Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 254

Reformat results as: short short into frame detailed detailed into frame

_id	d6a3
authors	Alkhoven, Patricia
year	1993
title	The Changing Image of the City
source	University of Utrecht
summary	The image and structure of a town are constantly subject to a dynamic process of change and continuity. Visual material, such as photographs, historical maps, town plans, drawings and prints, show us the impact of these changes on the image of a town. The main point of departure of this study stems from the question of how this process of change and continuity is visually detectable in a town or city. The fact that the ideas about the appearance of a city (gradually) change, can be read from the often subtle changes in the townscape. Though in many cases we have a general knowledge of the choices made in urban management, the most difficult problem is to detect the underlying decisions. This raises the question to what extent these changes and also the continuities are the result of deliberate choices in urban management and to what extent they are autonomous developments in the townscape resistant to interventions. Using different kinds of visual information as a basis, computer visualization techniques are used in the present study to examine some cartographic maps and to reconstruct the urban development in the twentieth century of the town of Heusden three-dimensionally in significant phases. The resulting visualization provides us with a tool for a better understanding of the dynamics of urban transformation processes, typologies and morphological changes and continuities.
keywords	3D City Modeling
series	thesis:PhD
email
more	http://www.library.uu.nl/digiarchief/dip/diss/01754573/hfdheus.htm
last changed	2003/05/15 21:36

_id	2ff9
id	2ff9
authors	Ataman, Osman
year	1993
title	Knowledge-based Stair Design
doi	https://doi.org/10.52842/conf.acadia.1993.163
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 163-171
summary	The application of computer--based technique to support architectural design has often concentrated on matters of representation. Typically, this means computer-aided drafting, and less frequently, computer-aided modeling and visualization. The promise of new computer-based tools to support the process of design has thus far failed to produce any significant tool that has had a widespread impact on the architectural profession. Most developments remain in university based research labs where they are used as teaching instruments in CAD courses or less often in design studios. While there are many reasons for this lack of dissemination, including a reluctance on the part of the architectural profession itself, the primary obstacles deal with difficulties in explicating design knowledge, representing this knowledge in a manner that can be used for design, and providing an intuitive and effective user interface, allowing the designer to easily use the tool for its intended purpose. This study describes a system that has been developed to address a number of these issues. Based on research findings from the field of Artificial Intelligence which expounds on the need for multiple techniques to represent any complex area of knowledge, we have selected a particular approach that focuses on multiple techniques for design representation. We review this approach in depth by considering its many facets necessary when implementing a knowledge-based system. We then partially test the viability of this approach through a small case study, implementing a knowledge-based system for designing stairs. While this effort only deals with a small part of the total design process, it does explore a number of significant issues facing the development of computer-based design assistants, and suggests several techniques for addressing these concerns.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	25de
authors	Ervamaa, Pekka
year	1993
title	Integrated Visualization
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 157-160
summary	The Video and Multimedia studio at VTT, Technical Research Centre of Finland, started with endoscopy photography of scale models. Video recordings has been made since 1985 and computer graphic since 1989. New visualization methods and techniques has been taken into use as a part of research projects, but mainly we have been working with clients commissions only. Theoretical background for the visualizations is strong. Research professor Hilkka Lehtonen has published several papers concerning the theory of visualization in urban planning. This studio is the only professional level video unit at Technical Research Centre, which is a large polytechnic research unit. We produce video tapes for many other research units. All kind of integrated methods of visualization are useful in these video productions, too.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	c1b6
authors	Ries, R.
year	1999
title	Computational Analysis of the Environmental Impact of Building Designs
source	Carnegie Mellon University, Pittsburgh
summary	Concem for the environmental implications of human activities is becoming increasingly important to society. The concept of current development that does not compromise future generations! abilities to meet their needs is a goal for many communities and individuals (WCED 1987). These concerns require the evaluation and assessment of the potential environmental impact of human activities so that informed choices can be made. Building construction and operation activities are of significant importance in view of a) national and intemational economies, 6) resource consumption, c) human occupancy, and d) environmental impact. For example, in the United States the built environment represents an extensive investment, both as an annual expenditure and as an aggregate investment. In the mid-l980’s, up to 30% of new and remodeled buildings had indoor air quality related complaints. Buildings also consume approximately 35% of the primary energy in the U.S. every year, resulting in the release of 482 million metric tons of carbon in 1993.I Methods developed to assess the environmental impact of buildings and development patterns can and have taken multiple strategies. The most straightforward and simple methods use single factors, such as energy use or the mass of pollutant emissions as indicators of environmental performance. Other methods use categorization and weighting strategies. These gauge the effects of the emissions typically based on research studies and use a weighting or effect formulation to normalize, compare, and group emissions so that a scalar value can be assigned to a single or a set of emissions. These methods do not consider the characteristics of the context where the emissions occur.
series	thesis:MSc
email
last changed	2003/02/12 22:37

_id	f4df
id	f4df
authors	Rosenman, M. A., Gero, J. S. and Hwang, Y-S.
year	1993
title	Representation of multiple concepts of a design object based on multiple functions
source	K. Mathur, M. Betts and K. W. Tham (eds), Management of Information Technology for Construction, World Scientific, Singapore, pp. 239-254
summary	Current representatuin schemas for design objects in CAD environments make assumptions regarding particular representations of the design object. In the AEC environemnt, many disciplines are involved, each with its own concept of the design object. Each such concept must be respected and accomodated in any representation. This paper presents the ideas behind the representation of multiple concepts from an underlying description of a design such that the inter and intra-discipline views of that design can be formed dynamically.
keywords	information technology, concewptual modeling, multiple abstraction representation, building design, function
series	other
type	normal paper
email
more	http://www.arch.usyd.edu.au/~john/
last changed	2006/05/27 18:35

_id	ddss9213
id	ddss9213
authors	Shabha, G.S.
year	1993
title	Development of objective methods for measuring flexibility of school buildings
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This research investigates many problems related to the design for change and flexibility of school buildings. The problem of change proves to be highly complex due to the unpredictability and the difficulty of measuring change. Many deficiencies have been identified in the previous methods concerning lack of indicators for measuring flexibility, reliability and insufficiency of data for indicating change in buildings over use. In the light of the above problems, two main objectives have been established: (i) to propose operational measures of the extent of incorporation of design variables in school designs, and (ii) to propose operational measures of the extent of flexibility of school buildings in use. However, due to the limitations this paper is bound to, the investigation will focus on the second objective. It is anticipated that such operational measures might provide a framework for both architects and researchers, during the early design stage, to ensure that their conjectures about the potential of flexibility might be enhanced during use; hence, improving their prediction of buildings performance over use. This might assist in developing a more coherent objective body of knowledge, which could be fruitfully manipulated during the early design stage to enhance the effectiveness of flexibility in use.
series	DDSS
last changed	2003/08/07 16:36

_id	aa7f
authors	Bollinger, Elizabeth and Hill, Pamela
year	1993
title	Virtual Reality: Technology of the Future or Playground of the Cyberpunk?
doi	https://doi.org/10.52842/conf.acadia.1993.121
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 121-129
summary	Jaron Lanier is a major spokesperson of our society's hottest new technology: VR or virtual reality. He expressed his faith in the VR movement in this quote which appears in The User's Guide to the New Edge published by Mondo 2000. In its most technical sense, VR has attracted the attention of politicians in Washington who wonder if yet another technology developed in the United States will find its application across the globe in Asia. In its most human element, an entire "cyberpunk movement" has appealed to young minds everywhere as a seemingly safe form of hallucination. As architecture students, educators, and practitioners around the world are becoming attracted to the possibilities of VR technology as an extension of 3D modeling, visualization, and animation, it is appropriate to consider an overview of virtual reality. In virtual reality a user encounters a computersimulated environment through the use of a physical interface. The user can interact with the environment to the point of becoming a part of the experience, and the experience becomes reality. Natural and instinctive body movements are translated by the interface into computer commands. The quest for perfection in this human-computer relationship seems to be the essence of virtual reality technology. To begin to capture the essence of virtual reality without first-hand experience, it is helpful to understand two important terms: presence and immersion. The sense of presence can be defined as the degree to which the user feels a part of the actual environment. The more reality the experience provides, the more presence it has. Immersion can be defined as the degree of other simulation a virtual reality interface provides for the viewer. A highly immersive system might provide more than just visual stimuli; for example, it may additionally provide simulated sound and motion, and simultaneously prevent distractions from being present.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	42ab
authors	Dagit, Charles E.
year	1993
title	Establishing Virtual Design Environments in Architectural Practice
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 513-522
summary	This paper attempts to specify the ideal computerized architectural design tool and outlines steps that are being taken to make this ideal a reality. Section 2 offers a user-centered assessment of the way technology is currently implemented in the design professions. Section 3 describes the state-of-the-art in high-end CAAD applications, including computer rendering, walk-through displays, and expert diagnostic sysWins. Section 4 details work in progress at Worldesign, Inc., a virtual worlds systems integration firm, which is developing Virtual Design Environment (VDE) systems.
keywords	Computer-Aided Architectural Design (CAAD), Computer-Aided Engineering (CAE), Virtual Worlds Technology, Visualization, Computer Generated Environments, Computer Modeling, Virtual Reality, Information Systems, Information Design
series	CAAD Futures
last changed	1999/04/07 12:03

_id	ecaade2022_368
id	ecaade2022_368
authors	Das, Avishek, Brunsgaard, Camilla and Madsen, Claus Brondgaard
year	2022
title	Understanding the AR-VR Based Architectural Design Workflow among Selected Danish Architecture Practices
doi	https://doi.org/10.52842/conf.ecaade.2022.1.381
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 381–388
summary	Virtual reality (VR) and augmented reality (AR) have been proposed to be additional architectural design mediums for at least 25 years (Dagit, 1993). Despite rapid technical and technological development, it has not been adopted into architectural design practices as compared to academia and research. Surveys from the American Institute of Architects (AIA) and Royal Institutes of British Architects (RIBA) demonstrate the state of architectural practices; 72% of architects and 65% of architects respectively are not using any kind of virtual, augmented, or mixed reality in their practices(RIBA and Microsoft, 2018; Hampson, 2020). In this paper, the authors investigate the state of practices, issues, challenges, and opportunities of the utilization of virtual, augmented, and mixed realities in six architectural practices in the Danish context. Three of the practices are large architectural practices, one medium-sized practice specializing in institutional, healthcare and cultural architecture, and one firm designing private family houses, kindergartens, daycares and places for people with disability and, one experimental design studio. All these practices have used VR/AR in their projects to various degrees. In recent years Danish architectural practices have been involved in various VR/AR-based exhibitions, demonstrations, and tool developments to promote the usage of the same in design practice. Through a set of qualitative interviews with personnel from key architectural practices, the authors would like to demonstrate the present state of practices. The investigation explores the usage of VR and AR in Danish architecture practices by identifying challenges and opportunities regarding skill levels, architectural typology, use cases, toolchains, and workflow and shows similarities and differences between traditional and VR-based design processes. The main findings show how VR/AR-based visualization helps architects to perceive spatiality and also ushers creativity through immersion and overlays.
keywords	Virtual Reality, Augmented Reality, Architectural Design Practice, Denmark
series	eCAADe
email
last changed	2024/04/22 07:10

_id	2a5e
authors	Does, J. van der and Giró, H.
year	1997
title	Design communication and image processing
source	Architectural and Urban Simulation Techniques in Research and Education [Proceedings of the 3rd European Architectural Endoscopy Association Conference / ISBN 90-407-1669-2]
summary	In the proceedings of the first EAEA conference, 1993, I mentioned our first study focused on refining endoscopic video images of a detailed architectural model and drawings. The study was based on work with 900 subjects, of which 200 were professional architects. It has led to a number of technical improvements. In the second study we compared computer-aided design techniques with two techniques from the first study, endoscopic video recordings and coloured and black and white elevations and perspective drawings. Four different groups of 50 subjects took part in this research. We found that computer images are invariably judged to be of moderate value, while drawings yielded consistently high scores. Endoscopic video recordings of the scale model received high scores as far as emotional response is concerned, and moderate scores when the participants were questioned on the actual content of the recordings.
keywords	Architectural Endoscopy, Endoscopy, Simulation, Visualisation, Visualization, Real Environments
series	EAEA
email
more	http://www.bk.tudelft.nl/media/eaea/eaea97.html
last changed	2005/09/09 10:43

_id	sigradi2009_615
id	sigradi2009_615
authors	Eliseo, Maria Amelia; Beatriz de Almeida Pacheco; Fábio Silva Lopes; Ismar Frango Silveira
year	2009
title	Visualização imersiva do patrimônio histórico: Ummodelo espaço-temporal para o campus Mackenzie-Itambé [Immersed visualization of the historical patrimony. A time and space model for the Mackenzie-Itambé campus]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	The cluster of centenary buildings which form part of Mackenzie Presbyterian University Campus in the city of Sao Paulo, Brazil, stands as a perfect example of urban site where these conditions are found. This group of buildings is protected by CONDEPHAAT (Sao Paulo’s Council for the Protection of Historical, Artistic, Archaeological and Touristic Heritage) in 1993. In the group, one building stands as a landmark, Mackenzie Building. Its construction begun in 1894 and it was erected for the establishment of Brazil’s first Engineering School, formerly named Mackenzie Engineering School.This study aims the presentation of the work in progress preparation of a Digital Quadridimensional Model linked to a database, intended to generate a historical and documental framework for the “Preservation Degree 1” buildings at the university campus
keywords	Realidade Virtual; patrimônio histórico; modelo tridimensional
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	ee85
authors	Fox, C. William
year	1993
title	An Interactive Urban Database
doi	https://doi.org/10.52842/conf.acadia.1993.069
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 69-75
summary	This paper describes a development process and mechanism for transmitting academic research and information to the community and the profession, and attempts to examine the effect of the information on the community. It is about my recent work with students on the design and development of a prototype interactive electronic document for archiving and visualizing information on an urban area. The work reflects the initial phase of a three year research grant and is a prototype document of a pilot area. The design and visualization of information for this area will establish the primary organization and graphic user interface, for the entire project. The final document will provide community organizations and city agencies with an interactive tool for visualizing and evaluating neighborhood planning and design proposals.
series	ACADIA
last changed	2022/06/07 07:51

_id	4203
authors	Fraser, Michael
year	1993
title	Boundary Representation in Practice
doi	https://doi.org/10.52842/conf.acadia.1993.173
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 173-185
summary	There is an essential contradiction between the making of buildings or built environments in a threedimensional modeler and the graphic control of this process. Three-dimensional modeling is a constructive activity, in which solids are assembled as they would be in an actual structure; it benefits the designer. Presentation and documentation, on the other hand, are prescriptive activities that direct some of the construction and all the visualization and criticism of the proposal; they benefit the user and builder. A building while being designed can be visualized and criticized from its solid model, and the model can take a variety of forms depending on its part): computer-based, drawn in orthographic or perspective projection, constructed of cardboard or wood, or described narratively by means of text, programmatic data, performance model or animation. However, practicing architecture is the process of recording and communicating the decision making process and the contractual obligations that result. In actual practice, in contrast to the designer directed ideal, more participants are brought in sooner at the beginning of a project and with more publicity, which in turn means keeping more, not fewer, records. As the profession evolves, records of the string of design decisions will become more automated, more carefully structured and more retrievable. More buildings will be "tracked" and exposed to review in this way because public environmental sensitivity will improve. The communication between a single designer and his own thoughts will become less and less important.
series	ACADIA
last changed	2022/06/07 07:50

_id	c32f
authors	Grant, Mike
year	1993
title	Issue - Interactive Software Systems for the Urban Environment
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 557-564
summary	The research reported here sought to examine the prospect for linking data sets which are currently isolated within specific departments or held externally by utility companies or businesses each of whom are likely to benefit from pooling resources. These data sets are potentially capable of being merged into one comprehensive system with the prospect that the sum of the parts would be worth considerably more than their individual worth suggests.
keywords	Computer-Aided Architectural Design, Urban Management Visualization, Geographical Information Systems
series	CAAD Futures
last changed	1999/11/23 19:40

_id	cfd2
authors	Penttilä, Hannu
year	1993
title	Visualizing with Digital Tools - Endoscopy Versus Computer Modeling
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 161-166
summary	This approach sees traditional video endoscopy and computer-based modeling techniques as two methods whose combination gives advantages for both. Endoscopy and computer based tools are not alternative nor rival techniques. New digital visualization possibilities are available within the context of CAD- systems. High-end and more expensive visualization has gained influence from commercial advertizing and also from entertainment industry. Traditional endoscope video has longer historical background and it’s roots are in model photography, model-based simulations and video techniques. The main focus of this paper is to describe Tampere architectural department’s computer based visualization facilities briefly with two cases studies. Our status and resources in traditional simulation have been rather good since mid 70’s, and now when also the basic digital facilities (word processing & CAD) exist, it will be our next challenge to deepen and develop the variety of available simulation methods, equipment – and naturally knowledge in combining them.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	0de6
authors	Robertson, G.G., Card, S.K. and Mackinlay, J.D.
year	1993
title	Information visualization using 3D interactive animation
source	Communications of the ACM 36(4): 57-7 1
summary	UI innovations are often driven by a combination of technology advances and application demands. On the technology side, advances in interactive computer graphics hardware, coupled with low-cost mass storage, have created new possibilities for information retrieval systems in which UIs could play a more central role. On the application side, increasing masses of information confronting a business or an individual have created a demand for information management applications. In the 1980s, text-editing forced the shaping of the desktop metaphor and the now standard GUI paradigm. In the 1990s, it is likely that information access will be a primary force in shaping the successor to the desktop metapho. This article presents an experimental system, the Information Visualizer (see figure 1), which explores a UI paradigm that goes beyond the desktop metaphor to exploit the emerging generation of graphical personal computers and to support the emerging application demand to retrieve, store, manipulate, and understand large amounts of infromation. The basic problem is how to utilize advancing graphics technology to lower the cost of finding information and accessing it once found (the information's "cost structure"). We take four broad strategies: making the user's immediate workspace larger, enabling user interaction with multiple agents, increasing the real-time interaction rate between user and system, and using visual abstraction to shift information to the perceptual system to speed information assimilation and retrieval.
series	journal paper
last changed	2003/04/23 15:14

_id	cc06
authors	Siitonen, Petri
year	1993
title	Future of Endoscopy
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 181-184
summary	Is there any future for endoscopy in environmental visualization? We all are astounded by the rapid development of computer graphics and its’ various applications in environmental visualization. The issue is, can computer graphics live up to all expectations in realtime visualization and can present endoscopy technology be developed to meet the challenge? What are the possibilities to combine the two techniques? The above in mind we started a project at the Faculty of Architecture in the Helsinki University of Technology. First we took a critical look at the current state of computer graphics concerning realtime environmental visualization. Second we studied the current use of endoscopes in association with The Department of Architecture in the University of Tampere and formed a concept for a ”second generation” endoscope. The spreadsheet in the following page is an abbreviation of our studies. As you may notice the endoscopes currently in use couldn’t get some of the +-answers I have marked down here. The endoscope technology referred here is from the coming endoscope of the Helsinki University of Technology.
keywords	Architectural Endoscopy
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea/
last changed	2006/12/26 07:39

_id	fc80
authors	Ubbelohde, S. and Humann, C.
year	1998
title	Comparative Evaluation of Four Daylighting Software Programs
source	1998 ACEEE Summer Study on Energy Efficiency in Buildings Proceedings. American Council for an Energy-Efficient Economy
summary	By the mid-1980's, a number of software packages were under development to predict daylighting performance in buildings, in particular illumination levels in daylighted spaces. An evaluation in 1988 by Ubbelohde et al. demonstrated that none of the software then available was capable of predicting the simplest of real daylighting designs. In the last ten years computer capabilities have evolved rapidly and we have four major packages widely available in the United States. This paper presents a comparative evaluation from the perspective of building and daylighting design practice. A contemporary building completed in 1993 was used as a base case for evaluation. We present the results from field measurements, software predictions and physical modeling as a basis for discussing the capabilities of the software packages in architectural design practice. We found the current software packages far more powerful and nuanced in their ability to predict daylight than previously. Some can accurately predict quantitative daylight performance under varying sky conditions and produce handsome and accurate visualizations of the space. The programs differ significantly, however, in their ease of use, modeling basis and the emphasis between quantitative predictions and visualization in the output.
series	other
last changed	2003/04/23 15:50

_id	60f3
authors	Wright, Robert M. and Hoinkes, Rodney M.
year	1993
title	Computational Issues in Urban Design: Developing a Strategy for Solar Impact Assessment
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 543-555
summary	A comprehensive method for identifying the impacts on solar access of large scale architectural projects still continues to be an important and controversial area in city planning and urban design. Previous research studies such as the Sun Wind and Pedestrian Comfort, a study of Toronto's Central Area, demonstrated approaches possible when dealing with solar issues related to urban design. Existing techniques for solar inventory, analysis and evaluation, while effective, are often dependent on single event analysis (shadow casting) or manual procedures that are time consuming and exceedingly complex especially when needed for day-to-day use by planners or architects involved in complex urban projects. The Centre for Landscape Research has undertaken as part of its research to develop a computational approach that would help city urban designers evaluate and represent the issues of solar access in an urban setting. This paper will outline a series of computational methods developed to utilize an existing municipal digital data base and to describe complex issues of solar access in terms of urban form and context. A technique will be described that quantitatively assesses the total solar potential of a site as compared to changes in solar access due to different urban design proposals. Two-, three- and four-dimensional representation techniques are developed to facilitate understanding of the analysis to users such as city officials, the public, developers, etc.
keywords	Solar Assessment, Urban Design, Open Space, Modeling Visualization
series	CAAD Futures
last changed	1999/04/07 12:03

For more results click below: