Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 256

Reformat results as: short short into frame detailed detailed into frame

_id	0b24
authors	Chilton, J.C., Wester, T. and Yu, J.
year	1993
title	Exploring Structural Morphology Using CAD
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.d1k
summary	Often in the design process the student's imagination is restricted by their inability to visualise, model or accurately sketch ideas for innovative structural systems. By using CAD as a design tool it is possible to explore the morphology of complex structures and to be able to produce perspective drawings of them with relative ease. Within AutoCAD there is a small library of standard three-dimensional objects and surfaces that can be called upon to generate more complex forms. However, to further facilitate the architectural design process, an extended library of innovative structural forms would allow the professional designer, or student, greater design freedom and any increase in the palette of structural forms available should stimulate creativity. As practical examples, the paper describes how students have been encouraged to experiment with the use of structures which can only be physically modelled with difficulty and which are also difficult to represent on the two- dimensional surface of the drawing board unless the geometry has previously been determined by the methods described. These are (i) Reciprocal Frame three-dimensional beam grillage structures and (ii) plate domes created from lattice structures by point-to- plane duality. The problem, of representation of these structures has been overcome, in the first case, by generating AutoLISP procedures to draw the complex three-dimensional geometrical form automatically in AutoCAD and, in the second case, by the development of the computer program CADual.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	5df5
authors	Fournier, A., Gunawan, A. and Romanzin, C.
year	1993
title	Common Illumination between Real and Computer Generated Scenes
source	Proceedings Graphics Interface '93, pp. 254-262, 1993
summary	The ability to merge a real video image (RVI) with a computer- generated image (CGI) enhances the usefulness of both. To go beyond "cut and paste" and chroma-keying, and merge the two images successfully, one must solve the problems of common viewing parameters, common visibility and common illumination. The result can be dubbed Computer Augmented Reality (CAR). We present in this paper techniques for approximating the common global illumination for RVIs and CGIs, assuming some elements of the scene geometry of the real world and common viewing parameters are known. Since the real image is a projection of the exact solution for the global illumination in the real world (done by nature), we approximate the global illumination of the merged image by making the RVI part of the solution to the common global illumination computation. The objects in the real scene are replaced by few boxes covering them; the image intensity of the RVI is used as the initial surface radiosity of the visible part of the boxes; the surface reflectance of the boxes is approximated by subtracting an estimate of the illuminant intensity based on the concept of ambient light; finally global illumination using a classic radiosity computation is used to render the surface of the CGIs with respect to their new environment and for calculating the amount of image intensity correction needed for surfaces of the real image. An example animation testing these techniques has been produced. Most of the geometric problems have been solved in a relatively ad hoc manner. The viewing parameters were extracted by interactive matching of the synthetic scene with the RVIs. The visibility is determined by the relative position of the "blocks" representing the real objects and the computer generated objects, and a moving computer generated light has been inserted. The results of the merging are encouraging, and would be effective for many applications.
series	other
last changed	2003/04/23 15:50

_id	578d
authors	Helpenstein, H. (Ed.)
year	1993
title	CAD geometry data exchange using STEP
source	Berlin: Springer-Verlag
summary	With increasing demand for data exchange in computer integrated manufacturing, a neutral connection between dissimilar systems is needed. After a few national and European attempts, a worldwide standardization of product data has been developed. Standard ISO 10303 (STEP - STandard for Exchange of Product data) produced in its first version those parts that are relevant for CAD geometrical data. A European consortium of 14 CAD vendors and users was supported by the ESPRIT programme to influence the emerging standard and implement early applications for it. Over the years 1989-1992, project CADEX (CAD geometry data EXchange) worked out application protocols as a contribution to STEP; developed a software toolkit that reads, writes, and manipulates STEP data; and, based on this toolkit, implemented data exchange processors for ten different CAD and FEA systems. This book reports the work done in project CADEX and describes all its results in detail.
series	other
last changed	2003/04/23 15:14

_id	8402
authors	Martens, Bob (Ed.)
year	1995
title	The Future of Endoscopy
source	[Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4] Vienna (Austria), 30 August - 1 September 1995, 144p.
summary	The first EAEA-Conference took place at Tampere University of Technology (Finland, 1993) serving as an meeting point for specialists of endoscopy in architecture and displayed an approach to the potentials of endoscopy. The Vienna Conference in 1995 continued this direction and tried furthermore to serve as a platform for non-advanced users. EAEA '95 Vienna aimed at a critical investigation of today's endoscopic culture. The Aspern-Workshop represented the highlight of this conference. Prior to the conference nine universities had submitted endoscopic and computer-assisted space simulations for this urban expansion area north of the Vienna Danube. The outcome was not to be regarded as a “noble competition” between the various institutions participating, but rather to sound out the actual potential of various simulation techniques and their combinations for future use. The conference proceedings contain the papers presented at the meeting by 23 experts from 15 universities. The papers cover such areas as the technical features of endoscopy and environmental simulation, theories supporting the use of endoscopy, practical applications, and discussions on the future of endoscopy and environmental simulation in comparison with other means of architectural representation.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	612c
authors	Madrazo, Leandro
year	1998
title	Computers and Architectural Design: Going Beyond the Tool
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 44-57
doi	https://doi.org/10.52842/conf.acadia.1998.044
summary	More often than not, discussions taking place in specialised conferences dealing with computers and design tend to focus mostly on the tool itself. What the computer can do that other tools cannot, how computers might improve design and whether a new aesthetic would result from the computer; these are among the most recurrent issues addressed in those forums. But, by placing the instrument at the center of the debate, we might be distorting the nature of design. In the course KEYWORDS, carried out in the years 1992 and 1993 at the ETH Zurich, the goal was to transcend the discourses that concentrate on the computer, integrating it in a wider theoretical framework including principles of modern art and architecture. This paper presents a summary of the content and results of this course.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	80b9
authors	Madrazo, Leandro
year	2000
title	Computers and architectural design: going beyond the tool
source	Automation in Construction 9 (1) (2000) pp. 5-17
summary	More often than not, discussions taking place in specialised conferences dealing with computers and design tend to focus mostly on the tool itself. What the computer can do that other tools cannot, how computers might improve design and whether a new aesthetic would result from the computer; these are among the most recurrent issues addressed in those forums. But, by placing the instrument at the center of the debate, we might be distorting the nature of design.In the course KEYWORDS, carried out in the years 1992 and 1993 at the ETH Zurich, the goal was to transcend the discourses that concentrate on the computer, integrating it in a wider theoretical framework including principles of modern art and architecture. This paper presents a summary of the content and results of this course.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	2006_252
id	2006_252
authors	Penttilä, Hannu
year	2006
title	Managing the Changes within the Architectural Practice - The Effects of Information and Communication Technology (ICT)
source	Communicating Space(s) [24th eCAADe Conference Proceedings / ISBN 0-9541183-5-9] Volos (Greece) 6-9 September 2006, pp. 252-260
doi	https://doi.org/10.52842/conf.ecaade.2006.252
summary	The architectural working environment has changed during the last 30 years more than ever before. Most of the changes have been related with information and communication technologies (ICT). Architectural working methods and tools have changed profoundly, when CAD has replaced more traditional methods and tools. Communicative working environment and document management within design & construction has also been changed to digital, meaning email and project webs. Completing a traditional architectural profile of the 20th centrury, a drawer-designer, contemporary communicating and managing skills plus mastering ICT are needed today to operate modern architectural practise properly. The objective of this study is to create a change-oriented understanding of the contemporary architectural profession concentrating on architectural information management. The first phase, a literature study, will be followed by interviews and case-studies, to examine three hypothetically different periods of time: a) 1980-85 the era before CAD, the last days of hand-drawing, b) 1993-98 the era of digital drawing, the expansion of architectural CAD, c) 2000-05 the rise of integrated and pervasive web-supported digital design. The study will propose new aspects to be included in the modern architectural profile, namingly project coordination, collaborative team-work, design information integration and profound digital content management.
keywords	architectural profession; design practice; architectural ICT; change management
series	eCAADe
email
last changed	2022/06/07 08:00

_id	22bc
authors	Randle, Jay
year	1993
title	Light and Form: A Case Study
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 21-38
doi	https://doi.org/10.52842/conf.acadia.1993.021
summary	The first great consideration in design is that the human world is irreducibly phenomenal; we are immersed in the overwhelming richness and sensuousness of the physical environment. And the first great task of design education is to put the student of design into a disciplined awareness of that phenomenal world, by development of categories of discrimination. The introductory experiences bring the student into vivid contact with compelling phenomena. The associated exercises structure and differentiate perception of nuance within these. There is little doubt that texture, surface, extension, value, and color are in one sense basic categories of physical phenomena, constituting in essence a fundamental stratum of experience and the sensible world. Modern psychology and epistemology, however, cohere in saying that this stratum is not the sense world of everyday, the primary datum of the functioning societal member. Neither is the abstract world of the physicist's concepts an everyday world. What is given in our day-to-day life is neither very abstract, nor very concrete, but a sort of functionally-bound middle world of norms and stereotypes. It takes the disciplined seeing characteristic of foundational training in the arts to drive this bourgeois view of physical reality back to elemental sense data. Just as it requires the supremely abstract language of mathematics and the rarified "experience" of modern scientific experimentation to drive that same view offcenter in the direction of abstraction. The first exercises of a program of design education begin to perform the former role.
series	ACADIA
last changed	2022/06/07 08:00

_id	e4c3
authors	Saggio, Antonino
year	1993
title	Hypertext, Solid Modeling, and Hierarchical Structures in Formal Architectural Analysis
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 289-309
summary	The paper presents computer reconstructions of unbuilt projects relevant to the history of Italian rationalism together with the potential and limits of three CAAD environments. While an evaluation is provided for each one, a more detailed attention is devoted to hierarchical structures because of their capability to capture knowledge, to support further investigations, and to provide new insights into architecture. A model built in this environment allows simultaneously (1) the analysis and reconstruction even of a complex project at the size of a personal computer; (2) the simulation and test of different material, crucial in the case of restoration or in the case of incomplete and uncertain original project data; (3) the critical analysis (but also the co-presence of the different project alternatives of design phases) through the reading at the various level of the hierarchy; and (4) free investigation on the structure of data that can support new critical hypothesis and insights that were not anticipated at the moment of project creation.
keywords	Hypertext, Solid Modeling, Hierarchical Structures, Giuseppe Terragni, Italian Modern Architecture
series	CAAD Futures
last changed	1999/04/07 12:03

_id	db3b
authors	Faugeras, O.
year	1993
title	Three-dimensional computer vision, a geometric viewpoint
source	MIT press
summary	This monograph by one of the world's leading vision researchers provides a thorough, mathematically rigorous exposition of a broad and vital area in computer vision: the problems and techniques related to three-dimensional (stereo) vision and motion. The emphasis is on using geometry to solve problems in stereo and motion, with examples from navigation and object recognition.
series	other
last changed	2003/04/23 15:14

_id	af46
authors	Lue, Q.
year	1993
title	Computer aided descriptive geometry
source	Vienna University of Technology
summary	The main aim of this thesis is the creation of a software package for descriptive geometry. Why there is a need for such a descriptive geometry software? In descriptive geometry the ability of space perception is trained by solving spatial problems graphically with the use of a few constructions: Hence the solution of each problem consists of two parts: 1) 3D-part: After analyzing the spatial problem it is cleared how to proceed step by step in space. 2) 2D-part: Due to the basic rules of descriptive geometry for each step of the solving strategy the corresponding 2D-construction has to be carried out graphically. By use of CAD-DG the 2nd part can be replaced again by a 3D-part: Each step is solved using the basic routines offered in the menu. That means that each step is solved analytically but instead of any output of numbers the solution is immediately displayed in the main views on the screen. Therefore the user neither needs to apply formulas of analytic geometry nor has to take care of any coordinates. He still works directly with geometric objects in a graphic representation
keywords	Descriptive Geometry; Computer Graphics; Education; Interactive Graphic Software Package; Programming Technique; Educational Software
series	thesis:PhD
more	http://www.arcs.ac.at/dissdb/rn020701
last changed	2003/02/12 22:37

_id	ecaade2014_153
id	ecaade2014_153
authors	David Morton
year	2014
title	Augmented Reality in architectural studio learning:How Augmented Reality can be used as an exploratory tool in the design learning journey
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 343-356
doi	https://doi.org/10.52842/conf.ecaade.2014.1.343
wos	WOS:000361384700034
summary	The boundaries of augmented reality in the academic field are now being explored at an ever increasing level. In this paper we present the initial findings of an educational project focusing on the use of augmented reality in the design process of an architectural student. The study seeks to evaluate the use of AR as a tool in the design stages, allowing effective exploration of spatial qualities of design projects undertaken in the studio. The learning process is guided by the exploration and detection of a design idea in both form and function, with the virtual environment providing a dynamic environment (Mantovani, 2001). This is further reflected in the constructivist theory where the learning processes use conceptual models, which are used to create incremental stages that become the platform to attain the next [Winn, 1993]. The additional benefit of augmented reality within the learning journey is the ability of the students to visually explore the architectural forms they are creating in greater depth.
keywords	Augmented reality; pedagogy; learning journey; exploration
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2014_146
id	ecaade2014_146
authors	Davide Ventura and Matteo Baldassari
year	2014
title	Grow: Generative Responsive Object for Web-based design - Methodology for generative design and interactive prototyping
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 587-594
doi	https://doi.org/10.52842/conf.ecaade.2014.2.587
wos	WOS:000361385100061
summary	This paper is part of the research on Generative Design and is inspired by the ideas spread by the following paradigms: the Internet of Things (Auto-ID Center, 1999) and the Pervasive/Ubiquitous Computing (Weiser, 1993). Particularly, the research describes a number of case studies and, in detail, the experimental prototype of an interactive-design object: “Grow-1”. The general assumptions of the study are as follows: a) Developing the experimental prototype of a smart-design object (Figure 1) in terms of interaction with man, with regard to the specific conditions of the indoor environment as well as in relation to the internet/web platforms. b) Setting up a project research based on the principles of Generative Design.c) Formulating and adopting a methodology where computational design techniques and interactive prototyping ones converge, in line with the principles spread by the new paradigms like the Internet of Things.
keywords	Responsive environments and smart spaces; ubiquitous pervasive computing; internet of things; generative design; parametric modelling
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ddss9206
id	ddss9206
authors	Drach, A., Langenegger, M. and Heitz, S.
year	1993
title	Working with prototypes: from cad to flexible tools for integrated building design
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The formulation of design knowledge as concepts, goals and rules cannot be captured in fixed and valid statements. The dynamic modelling of concepts and goals is, on the contrary, part of the design process itself. Tools that effectively support architects in their design should therefore never use predefined mechanisms, but must be definable interactively according to design specifications. We propose the concept of prototypes as a cognitive model to represent and structure design knowledge. Prototypes incorporate an individual view of design in a synthetic and organizational model for a defined area of interest. They actively control and guide design processes in supporting the organizational concepts for solutions. The a+Tool implements these concepts on the basis of a modelling language. It provides a dynamic toolkit and user interface to support design as well as knowledge modelling.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9207
id	ddss9207
authors	Gauchel, J., Hovestadt, L., van Wyk, S. and Bhat, R.R.
year	1993
title	Modular building models
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The development and implementation of a modular building model appropriate for computer aided design is described. The limitations of a unified building model with regard to concurrence and complexity in design is discussed. Current research suggests that to model real-world complexity, one must trade centralized control for autonomy. In this paper we develop a modular approach to building modelling that is based on object-oriented autonomy and makes it possible to define these models in a distributed concurrent manner. Such a modular and autonomous implementation brings inherent uncertainty and conflict which cannot be determined a priori.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9217
id	ddss9217
authors	Kim, Y.S. and Brawne, M.
year	1993
title	An approach to evaluating exhibition spaces in art galleries
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	There are certain building types in which movement of people is the most significant evaluation factor. Among these are art galleries and museums. Unlike other building types, which are often explicated by investigating the relationship between people and people, and between people and the built environment, art galleries and museums are a building type in which the social relationship between people hardly exists and peoples movement through space, that is, the functional relationship between people and space, is one of the most significant factors for their description. The typical museum experience is through direct, sequential, and visual contact with static objects on display as the visitor moves. Therefore, the movement pattern of the visitors must exert a significant influence on achieving the specific goal of a museum. There is a critical need for predicting the consequences of particular spatial configurations with respect to visitors movement. In this sense, it is the intention of this paper to find out the relationship between the spatial configuration of exhibition space and the visitors' movement pattern.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9202
id	ddss9202
authors	Koutamanis, A. and Mitossi, V.
year	1993
title	Architectural computer vision: Automated recognition of architectural drawings
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Computer vision offers the ability to transform digitized drawings into documents that can be used with computer systems. Recognition of digitized drawings can occur at the levels of (a) geometric elements, (b) building elements, and (c) spatial articulation. The last two levels apply not only to digitized images but also to computer-produced ones. The enormous burden placed on the user for inputting and manipulating CAD drawings suggests that automated recognition can add to the capabilities of CAD by making the computer more flexible with respect to inputting design information and more responsive to the actual concerns of the designer.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup9613
id	ddssup9613
authors	Kulkarni, R.G., Stought, R.R. and Haynes, K.E.
year	1996
title	Traffic Flow Landscapes
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Major metropolitan areas and constituent independent jurisdictions face the problem of providing efficient transportation for their residents and in-and out commuters. A typical trip taker spends considerable time on the road to reach the workplace and other destinations. Though it may seem counter-intuitive, adding more links to existing road networks and/or increasing traffic capacity by adding lanes does not necessarily decrease travel times (eg. Braess' paradox). But it is certain that a dense redundant network of roads would provide a trip taker with alternate routes when traffic incidents occur. These types of questions raise the question of, how to evaluate the flow characteristics of the entire road network of a jurisdiction and its larger region in keeping the traffic moving? Further, how may the impact of adding more links/ lanes or the blocking of existing links! lanes be best measured? To answer these and related questions, we propose a methodology to evaluate a fitness criteria for road networks based on Kauffman's biological NK model (1993). We specify a transportation road traffic flow landscape analogous to the fitness landscape of the NK model. Using the transportation road traffic flow landscape we derive a road fitness index that can be used to evaluate either the entire road network's traffic flows or subparts of such network's traffic flows. We explore the possibility of investigating traffic flow landscapes to search for optimal routes to clear traffic. Finally we describe an approach for applying the theoretical framework developed in the paper to the traffic conditions on the road network of the city of Fairfax, Virginia.
keywords	Fitness Landscapes, NK Model, Genotype, Gene, Self-Organization, ITS Technology
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9208
id	ddss9208
authors	Lucardie, G.L.
year	1993
title	A functional approach to realizing decision support systems in technical regulation management for design and construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Technical building standards defining the quality of buildings, building products, building materials and building processes aim to provide acceptable levels of safety, health, usefulness and energy consumption. However, the logical consistency between these goals and the set of regulations produced to achieve them is often hard to identify. Not only the large quantities of highly complex and frequently changing building regulations to be met, but also the variety of user demands and the steadily increasing technical information on (new) materials, products and buildings have produced a very complex set of knowledge and data that should be taken into account when handling technical building regulations. Integrating knowledge technology and database technology is an important step towards managing the complexity of technical regulations. Generally, two strategies can be followed to integrate knowledge and database technology. The main emphasis of the first strategy is on transferring data structures and processing techniques from one field of research to another. The second approach is concerned exclusively with the semantic structure of what is contained in the data-based or knowledge-based system. The aim of this paper is to show that the second or knowledge-level approach, in particular the theory of functional classifications, is more fundamental and more fruitful. It permits a goal-directed rationalized strategy towards analysis, use and application of regulations. Therefore, it enables the reconstruction of (deep) models of regulations, objects and of users accounting for the flexibility and dynamics that are responsible for the complexity of technical regulations. Finally, at the systems level, the theory supports an effective development of a new class of rational Decision Support Systems (DSS), which should reduce the complexity of technical regulations and restore the logical consistency between the goals of technical regulations and the technical regulations themselves.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9215
id	ddss9215
authors	Mortola, E. and Giangrande, A.
year	1993
title	A trichotomic segmentation procedure to evaluate projects in architecture
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper illustrates a model used to construct the evaluation module for An Interface for Designing (AID), a system to aid architectural design. The model can be used at the end of every cycle of analysis-synthesis-evaluation in the intermediate phases of design development. With the aid of the model it is possible to evaluate the quality of a project in overall terms to establish whether the project is acceptable, whether it should be elaborated ex-novo, or whether it is necessary to begin a new cycle to improve it. In this last case, it is also possible to evaluate the effectiveness of the possible actions and strategies for improvement. The model is based on a procedure of trichotomic segmentation, developed with MCDA (Multi-Criteria Decision Aid), which uses the outranking relation to compare the project with some evaluation profiles taken as projects of reference. An application of the model in the teaching field will also be described.
series	DDSS
last changed	2003/08/07 16:36

For more results click below: