Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 256

Reformat results as: short short into frame detailed detailed into frame

_id	2ff9
id	2ff9
authors	Ataman, Osman
year	1993
title	Knowledge-based Stair Design
doi	https://doi.org/10.52842/conf.acadia.1993.163
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 163-171
summary	The application of computer--based technique to support architectural design has often concentrated on matters of representation. Typically, this means computer-aided drafting, and less frequently, computer-aided modeling and visualization. The promise of new computer-based tools to support the process of design has thus far failed to produce any significant tool that has had a widespread impact on the architectural profession. Most developments remain in university based research labs where they are used as teaching instruments in CAD courses or less often in design studios. While there are many reasons for this lack of dissemination, including a reluctance on the part of the architectural profession itself, the primary obstacles deal with difficulties in explicating design knowledge, representing this knowledge in a manner that can be used for design, and providing an intuitive and effective user interface, allowing the designer to easily use the tool for its intended purpose. This study describes a system that has been developed to address a number of these issues. Based on research findings from the field of Artificial Intelligence which expounds on the need for multiple techniques to represent any complex area of knowledge, we have selected a particular approach that focuses on multiple techniques for design representation. We review this approach in depth by considering its many facets necessary when implementing a knowledge-based system. We then partially test the viability of this approach through a small case study, implementing a knowledge-based system for designing stairs. While this effort only deals with a small part of the total design process, it does explore a number of significant issues facing the development of computer-based design assistants, and suggests several techniques for addressing these concerns.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	c5bb
authors	Hirschberg, U., Meister, M. and Neumann, F.
year	1993
title	Processing of Geographic Data for CAAD-supported Analysis and Design of Urban Development Areas
doi	https://doi.org/10.52842/conf.ecaade.1993.x.w2h
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	The interdisciplinary research project aims at the development of a hard- and software environment to support the representation, analysis, manipulation and design of urban development areas for architects and city planners. It was started in 1990 and involves three groups at the ETH Zurich: Architecture/Urban design - Processing of Geographic Data/Photogrammetry -Computer Sciences/CAAD. The first part of this paper will give an introduction to the goals and implications of the project by comparing it with a similar project one of the authors took part in as a student. Then the paper gives a brief description of the work of the three groups involved, an overview of the methods they employed and the results that were achieved. The main focus will be on the work of the CAAD group . Finally some conclusions are drawn and problems are discussed. The future work includes the testing of the tool by students during the winter term 1993/94.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	09b4
authors	Ismail, Ashraf and McCartney, Kevin
year	1993
title	A Tool for Conceptual Design Evaluation Based on Compliance with Site-Development Briefs and Related Planning Regulations
doi	https://doi.org/10.52842/conf.ecaade.1993.x.c6i
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	The need has been established for a computer based decision support tool to use during the conceptual stages of architectural design. The main functions are to check design compliance with the requirements of local planning authorities; characteristics evaluated will include building size, height, plot ratios, circulation and accessibility, and the preservation of natural features on site. This tool is being developed to operate under AutoCAD environment; the construction industry standard computer aided design software, following standard layering convention, integrated command lines, and pull-down menus. In addition to the common graphical output; i.c. plans, elevations and three dimensional models, it will generate textual analysis in report format to use as part of the Environmental Impact Analysis of proposed development. The tool's functions will be based upon the result of two types of field studies. First, interviews and questionnaires will be carried out with architects and planners of both private and public sectors. These will cover issues related to the performance of Computer Aided Architectural Design applications with regard to the evaluation of design schematics, and decision-making for the production of data for environmental statements. Second, field observation and participation will be carried out to observe decision-makers behaviour during assessment of building design proposals. A prototype is currently under development and will be tested against the expectations of the tool designer, Ashraf Ismail, and a team of professionals to be involved in the field studies. A critical analysis of the prototype design methodology and the study findings will be documented in the research thesis to be presented in June 1995.
series	eCAADe
last changed	2022/06/07 07:50

_id	cf2011_p093
id	cf2011_p093
authors	Nguyen, Thi Lan Truc; Tan Beng Kiang
year	2011
title	Understanding Shared Space for Informal Interaction among Geographically Distributed Teams
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 41-54.
summary	In a design project, much creative work is done in teams, thus requires spaces for collaborative works such as conference rooms, project rooms and chill-out areas. These spaces are designed to provide an atmosphere conducive to discussion and communication ranging from formal meetings to informal communication. According to Kraut et al (E.Kraut et al., 1990), informal communication is an important factor for the success of collaboration and is defined as ‚Äúconversations take place at the time, with the participants, and about the topics at hand. It often occurs spontaneously by chance and in face-to-face manner. As shown in many research, much of good and creative ideas originate from impromptu meeting rather than in a formal meeting (Grajewski, 1993, A.Isaacs et al., 1997). Therefore, the places for informal communication are taken into account in workplace design and scattered throughout the building in order to stimulate face-to-face interaction, especially serendipitous communication among different groups across disciplines such as engineering, technology, design and so forth. Nowadays, team members of a project are not confined to people working in one location but are spread widely with geographically distributed collaborations. Being separated by long physical distance, informal interaction by chance is impossible since people are not co-located. In order to maintain the benefit of informal interaction in collaborative works, research endeavor has developed a variety ways to shorten the physical distance and bring people together in one shared space. Technologies to support informal interaction at a distance include video-based technologies, virtual reality technologies, location-based technologies and ubiquitous technologies. These technologies facilitate people to stay aware of other‚Äôs availability in distributed environment and to socialize and interact in a multi-users virtual environment. Each type of applications supports informal interaction through the employed technology characteristics. One of the conditions for promoting frequent and impromptu face-to-face communication is being co-located in one space in which the spatial settings play as catalyst to increase the likelihood for frequent encounter. Therefore, this paper analyses the degree to which sense of shared space is supported by these technical approaches. This analysis helps to identify the trade-off features of each shared space technology and its current problems. A taxonomy of shared space is introduced based on three types of shared space technologies for supporting informal interaction. These types are named as shared physical environments, collaborative virtual environments and mixed reality environments and are ordered increasingly towards the reality of sense of shared space. Based on the problem learnt from other technical approaches and the nature of informal interaction, this paper proposes physical-virtual shared space for supporting intended and opportunistic informal interaction. The shared space will be created by augmenting a 3D collaborative virtual environment (CVE) with real world scene at the virtual world side; and blending the CVE scene to the physical settings at the real world side. Given this, the two spaces are merged into one global structure. With augmented view of the real world, geographically distributed co-workers who populate the 3D CVE are facilitated to encounter and interact with their real world counterparts in a meaningful and natural manner.
keywords	shared space, collaborative virtual environment, informal interaction, intended interaction, opportunistic interaction
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	c1b6
authors	Ries, R.
year	1999
title	Computational Analysis of the Environmental Impact of Building Designs
source	Carnegie Mellon University, Pittsburgh
summary	Concem for the environmental implications of human activities is becoming increasingly important to society. The concept of current development that does not compromise future generations! abilities to meet their needs is a goal for many communities and individuals (WCED 1987). These concerns require the evaluation and assessment of the potential environmental impact of human activities so that informed choices can be made. Building construction and operation activities are of significant importance in view of a) national and intemational economies, 6) resource consumption, c) human occupancy, and d) environmental impact. For example, in the United States the built environment represents an extensive investment, both as an annual expenditure and as an aggregate investment. In the mid-l980’s, up to 30% of new and remodeled buildings had indoor air quality related complaints. Buildings also consume approximately 35% of the primary energy in the U.S. every year, resulting in the release of 482 million metric tons of carbon in 1993.I Methods developed to assess the environmental impact of buildings and development patterns can and have taken multiple strategies. The most straightforward and simple methods use single factors, such as energy use or the mass of pollutant emissions as indicators of environmental performance. Other methods use categorization and weighting strategies. These gauge the effects of the emissions typically based on research studies and use a weighting or effect formulation to normalize, compare, and group emissions so that a scalar value can be assigned to a single or a set of emissions. These methods do not consider the characteristics of the context where the emissions occur.
series	thesis:MSc
email
last changed	2003/02/12 22:37

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	60f3
authors	Wright, Robert M. and Hoinkes, Rodney M.
year	1993
title	Computational Issues in Urban Design: Developing a Strategy for Solar Impact Assessment
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 543-555
summary	A comprehensive method for identifying the impacts on solar access of large scale architectural projects still continues to be an important and controversial area in city planning and urban design. Previous research studies such as the Sun Wind and Pedestrian Comfort, a study of Toronto's Central Area, demonstrated approaches possible when dealing with solar issues related to urban design. Existing techniques for solar inventory, analysis and evaluation, while effective, are often dependent on single event analysis (shadow casting) or manual procedures that are time consuming and exceedingly complex especially when needed for day-to-day use by planners or architects involved in complex urban projects. The Centre for Landscape Research has undertaken as part of its research to develop a computational approach that would help city urban designers evaluate and represent the issues of solar access in an urban setting. This paper will outline a series of computational methods developed to utilize an existing municipal digital data base and to describe complex issues of solar access in terms of urban form and context. A technique will be described that quantitatively assesses the total solar potential of a site as compared to changes in solar access due to different urban design proposals. Two-, three- and four-dimensional representation techniques are developed to facilitate understanding of the analysis to users such as city officials, the public, developers, etc.
keywords	Solar Assessment, Urban Design, Open Space, Modeling Visualization
series	CAAD Futures
last changed	1999/04/07 12:03

_id	ddss9219
id	ddss9219
authors	Bourdakis, V. and Fellows, R.F.
year	1993
title	A model appraising the performance of structural systems used in sports hall and swimming pool buildings in greece
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The selection of the best performing structural system (among steel, timber laminated, concrete, fabric tents) for medium span (30-50m) sports halls and swimming pools in Greece formed the impetus for this research. Decision-making concerning selection of the structural system is difficult in this sector of construction, as was explained in the "Long Span Structures" conference (November 1990, Athens. Greece). From the literature it has been found that most building appraisals end up at the level of data analysis and draw conclusions on the individual aspects they investigate. These approaches usually focus on a fraction of the problem, examining it very deeply and theoretically. Their drawback is loss of comprehensiveness and ability to draw conclusions on an overall level and consequently being applicable to the existing conditions. Research on an inclusive level is sparse. In this particular research project, an inclusive appraisal approach was adopted, leading to the identification of three main variables: resources, human-user-satisfaction, and technical. Consequently, this led to a combination of purely quantitative and qualitative data. Case studies were conducted on existing buildings in order to assess the actual performance of the various alternative structural systems. This paper presents the procedure followed for the identification of the research variables and the focus on the development of the model of quantification. The latter is of vital importance if the problem of incompatibility of data is to be solved, overall relation of findings is to be achieved and holistic conclusions are to be drawn.
series	DDSS
last changed	2003/11/21 15:16

_id	c207
authors	Branzell, Arne
year	1993
title	The Studio CTH-A and the Searching Picture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 129-140
summary	What happens during an architect’s search for the best solution? How does he (or she) begin, which tools are chosen, what happens when he comes to a standstill? The activities – sketching, discussions with other people, making models, taking walks to think, visits to the library, etc? What is an ordinary procedure and what is more specific? Do the tools have an impact on the final solution chosen? What happens during periods of no activity? Are they important? In which fields of activities are signs of the searching process to be found? In other words — what is the process of creative thinking for architects? Mikael Hedin and myself at Design Methods, Chalmers University of Technology, have started research into architects’ problem-solving. We have finished a pilot study on a very experienced architect working traditionally, without Cad (”The Bo Cederlöf Case”). We have started preliminary discussions with our second ”Case”, an architect in another situation, who has been working for many years with Cad equipment (Gert Wingårdh). For our next case, we will study a third situation – two or more architects who share the responsibility for the solution and where the searching is a consequence of a dialogue between equal partners. At present, we are preparing a report on theories in and methods for Searching and Creativity. I will give you some results of our work up till now, in the form of ten hypotheses on the searching process. Finally, I would like to present those fields of activity where we have so far found signs of searching. Our approach, in comparison with earlier investigations into searching (the most respected being Arnheim’s study on Picasso’s completion of the Guernica) is to collect and observe signs of searching during the process, not afterwards. We are, to use a metaphor, following in the footsteps of the hunter, recording the path he chooses, what marks he makes, what tools, implements and equipment he uses. For practising architects: a better understanding of what is going on and encouragement to try new ways of searching, for architectural students: better preparation and training for problem solving. It all began while we compared the different objects in our collection of sketches at the Chalmers STUDIO for Visualisation and Communication. (For some years, we have been gathering sketches by Alvar Aalto, Jorn Utzon, Ralph Erskine, Erik and Tore Ahlsén, Lewerenz, Nyrén, Lindroos, Wingårdh and others in a permanent exhibition). We observed similarities in these sketches which allowed us to frame ten hypotheses about the searching process.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	a336
authors	Calvo, Charles M.
year	1993
title	SOME EPISTEMOLOGICAL CONCERNS REGARDING ARTIFICIAL INTELLIGENCE AND KNOWLEDGE-BASED APPROACHES TO ARCHITECTURAL DESIGN - A RENEWED AGENDA
doi	https://doi.org/10.52842/conf.acadia.1993.155
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 155-162
summary	It has been noted that designers - when confronted with computers - have, by and large, refused to accept the introduction of apparently new design methodologies, and it has been speculated that this is the result of a failure of those methodologies to address the cognitive processes which take place in the course of designing. This position is somewhat suspect in that such innovations as computer-aided drafting -which also fail to recognize these processes have been widely accepted. It is perhaps more likely that the lack of acceptance results from a perception on the part of designers that the new methodologies either do not reflect some or all of those concerns that designers consider fundamental to design, or that they actively interfere with the designer's ability to accomplish what he/she sees as the goals of design. Given that the application of artificial intelligence and related work to architecture is still in its infancy, all of this suggests the need for a reassessment of the role of computing in design in order to clarify and strengthen those roles deemed appropriate. Two approaches to the integration of artificial intelligence and knowledge-based systems into architectural design practice are currently dominant. One attempts to create systems which can on their own produce designs, the other provides intelligent support for those doing design. It was, in part, the recognition of limitations in the ability of traditional CAD systems and building modelers to reflect what designers actually do that led to explorations into the idea of intelligent assistants. Development of such assistants was aided by research into the act and process of design through protocol and other studies. Although some work is currently being done in the development of artificial intelligence and knowledge based applications in architecture, and work continues to be done on the study of design methodologies, the bulk of available information in each of these areas remains in the realm of design disciplines related to but outside of architecture and do not reflect the explicit role of architectural design in the embodiment and expression of culture. The relationship of intelligence to culture has resulted in some skepticism regarding the ultimate capacity of neural nets and symbolically programmed computers in general. Significant work has been done questioning the rational tradition in computer development for its failure to address phenomena which are not easily subject to scientific analysis. Further skepticism regarding the role of artificial intelligence and knowledge-based or expert systems in architectural design has been emerging recently. Such criticism tends to focus on two issues: the nature of drawing as an activity which involves both the generation and interpretation of graphic artifacts, and the nature of the human designer as an active agent in the design process.
series	ACADIA
type	normal paper
last changed	2022/06/07 07:54

_id	e92c
authors	Dave, Bharat
year	1993
title	A Computer-Assisted Diagramming System
source	Swiss Federal Institute of Technology, ETH Zurich
summary	This research investigates characteristics and generation of graphic diagrams used in support of analysis, presentation and synthesis of information in various domains. The research is aimed at the development of a software system which can be used to specify, generate and manipulate diagrams similar to the way they are represented and operated upon in traditional media.Diagrams are graphic representations of symbolic propositions that allow tentative reasoning and inferencing, and enable a person to focus on selected aspects of a situation that are deemed of interest. The economy and directness of expression found in diagrams seem to be the prime reasons why they are so ubiquitous in many domains. Despite these advantages, studies into supporting diagrammatic representations using computers are rather sparse. This research is an attempt at developing a comprehensive framework of thought in this direction.In the context of design disciplines like architecture, this research forms a part of the continuum of studies in computer aided design techniques and tools. While a large number of tools and techniques in CAD have emerged so far, usage of such tools, due to their underlying representations, expects and demands commitment of too many details too early in the design process. This research is aimed at characterizing and developing a computer based diagramming system to support tentative reasoning using diagrams, and thus hopes to extend the scope of CAD environments in design.The thesis first articulates motivations for this topic in detail. Next, a discussion on the role played by diagrams as conceptual tools in various domains is presented. It is followed by a detailed look at characteristics and components of diagrams viewed as a graphic communication system. Next, a comprehensive set of requirements for an ideal software environment for diagramming tasks is developed. A prototype system called CDT was implemented and is used to demonstrate ideas developed in this research. The study concludes with some observations on contributions of this research effort and possible future extensions.
series	thesis:PhD
email
last changed	2003/05/10 05:43

_id	ddss9205
id	ddss9205
authors	De Scheemaker. A.
year	1993
title	Towards an integrated facility management system for management and use of government buildings
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The Government Building Agency in the Netherlands is developing an integrated facility management system for two of its departments. Applications are already developed to support a number of day-to-day facility management activities on an operational level. Research is now being carried out to develop a management control system to better plan and control housing and material resources.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9426
id	ddss9426
authors	Duijvestein, Kees
year	1994
title	Integrated Design and Sustainable Building
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In the international student-project "European Environmental Campus 91 TU Delft Dordrecht" 20 students from 13 European countries worked in september 1991, during three weeks on "EcologicalSketches for the Island of Dordrecht". They worked on four different scales: the region isle of Dordt / the district Stadspolders / the neighbourhood I the house and the block. The environmentaltheme's Energy, Water, Traffic & Noise, Landscape & Soil were together with spatial analyses combined with the different scales. This combination was organised following the scheme mentioned below. The characters stand for the students. During the first period they worked in research groups, during the last period more in design groups. For instance: student L works in the beginning with the students B, G and Q in the research group water. In the last period sheworks with K, M, N and 0 in the design group Neighbourhood. Those students worked earlier in the other research-groups and contribute now in the design-group their thematic environmental knowledge. The results were presented to the Dordrecht council, officials and press. In the next project in september and october 1993 we started earlier with the design groups. Ten Dutch and ten "Erasmus" students worked for six weeks on proposals for the Vinex location Wateringenthe Hague. Each morning they worked in the research groups each afternoon in the design groups. The research groups used the EcoDesign Tools, small applications in Excel on Apple Macintoshto quantify the environmental pressure.
series	DDSS
last changed	2003/08/07 16:36

_id	c31c
authors	Fantacone, Enrico
year	1993
title	Environmental Compatibility and Computer Aided Decision MakingRelated to the Third University in Rome: An Integrated Application of Several Methods
doi	https://doi.org/10.52842/conf.ecaade.1993.x.j1x
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	The EC Human Capital and Mobility Project, has allowed collaboration between Universita' di Roma .'La Sapienza", and University of Strathclyde (Glasgow), on a research programme developed by the author. The research consists on an integrated application of assessment methods that will allow designers, planners, and public administrators to operate on defined rules, to evaluate "a priori" the designing and planning parameters. The new integrated operating method, could be used for the elaboration of developing urban plans, or even for public design competition assessment.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9218
id	ddss9218
authors	Hensen, J.L.M.
year	1993
title	Design support via simulation of building and plant thermal interaction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Design decision support related to building energy consumption and/or indoor climate should be based on an integral approach to the environment, the building, heating, ventilating and air-conditioning (HVAC) system, and the occupants. The tools to achieve this are now available in the form of computer simulation systems which treat the building and plant as an integrated dynamic system. Although its potentials reach beyond the area of Computer Aided Building Design, the paper describes building and plant energy simulation within the context of CABD, design decision support and design evaluation. Currently, computer simulation is only used indirectly as a design decision support mechanism; that is, its power is not delivered very efficiently to the design profession. This paper suggests some future research directions. These are aimed at providing a mechanism to overcome this problem by developing an intelligent front end' which bridges the gap between sophisticated computer simulation tools and the design profession.
series	DDSS
last changed	2003/08/07 16:36

_id	caadria2007_675
id	caadria2007_675
authors	Huang, Joseph Chuen-Huei
year	2007
title	Decision Support System for Modular Houses
doi	https://doi.org/10.52842/conf.caadria.2007.x.x9q
source	CAADRIA 2007 [Proceedings of the 12th International Conference on Computer Aided Architectural Design Research in Asia] Nanjing (China) 19-21 April 2007
summary	Presently, only a small percentage of people in the world typically hire an architect to design and build a home which is tailored to their preference. Besides the architect’s fee, clients also need to wait an interminable time for design and construction. Factory-made prefabricated housing systems tried to solve this problem previously. However, most pioneers failed to address the issues of variability and individual needs (Kieran & Timberlake, 2004). Plants closed because they produced more than the market demand, and prefabricated housing provided less flexibility than the traditional stick-built housing. The advanced digital technology makes it possible to communicate design ideas and concepts to others more effectively. The project delivery process leads itself to customization, embodying principles of lean production (Pine, 1993), flexible computer-integrated design interaction with clients, and reduced cycle times; all effecting rapid response between consumers and producers.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ddssup9613
id	ddssup9613
authors	Kulkarni, R.G., Stought, R.R. and Haynes, K.E.
year	1996
title	Traffic Flow Landscapes
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Major metropolitan areas and constituent independent jurisdictions face the problem of providing efficient transportation for their residents and in-and out commuters. A typical trip taker spends considerable time on the road to reach the workplace and other destinations. Though it may seem counter-intuitive, adding more links to existing road networks and/or increasing traffic capacity by adding lanes does not necessarily decrease travel times (eg. Braess' paradox). But it is certain that a dense redundant network of roads would provide a trip taker with alternate routes when traffic incidents occur. These types of questions raise the question of, how to evaluate the flow characteristics of the entire road network of a jurisdiction and its larger region in keeping the traffic moving? Further, how may the impact of adding more links/ lanes or the blocking of existing links! lanes be best measured? To answer these and related questions, we propose a methodology to evaluate a fitness criteria for road networks based on Kauffman's biological NK model (1993). We specify a transportation road traffic flow landscape analogous to the fitness landscape of the NK model. Using the transportation road traffic flow landscape we derive a road fitness index that can be used to evaluate either the entire road network's traffic flows or subparts of such network's traffic flows. We explore the possibility of investigating traffic flow landscapes to search for optimal routes to clear traffic. Finally we describe an approach for applying the theoretical framework developed in the paper to the traffic conditions on the road network of the city of Fairfax, Virginia.
keywords	Fitness Landscapes, NK Model, Genotype, Gene, Self-Organization, ITS Technology
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9208
id	ddss9208
authors	Lucardie, G.L.
year	1993
title	A functional approach to realizing decision support systems in technical regulation management for design and construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Technical building standards defining the quality of buildings, building products, building materials and building processes aim to provide acceptable levels of safety, health, usefulness and energy consumption. However, the logical consistency between these goals and the set of regulations produced to achieve them is often hard to identify. Not only the large quantities of highly complex and frequently changing building regulations to be met, but also the variety of user demands and the steadily increasing technical information on (new) materials, products and buildings have produced a very complex set of knowledge and data that should be taken into account when handling technical building regulations. Integrating knowledge technology and database technology is an important step towards managing the complexity of technical regulations. Generally, two strategies can be followed to integrate knowledge and database technology. The main emphasis of the first strategy is on transferring data structures and processing techniques from one field of research to another. The second approach is concerned exclusively with the semantic structure of what is contained in the data-based or knowledge-based system. The aim of this paper is to show that the second or knowledge-level approach, in particular the theory of functional classifications, is more fundamental and more fruitful. It permits a goal-directed rationalized strategy towards analysis, use and application of regulations. Therefore, it enables the reconstruction of (deep) models of regulations, objects and of users accounting for the flexibility and dynamics that are responsible for the complexity of technical regulations. Finally, at the systems level, the theory supports an effective development of a new class of rational Decision Support Systems (DSS), which should reduce the complexity of technical regulations and restore the logical consistency between the goals of technical regulations and the technical regulations themselves.
series	DDSS
last changed	2003/08/07 16:36

_id	maver_071
id	maver_071
authors	Mathur, K. and Maver, T.W.
year	1993
title	Information Technology in the Management of Design and Construction
source	Management of Information Technology for Construction (Ed: K Mathur et al) World Scientific, 585-594
summary	This paper provides an overview of the developments in Information Technology (IT) and its impact on the Architecture, Engineering and Construction (AEC) industry. It takes note of what has transpired in the last two decades and how the evolution of this subject corresponds to the predictions which had been made at various times in the past. It concludes that changes in procedures, processes and structure of organisations are needed if the most effective use of IT is to be achieved, and it is timely to go beyond solutions which mimic and automate current processes. Strategic frameworks must be defined within which new solutions will emerge rather than specific technical solutions for individual design or automation tasks. Concurrent changes in the AEC professions and the management of projects and organisations will be required to support the new tools and techniques offered by IT. Thus no promises should be made purely on the basis of emerging technologies. Hence the paper makes no attempt to predict the future of the AEC industry even though integrated systems may become available to support creative, cooperative, multi-disciplinary design, and though such systems will assist construction automation tasks, maintenance and facility management.
series	other
type	normal paper
email
last changed	2015/02/20 11:30

_id	0f50
authors	Skauge, Jørn
year	1993
title	An Electronic Tool for Urban Design Analysis
doi	https://doi.org/10.52842/conf.acadia.1993.077
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 77-85
summary	Architects and urban designers are increasingly using computers in their attempt to improve decision making in urban design. Most existing systems emphasize hard data such as statistics, land use data, etc. In recent years with the use of more powerful computers we have seen a greater emphasis on managing visual data. Computer systems are being used to generate urban models and simulations of the various kinds of impact new developments have on the existing cityscape. This project emphasizes the use of visual data. The purpose of the research has been to develop a computer system for urban designers to use in analyzing urban architectural qualities. Therefore this project focuses on applying traditional methods and theories of urban designers rather than developing new computer techniques. The traditional methods and theories of urban designers fall within the category which the French theorist Francoise Choay calls Pre-urbanism and Urbanism - the Cultural Model. Theorists within this category include Camillo Sitte, Gordon Cullen, Kevin Lynch, Leon Krier, Aldo Rossi, Michael Trieb, Roger Tranzick and Thiis-Evensen. This computer system has been developed as a prototype in order to gain experience and knowledge for future development of a large system. Later development will be based upon a vectorized threedimensional model of a whole city using texture mapping and tracing techniques to annotate important architectural features. The computer system consists of the basic analysis module supplied with a simulation unit and a theory unit. With this analytical tool, analysis is conducted on three different urban scales. The prototype has been developed on the Macintosh computer with SuperCard as the authoring tool. The computer system was developed as a prototype for Danish Urban Designers and is currently being tested in conjunction with the city of Viborg, Denmark. ( population 55,000). Located in Jutland, Viborg was the capital of Denmark around the year 1000. It now functions as a center for regional government. Viborg was selected as the test site because of its historical core.
series	ACADIA
last changed	2022/06/07 07:56

For more results click below: