Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 256

Reformat results as: short short into frame detailed detailed into frame

_id	ae19
authors	Armstrong, Richard
year	1993
title	On The Technical Features Of The Endoscope - OES Modelscope as a Case in Point
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 153-156
summary	The Olympus Optical Company of Japan was formed in 1919, with the introduction of the first generation single lens reflects camera, and soon after with the first microscope. Since that time, the organisation has developed and is now split into three main divisions: manufacturing and supplying cameras, microscopes and endoscopes. Other smaller specialist divisions exist suppling such products as dictaphones. Perhaps, rather surprisingly, the endoscope division is the largest part of the organisation. Through a world-wide organisation of four main business centers, Olympus Industrial, the name given to the industrial endoscope division, provides service and support to its customers. Each of the main business centers operates through agents and distributors. There are many different industries which gain the benefits of saved time and money provided by using endoscopes. To meet the needs of so many varied industries, there is a need to have a wide range of equipment. This includes light sources, to provide illumination, rigid borescopes, flexible fiberscopes, if views around corners are needed, and the new technology videoscopes. These instruments use the latest CCD technology with a small chip situated in the distal end of the scope, instead of fiberoptic image bundles used in fiberscopes.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	7fe0
authors	Castleman, Kenneth R.
year	1993
title	Digital image processing
source	California Institute of Technologie
summary	Digital image processing has experienced explosive growth over the past two decades. Public awareness has increased by way of video games, digital video special effects used in the entertainement industry, as well as articles in the mainstream press. However, the most significant impact of digital image processing in the 90s will be in the area of applications of real world problems. To help readers keep pace, author Kenneth R. Castleman concentrates on those techniques that have proven most useful in practice. Part I presents several important concepts that can be developed without detailed mathematical analysis for a basic understanding. Part II addresses techniques that rely more on mathematics and eaborates analytically on certain concepts introduced in Part I. Part III covers specific application aread that are particularly in industry, science, and medicine. Contents: Preface; Images and Digital Processing; Digitizing Images; Digital Image Display; Image Processing Software; The Gray Level Histogram; Point Operations; Algebraic Operations; Geometric Operations; Filter Design; Wavelet Transformations; Image Restorations; Image Compression; Three Dimensional Image Processing; Appendices; Index.
series	other
last changed	2003/04/23 15:14

_id	0b24
authors	Chilton, J.C., Wester, T. and Yu, J.
year	1993
title	Exploring Structural Morphology Using CAD
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.d1k
summary	Often in the design process the student's imagination is restricted by their inability to visualise, model or accurately sketch ideas for innovative structural systems. By using CAD as a design tool it is possible to explore the morphology of complex structures and to be able to produce perspective drawings of them with relative ease. Within AutoCAD there is a small library of standard three-dimensional objects and surfaces that can be called upon to generate more complex forms. However, to further facilitate the architectural design process, an extended library of innovative structural forms would allow the professional designer, or student, greater design freedom and any increase in the palette of structural forms available should stimulate creativity. As practical examples, the paper describes how students have been encouraged to experiment with the use of structures which can only be physically modelled with difficulty and which are also difficult to represent on the two- dimensional surface of the drawing board unless the geometry has previously been determined by the methods described. These are (i) Reciprocal Frame three-dimensional beam grillage structures and (ii) plate domes created from lattice structures by point-to- plane duality. The problem, of representation of these structures has been overcome, in the first case, by generating AutoLISP procedures to draw the complex three-dimensional geometrical form automatically in AutoCAD and, in the second case, by the development of the computer program CADual.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	8326
authors	Diessenbacher, Claus and Rank, Ernst
year	1993
title	Teaching Design with CAD?
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.i1h
summary	Abstract as well as functionally dependant design exercises are essential components of an architectural education at nearly every university. Their goal is to provide architect students with a feeling for proportions, colours, materials etc., and to teach and train them in threedimensional thinking. Pictures and concepts, developed by the designer are materialized by various technologies such as with pencil and paper in the traditional two-dimensional techniques or with clay, wood, paper etc. in three-dimensional modeling. Now the computer and the CAD-system join the palette of the designers available resources in presentation as both a two-dimensional and a three-dimensional medium. Although CAD is often considered and taught to be only a better drafting tool, the educational goal of our group at the University of Dortmund is to employ CAD as a design support medium. The prerequisites for work with the computer and the CAD system are provided in a compulsory two semester undergraduate subject. Basic programming, work with spreadsheets etc. are some exemplary themes provided in the form of lectures and practical exercises. A main emphasis of this instruction is the mastery of three-dimensional working technology with a comprehensive CAD-System. In cooperation of our computer science group and architecture chairs, seminars involving the use of CAD as a three-dimensional design tool, are offered as graduate courses. The seminars consist of loops of modeling and evaluating objects in a three-dimensional space. With this, the most possible realistic studies in colour, light and proportion take place exclusively on the computer.
series	eCAADe
last changed	2022/06/07 07:50

_id	db3b
authors	Faugeras, O.
year	1993
title	Three-dimensional computer vision, a geometric viewpoint
source	MIT press
summary	This monograph by one of the world's leading vision researchers provides a thorough, mathematically rigorous exposition of a broad and vital area in computer vision: the problems and techniques related to three-dimensional (stereo) vision and motion. The emphasis is on using geometry to solve problems in stereo and motion, with examples from navigation and object recognition.
series	other
last changed	2003/04/23 15:14

_id	4203
authors	Fraser, Michael
year	1993
title	Boundary Representation in Practice
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 173-185
doi	https://doi.org/10.52842/conf.acadia.1993.173
summary	There is an essential contradiction between the making of buildings or built environments in a threedimensional modeler and the graphic control of this process. Three-dimensional modeling is a constructive activity, in which solids are assembled as they would be in an actual structure; it benefits the designer. Presentation and documentation, on the other hand, are prescriptive activities that direct some of the construction and all the visualization and criticism of the proposal; they benefit the user and builder. A building while being designed can be visualized and criticized from its solid model, and the model can take a variety of forms depending on its part): computer-based, drawn in orthographic or perspective projection, constructed of cardboard or wood, or described narratively by means of text, programmatic data, performance model or animation. However, practicing architecture is the process of recording and communicating the decision making process and the contractual obligations that result. In actual practice, in contrast to the designer directed ideal, more participants are brought in sooner at the beginning of a project and with more publicity, which in turn means keeping more, not fewer, records. As the profession evolves, records of the string of design decisions will become more automated, more carefully structured and more retrievable. More buildings will be "tracked" and exposed to review in this way because public environmental sensitivity will improve. The communication between a single designer and his own thoughts will become less and less important.
series	ACADIA
last changed	2022/06/07 07:50

_id	c9de
authors	Harfmann, Anton C.
year	1993
title	Component-Based, Three-Dimensional "Working Drawings"
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 141-151
doi	https://doi.org/10.52842/conf.acadia.1993.141
summary	It is now possible to communicate technical information about a building utilizing accurate threedimensional computer modeling of component assemblies of an entire building for the production of an alternative set of "working drawings." Most assembly illustrations and final appearance can be presented as output from the computer model. The use of these three-dimensional images in the practice of architecture may improve communication between the members of the building design team and, therefore, may improve the overall design integration of the various systems in a building. Additionally, this type of component model construction for the production of technical drawings offers a unique bridge over the gap between the practice of architecture and the teaching of architecture. Rather than teaching students how to "do working drawings," something all practitioners wish the academic institutions did, students would develop the ability to design, integrate, and construct complex three-dimensional assemblies and present them in a variety of ways using the standard sections, layers, view, etc. inherent in any reasonable threedimensional computer based modeling system.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	c5bb
authors	Hirschberg, U., Meister, M. and Neumann, F.
year	1993
title	Processing of Geographic Data for CAAD-supported Analysis and Design of Urban Development Areas
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.w2h
summary	The interdisciplinary research project aims at the development of a hard- and software environment to support the representation, analysis, manipulation and design of urban development areas for architects and city planners. It was started in 1990 and involves three groups at the ETH Zurich: Architecture/Urban design - Processing of Geographic Data/Photogrammetry -Computer Sciences/CAAD. The first part of this paper will give an introduction to the goals and implications of the project by comparing it with a similar project one of the authors took part in as a student. Then the paper gives a brief description of the work of the three groups involved, an overview of the methods they employed and the results that were achieved. The main focus will be on the work of the CAAD group . Finally some conclusions are drawn and problems are discussed. The future work includes the testing of the tool by students during the winter term 1993/94.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	09b4
authors	Ismail, Ashraf and McCartney, Kevin
year	1993
title	A Tool for Conceptual Design Evaluation Based on Compliance with Site-Development Briefs and Related Planning Regulations
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
doi	https://doi.org/10.52842/conf.ecaade.1993.x.c6i
summary	The need has been established for a computer based decision support tool to use during the conceptual stages of architectural design. The main functions are to check design compliance with the requirements of local planning authorities; characteristics evaluated will include building size, height, plot ratios, circulation and accessibility, and the preservation of natural features on site. This tool is being developed to operate under AutoCAD environment; the construction industry standard computer aided design software, following standard layering convention, integrated command lines, and pull-down menus. In addition to the common graphical output; i.c. plans, elevations and three dimensional models, it will generate textual analysis in report format to use as part of the Environmental Impact Analysis of proposed development. The tool's functions will be based upon the result of two types of field studies. First, interviews and questionnaires will be carried out with architects and planners of both private and public sectors. These will cover issues related to the performance of Computer Aided Architectural Design applications with regard to the evaluation of design schematics, and decision-making for the production of data for environmental statements. Second, field observation and participation will be carried out to observe decision-makers behaviour during assessment of building design proposals. A prototype is currently under development and will be tested against the expectations of the tool designer, Ashraf Ismail, and a team of professionals to be involved in the field studies. A critical analysis of the prototype design methodology and the study findings will be documented in the research thesis to be presented in June 1995.
series	eCAADe
last changed	2022/06/07 07:50

_id	ab3c
authors	Kramer, G.
year	1996
title	Mapping a Single Data Stream to Multiple Auditory Variables: A Subjective Approach to Creating a Compelling Design
source	Proceedings of the Third International Conferenceon Auditory Display, Santa FO Institute
summary	Representing a single data variable changing in time via sonification, or using that data to control a sound in some way appears to be a simple problem but actually involves a significant degree of subjectivity. This paper is a response to my own focus on specific sonification tasks (Kramer 1990, 1993) (Fitch & Kramer, 1994), on broad theoretical concerns in auditory display (Kramer 1994a, 1994b, 1995), and on the representation of high-dimensional data sets (Kramer 1991a & Kramer & Ellison, 1991b). The design focus of this paper is partly a response to the others who, like myself, have primarily employed single fundamental acoustic variables such as pitch or loudness to represent single data streams. These simple representations have framed three challenges: Behavioral and Cognitive Science-Can sonifications created with complex sounds changing simultaneously in several dimensions facilitate the formation of a stronger internal auditory image, or audiation, than would be produced by simpler sonifications? Human Factors and Applications-Would such a stronger internal image of the data prove to be more useful from the standpoint of conveying information? Technology and Design-How might these richer displays be constructed? This final question serves as a starting point for this paper. After years of cautious sonification research I wanted to explore the creation of more interesting and compelling representations.
series	other
last changed	2003/04/23 15:50

_id	8bad
authors	Matalasov, Michael
year	1993
title	Technical Conception of Videosystems Laboratory at Moscow Institute of Architecture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 47-50
summary	The basic point of our conception is not to submit the architect to technical means, but give him freedom of choice and the opportunity to work in the environment closest to the real one. In our situation it means, that we should provide work in real videoinformative space. Thus, our conception of education is to give all the junior students compulsory general information about videosimulation, and to ensure optional more professional work of undergraduates while carrying out their school projects. We consider, that in the architect’s activity simulation (making small-scale models) plays an essential part, because the small-scale model is the first and the only source of true three-dimensional information about the object designed. At the same time videosimulation does not deny or substitute computer-aided design. To get reliable visual information from the model is possible with the help of special technical means equipped with periscopic devices. In Moscow Institute of Architecture this work has been carried out for 10 years.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	c308
authors	Ohno, Ryuzo and Hata, Tomohiro
year	1993
title	The Effect of Spatial Structure on Visual Search Behavior
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 89-98
summary	People’s voluntary movement through an environment is essential for their comprehension of three dimensional space. It may be hypothesized that they move and look around in order to pick up wanted information at the time. This study investigated the following more specific hypotheses by an experiment using a user-controlled space-sequence simulator and the analysis of the subjects’ behavioral data recorded by the simulation system: (1) The strategy of visual search behavior (body movement and viewing direction) is influenced by spatial structure (form and organization). (2) The strategy can be explained by the amount of visual information in the environment, i.e., people move and look in a certain direction in order to maximize effective information at a given moment and position. - If these hypotheses are supported, we can predict people’s behavior in an unfamiliar place on the basis of the spatial structure.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	1d5a
authors	Schnabel, M.A., Kvan, T., Kruijff, E. and Donath, D.
year	2001
title	The First Virtual Environment Design Studio
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 394-400
doi	https://doi.org/10.52842/conf.ecaade.2001.394
summary	Since 1993 schools of architecture all over the world conduct in various forms of Virtual Design Studio (VDS). They have become an established part of teaching design within the digital realm. They vary in task and structure, are purely text-based or include various forms of interactive, synchronous or asynchronous collaboration. However, ‘virtual’ always refers to the method of communication and exchange of design and ideas. Students have never designed within immersive virtuality. This paper describes the first successful attempt to conduct a Joint Design Studio, which uses Virtual Environment (VE) as tool of design and communication between the remote partners. This first VeDS focused on how architectural students make use of this particular different approach to design within immersive three-dimensional VEs. For example, the students created 3D-immersive design proposals, explored dependencies to textual description of initial intentions and communicated between local and remote team-partners in immersive VE as well as textbased communication-channels. The paper subsequently describes the VeDS, its set-up, realization and outcome. We discuss frameworks and factors influencing how architectural students communicate their proposals in immersive VeDS, and how this new approach of design studio enables new forms of design expressions.
keywords	Immersive Virtual Reality, Collaborative Design, Joint Design Studio, Preliminary Design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	705c
authors	Schnabel, Marc Aurel and Kvan, Thomas
year	2001
title	Implementing The First Virtual Environment Design Studio
source	Architectural Education for the Asian Century, Proceedings of the 1st ACAE Conference on Architectural Education, Milton Tan, editor, Centre for Advanced Studies in Architecture, National University of Singapore, pp. 157-166
summary	Since 1993 schools of architecture all over the world conduct in various forms of Virtual Design Studio (VDS). They have become an established part of teaching design within the digital realm. They vary in task and structure; are purely text-based or include various forms of interactive; synchronous or asynchronous collaboration. However; ‘virtual’ always refers to the method of communication and exchange of design and ideas. Students have never designed within immersive virtuality. This paper describes the first successful attempt to conduct a Joint Design Studio; which uses Virtual Environment (VE) as tool of design and communication between the remote partners. This first VeDS focused on how architectural students make use of this particular different approach to design within immersive three-dimensional VEs. For example; the students created 3D-immersive design proposals; explored dependencies to textual description of initial intentions and communicated between local and remote team-partners in immersive VE as well as text-based communication-channels. The paper subsequently describes the VeDS; its set-up; realization and outcome. We discuss frameworks and factors influencing how architectural students communicate their proposals in immersive VeDS; and how this new approach of design studio enables new forms of design expressions.
keywords	Virtual Environment; Remote Collaboration; Design Evaluation; Spatial Understanding
series	other
email
last changed	2002/11/15 18:29

_id	291d
id	291d
authors	Van Bakergem, Davis W. and Obata, Gen
year	1993
title	MAKING THE PROBLEM VISIBLE: PROJECT SPECIFIC INFORMATION IN COLLABORATIVE DESIGN
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 471-480
summary	This paper describes our current work in the development of an interactive, collaborative design space. It attempts to anticipate a future in which complex design Problems are undertaken by an interdisciplinary, collaborative group of contributors working within an electronic, networked environment. These networked working groups are made possible by the expanded use of high-speed digital networks and are expected to continue to grow within the design profession Using the design of an academic building as a case study, several new tools and techniques were used to develop an information place superimposed over the three-dimensional digital model of the site and proposed building. These tools allow the user to create a collection of data including site documentation and analysis; propose interventions; and access the data through three-dimensional icons in the modeL Several new techniques related to collecting and accessing information within the collaborative space are discussed.
keywords	Collaboration, Hypermedia, Information Visualizer, Virtual Workspace, Image Collections
series	CAAD Futures
type	normal paper
last changed	2004/04/10 06:43

_id	60f3
authors	Wright, Robert M. and Hoinkes, Rodney M.
year	1993
title	Computational Issues in Urban Design: Developing a Strategy for Solar Impact Assessment
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 543-555
summary	A comprehensive method for identifying the impacts on solar access of large scale architectural projects still continues to be an important and controversial area in city planning and urban design. Previous research studies such as the Sun Wind and Pedestrian Comfort, a study of Toronto's Central Area, demonstrated approaches possible when dealing with solar issues related to urban design. Existing techniques for solar inventory, analysis and evaluation, while effective, are often dependent on single event analysis (shadow casting) or manual procedures that are time consuming and exceedingly complex especially when needed for day-to-day use by planners or architects involved in complex urban projects. The Centre for Landscape Research has undertaken as part of its research to develop a computational approach that would help city urban designers evaluate and represent the issues of solar access in an urban setting. This paper will outline a series of computational methods developed to utilize an existing municipal digital data base and to describe complex issues of solar access in terms of urban form and context. A technique will be described that quantitatively assesses the total solar potential of a site as compared to changes in solar access due to different urban design proposals. Two-, three- and four-dimensional representation techniques are developed to facilitate understanding of the analysis to users such as city officials, the public, developers, etc.
keywords	Solar Assessment, Urban Design, Open Space, Modeling Visualization
series	CAAD Futures
last changed	1999/04/07 12:03

_id	855d
authors	Alavalkama, I., Aura, S. and Palmqvist H. (Eds.)
year	1993
title	Endoscopy as a Tool in Architecture
source	Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3 / Tampere (Finland), 25-28 August 1993, 196 p.
summary	The European Architectural Endoscopy Association was established in connection with the Association’s first international conference on August 25-28, 1993, which was hosted by the Department of Architecture at the Tampere University of Technology. The purpose of the EAEA is to promote experimentation, research, communication, exchange of experiences, collaboration, user participation and teaching in the field of endoscopy and environmental simulation. The first EAEA conference was attended by 25 people from 15 different universities. Working under the general heading of “Endoscopy as a Tool in Architecture”, the conference had three specific themes for the first three days: Review of Existing Laboratories; Theories, Methods and Applications; and the Future of Endoscopy. In this volume we have compiled all the papers that were presented at the conference. The texts have been printed in the form we received them, without any attempt to edit them for consistency in style, adding hopefully to a sense of authenticity. Unfortunately, the impressive videos we saw at the conference on the possibilities of endoscopy and environmental simulation as a tool in architecture, cannot be documented here.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	d6a3
authors	Alkhoven, Patricia
year	1993
title	The Changing Image of the City
source	University of Utrecht
summary	The image and structure of a town are constantly subject to a dynamic process of change and continuity. Visual material, such as photographs, historical maps, town plans, drawings and prints, show us the impact of these changes on the image of a town. The main point of departure of this study stems from the question of how this process of change and continuity is visually detectable in a town or city. The fact that the ideas about the appearance of a city (gradually) change, can be read from the often subtle changes in the townscape. Though in many cases we have a general knowledge of the choices made in urban management, the most difficult problem is to detect the underlying decisions. This raises the question to what extent these changes and also the continuities are the result of deliberate choices in urban management and to what extent they are autonomous developments in the townscape resistant to interventions. Using different kinds of visual information as a basis, computer visualization techniques are used in the present study to examine some cartographic maps and to reconstruct the urban development in the twentieth century of the town of Heusden three-dimensionally in significant phases. The resulting visualization provides us with a tool for a better understanding of the dynamics of urban transformation processes, typologies and morphological changes and continuities.
keywords	3D City Modeling
series	thesis:PhD
email
more	http://www.library.uu.nl/digiarchief/dip/diss/01754573/hfdheus.htm
last changed	2003/05/15 21:36

_id	a927
authors	Amirante, Isabella and Bosco, Antonio
year	1995
title	Hypertext Between Research and Teaching: An Experience in a Didactic Building Technology Laboratory
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 3-12
doi	https://doi.org/10.52842/conf.ecaade.1995.003
summary	IPER (hypertext for the knowledge of building patrimony) is the result of a research developed with C.N.R. (National Research Institute). The aim of IPER is to provide the knowledge, the description and the management of one or more historical buildings for public or private institutions. IPER allowed us to improve our methodology of building analysis, covering various disciplinary fields, in two different systems. (1.) the first one, synthetic and suitable for a group of historical buildings, (2.) the second one, complex and particularly made for monumental buildings. // This experience is related to the new regulation of teaching architecture in Italy made in 1993. The main novelty is the introduction of the laboratories with the contemporary presence of two or three teachers of different disciplines, working together with the students on the same project with different approaches. This opportunity allowed us to introduce the "knowledge engineer" as a teacher in the laboratory of building technology. IPER is given to the students with the aim of experimenting and solving the theoretical and practical difficulties that students of different years may encounter in the knowledge and representation of buildings and in the organisation of all the data from the case study.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_1.htm
last changed	2022/06/07 07:54

For more results click below: