Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 252

Reformat results as: short short into frame detailed detailed into frame

_id	4980
authors	Flemming, Ulrich and Mahdavi, Ardeshir
year	1993
title	Simultaneous Form Generation and Performance Evaluation: A "Two-Way" Inference Approach
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 161-173
summary	The conventional approach toward performance evaluation transforms given design attributes into performance indicators, and designers can improve these indicators only indirectly through the manipulation of design attributes. This paper outlines a contrasting "two-way " inference approach that allows designers to also manipulate the performance indicators directly and observe the resulting changes in design attributes. The advantages of this approach and its limitations are outlined. Methodological and implementation difficulties that arise from it are introduced, and possible solution strategies are described. A first prototype for a system that implements and demonstrates this approach is outlined. The larger debate about 'functionalism " touched by this approach, and its response to it, are briefly reviewed.
keywords	Form Generation, Performance Evaluation, Form-Function Mapping, Two-Way Approach
series	CAAD Futures
email
last changed	2003/02/26 17:26

_id	a150
authors	Mahdavi, Ardeshir
year	1993
title	Open Simulation Environments: A “Preference-Based” Approach
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 195-214
summary	This paper introduces in conceptual, algorithmic and implementation terms, the notion of an "open" simulation environment as a "multidirectional" approach to computer-aided performance modelling. A "preference- based" formalization of design intentions/criteria is proposed to cope with the "ambiguity" problem through dynamic control of degrees of freedom of relevant design-related parameters during the interactive design process. A prototypical realization of an open simulation environment called "GESTALT' for simultaneous treatment (parametric manipulation) of various design and performance variables is demonstrated. Some preliminary results of computer-assisted generation of performance-responsive designs are presented.
keywords	Open Simulation Environments, Multidirectional Building Performance Simulation, Form-Function Mapping, Preference-Based Convergence Strategies, Preference-Index
series	CAAD Futures
email
last changed	2003/02/26 17:26

_id	f485
authors	Kolarevic, Branko Radomir
year	1993
title	Geometric Relations as a Framework For Design Conceptualization
source	Harvard University, Graduate School of Design
summary	This study introduces geometric relations as a framework for design conceptualiza-tion-its key premise is that nothing is more fundamental in design than formation and discovery of relationships. The study attempts to establish a formal model for the development of a dynamic computer based graphic environment for design conceptualization that can recognize, record and maintain geometric design relations, merge "depictive" and "propositional", explicit and implicit in design, and provide a qualitatively different way to explore shape, dimension, and geometric organization. The study presents an approach to this task of formalization, and explores some of the fundamental issues pertinent to the subject, such as computability and applicability to the task of designing.Specifically, the study explores a relational description of shapes based on the concept of regulating or construction lines as an explicit formulation of a strategy to form generation and creative discovery, and proposes a lexicon of geometric relations to serve as a basis for composition. It hypothesizes that the construction lines can become much more useful and interesting when they are used not just as a rigid skeleton, but to regulate the behavior of a drawing and to maintain its essential structure as its parts are manipulated. As a consequence, designers could structure the behavior of the object being designed under future transformations; drawings could become seman-tically charged and could be manipulated in a semantically sophisticated fashion.The first chapter places the issue in the broader context by arguing that designers form implicit relational models of their designs. This contention is supported by introducing some of the relevant literature on mental imagery. Second chapter introduces design relations and in particular geometric relations, as a focal point of this study. A dynamic computer -based graphic context for design conceptualization is presented and evalu-ated in the next two chapters and conclusions are drawn. In the third chapter, the model's computability is demonstrated and evaluated through ReDRAW, a limited implementation of a relations based graphic system. In the fourth chapter, the model's applicability in design conceptualization is discussed and supported by examples.
series	thesis:PhD
email
more	http://www.gsd.harvard.edu/academic/asp/ddes/thesis_titles.html
last changed	2003/02/12 22:37

_id	60f3
authors	Wright, Robert M. and Hoinkes, Rodney M.
year	1993
title	Computational Issues in Urban Design: Developing a Strategy for Solar Impact Assessment
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 543-555
summary	A comprehensive method for identifying the impacts on solar access of large scale architectural projects still continues to be an important and controversial area in city planning and urban design. Previous research studies such as the Sun Wind and Pedestrian Comfort, a study of Toronto's Central Area, demonstrated approaches possible when dealing with solar issues related to urban design. Existing techniques for solar inventory, analysis and evaluation, while effective, are often dependent on single event analysis (shadow casting) or manual procedures that are time consuming and exceedingly complex especially when needed for day-to-day use by planners or architects involved in complex urban projects. The Centre for Landscape Research has undertaken as part of its research to develop a computational approach that would help city urban designers evaluate and represent the issues of solar access in an urban setting. This paper will outline a series of computational methods developed to utilize an existing municipal digital data base and to describe complex issues of solar access in terms of urban form and context. A technique will be described that quantitatively assesses the total solar potential of a site as compared to changes in solar access due to different urban design proposals. Two-, three- and four-dimensional representation techniques are developed to facilitate understanding of the analysis to users such as city officials, the public, developers, etc.
keywords	Solar Assessment, Urban Design, Open Space, Modeling Visualization
series	CAAD Futures
last changed	1999/04/07 12:03

_id	078e
authors	Papazian, Pegor
year	1993
title	Incommensurability of Criteria and Focus in Design Generation
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 111-125
summary	An approach to developing design systems is presented, informed by the recognition that design criteria are incommensurable. The degree to which an artifact satisfies one criterion cannot be compared to the degree to which it satisfies another. Given this principle, it is not valid to combine different "scores " given to independent features in an evolving design into a global evaluation function. The design framework proposed here represents an alternative to the traditional approaches for combining independent criteria and organizational principles. It is based on the opportunistic nature of designing, the multiplicity of semantics active in a design session, and the dynamics of focus and distraction. By way of illustrating both this characterization of designing and the abstract computational framework on which it is based, a simple system for arranging blocks according to a set of formal massing principles is presented. The massing generator has some important properties that other systems lack, such as dynamism, robustness and the ability to deal with partial designs. Through a comparison with some artificial intelligence methods such as production systems and search, the proposed framework is used as a guideline for developing design systems. This paper focuses on designing as an activity, rather than engaging in an analysis of finished designs with the hope of capturing their syntactic properties. Thus the stress is placed on the generator's behavior, by giving examples of how it converges on a series of design alternatives in a dynamic fashion, avoiding oscillations and blocks.
keywords	Design, Criteria, Opportunism, Focus, CAD
series	CAAD Futures
last changed	1999/04/07 12:03

_id	50ce
authors	Baker, R.
year	1993
title	Designing the Future: The Computer Transformation of Reality
source	Thames and Hudson, Hong Kong
summary	A coffee table book on computer applications? Well, yes, because it does deal largely with matters of graphic design in architecture, fashion and textiles, painting, and photography; but it also has items which might be of interest in its sections on digital publication, typography, and electronic communication in general. It also seeks to discuss the way in which these applications may force us to change the way we think. Robin Baker writes in an unfortunately stiff and abstract manner about the impact computer programmes have had on the world of art and design, but the graphic images and extended picture captions help to keep the reader awake - even though the main text sometimes disappears for two or three double page spreads on end. There are also smatterings of pretentious art-world-speak about 'solving certain spatial problems' (in the design of curtain fabrics or teapots) and the introduction (inevitable?) of new jargon: 'shape grammar'(a list of so-called shape 'rules'), 'repurposing' (putting somebody else's work to new use) and 'genetic algorithms' (sculptural designs based on re-processed organic shapes - most of which look like stomach tumours). In his favour, Baker very generously credits students and commercial designers who have produced the effects he describes and illustrates so well. For writers, he sketches in the possibilities of Hypertext and Hypermedia and points to the future of Hyper publishing which he (and Rupert Murdoch)believes will be with us before the end of the century. He seems to have a good oversight of what is possible and practicable - though one wonders how up-to-date the view is when his book may have begun its life anything up to three years ago. He usefully points out that much new technology exists in or drags along with it the forms of earlier periods - so that in an age of electronic communication we still have printed books as a dominant cultural form. Maybe this is as it should be - but Baker makes a persuasive case for the claim that All This is Going to Change.
series	other
last changed	2003/04/23 15:14

_id	c207
authors	Branzell, Arne
year	1993
title	The Studio CTH-A and the Searching Picture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 129-140
summary	What happens during an architect’s search for the best solution? How does he (or she) begin, which tools are chosen, what happens when he comes to a standstill? The activities – sketching, discussions with other people, making models, taking walks to think, visits to the library, etc? What is an ordinary procedure and what is more specific? Do the tools have an impact on the final solution chosen? What happens during periods of no activity? Are they important? In which fields of activities are signs of the searching process to be found? In other words — what is the process of creative thinking for architects? Mikael Hedin and myself at Design Methods, Chalmers University of Technology, have started research into architects’ problem-solving. We have finished a pilot study on a very experienced architect working traditionally, without Cad (”The Bo Cederlöf Case”). We have started preliminary discussions with our second ”Case”, an architect in another situation, who has been working for many years with Cad equipment (Gert Wingårdh). For our next case, we will study a third situation – two or more architects who share the responsibility for the solution and where the searching is a consequence of a dialogue between equal partners. At present, we are preparing a report on theories in and methods for Searching and Creativity. I will give you some results of our work up till now, in the form of ten hypotheses on the searching process. Finally, I would like to present those fields of activity where we have so far found signs of searching. Our approach, in comparison with earlier investigations into searching (the most respected being Arnheim’s study on Picasso’s completion of the Guernica) is to collect and observe signs of searching during the process, not afterwards. We are, to use a metaphor, following in the footsteps of the hunter, recording the path he chooses, what marks he makes, what tools, implements and equipment he uses. For practising architects: a better understanding of what is going on and encouragement to try new ways of searching, for architectural students: better preparation and training for problem solving. It all began while we compared the different objects in our collection of sketches at the Chalmers STUDIO for Visualisation and Communication. (For some years, we have been gathering sketches by Alvar Aalto, Jorn Utzon, Ralph Erskine, Erik and Tore Ahlsén, Lewerenz, Nyrén, Lindroos, Wingårdh and others in a permanent exhibition). We observed similarities in these sketches which allowed us to frame ten hypotheses about the searching process.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	af70
authors	Coates, Paul and Yakeley, Megan
year	1993
title	Function Follows Form: A Description of the Work and Educational Objectives of the MSc in Computing & Design at the University of East London School of Architecture
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.o2g
summary	This paper demonstrates the approach to Architectural education that has been developed over the last 3 years on the MSc Computing & Design course at the University of East London. Although the course deals exclusively in computer based topics, the main concern is primarily with developing a design methodology and a way of teaching design method, more particularly an algorithmic description of form. Rule based design, emergent form and bottom up approaches to design have become fashionable to the point of ubiquity in the last 5 years, but we like to think that only at UEL have these concerns been linked to a consistent view of design.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	e994
id	e994
authors	Gero, J. S.
year	1993
title	The role of visual emergence in collaborative design
source	Computational Support for Distributed Collaborative Design, Key Centre of Design Computing, University of Sydney, pp. 103-115
summary	There are two fundamental approaches to the use of computers to support collaborative design: (i) to use the computer as a device which increases the efficiency of what designers could do previously, and (ii) to use the computer as an active device which allows designers to do what they could not readily do previously. // This paper is concerned with the latter approach by introducing the concept of visual or graphical emergence as one form of collaboration at a distance that can not readily be carried out without the aid of the computer.
series	other
type	normal paper
email
more	http://www.arch.usyd.edu.au/~john/
last changed	2006/05/27 18:21

_id	ddss9218
id	ddss9218
authors	Hensen, J.L.M.
year	1993
title	Design support via simulation of building and plant thermal interaction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Design decision support related to building energy consumption and/or indoor climate should be based on an integral approach to the environment, the building, heating, ventilating and air-conditioning (HVAC) system, and the occupants. The tools to achieve this are now available in the form of computer simulation systems which treat the building and plant as an integrated dynamic system. Although its potentials reach beyond the area of Computer Aided Building Design, the paper describes building and plant energy simulation within the context of CABD, design decision support and design evaluation. Currently, computer simulation is only used indirectly as a design decision support mechanism; that is, its power is not delivered very efficiently to the design profession. This paper suggests some future research directions. These are aimed at providing a mechanism to overcome this problem by developing an intelligent front end' which bridges the gap between sophisticated computer simulation tools and the design profession.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9210
id	ddss9210
authors	Poortman, E.R.
year	1993
title	Ratios for cost control
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The design of buildings takes place in phases representing a development from rough to precision planning. Estimates are made in order to test whether the result is still within the budget set by the client or developer. In this way, the decisions taken during the design phase can be quantified and expressed in monetary terms. To prevent blaming the wrong person when an overrun is discovered, the cost control process has to be improved. For that purpose, two new procedures have been developed: (i) a new translation activity; and (ii) ratios by which quantities can be characterized. 'Translation is the opposite of estimation. A monetary budget is converted -'translated' - into quantities, reflecting the desired quality of the building materials. The financial constraints of the client are thus converted into quantities - the building components used by the designers. Characteristic quantity figures play an important role in this activity. In working out an estimate, the form factor (i.e., the ratio between two characteristic values of a building component) has to be determined. The unit cost is then tested against that ratio. The introduction of the 'translation' activity and the use of characteristic quantity figures and form factors enhance existing estimation methods. By implementing these procedures, cost control becomes considerably more reliable.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9203
id	ddss9203
authors	Smeets, J.
year	1993
title	Housing tenancy, data management and quality control
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	This paper deals with housing tenancy, data management and quality control. The proposed method is focused on quality characteristics of housing estates in view of rentability risks. It entails a cycle of registration, analysis and implementation of measures. The starting point is the behaviour of the housing consumer in a market-oriented context. The model is framed within theories of strategic management and marketing. Systematic registration and evaluation of consumer behaviour, by means of a set of relevant process and product indicators, can yield relevant information in the four phases of the rental process: orientation, intake, dwelling and exit. This information concerns the way in which the dwelling (characterized by product indicators) fits the needs of the consumer. The systematic analysis of the process and product indicators during the phases of the rental process makes a 'strength-weakness analysis' of housing estates possible. The indicators can be presented in aggregated form by way of a 'rentability index. The 'strength-weakness analysis' steers the intervention in the quality characteristics of housing estates. The possibilities for readjustment, however, are different. The quality control system is not only an early warning system, but also has several other functions: evaluation, planning and communication. The method described here lays a solid foundation for a decision-support system in the area of housing tenancy.
series	DDSS
last changed	2003/08/07 16:36

_id	c995
authors	Smets, G., Gaver, W.W., Overbeeke, C. and Stappers, P.
year	1993
title	Designing in Virtual Reality: Perception-Action Coupling and Form Semantics Short Papers (Talks): Visual Languages and Virtual Reality
source	Proceedings of ACM INTERCHI'93 Conference on Human Factors in Computing Systems -- Adjunct Proceedings 1993 pp. 11-12
summary	In this paper, we describe work on a CAD package we are developing for use in virtual reality. Although this research is only preliminary, it demonstrates some advantages of designing in virtual reality. We describe these advantages in terms of ecological approach to perception, focusing on two of the implications of this approach: the role of perception-action coupling in producing true direct manipulation, and the desirability of providing perceptual information about the affordances of objects in the design environment.
keywords	Virtual Reality; Ecological Approaches
series	other
last changed	2002/07/07 16:01

_id	86dc
authors	Aouad, G., and Price, A.D.F.
year	1993
title	An integrated system to aid the planning of concrete structures: introducing the system
source	The Int. Journal of Construction IT1(2), pp.1-14
summary	This paper reports on the development at Loughborough University of a CAD-based integrated model to aid the planning of in-situ concrete structures. The system development started after a review of the planning models currently available and after a detailed questionnaire survey undertaken amongst the top UK and US contractors on the current status of planning techniques and information technology. The main aim of this system is to automate the planning process of in-situ concrete structures using data generated by CAD systems. So far, the integration of a CAD system (AutoCAD 10) and a computerized scheduling system (Artemis 2000) has been achieved on a typical IBM-PC. This enables the generation of network plans using AutoCAD which are then automatically transferred to the Artemis system for time and cost analyses.Traditionally, construction planners are faced with many conventional drawings and documents which are used to re-extract information relevant to their planning processes. Such an approach can be very inefficient as it involves data double-handling and is often error prone. In addition, current computerized construction planning applications are little more than the automation of manual formulations of plans. For example, data are fed into the planning system and computations are performed using either CPM (Critical Path Method) or PERT (Programme Evaluation and Review Technique). However, data relating to the planning process such as activity lists, resources requirements and durations are not automatically generated within the system. It would thus seem logical to devise a CAD-based integrated planning model which accepts data in its electronic format and involves some integration of the traditional planning approach. This paper introduces the proposed CAD-based integrated planning model and describes its different components. In addition, it discusses the system functional specifications and summarizes the main benefits and limitations of such a model.
series	journal paper
last changed	2003/05/15 21:45

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	cecc
authors	Woodbury, Rob and Griffith, Eric
year	1993
title	Layouts, Solids, Grammar Interpreters and Fire Stations
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 75-90
summary	This paper is presented in three main parts. First, it reports the results of an effort to combine two representations (layouts and solid models) within a single generative framework. Second, it describes fire stations as a building type and reports a phased grammar that embodies information about the type and generates fire station designs likely to be members of the type. Third, it describes a useful way of controlling grammatical generation via interactive decisions on rule application, hierarchical decomposition of designs, and ordering of the conflict set of rule instantiations.
keywords	Fire Station, Layout, Generative System, Search, Solid Modeling, Spatial Grammar
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	2864
authors	Isakovic, Tatiana and Fischinger, Matej
year	1993
title	Making Reinforced Concrete Cross-sections Design Easy and Understandable
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.d3r
summary	Modern computing facilities provide an alternative graphical approach to the design of cross-sections. A description of this process might be "strength evaluation", since, for any chosen cross-section, concrete strength, and reinforcement size, location, and yield strength, the flexural resistance (capacity) is defined by the bending moment-axial force interaction diagram. The factored forces are then plotted into the diagram and, by comparing the capacity and demand on the computer screen, the designer can decide about the suitability of the chosen cross-section. If necessary, the cross-sectional properties can be changed easily. There are several advantages of this design approach. The design procedure is fast, clear and economical. For example, all loading combinations for all the columns of the frame in Fig. 1 can be checked simultaneously. The procedure is the same for various shapes of cross-sections and it enables simple reinforcement optimization as well as the typization of cross-sections. For example, only two types of cross-sections can satisfy the design requirements for all the columns in the mentioned frame.
series	eCAADe
last changed	2022/06/07 07:50

_id	09b4
authors	Ismail, Ashraf and McCartney, Kevin
year	1993
title	A Tool for Conceptual Design Evaluation Based on Compliance with Site-Development Briefs and Related Planning Regulations
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.c6i
summary	The need has been established for a computer based decision support tool to use during the conceptual stages of architectural design. The main functions are to check design compliance with the requirements of local planning authorities; characteristics evaluated will include building size, height, plot ratios, circulation and accessibility, and the preservation of natural features on site. This tool is being developed to operate under AutoCAD environment; the construction industry standard computer aided design software, following standard layering convention, integrated command lines, and pull-down menus. In addition to the common graphical output; i.c. plans, elevations and three dimensional models, it will generate textual analysis in report format to use as part of the Environmental Impact Analysis of proposed development. The tool's functions will be based upon the result of two types of field studies. First, interviews and questionnaires will be carried out with architects and planners of both private and public sectors. These will cover issues related to the performance of Computer Aided Architectural Design applications with regard to the evaluation of design schematics, and decision-making for the production of data for environmental statements. Second, field observation and participation will be carried out to observe decision-makers behaviour during assessment of building design proposals. A prototype is currently under development and will be tested against the expectations of the tool designer, Ashraf Ismail, and a team of professionals to be involved in the field studies. A critical analysis of the prototype design methodology and the study findings will be documented in the research thesis to be presented in June 1995.
series	eCAADe
last changed	2022/06/07 07:50

_id	5fdc
authors	Reber, A.S.
year	1993
title	Implicit Learning and Tacit Knowledge: An Essay on the Cognitive Unconscious
source	New York: Oxford University Press
summary	In this new volume in the Oxford Psychology Series, the author presents a highly readable account of the cognitive unconscious, focusing in particular on the problem of implicit learning. Implicit learning is defined as the acquisition of knowledge that takes place independently of the conscious attempts to learn and largely in the absence of explicit knowledge about what was acquired. One of the core assumptions of this argument is that implicit learning is a fundamental, "root" process, one that lies at the very heart of the adaptive behavioral repertoire of every complex organism. The author's goals are to outline the essential features of implicit learning that have emerged from the many studies that have been carried out in a variety of experimental laboratories over the past several decades; to present the various alternative perspectives on this issue that have been proposed by other researchers and to try to accommodate these views with his own; to structure the literature so that it can be seen in the context of standard heuristics of evolutionary biology; to present the material within a functionalist approach and to try to show why the experimental data should be seen as entailing particular epistemological perspectives; and to present implicit processing as encompassing a general and ubiquitous set of operations that have wide currency and several possible applications. Chapter 1 begins with the core problem under consideration in this book, a characterization of "implicit learning" as it has come to be used in the literature. Reber puts this seemingly specialized topic into a general framework and suggests a theoretical model based on standard heuristics of evolutionary biology. In his account, Reber weaves a capsule history of interest in and work on the cognitive unconscious. Chapter 2 turns to a detailed overview of the experimental work on the acquisition of implicit knowledge, which currently is of great interest. Chapter 3 develops the evolutionary model within which one can see learning and cognition as richly intertwining issues and not as two distinct fields with one dominating the other. Finally, Chapter 4 explores a variety of entailments and speculations concerning implicit cognitive processes and their general role in the larger scope of human performance
series	other
last changed	2003/04/23 15:14

_id	bdc5
authors	Lehane, A., Wright, D. and Lambourne, E.
year	1993
title	Parallel Modeling: Addressing the Issues of Creative Designing in CAD Environments II. Special Applications
source	Proceedings of the Fifth International Conference on Human-Computer Interaction 1993 v.1 pp. 249-254
summary	We postulate that Industrial Designers, in general, solve a given problem by generating a series of proposed solutions to that problem, each proposal, in theory, helps the designer to converge on the ideal solution. Any number of solutions may be under continuous development at any one time and any previous solutions should always be available for appraisal and viewing. The single modeling environment provided in traditional Computer Aided Design (CAD) systems does not support this practice. Thus, CAD systems are primarily used to address the final phases of the design process, such as analysis, visualisation and detailing. This is surely not utilising the full potential of such a powerful design tool. In an attempt to develop a less restrictive working practice for CAD users, we consider a parallel modeling approach. This solution allows the simultaneous development, design and review of a number of computer based solutions.
keywords	Paper Based Design Process; Parallel Modeling; Computer Based Design Process; Sets; Industrial Design; Set Theory; Directed Acyclic Graph; Seed
series	other
last changed	2002/07/07 16:01

For more results click below: