper
last changed	2003/04/23 15:14

_id	ddss9218
id	ddss9218
authors	Hensen, J.L.M.
year	1993
title	Design support via simulation of building and plant thermal interaction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Design decision support related to building energy consumption and/or indoor climate should be based on an integral approach to the environment, the building, heating, ventilating and air-conditioning (HVAC) system, and the occupants. The tools to achieve this are now available in the form of computer simulation systems which treat the building and plant as an integrated dynamic system. Although its potentials reach beyond the area of Computer Aided Building Design, the paper describes building and plant energy simulation within the context of CABD, design decision support and design evaluation. Currently, computer simulation is only used indirectly as a design decision support mechanism; that is, its power is not delivered very efficiently to the design profession. This paper suggests some future research directions. These are aimed at providing a mechanism to overcome this problem by developing an intelligent front end' which bridges the gap between sophisticated computer simulation tools and the design profession.
series	DDSS
last changed	2003/08/07 16:36

_id	caadria2007_675
id	caadria2007_675
authors	Huang, Joseph Chuen-Huei
year	2007
title	Decision Support System for Modular Houses
doi	https://doi.org/10.52842/conf.caadria.2007.x.x9q
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Presently, only a small percentage of people in the world typically hire an architect to design and build a home which is tailored to their preference. Besides the architect’s fee, clients also need to wait an interminable time for design and construction. Factory-made prefabricated housing systems tried to solve this problem previously. However, most pioneers failed to address the issues of variability and individual needs (Kieran & Timberlake, 2004). Plants closed because they produced more than the market demand, and prefabricated housing provided less flexibility than the traditional stick-built housing. The advanced digital technology makes it possible to communicate design ideas and concepts to others more effectively. The project delivery process leads itself to customization, embodying principles of lean production (Pine, 1993), flexible computer-integrated design interaction with clients, and reduced cycle times; all effecting rapid response between consumers and producers.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	bdc5
authors	Lehane, A., Wright, D. and Lambourne, E.
year	1993
title	Parallel Modeling: Addressing the Issues of Creative Designing in CAD Environments II. Special Applications
source	Proceedings of the Fifth International Conference on Human-Computer Interaction 1993 v.1 pp. 249-254
summary	We postulate that Industrial Designers, in general, solve a given problem by generating a series of proposed solutions to that problem, each proposal, in theory, helps the designer to converge on the ideal solution. Any number of solutions may be under continuous development at any one time and any previous solutions should always be available for appraisal and viewing. The single modeling environment provided in traditional Computer Aided Design (CAD) systems does not support this practice. Thus, CAD systems are primarily used to address the final phases of the design process, such as analysis, visualisation and detailing. This is surely not utilising the full potential of such a powerful design tool. In an attempt to develop a less restrictive working practice for CAD users, we consider a parallel modeling approach. This solution allows the simultaneous development, design and review of a number of computer based solutions.
keywords	Paper Based Design Process; Parallel Modeling; Computer Based Design Process; Sets; Industrial Design; Set Theory; Directed Acyclic Graph; Seed
series	other
last changed	2002/07/07 16:01

_id	e9f1
authors	Alaimo, G., Pellitteri, G. and Scianna, A.
year	1993
title	A Tool for Typological Analysis
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q0g
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Any design problem is faced drawing from the architect's knowledge both case knowledge and general knowledge. One type of the latter is abstracted from a multiplicity of cases of which the common features are recognised in such a way as to single out a prototype representing in the best way a class of architectural objects. If applied to a set of residential buildings and to the flats in them the analysis is typological and it is one of the fundamental ways of acquiring general knowledge to be used to face design problems. The tool we present is aimed at such a type of analysis and is based on the idea that it possible to acquire qualitative knowledge through the statistical analysis of measurable characteristics of the examined architectural objects. It has been tested by applying it to the typological analysis of a set of flats of illegal buildings in Sicily. The procedure is organised in two main phases. The first one consists in a series of elaborations performed during the reading of architectural organism; the second one consists in a series of statistical analyses on the results (characteristic variables) of the first.
series	eCAADe
last changed	2022/06/07 07:50

_id	d6a3
authors	Alkhoven, Patricia
year	1993
title	The Changing Image of the City
source	University of Utrecht
summary	The image and structure of a town are constantly subject to a dynamic process of change and continuity. Visual material, such as photographs, historical maps, town plans, drawings and prints, show us the impact of these changes on the image of a town. The main point of departure of this study stems from the question of how this process of change and continuity is visually detectable in a town or city. The fact that the ideas about the appearance of a city (gradually) change, can be read from the often subtle changes in the townscape. Though in many cases we have a general knowledge of the choices made in urban management, the most difficult problem is to detect the underlying decisions. This raises the question to what extent these changes and also the continuities are the result of deliberate choices in urban management and to what extent they are autonomous developments in the townscape resistant to interventions. Using different kinds of visual information as a basis, computer visualization techniques are used in the present study to examine some cartographic maps and to reconstruct the urban development in the twentieth century of the town of Heusden three-dimensionally in significant phases. The resulting visualization provides us with a tool for a better understanding of the dynamics of urban transformation processes, typologies and morphological changes and continuities.
keywords	3D City Modeling
series	thesis:PhD
email
more	http://www.library.uu.nl/digiarchief/dip/diss/01754573/hfdheus.htm
last changed	2003/05/15 21:36

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	c207
authors	Branzell, Arne
year	1993
title	The Studio CTH-A and the Searching Picture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 129-140
summary	What happens during an architect’s search for the best solution? How does he (or she) begin, which tools are chosen, what happens when he comes to a standstill? The activities – sketching, discussions with other people, making models, taking walks to think, visits to the library, etc? What is an ordinary procedure and what is more specific? Do the tools have an impact on the final solution chosen? What happens during periods of no activity? Are they important? In which fields of activities are signs of the searching process to be found? In other words — what is the process of creative thinking for architects? Mikael Hedin and myself at Design Methods, Chalmers University of Technology, have started research into architects’ problem-solving. We have finished a pilot study on a very experienced architect working traditionally, without Cad (”The Bo Cederlöf Case”). We have started preliminary discussions with our second ”Case”, an architect in another situation, who has been working for many years with Cad equipment (Gert Wingårdh). For our next case, we will study a third situation – two or more architects who share the responsibility for the solution and where the searching is a consequence of a dialogue between equal partners. At present, we are preparing a report on theories in and methods for Searching and Creativity. I will give you some results of our work up till now, in the form of ten hypotheses on the searching process. Finally, I would like to present those fields of activity where we have so far found signs of searching. Our approach, in comparison with earlier investigations into searching (the most respected being Arnheim’s study on Picasso’s completion of the Guernica) is to collect and observe signs of searching during the process, not afterwards. We are, to use a metaphor, following in the footsteps of the hunter, recording the path he chooses, what marks he makes, what tools, implements and equipment he uses. For practising architects: a better understanding of what is going on and encouragement to try new ways of searching, for architectural students: better preparation and training for problem solving. It all began while we compared the different objects in our collection of sketches at the Chalmers STUDIO for Visualisation and Communication. (For some years, we have been gathering sketches by Alvar Aalto, Jorn Utzon, Ralph Erskine, Erik and Tore Ahlsén, Lewerenz, Nyrén, Lindroos, Wingårdh and others in a permanent exhibition). We observed similarities in these sketches which allowed us to frame ten hypotheses about the searching process.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	0b24
authors	Chilton, J.C., Wester, T. and Yu, J.
year	1993
title	Exploring Structural Morphology Using CAD
doi	https://doi.org/10.52842/conf.ecaade.1993.x.d1k
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Often in the design process the student's imagination is restricted by their inability to visualise, model or accurately sketch ideas for innovative structural systems. By using CAD as a design tool it is possible to explore the morphology of complex structures and to be able to produce perspective drawings of them with relative ease. Within AutoCAD there is a small library of standard three-dimensional objects and surfaces that can be called upon to generate more complex forms. However, to further facilitate the architectural design process, an extended library of innovative structural forms would allow the professional designer, or student, greater design freedom and any increase in the palette of structural forms available should stimulate creativity. As practical examples, the paper describes how students have been encouraged to experiment with the use of structures which can only be physically modelled with difficulty and which are also difficult to represent on the two- dimensional surface of the drawing board unless the geometry has previously been determined by the methods described. These are (i) Reciprocal Frame three-dimensional beam grillage structures and (ii) plate domes created from lattice structures by point-to- plane duality. The problem, of representation of these structures has been overcome, in the first case, by generating AutoLISP procedures to draw the complex three-dimensional geometrical form automatically in AutoCAD and, in the second case, by the development of the computer program CADual.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	08fc
authors	Darken, R.P. and Sibert, J.L.
year	1993
title	A toolset for navigation in virtual environments
source	Proceedings of the ACM User Interface Software and Technology, pp.157-165
summary	Maintaining knowledge of current position and orientation is frequently a problem for people in virtual environments. In this paper we present a toolset of techniques based on principles of navigation derived from real world analogs. We include a discussion of human and avian navigation behaviors and show how knowledge about them were used to design our tools. We also summarize an informal study we performed to determine how our tools influenced the subjects' navigation behavior. We conclude that principles extracted from real world navigation aids such as maps can be seen to apply in virtual environments.
series	other
last changed	2003/04/23 15:14

_id	cbfe
authors	Dave, Bharat
year	1993
title	CDT: A Computer-Assisted Diagramming Tool
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 91-109
summary	This paper describes the development of a computer- based diagramming tool (CDT) that supports incremental structuring of problem information using diagrammatic representations. Diagrams as graphic representations of symbolic propositions allow tentative reasoning and inferencing. The development of CDT has been carried out based on two observations. First, many diagrams are used to represent objects and relations between them. Second, diagrams comprise graphic Symbols arranged on a plane using topological and geometric relations to denote problem relevant information. CDT responds to these needs by incorporating a number of computational ideas: graphic interface, direct manipulation, constraint representation by demonstration, and specification and satisfaction of diagram composition rules.
keywords	Tentative Reasoning, Incremental Problem Representation and Exploration, Diagramming
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	6c55
authors	Dosti, P., Linzer, H. Martens, B. and Voigt, A.
year	1993
title	Multimedia for Environmental Simulation - Framework of Research
doi	https://doi.org/10.52842/conf.ecaade.1993.x.e4g
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Nature as complete entity having existed before us, having produced us, of which we are a part of and which reaches far beyond us and our knowledge stands both for productivity and product, for stones, earth, water, air, plants, animals, human beings, for energy as such. On account of his activity and his intellectual powers and faculties the human being represents the center of this interrelation comprising his vital space, being perceived by him either consciously or unconsciously, the structure and formation of which he changes, which in turn, however, significantly codetermines his behavior and also his development. Spatial effect analysis and spatial impact analysis take the cross- linked interrelations of nature into account and thus the correlated diverse interactions by means of integral representation, determine the direct and indirect as well as the immediate and mediate decisions as to space and furnish us with decision-conclusions by means of modifications. Based on the all-in-all outlook encompassing nature- mankind-space spatial impact also means in particular compatibility within systems giving due regard to the factor time. The following topics are treated within the framework of research: (1.) Elaboration of a methodical framework regarding research and development in the field of multimedia-implementation for environmental planning. (2.) Preparative work concerning implementation areas of multimedia focussing on urban & regional planning and architecture. (3.) Planning process and planning levels,furthermore in the fields of information and decision process and accompanying verification. (4.) Optimizing interaction of multimedia and environmental simulation. (5.) Definition of research- and development-requirements as far as subject-specific and EDP-technical aspects are concerned. (6.) Structurizing of projects regarding realization of framework of research.
series	eCAADe
email
more	http://www.tuwien.ac.at/
last changed	2022/06/07 07:50

_id	db3b
authors	Faugeras, O.
year	1993
title	Three-dimensional computer vision, a geometric viewpoint
source	MIT press
summary	This monograph by one of the world's leading vision researchers provides a thorough, mathematically rigorous exposition of a broad and vital area in computer vision: the problems and techniques related to three-dimensional (stereo) vision and motion. The emphasis is on using geometry to solve problems in stereo and motion, with examples from navigation and object recognition.
series	other
last changed	2003/04/23 15:14

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	5df5
authors	Fournier, A., Gunawan, A. and Romanzin, C.
year	1993
title	Common Illumination between Real and Computer Generated Scenes
source	Proceedings Graphics Interface '93, pp. 254-262, 1993
summary	The ability to merge a real video image (RVI) with a computer- generated image (CGI) enhances the usefulness of both. To go beyond "cut and paste" and chroma-keying, and merge the two images successfully, one must solve the problems of common viewing parameters, common visibility and common illumination. The result can be dubbed Computer Augmented Reality (CAR). We present in this paper techniques for approximating the common global illumination for RVIs and CGIs, assuming some elements of the scene geometry of the real world and common viewing parameters are known. Since the real image is a projection of the exact solution for the global illumination in the real world (done by nature), we approximate the global illumination of the merged image by making the RVI part of the solution to the common global illumination computation. The objects in the real scene are replaced by few boxes covering them; the image intensity of the RVI is used as the initial surface radiosity of the visible part of the boxes; the surface reflectance of the boxes is approximated by subtracting an estimate of the illuminant intensity based on the concept of ambient light; finally global illumination using a classic radiosity computation is used to render the surface of the CGIs with respect to their new environment and for calculating the amount of image intensity correction needed for surfaces of the real image. An example animation testing these techniques has been produced. Most of the geometric problems have been solved in a relatively ad hoc manner. The viewing parameters were extracted by interactive matching of the synthetic scene with the RVIs. The visibility is determined by the relative position of the "blocks" representing the real objects and the computer generated objects, and a moving computer generated light has been inserted. The results of the merging are encouraging, and would be effective for many applications.
series	other
last changed	2003/04/23 15:50

_id	ca14
authors	Gavin, Lesley
year	1993
title	Generative Modelling and Electronic Lego
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q8a
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	This paper shows work exemplifying the further extent of computer capabilities in the field of design. The work stems from a belief that for computers to be used effectively within the architectural profession their utility must stretch far beyond the process of description of geometric data, but be incorporated in the fundamental roots of design: that of conceptual design. Computers can be used to access the knowledge we have and then formulate this knowledge into a working language of design. Computers can be used to generate space and form in accordance with any relationship the designer may choose to set. This allows them to be used from the very conception of design. It is only by working from the very beginning, the very basis of the design of a building that we can fully develop the integration of computers in the construction industry. The work undertaken sets out primarily to explore one of the ways computers could be used in the field of architectural design. In recognition that an important byproduct of any design search is the enhanced understanding of the problem itself, the work was directed towards a particular project. This allowed each stage of thought to be to be considered as it arose and subsequently incorporated into the design model. The work does not attempt to automise the design process but simply tries to explore some of the opportunities offered by computers and see if they can be easily incorporated into the design process offering design solutions that may not otherwise have been considered. The exploration resulted in a simple design process model that incorporates the more accessible and useful aspects of computer technology.
keywords	Generative Modelling, Rule Based Form, Random Factors, Shape Grammars
series	eCAADe
email
last changed	2022/06/07 07:50

_id	e3d3
authors	Gudna , François and Zreik, Khaldoun
year	1993
title	Analogy, Exploration and Generalization: Three Activities for Knowledge-Based Architectural Design Systems
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 255-272
summary	We propose in this article a system architecture based on reasoning through analogy with past cases or situations. Starting with a project and a sketch provided by the user, the system locates analogous situations in the past and uses these to improve a problem's description. A sufficiently improved description will in turn activate a constraint-satisfaction mechanism. Previous situations are stored in a memory bank of objects that match the description of past problems to the generic descriptions of past solutions. Three mechanisms can be distinguished within the system: an analogy mechanism collects hypotheses about the variables and constraints to be satisfied in past situations, an exploratory mechanism searches through the solution space, a generalizing mechanism looks at experiences and memorizes only what is needed to collect hypotheses.
keywords	Knowledge-Based System, Case-Based Reasoning, Constraints Satisfaction, Explanation-Based Learning, Object-Oriented Representation
series	CAAD Futures
last changed	1999/04/07 12:03

_id	2608
authors	Hartman, Jan B.
year	1993
title	Application of Endoscopy in Road–Design
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 109-116
summary	Within the Dutch Ministry of Transport a special Division on Transport and Traffic Research is occupied with all aspects concerning mobility and traffic safety on a national level. Research and advice on the quality of the road–infrastructure is one of the main topics. For road–design a set of very detailed guidelines have been developed. Construction and reconstruction of parts of the high–way–network are tested against these guidelines. In this matter the actual road–user takes a central place. In the design–phase of a project on road-infrastructure contributions of a number of experts are taken into account. Expert–opinions on elements of the road–design result in a overall road–design. The road–scene of the overall–design is tested against visual requirements for safe driving, from a drivers point of view. Goal is to give advice on improvement of the visual quality of the road design. Research in this field is now carried out by Grontmij Consulting Engineers, mainly under authority of the Ministry of Transport. Key–word is Improvement of Quality. Who is going to notice? Who will benefit from it? Of course it is a comforting thought for road–owners and designers to know they won’t have to be ashamed for what they have come up with. Primary goal is that ‘We the people’ are provided with a high–standard road infrastructure. The road–scene research section studies the quality of the visual information as presented to the roadusers. We try to create visual circumstances in which drivers will be able to perform their driving task is a proper way. When the visual representation in the brain differs from reality, you have a serious problem. A traffic safety problem, with casualties and fatalities. A burden for society, financially and emotionally.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	63a9
authors	Hellgardt, Michael
year	1993
title	Architectural Theory and Design Grammars
doi	https://doi.org/10.52842/conf.ecaade.1993.x.i6u
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	The idea of artificial brains and artificial intelligence (AI) has been subject to criticism. The objection of J. Searle, for instance, which has been published in 1984 and which was partially directly addressed to one of the centres of AI, the Carnegie Mellon University in Pittsburgh, is mainly based on two points: (1) interactions between physiological and mental functions, and (2) the intentionality and context-relatedness of meaning. - With an emphasis on architectural design, this paper is about the second point, because the problem of meaning is a neuralgic point in the discussion of "artificial intelligence in design" (AID). Technical parameters are incompatible with mechanisms of meaning in any field of artistic, cultural or non-technical expression. This point, that is the relation between acts of meaning and acts of technical problem-solving and, connectedly, the relation between technological and architectural design, has been widely ignored in the discussion on AID. The development seems to be dominated by the tacit assumption that architecture can be articulated and generated purely in technical and formal terms of information processing beyond the field of architecture itself. Design and shape grammars have become a well established field in the discussion of AID, also with respect to architecture. But questions of architectural history and theory are touched on only incidentally and not sufficiently in this discussion. The problem is not, in other words, simply to include more or less unrelated cases of architecture, or architectural concepts -even if these are famous ones, such as Laugier's original hut for instance but to establish structural relations between arguments of architectural theory and arguments of AID.
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: