Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 248

Reformat results as: short short into frame detailed detailed into frame

_id	42ab
authors	Dagit, Charles E.
year	1993
title	Establishing Virtual Design Environments in Architectural Practice
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 513-522
summary	This paper attempts to specify the ideal computerized architectural design tool and outlines steps that are being taken to make this ideal a reality. Section 2 offers a user-centered assessment of the way technology is currently implemented in the design professions. Section 3 describes the state-of-the-art in high-end CAAD applications, including computer rendering, walk-through displays, and expert diagnostic sysWins. Section 4 details work in progress at Worldesign, Inc., a virtual worlds systems integration firm, which is developing Virtual Design Environment (VDE) systems.
keywords	Computer-Aided Architectural Design (CAAD), Computer-Aided Engineering (CAE), Virtual Worlds Technology, Visualization, Computer Generated Environments, Computer Modeling, Virtual Reality, Information Systems, Information Design
series	CAAD Futures
last changed	1999/04/07 12:03

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	2979
authors	Henry, D. and Furness, T.A.
year	1993
title	Spatial Perception in Virtual Environments: Evaluating an Architectural Application
source	IEEE Virtual Reality Annual International Symposium, 1993, Seattle
summary	Over the last several years, professionals from many different fields have come to the Human Interface Technology Laboratory (H.I.T.L) to discover and learn about virtual environments. In general, they are impressed by their experiences and express the tremendous potential the tool has in their respective fields. But the potentials are always projected far in the future, and the tool remains just a concept. This is justifiable because the quality of the visual experience is so much less than what people are used to seeing; high definition television, breathtaking special cinematographic effects and photorealistic computer renderings. Instead, the models in virtual environments are very simple looking; they are made of small spaces, filled with simple or abstract looking objects of little color distinctions as seen through displays of noticeably low resolution and at an update rate which leaves much to be desired. Clearly, for most applications, the requirements of precision have not been met yet with virtual interfaces as they exist today. However, there are a few domains where the relatively low level of the technology could be perfectly appropriate. In general, these are applications which require that the information be presented in symbolic or representational form. Having studied architecture, I knew that there are moments during the early part of the design process when conceptual decisions are made which require precisely the simple and representative nature available in existing virtual environments.
series	journal paper
last changed	2003/04/23 15:14

_id	bdc5
authors	Lehane, A., Wright, D. and Lambourne, E.
year	1993
title	Parallel Modeling: Addressing the Issues of Creative Designing in CAD Environments II. Special Applications
source	Proceedings of the Fifth International Conference on Human-Computer Interaction 1993 v.1 pp. 249-254
summary	We postulate that Industrial Designers, in general, solve a given problem by generating a series of proposed solutions to that problem, each proposal, in theory, helps the designer to converge on the ideal solution. Any number of solutions may be under continuous development at any one time and any previous solutions should always be available for appraisal and viewing. The single modeling environment provided in traditional Computer Aided Design (CAD) systems does not support this practice. Thus, CAD systems are primarily used to address the final phases of the design process, such as analysis, visualisation and detailing. This is surely not utilising the full potential of such a powerful design tool. In an attempt to develop a less restrictive working practice for CAD users, we consider a parallel modeling approach. This solution allows the simultaneous development, design and review of a number of computer based solutions.
keywords	Paper Based Design Process; Parallel Modeling; Computer Based Design Process; Sets; Industrial Design; Set Theory; Directed Acyclic Graph; Seed
series	other
last changed	2002/07/07 16:01

_id	4ee4
authors	Rutherford, James H.
year	1993
title	Knodes: Knowledge-Based Design Decision Support
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 357-374
summary	This paper describes the work in progress to develop a knowledge-based design support (KNODES) environment. The KNODES environment is intended to improve a designer's decision making potential, and to assist designers in a broad range of disciplines by making design knowledge and information more accessible. The framework exists as a multi-layered knowledge-based system reflecting both generic and domain specific aspects of the design activity and is designed to: enable the rapid dissemination of new design information, thus responding to shifts in design standards; take advantage of existing empirical design tools in unstructured areas of the design process; accommodate changes in user expectations and technological innovations at both the system and domain levels thus ensuring long term continuity and support,- offer multiple view points of the same design data by means of interchangeable interpreters. A prototype building design framework configured using the KNODES development tools is used to illustrate some of the salient features of the framework. Finally the paper will conclude with some insights into how such a design framework may be used as a knowledge acquisition tool in order to derive and formalise models of the design process.
keywords	Computer-Aided Design, Design Frameworks, Multi-Level Knowledge-based Systems, Blackboard Architecture
series	CAAD Futures
last changed	1999/04/07 12:03

_id	1d5a
authors	Schnabel, M.A., Kvan, T., Kruijff, E. and Donath, D.
year	2001
title	The First Virtual Environment Design Studio
doi	https://doi.org/10.52842/conf.ecaade.2001.394
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 394-400
summary	Since 1993 schools of architecture all over the world conduct in various forms of Virtual Design Studio (VDS). They have become an established part of teaching design within the digital realm. They vary in task and structure, are purely text-based or include various forms of interactive, synchronous or asynchronous collaboration. However, ‘virtual’ always refers to the method of communication and exchange of design and ideas. Students have never designed within immersive virtuality. This paper describes the first successful attempt to conduct a Joint Design Studio, which uses Virtual Environment (VE) as tool of design and communication between the remote partners. This first VeDS focused on how architectural students make use of this particular different approach to design within immersive three-dimensional VEs. For example, the students created 3D-immersive design proposals, explored dependencies to textual description of initial intentions and communicated between local and remote team-partners in immersive VE as well as textbased communication-channels. The paper subsequently describes the VeDS, its set-up, realization and outcome. We discuss frameworks and factors influencing how architectural students communicate their proposals in immersive VeDS, and how this new approach of design studio enables new forms of design expressions.
keywords	Immersive Virtual Reality, Collaborative Design, Joint Design Studio, Preliminary Design
series	eCAADe
email
last changed	2022/06/07 07:57

_id	705c
authors	Schnabel, Marc Aurel and Kvan, Thomas
year	2001
title	Implementing The First Virtual Environment Design Studio
source	Architectural Education for the Asian Century, Proceedings of the 1st ACAE Conference on Architectural Education, Milton Tan, editor, Centre for Advanced Studies in Architecture, National University of Singapore, pp. 157-166
summary	Since 1993 schools of architecture all over the world conduct in various forms of Virtual Design Studio (VDS). They have become an established part of teaching design within the digital realm. They vary in task and structure; are purely text-based or include various forms of interactive; synchronous or asynchronous collaboration. However; ‘virtual’ always refers to the method of communication and exchange of design and ideas. Students have never designed within immersive virtuality. This paper describes the first successful attempt to conduct a Joint Design Studio; which uses Virtual Environment (VE) as tool of design and communication between the remote partners. This first VeDS focused on how architectural students make use of this particular different approach to design within immersive three-dimensional VEs. For example; the students created 3D-immersive design proposals; explored dependencies to textual description of initial intentions and communicated between local and remote team-partners in immersive VE as well as text-based communication-channels. The paper subsequently describes the VeDS; its set-up; realization and outcome. We discuss frameworks and factors influencing how architectural students communicate their proposals in immersive VeDS; and how this new approach of design studio enables new forms of design expressions.
keywords	Virtual Environment; Remote Collaboration; Design Evaluation; Spatial Understanding
series	other
email
last changed	2002/11/15 18:29

_id	a5c8
authors	Smulevich, Gerard
year	1993
title	CAD in the Design Studio: The Discovery of Inhabitation
doi	https://doi.org/10.52842/conf.acadia.1993.039
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 39-53
summary	The impact of CAD on the design process itself has to date been negligible. The vast majority of architects using information technology in the design of buildings have been either job-trained, viewing CAD as an optimization tool, or educated in academic programs where CAD is treated as a specialized subject, isolated from the core design studios and allowing for the perpetuation of manufacturing/ systems based ideologies which have changed very little over the last century. The tragedy is that this is happening while the design studios themselves explore vastly more complex and contemporary issues highlighted by the works of architecture's avantgard. The result is a constant, perverse repetition of arcane, industrial-age processes spilling over into information-age environments, constituting a misuse of the electronic medium; one that could offer the possibility of restating conceptual spatial exploration by its own definition and enabling students and by extension the profession to envision and test the design of the built environment from its most essential aspect, that of inhabitation. There is a synthetic chunk of universe at our fingertips where we can explore space not as an abstraction but as a phenomenological experience, allowing us to exercise our freedom to move and possibly regain our condition of Modernity.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	4cd5
authors	Thiel, Philip
year	1993
title	A Better Understanding of The Role of Endoscopy as a Tool in Architecture
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 123-128
summary	As the most tool-dependent species on our planet, our technology determines our activities and thus defines our existence. Because of this a clear understanding of the ends-means relationship of our tools is of critical social- and professional-concern. Endoscopy, or the use of periscopic-like devices to extract human eye-level visual images, static or dynamic, from iconic scale models of proposed environments, is a case in point. Use is appropriate at advanced stages of planning and design, when such experiential simulations are necessary for both professional evaluation and lay approval. But note that the simulation is only a means to an end, and that the fundamental purpose is to evoke a response to a proposal. Simulation and response are opposite sides of the same coin, and the response is the goal. Any such responses are meaningful only with reference to the ultimate users’ experiential preferences, preferably explicitly established as ”performance specifications” before the start of the design process in consultation with a representative sample of these people. This implies the necessity of a means to identify these beneficiaries of our work, and a means to characterize their environmental ”experiential profiles”. It also requires a means for the discursive scripting of their experiential preferences. The development of a design oriented to the achievement of these ends then depends on a similar time-based scoring for the description of sequentially-experienced environmental attributes, hypothesized as related to these responses. Endoscopy then takes its place as the means for a penultimate check on the experiential design-hypotheses, in conjunction with suitable means to record the simulates’ responses in the same format as the original experiential performance specifications, for comparison therewith. The danger in being the most tool-dependent species on Earth is that in our necessary concern with technological means we may loose sight of our ultimate human ends; as suggested by the apothegm ”the operation was a success, but the patient died”. Our inexorable impetus toward technological development means that the specialized training that is inherent in professional education tends to separate and distance the perceptions of those so conditioned from those of the many others who are the presumed beneficiaries of their efforts.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	e9f1
authors	Alaimo, G., Pellitteri, G. and Scianna, A.
year	1993
title	A Tool for Typological Analysis
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q0g
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	Any design problem is faced drawing from the architect's knowledge both case knowledge and general knowledge. One type of the latter is abstracted from a multiplicity of cases of which the common features are recognised in such a way as to single out a prototype representing in the best way a class of architectural objects. If applied to a set of residential buildings and to the flats in them the analysis is typological and it is one of the fundamental ways of acquiring general knowledge to be used to face design problems. The tool we present is aimed at such a type of analysis and is based on the idea that it possible to acquire qualitative knowledge through the statistical analysis of measurable characteristics of the examined architectural objects. It has been tested by applying it to the typological analysis of a set of flats of illegal buildings in Sicily. The procedure is organised in two main phases. The first one consists in a series of elaborations performed during the reading of architectural organism; the second one consists in a series of statistical analyses on the results (characteristic variables) of the first.
series	eCAADe
last changed	2022/06/07 07:50

_id	855d
authors	Alavalkama, I., Aura, S. and Palmqvist H. (Eds.)
year	1993
title	Endoscopy as a Tool in Architecture
source	Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3 / Tampere (Finland), 25-28 August 1993, 196 p.
summary	The European Architectural Endoscopy Association was established in connection with the Association’s first international conference on August 25-28, 1993, which was hosted by the Department of Architecture at the Tampere University of Technology. The purpose of the EAEA is to promote experimentation, research, communication, exchange of experiences, collaboration, user participation and teaching in the field of endoscopy and environmental simulation. The first EAEA conference was attended by 25 people from 15 different universities. Working under the general heading of “Endoscopy as a Tool in Architecture”, the conference had three specific themes for the first three days: Review of Existing Laboratories; Theories, Methods and Applications; and the Future of Endoscopy. In this volume we have compiled all the papers that were presented at the conference. The texts have been printed in the form we received them, without any attempt to edit them for consistency in style, adding hopefully to a sense of authenticity. Unfortunately, the impressive videos we saw at the conference on the possibilities of endoscopy and environmental simulation as a tool in architecture, cannot be documented here.
keywords	Architectural Endoscopy
series	EAEA
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	20c1
authors	Alavalkama, Ilkka
year	1993
title	Technical Aspects of the Urban Simulator in Tampere University of Technology
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 35-46
summary	The colour video recording Urban Simulator in TUT was built very early compared with the development of video systems. A contract for planning the simulator electronics, mechanics and camera systems was made in january 1978 with two TUT students: Jani Granholm (computer science and engineering) and Ilkka Alavalkama (machine design and automation). Ease of control and maintenance were asked by side of ”human movement inside coloured small-scale architectural models”. From the beginning, all components of the system were carefully tested and chosen from various alternatives. Financial resources were quite limited, which lead to a long building process and to self-planned and produced mechanical and electronical elements. Some optical systems were constructed by using elements from various manufacturers.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	d6a3
authors	Alkhoven, Patricia
year	1993
title	The Changing Image of the City
source	University of Utrecht
summary	The image and structure of a town are constantly subject to a dynamic process of change and continuity. Visual material, such as photographs, historical maps, town plans, drawings and prints, show us the impact of these changes on the image of a town. The main point of departure of this study stems from the question of how this process of change and continuity is visually detectable in a town or city. The fact that the ideas about the appearance of a city (gradually) change, can be read from the often subtle changes in the townscape. Though in many cases we have a general knowledge of the choices made in urban management, the most difficult problem is to detect the underlying decisions. This raises the question to what extent these changes and also the continuities are the result of deliberate choices in urban management and to what extent they are autonomous developments in the townscape resistant to interventions. Using different kinds of visual information as a basis, computer visualization techniques are used in the present study to examine some cartographic maps and to reconstruct the urban development in the twentieth century of the town of Heusden three-dimensionally in significant phases. The resulting visualization provides us with a tool for a better understanding of the dynamics of urban transformation processes, typologies and morphological changes and continuities.
keywords	3D City Modeling
series	thesis:PhD
email
more	http://www.library.uu.nl/digiarchief/dip/diss/01754573/hfdheus.htm
last changed	2003/05/15 21:36

_id	ae19
authors	Armstrong, Richard
year	1993
title	On The Technical Features Of The Endoscope - OES Modelscope as a Case in Point
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 153-156
summary	The Olympus Optical Company of Japan was formed in 1919, with the introduction of the first generation single lens reflects camera, and soon after with the first microscope. Since that time, the organisation has developed and is now split into three main divisions: manufacturing and supplying cameras, microscopes and endoscopes. Other smaller specialist divisions exist suppling such products as dictaphones. Perhaps, rather surprisingly, the endoscope division is the largest part of the organisation. Through a world-wide organisation of four main business centers, Olympus Industrial, the name given to the industrial endoscope division, provides service and support to its customers. Each of the main business centers operates through agents and distributors. There are many different industries which gain the benefits of saved time and money provided by using endoscopes. To meet the needs of so many varied industries, there is a need to have a wide range of equipment. This includes light sources, to provide illumination, rigid borescopes, flexible fiberscopes, if views around corners are needed, and the new technology videoscopes. These instruments use the latest CCD technology with a small chip situated in the distal end of the scope, instead of fiberoptic image bundles used in fiberscopes.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	2ff9
id	2ff9
authors	Ataman, Osman
year	1993
title	Knowledge-based Stair Design
doi	https://doi.org/10.52842/conf.acadia.1993.163
source	Education and Practice: The Critical Interface [ACADIA Conference Proceedings / ISBN 1-880250-02-0] Texas (Texas / USA) 1993, pp. 163-171
summary	The application of computer--based technique to support architectural design has often concentrated on matters of representation. Typically, this means computer-aided drafting, and less frequently, computer-aided modeling and visualization. The promise of new computer-based tools to support the process of design has thus far failed to produce any significant tool that has had a widespread impact on the architectural profession. Most developments remain in university based research labs where they are used as teaching instruments in CAD courses or less often in design studios. While there are many reasons for this lack of dissemination, including a reluctance on the part of the architectural profession itself, the primary obstacles deal with difficulties in explicating design knowledge, representing this knowledge in a manner that can be used for design, and providing an intuitive and effective user interface, allowing the designer to easily use the tool for its intended purpose. This study describes a system that has been developed to address a number of these issues. Based on research findings from the field of Artificial Intelligence which expounds on the need for multiple techniques to represent any complex area of knowledge, we have selected a particular approach that focuses on multiple techniques for design representation. We review this approach in depth by considering its many facets necessary when implementing a knowledge-based system. We then partially test the viability of this approach through a small case study, implementing a knowledge-based system for designing stairs. While this effort only deals with a small part of the total design process, it does explore a number of significant issues facing the development of computer-based design assistants, and suggests several techniques for addressing these concerns.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	4c30
authors	Aura, Seppo
year	1993
title	Episode as a Unit of Analysis of Movement
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 53-66
summary	Everybody who has read his Gordon Cullen or his Edmund H. Bacon knows that movement has long been recognized as a factor in environmental planning in many ways. For example, in the traditional Japanese promenade garden the importance of movement has always been appreciated. The promenader gains an intense experience of the succession, variation and rhythm of the surrounding scene. The spaces and paths lead him from one stage to another. The spatial structure of the Japanese promenade garden, as well as of traditional Japanese architecture in general, is joined most intensively to time and motion. The environment is in relation to the flow of change in many sense, both concretely and existentially. Taking an example of western urban environment. Here perhaps the most marked sequential spaces are to be found in small medieval, mediterranean towns. Thanks to their organic growth, narrow and winding streets and the emphasis on public squares, most of them provide exciting experiences if the observer is only interested in seeing the townscape from the point of view of movement. There are also examples of this kind of environment in Finland. In old wooden towns like Porvoo and Rauma one can still find varied and rhythmic streetscapes and networks of streets and squares, together with a human scale and an almost timeless atmosphere. One could say that such an opportunity to experience spaces sequentially, or as serial visions, is an important dimension for us, especially as pedestrians. And as Gordon Cullen has shown there is in any urban environment much scope to heighten this experience. For example, by creating a sense of ’entering in’ some place, ’leaving for’, ’moving towards’, ’turning into’, ’walking through’ some place or ’following on’ the flow of spaces. Or, as Edmund H. Bacon has said, the departure point of good town planning should be that the successive towns spaces give rise to a flow of harmonic experiences: present experiences merge with earlier ones and become a step towards a future. Or, again in the words of Donald Appleyard, Kevin Lynch and John R. Myer: “The experience of a city is basically of a moving view, and this is the view we must understand if we wish to reform the look of our cities”.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ee23
authors	Bille, Pia
year	1994
title	A Study of Color
doi	https://doi.org/10.52842/conf.ecaade.1994.185
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 185-190
summary	Color courses are traditionally based on exercises carried out with either water color or colored paper. Use of the computer as a tool for teaching color theory and analyzing color in architecture was the topic of a course given at the School of Architecture and Planning at the State University of New York at Buffalo, USA where I was an exchange faculty in the academic year 1993/94. The course was structured into 3 topics: color theory, color perception and application of color.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	6858
authors	Bosselmann, Peter and Gilson, Kevin
year	1993
title	Visualizing Urban Form
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 9-30
summary	This article is about the use of visual simulation by urban designers. We explore briefly the history of simulation from its origins in the 1960s in the United States, explain guidelines for its application in urban design and planning projects, and discuss in greater detail how new simulation techniques might be integrated into design instruction and practice.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	0e89
authors	Bradford, J.W., Cheng, N. and Kvan, Thomas
year	1994
title	Virtual Design Studios
doi	https://doi.org/10.52842/conf.ecaade.1994.163
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 163-167
summary	Beginning in 1993, small groups of students of architectural design at different institutions around the world participated in collaborative design projects using a variety of tools, including CAD, Internet and teleconferencing. This programme, known as the "Virtual Design Studio" (VDS), allows students to work collectively with colleagues from different cultures and climates who are thousands of kilometres and in different time zones. Most recently, in February 1994, four institutions in N. America, one in Europe, and one in S E Asia participated in VDS’94. This paper explains the operation of the VDS and explores the future of the VDS as a potential tool for architectural design education. In particular, we review what we have learned in employing computer tools to extend the teaching in design studios into a "virtual" experience.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

For more results click below: