Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 239

Reformat results as: short short into frame detailed detailed into frame

_id	8077
authors	Shapira, A., Boyer, L.T. and Najem, Z.H.
year	1993
title	Decision support system for air base construction operations
source	The Int. Journal of Construction IT 1(2), pp. 69-82
summary	The United States Air Force has recently introduced a CAD software performing air base planning and operability functions. This paper presents a prototype system developed to support that software in enhancing decision-making processes for construction operations, by integrating its CAD/graphics capabilities with a database management system (DBMS). The system addresses the complexity and unique nature of the air base environment and takes due account of the importance of the efficient utilization of resources. It assists in the generation of alternative solutions and furnishes comparative and indicative evaluations of these, thus providing the decision maker with proper guidance towards the expeditious selection of good solution. System fundamentals and the rationale behind them are described. A typical scenario is presented, illustrating the concepts developed and demonstrating the potential benefits of the system as a practical decision-support tool. Although originally aimed for an air base environment, the proposed solution could also readily apply to civilian systems of similar characteristics.
series	journal paper
last changed	2003/05/15 21:45

_id	ddss9202
id	ddss9202
authors	Koutamanis, A. and Mitossi, V.
year	1993
title	Architectural computer vision: Automated recognition of architectural drawings
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Computer vision offers the ability to transform digitized drawings into documents that can be used with computer systems. Recognition of digitized drawings can occur at the levels of (a) geometric elements, (b) building elements, and (c) spatial articulation. The last two levels apply not only to digitized images but also to computer-produced ones. The enormous burden placed on the user for inputting and manipulating CAD drawings suggests that automated recognition can add to the capabilities of CAD by making the computer more flexible with respect to inputting design information and more responsive to the actual concerns of the designer.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9208
id	ddss9208
authors	Lucardie, G.L.
year	1993
title	A functional approach to realizing decision support systems in technical regulation management for design and construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Technical building standards defining the quality of buildings, building products, building materials and building processes aim to provide acceptable levels of safety, health, usefulness and energy consumption. However, the logical consistency between these goals and the set of regulations produced to achieve them is often hard to identify. Not only the large quantities of highly complex and frequently changing building regulations to be met, but also the variety of user demands and the steadily increasing technical information on (new) materials, products and buildings have produced a very complex set of knowledge and data that should be taken into account when handling technical building regulations. Integrating knowledge technology and database technology is an important step towards managing the complexity of technical regulations. Generally, two strategies can be followed to integrate knowledge and database technology. The main emphasis of the first strategy is on transferring data structures and processing techniques from one field of research to another. The second approach is concerned exclusively with the semantic structure of what is contained in the data-based or knowledge-based system. The aim of this paper is to show that the second or knowledge-level approach, in particular the theory of functional classifications, is more fundamental and more fruitful. It permits a goal-directed rationalized strategy towards analysis, use and application of regulations. Therefore, it enables the reconstruction of (deep) models of regulations, objects and of users accounting for the flexibility and dynamics that are responsible for the complexity of technical regulations. Finally, at the systems level, the theory supports an effective development of a new class of rational Decision Support Systems (DSS), which should reduce the complexity of technical regulations and restore the logical consistency between the goals of technical regulations and the technical regulations themselves.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup9613
id	ddssup9613
authors	Kulkarni, R.G., Stought, R.R. and Haynes, K.E.
year	1996
title	Traffic Flow Landscapes
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Major metropolitan areas and constituent independent jurisdictions face the problem of providing efficient transportation for their residents and in-and out commuters. A typical trip taker spends considerable time on the road to reach the workplace and other destinations. Though it may seem counter-intuitive, adding more links to existing road networks and/or increasing traffic capacity by adding lanes does not necessarily decrease travel times (eg. Braess' paradox). But it is certain that a dense redundant network of roads would provide a trip taker with alternate routes when traffic incidents occur. These types of questions raise the question of, how to evaluate the flow characteristics of the entire road network of a jurisdiction and its larger region in keeping the traffic moving? Further, how may the impact of adding more links/ lanes or the blocking of existing links! lanes be best measured? To answer these and related questions, we propose a methodology to evaluate a fitness criteria for road networks based on Kauffman's biological NK model (1993). We specify a transportation road traffic flow landscape analogous to the fitness landscape of the NK model. Using the transportation road traffic flow landscape we derive a road fitness index that can be used to evaluate either the entire road network's traffic flows or subparts of such network's traffic flows. We explore the possibility of investigating traffic flow landscapes to search for optimal routes to clear traffic. Finally we describe an approach for applying the theoretical framework developed in the paper to the traffic conditions on the road network of the city of Fairfax, Virginia.
keywords	Fitness Landscapes, NK Model, Genotype, Gene, Self-Organization, ITS Technology
series	DDSS
last changed	2003/08/07 16:36

_id	6c55
authors	Dosti, P., Linzer, H. Martens, B. and Voigt, A.
year	1993
title	Multimedia for Environmental Simulation - Framework of Research
doi	https://doi.org/10.52842/conf.ecaade.1993.x.e4g
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Nature as complete entity having existed before us, having produced us, of which we are a part of and which reaches far beyond us and our knowledge stands both for productivity and product, for stones, earth, water, air, plants, animals, human beings, for energy as such. On account of his activity and his intellectual powers and faculties the human being represents the center of this interrelation comprising his vital space, being perceived by him either consciously or unconsciously, the structure and formation of which he changes, which in turn, however, significantly codetermines his behavior and also his development. Spatial effect analysis and spatial impact analysis take the cross- linked interrelations of nature into account and thus the correlated diverse interactions by means of integral representation, determine the direct and indirect as well as the immediate and mediate decisions as to space and furnish us with decision-conclusions by means of modifications. Based on the all-in-all outlook encompassing nature- mankind-space spatial impact also means in particular compatibility within systems giving due regard to the factor time. The following topics are treated within the framework of research: (1.) Elaboration of a methodical framework regarding research and development in the field of multimedia-implementation for environmental planning. (2.) Preparative work concerning implementation areas of multimedia focussing on urban & regional planning and architecture. (3.) Planning process and planning levels,furthermore in the fields of information and decision process and accompanying verification. (4.) Optimizing interaction of multimedia and environmental simulation. (5.) Definition of research- and development-requirements as far as subject-specific and EDP-technical aspects are concerned. (6.) Structurizing of projects regarding realization of framework of research.
series	eCAADe
email
more	http://www.tuwien.ac.at/
last changed	2022/06/07 07:50

_id	ddss9426
id	ddss9426
authors	Duijvestein, Kees
year	1994
title	Integrated Design and Sustainable Building
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In the international student-project "European Environmental Campus 91 TU Delft Dordrecht" 20 students from 13 European countries worked in september 1991, during three weeks on "EcologicalSketches for the Island of Dordrecht". They worked on four different scales: the region isle of Dordt / the district Stadspolders / the neighbourhood I the house and the block. The environmentaltheme's Energy, Water, Traffic & Noise, Landscape & Soil were together with spatial analyses combined with the different scales. This combination was organised following the scheme mentioned below. The characters stand for the students. During the first period they worked in research groups, during the last period more in design groups. For instance: student L works in the beginning with the students B, G and Q in the research group water. In the last period sheworks with K, M, N and 0 in the design group Neighbourhood. Those students worked earlier in the other research-groups and contribute now in the design-group their thematic environmental knowledge. The results were presented to the Dordrecht council, officials and press. In the next project in september and october 1993 we started earlier with the design groups. Ten Dutch and ten "Erasmus" students worked for six weeks on proposals for the Vinex location Wateringenthe Hague. Each morning they worked in the research groups each afternoon in the design groups. The research groups used the EcoDesign Tools, small applications in Excel on Apple Macintoshto quantify the environmental pressure.
series	DDSS
last changed	2003/08/07 16:36

_id	09b4
authors	Ismail, Ashraf and McCartney, Kevin
year	1993
title	A Tool for Conceptual Design Evaluation Based on Compliance with Site-Development Briefs and Related Planning Regulations
doi	https://doi.org/10.52842/conf.ecaade.1993.x.c6i
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	The need has been established for a computer based decision support tool to use during the conceptual stages of architectural design. The main functions are to check design compliance with the requirements of local planning authorities; characteristics evaluated will include building size, height, plot ratios, circulation and accessibility, and the preservation of natural features on site. This tool is being developed to operate under AutoCAD environment; the construction industry standard computer aided design software, following standard layering convention, integrated command lines, and pull-down menus. In addition to the common graphical output; i.c. plans, elevations and three dimensional models, it will generate textual analysis in report format to use as part of the Environmental Impact Analysis of proposed development. The tool's functions will be based upon the result of two types of field studies. First, interviews and questionnaires will be carried out with architects and planners of both private and public sectors. These will cover issues related to the performance of Computer Aided Architectural Design applications with regard to the evaluation of design schematics, and decision-making for the production of data for environmental statements. Second, field observation and participation will be carried out to observe decision-makers behaviour during assessment of building design proposals. A prototype is currently under development and will be tested against the expectations of the tool designer, Ashraf Ismail, and a team of professionals to be involved in the field studies. A critical analysis of the prototype design methodology and the study findings will be documented in the research thesis to be presented in June 1995.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9217
id	ddss9217
authors	Kim, Y.S. and Brawne, M.
year	1993
title	An approach to evaluating exhibition spaces in art galleries
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	There are certain building types in which movement of people is the most significant evaluation factor. Among these are art galleries and museums. Unlike other building types, which are often explicated by investigating the relationship between people and people, and between people and the built environment, art galleries and museums are a building type in which the social relationship between people hardly exists and peoples movement through space, that is, the functional relationship between people and space, is one of the most significant factors for their description. The typical museum experience is through direct, sequential, and visual contact with static objects on display as the visitor moves. Therefore, the movement pattern of the visitors must exert a significant influence on achieving the specific goal of a museum. There is a critical need for predicting the consequences of particular spatial configurations with respect to visitors movement. In this sense, it is the intention of this paper to find out the relationship between the spatial configuration of exhibition space and the visitors' movement pattern.
series	DDSS
last changed	2003/08/07 16:36

_id	4a5f
authors	Liu, Yu-Tung
year	1993
title	Recognizing Emergent Subshapes in Design Problem Solving: A Connectionist Investigation
doi	https://doi.org/10.52842/conf.acadia.1993.131
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 131-139
summary	Human problem-solving behavior has been modelled as a search through the space as defined as problem states, within which earlier states move to subsequent ones by applying rules in the human mind until the goal state is found. This cognitive model of problem-solving has been broadly accepted and has become dominant in both cognitive psychology and artificial intelligence (AI). In the field of computeraided architectural design (CAAD), search models are also widely used for solving design problems, although various foci of design knowledge are differently represented by shape grammars, graphs, and knowledge-based systems using predicate logic for different purports. In design search, design evolves from one state to another by exhaustively or heuristically applying proper rules. Each rule application involves, first, pattern-matching the antecedent of a rule to the current state and, second, transforming the matched portion of that state into the consequence of the rule. However pattern-matching techniques of current CAAD systems are still limited. In current CAAD systems, only those two squares can be dealt with by patternmatching for further development. However, a human designer can effortlessly recognize not only those two but other emergent subshapes, for example a smaller square in the middle where the two squares overlap and two L-shapes in the corners. Therefore a human designer can thoroughly deliberate all these alternatives before making a decision. In other words, human designer is capable of restructuring shapes in terms of emergent subshapes in any step of designing.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	69b3
authors	Markelin, Antero
year	1993
title	Efficiency of Model Endoscopic Simulation - An Experimental Research at the University of Stuttgart
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 31-34
summary	At the Institute of Urban Planning at the University of Stuttgart early experiments were made with the help of endoscopes in the late 1970’s. The intention was to find new instruments to visualize urban design projects. The first experiment included the use of a 16 mm film of a 1:170 scale model of the market place at Karlsruhe, including design alternatives (with trees, without trees etc). The film was shown to the Karlsruhe authorities, who had to make the decision about the alternatives. It was said, that the film gave a great help for the decision-making and a design proposition had never before been presented in such understandable way. In 1975-77, with the support of the Deutsche Forschungsgemeinschaft (German Research Foundation) an investigation was carried out into existing endoscopic simulation facilities, such as those in Wageningen, Lund and Berkeley. The resulting publication was mainly concerned with technical installations and their applications. However a key question remained: ”Can reality be simulated with endoscopy?” In 1979-82, in order to answer that question, at the Institute was carried out the most extensive research of the time, into the validity of endoscopic simulation. Of special importance was the inclusion of social scientists and psychologists from the University of Heidelberg and Mannheim. A report was produced in 1983. The research was concerned with the theory of model simulation, its ways of use and its users, and then the establishment of requirements for effective model simulation. For the main research work with models or simulation films, psychological tests were developed which enabled a tested person to give accurate responses or evidence without getting involved in alien technical terminology. It was also thought that the use of semantic differentials would make the work imprecise or arbitrary.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	0f50
authors	Skauge, Jørn
year	1993
title	An Electronic Tool for Urban Design Analysis
doi	https://doi.org/10.52842/conf.acadia.1993.077
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 77-85
summary	Architects and urban designers are increasingly using computers in their attempt to improve decision making in urban design. Most existing systems emphasize hard data such as statistics, land use data, etc. In recent years with the use of more powerful computers we have seen a greater emphasis on managing visual data. Computer systems are being used to generate urban models and simulations of the various kinds of impact new developments have on the existing cityscape. This project emphasizes the use of visual data. The purpose of the research has been to develop a computer system for urban designers to use in analyzing urban architectural qualities. Therefore this project focuses on applying traditional methods and theories of urban designers rather than developing new computer techniques. The traditional methods and theories of urban designers fall within the category which the French theorist Francoise Choay calls Pre-urbanism and Urbanism - the Cultural Model. Theorists within this category include Camillo Sitte, Gordon Cullen, Kevin Lynch, Leon Krier, Aldo Rossi, Michael Trieb, Roger Tranzick and Thiis-Evensen. This computer system has been developed as a prototype in order to gain experience and knowledge for future development of a large system. Later development will be based upon a vectorized threedimensional model of a whole city using texture mapping and tracing techniques to annotate important architectural features. The computer system consists of the basic analysis module supplied with a simulation unit and a theory unit. With this analytical tool, analysis is conducted on three different urban scales. The prototype has been developed on the Macintosh computer with SuperCard as the authoring tool. The computer system was developed as a prototype for Danish Urban Designers and is currently being tested in conjunction with the city of Viborg, Denmark. ( population 55,000). Located in Jutland, Viborg was the capital of Denmark around the year 1000. It now functions as a center for regional government. Viborg was selected as the test site because of its historical core.
series	ACADIA
last changed	2022/06/07 07:56

_id	ddss9214
id	ddss9214
authors	Friedman, A.
year	1993
title	A decision-making process for choice of a flexible internal partition option in multi-unit housing using decision theory techniques
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Recent demographic changes have increased the heterogeneity of user groups in the North American housing market. Smaller households (e.g. elderly, single parent) have non-traditional spatial requirements that cannot be accommodated within the conventional house layout. This has created renewed interest in Demountable/Flexible internal partition systems. However, the process by which designers decide which project or user groups are most suited for the use of these systems is quite often complex, non-linear, uncertain and dynamic, since the decisions involve natural processes and human values that are apparently random. The anonymity of users when mass housing projects are conceptualized, and the uncertainty as to the alternative to be selected by the user, given his/her constantly changing needs, are some contributing factors to this effect. Decision Theory techniques, not commonly used by architects, can facilitate the decision-making process through a systematic evaluation of alternatives by means of quantitative methods in order to reduce uncertainty in probabilistic events or in cases when data is insufficient. The author used Decision Theory in the selection of flexible partition systems. The study involved a multi-unit, privately initiated housing project in Montreal, Canada, where real site conditions and costs were used. In this paper, the author outlines the fundamentals of Decision Theory and demonstrates the use of Expected Monetary Value and Weighted Objective Analysis methods and their outcomes in the design of a Montreal housing project. The study showed that Decision Theory can be used as an effective tool in housing design once the designer knows how to collect basic data.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9216
id	ddss9216
authors	Winteraeken-Bruls, P.W.M.
year	1993
title	ROP: An interactive spatial optimization and grouping computer application
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	As a part of a research project at Eindhoven University of Technology, the computer application ROP for space-planning problems was tested in practice. The use of the application in a real-world project was evaluated. The decision-making process for the development of alternatives for a courthouse was observed to see how the computer application could support decision-making. The aim of this paper is to describe the performance of ROP in a real-world setting. ROP appears to be a useful instrument in decision-making for space-planning problems. Especially in the early stages of the design process, it enhances insight among all participants in a project team. It can also be used in situations where little information is available. To conclude, ROP appears to enhance communi-cation between members of a design team.
series	DDSS
last changed	2003/08/07 16:36

_id	3653
authors	Alshawi, M. and Budeiri, M.J.
year	1993
title	An Integrated approach for 3D simulation of construction sequence
source	The Int. Journal of Construction IT 1(2), pp. 35-46
summary	In order to eliminate design-related problems and to ease planning difficulties, a new integrated approach is required to manage and present design and construction information. This paper examines the feasibility of integrating design and construction scheduling information produced by 'industry standard' software. It describes the structure of a prototype which has been developed to generate a 3D simulation model for the construction sequence by integrating a CAD package with a project planning software. This study aims at establishing an integrated approach to communicate construction planning graphically to users (designers or construction managers) prior to construction in order to enhance the efficiency of the design/construction process.
series	journal paper
last changed	2003/05/15 21:45

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	855a
authors	Liew, B.K., Mathur, K., Tan, C.L., Tham, H.C., Teh, H.C., Loe, K.F., Heah, K.L.
year	1993
title	PARADISE: An Intelligent CAD System architecture
source	The Int. Journal of Construction IT 1(3), pp.1-24
summary	This paper presents the architecture of an intelligent CAD system called PARADISE. The motivation is in addressing the lack in architectural computing that has to do with intelligent assistance of design at the early stages. A schema for representing and integrating design knowledge and graphical data called the Design Model (DM) is presented. Following which, work done in developing the CAD-based front end of PARADISE called the graphic subsystem (PGS) is described. The emphasis is at providing tools which facilitate the creation and manipulation of form and spaces at early design stages. We then describe the functionalities of our geometric reasoner (PGS) is described. The geometric reasoner is responsible for all reasoning between the syntax of design drawings and its related semantics. We highlight, in particular, the reasoning of implicit spaces.
series	journal paper
last changed	2003/05/15 21:45

_id	4dd6
authors	Bhavnani, S.K., Garrett, J. and Shaw, D.S.
year	1993
title	Leading Indicators of CAD Experience
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 313-334
summary	Current interfaces and help facilities of CAD systems are not designed to respond to a user's performance. To develop such adaptive environments, a better understanding of the indicators of CAD experience is required. This paper discusses the results of studying behavior patterns of different types and levels of CAD users for a specific drawing task. The results show that the type and experience of the CAD user has a clear correlation to the pattern of commands used, the time taken, and the quality of drawing produced. By using the experimental data to train a neural network, the paper demonstrates a connectionist approach for experience assessment. This information, it is proposed, can provide input to an adaptive interface which generates unobtrusive interception to improve the performance of a CAD user. Future experiments to explore the issues of generality and interception are presented.
keywords	CAD user Modeling, Adaptive Interface, Neural Networks
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	a336
authors	Calvo, Charles M.
year	1993
title	SOME EPISTEMOLOGICAL CONCERNS REGARDING ARTIFICIAL INTELLIGENCE AND KNOWLEDGE-BASED APPROACHES TO ARCHITECTURAL DESIGN - A RENEWED AGENDA
doi	https://doi.org/10.52842/conf.acadia.1993.155
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 155-162
summary	It has been noted that designers - when confronted with computers - have, by and large, refused to accept the introduction of apparently new design methodologies, and it has been speculated that this is the result of a failure of those methodologies to address the cognitive processes which take place in the course of designing. This position is somewhat suspect in that such innovations as computer-aided drafting -which also fail to recognize these processes have been widely accepted. It is perhaps more likely that the lack of acceptance results from a perception on the part of designers that the new methodologies either do not reflect some or all of those concerns that designers consider fundamental to design, or that they actively interfere with the designer's ability to accomplish what he/she sees as the goals of design. Given that the application of artificial intelligence and related work to architecture is still in its infancy, all of this suggests the need for a reassessment of the role of computing in design in order to clarify and strengthen those roles deemed appropriate. Two approaches to the integration of artificial intelligence and knowledge-based systems into architectural design practice are currently dominant. One attempts to create systems which can on their own produce designs, the other provides intelligent support for those doing design. It was, in part, the recognition of limitations in the ability of traditional CAD systems and building modelers to reflect what designers actually do that led to explorations into the idea of intelligent assistants. Development of such assistants was aided by research into the act and process of design through protocol and other studies. Although some work is currently being done in the development of artificial intelligence and knowledge based applications in architecture, and work continues to be done on the study of design methodologies, the bulk of available information in each of these areas remains in the realm of design disciplines related to but outside of architecture and do not reflect the explicit role of architectural design in the embodiment and expression of culture. The relationship of intelligence to culture has resulted in some skepticism regarding the ultimate capacity of neural nets and symbolically programmed computers in general. Significant work has been done questioning the rational tradition in computer development for its failure to address phenomena which are not easily subject to scientific analysis. Further skepticism regarding the role of artificial intelligence and knowledge-based or expert systems in architectural design has been emerging recently. Such criticism tends to focus on two issues: the nature of drawing as an activity which involves both the generation and interpretation of graphic artifacts, and the nature of the human designer as an active agent in the design process.
series	ACADIA
type	normal paper
last changed	2022/06/07 07:54

_id	3a06
authors	Shaw, D.S., Yang, D., Garrett, J.H. and Bhavnani, S.K.
year	1993
title	Identifying CAD Objects and Behaviors as a Means of Adapting to Designers
source	Proceedings of the 21st Annual Conference on Computer Science, CSC'93 (1993) 278-283
summary	Human beings learn to communicate through mutual eflorts to develop shared understandings within a given context. With neural network technology, computers may learn to identify objects and behaviors in the CAD context by which they may “understand” the needs of designers. This capability can enable the computer to respond adaptively to assist individual users.
series	other
email
last changed	2003/06/09 09:31

_id	86dc
authors	Aouad, G., and Price, A.D.F.
year	1993
title	An integrated system to aid the planning of concrete structures: introducing the system
source	The Int. Journal of Construction IT1(2), pp.1-14
summary	This paper reports on the development at Loughborough University of a CAD-based integrated model to aid the planning of in-situ concrete structures. The system development started after a review of the planning models currently available and after a detailed questionnaire survey undertaken amongst the top UK and US contractors on the current status of planning techniques and information technology. The main aim of this system is to automate the planning process of in-situ concrete structures using data generated by CAD systems. So far, the integration of a CAD system (AutoCAD 10) and a computerized scheduling system (Artemis 2000) has been achieved on a typical IBM-PC. This enables the generation of network plans using AutoCAD which are then automatically transferred to the Artemis system for time and cost analyses.Traditionally, construction planners are faced with many conventional drawings and documents which are used to re-extract information relevant to their planning processes. Such an approach can be very inefficient as it involves data double-handling and is often error prone. In addition, current computerized construction planning applications are little more than the automation of manual formulations of plans. For example, data are fed into the planning system and computations are performed using either CPM (Critical Path Method) or PERT (Programme Evaluation and Review Technique). However, data relating to the planning process such as activity lists, resources requirements and durations are not automatically generated within the system. It would thus seem logical to devise a CAD-based integrated planning model which accepts data in its electronic format and involves some integration of the traditional planning approach. This paper introduces the proposed CAD-based integrated planning model and describes its different components. In addition, it discusses the system functional specifications and summarizes the main benefits and limitations of such a model.
series	journal paper
last changed	2003/05/15 21:45

For more results click below: