Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 255

Reformat results as: short short into frame detailed detailed into frame

_id	4c30
authors	Aura, Seppo
year	1993
title	Episode as a Unit of Analysis of Movement
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 53-66
summary	Everybody who has read his Gordon Cullen or his Edmund H. Bacon knows that movement has long been recognized as a factor in environmental planning in many ways. For example, in the traditional Japanese promenade garden the importance of movement has always been appreciated. The promenader gains an intense experience of the succession, variation and rhythm of the surrounding scene. The spaces and paths lead him from one stage to another. The spatial structure of the Japanese promenade garden, as well as of traditional Japanese architecture in general, is joined most intensively to time and motion. The environment is in relation to the flow of change in many sense, both concretely and existentially. Taking an example of western urban environment. Here perhaps the most marked sequential spaces are to be found in small medieval, mediterranean towns. Thanks to their organic growth, narrow and winding streets and the emphasis on public squares, most of them provide exciting experiences if the observer is only interested in seeing the townscape from the point of view of movement. There are also examples of this kind of environment in Finland. In old wooden towns like Porvoo and Rauma one can still find varied and rhythmic streetscapes and networks of streets and squares, together with a human scale and an almost timeless atmosphere. One could say that such an opportunity to experience spaces sequentially, or as serial visions, is an important dimension for us, especially as pedestrians. And as Gordon Cullen has shown there is in any urban environment much scope to heighten this experience. For example, by creating a sense of ’entering in’ some place, ’leaving for’, ’moving towards’, ’turning into’, ’walking through’ some place or ’following on’ the flow of spaces. Or, as Edmund H. Bacon has said, the departure point of good town planning should be that the successive towns spaces give rise to a flow of harmonic experiences: present experiences merge with earlier ones and become a step towards a future. Or, again in the words of Donald Appleyard, Kevin Lynch and John R. Myer: “The experience of a city is basically of a moving view, and this is the view we must understand if we wish to reform the look of our cities”.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	8077
authors	Shapira, A., Boyer, L.T. and Najem, Z.H.
year	1993
title	Decision support system for air base construction operations
source	The Int. Journal of Construction IT 1(2), pp. 69-82
summary	The United States Air Force has recently introduced a CAD software performing air base planning and operability functions. This paper presents a prototype system developed to support that software in enhancing decision-making processes for construction operations, by integrating its CAD/graphics capabilities with a database management system (DBMS). The system addresses the complexity and unique nature of the air base environment and takes due account of the importance of the efficient utilization of resources. It assists in the generation of alternative solutions and furnishes comparative and indicative evaluations of these, thus providing the decision maker with proper guidance towards the expeditious selection of good solution. System fundamentals and the rationale behind them are described. A typical scenario is presented, illustrating the concepts developed and demonstrating the potential benefits of the system as a practical decision-support tool. Although originally aimed for an air base environment, the proposed solution could also readily apply to civilian systems of similar characteristics.
series	journal paper
last changed	2003/05/15 21:45

_id	0ab2
authors	Amor, R., Hosking, J., Groves, L. and Donn, M.
year	1993
title	Design Tool Integration: Model Flexibility for the Building Profession
source	Proceedings of Building Systems Automation - Integration, University of Wisconsin-Madison
summary	The development of ICAtect, as discussed in the Building Systems Automation and Integration Symposium of 1991, provides a way of integrating simulation tools through a common building model. However, ICAtect is only a small step towards the ultimate goal of total integration and automation of the building design process. In this paper we investigate the next steps on the path toward integration. We examine how models structured to capture the physical attributes of the building, as required by simulation tools, can be used to converse with knowledge-based systems. We consider the types of mappings that occur in the often different views of a building held by these two classes of design tools. This leads us to examine the need for multiple views of a common building model. We then extend our analysis from the views required by simulation and knowledge-based systems, to those required by different segments of the building profession (e.g. architects, engineers, developers, etc.) to converse with such an integrated system. This indicates a need to provide a flexible method of accessing data in the common building model to facilitate use by different building professionals with varying specialities and levels of expertise.
series	journal paper
email
last changed	2003/05/15 21:22

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	4687
authors	Boekholt, J.T.
year	1993
title	Evaluation First Year Design Projects
doi	https://doi.org/10.52842/conf.ecaade.1993.x.u8b
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	During the first year students are taught that it is important to learn to evaluate their projects themselves. Therefore a checklist is introduced and explained over the year which can be used by the students to formulate their criteria, evaluation scales and weighting factors. The main aspects that are evaluated are utility, structural and manufacturing aspects. Only little attention during the first year is given to legal and economical aspects. Main goal is to develop a systematic and integrated approach towards the evaluation of design projects. The evaluation of the student is compared with the judgement of the teacher. Final marks are given by the teacher.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9205
id	ddss9205
authors	De Scheemaker. A.
year	1993
title	Towards an integrated facility management system for management and use of government buildings
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	The Government Building Agency in the Netherlands is developing an integrated facility management system for two of its departments. Applications are already developed to support a number of day-to-day facility management activities on an operational level. Research is now being carried out to develop a management control system to better plan and control housing and material resources.
series	DDSS
last changed	2003/08/07 16:36

_id	ca14
authors	Gavin, Lesley
year	1993
title	Generative Modelling and Electronic Lego
doi	https://doi.org/10.52842/conf.ecaade.1993.x.q8a
source	[eCAADe Conference Proceedings] Eindhoven (The Netherlands) 11-13 November 1993
summary	This paper shows work exemplifying the further extent of computer capabilities in the field of design. The work stems from a belief that for computers to be used effectively within the architectural profession their utility must stretch far beyond the process of description of geometric data, but be incorporated in the fundamental roots of design: that of conceptual design. Computers can be used to access the knowledge we have and then formulate this knowledge into a working language of design. Computers can be used to generate space and form in accordance with any relationship the designer may choose to set. This allows them to be used from the very conception of design. It is only by working from the very beginning, the very basis of the design of a building that we can fully develop the integration of computers in the construction industry. The work undertaken sets out primarily to explore one of the ways computers could be used in the field of architectural design. In recognition that an important byproduct of any design search is the enhanced understanding of the problem itself, the work was directed towards a particular project. This allowed each stage of thought to be to be considered as it arose and subsequently incorporated into the design model. The work does not attempt to automise the design process but simply tries to explore some of the opportunities offered by computers and see if they can be easily incorporated into the design process offering design solutions that may not otherwise have been considered. The exploration resulted in a simple design process model that incorporates the more accessible and useful aspects of computer technology.
keywords	Generative Modelling, Rule Based Form, Random Factors, Shape Grammars
series	eCAADe
email
last changed	2022/06/07 07:50

_id	49f3
authors	Glanville, Ranulph
year	1993
title	Looking into Endoscopy - The Limitations of Evaluation in Architectural Design
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 185-193
summary	The means available to architects in their age-old task of creating (most usually, though not necessarily) buildings that do not yet exist (ie. virtual realities), can be seen as falling into two groups. Those that help us develop architectural ideas (exploring), and those that help us evaluate or test them (illustrating). In the former category, we have, for instance, the ”drawing on the back of the envelope”, the discursive brainstorm, and the design ”conversation with ourselves via paper and pencil” (the drawing strikes back). In the latter, we may include physical model building, careful (projective) drawing (including drawings that are instructions for making), mathematical and design science modelling and calculating, visualising techniques such as the rendered perspective, most CAD (computer aided design) work and architectural endoscopy. These techniques may be thought of in two ways, as Bosselman reported: the explanation (eg. the organisational plan) and the experience (eg the ”photo-realistic” perspective). Attached to these we have rules for success, such as those of ”style” (in the broad sense of the personal style that allows us to assume that we have answers to problems that have yet to appear). It should be clear even from the list above that there are many more techniques and technologies for evaluation (illustration) than for exploration (design): such is the mystery of design. It is the primary purpose of this paper to invite those involved in providing the enormous effort that has gone into making such techniques for illustration — evaluation — to consider how their efforts help with that other, and crucial, area — that of exploring: and to redress some of the balance of that effort towards exploration. For it occurs to me (as a teacher of architecture), that evaluation does not provide a course for action — it merely helps us determine what may be wrong (according to some criteria with which we choose not to argue). And, no matter how right or wrong a design may be, knowing that it is wrong doesn’t help us either modify it, or find a better initial idea. It only tells us we are not right — always assuming the evaluative model is correct; perhaps.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	ddss9208
id	ddss9208
authors	Lucardie, G.L.
year	1993
title	A functional approach to realizing decision support systems in technical regulation management for design and construction
source	Timmermans, Harry (Ed.), Design and Decision Support Systems in Architecture (Proceedings of a conference held in Mierlo, the Netherlands in July 1992), ISBN 0-7923-2444-7
summary	Technical building standards defining the quality of buildings, building products, building materials and building processes aim to provide acceptable levels of safety, health, usefulness and energy consumption. However, the logical consistency between these goals and the set of regulations produced to achieve them is often hard to identify. Not only the large quantities of highly complex and frequently changing building regulations to be met, but also the variety of user demands and the steadily increasing technical information on (new) materials, products and buildings have produced a very complex set of knowledge and data that should be taken into account when handling technical building regulations. Integrating knowledge technology and database technology is an important step towards managing the complexity of technical regulations. Generally, two strategies can be followed to integrate knowledge and database technology. The main emphasis of the first strategy is on transferring data structures and processing techniques from one field of research to another. The second approach is concerned exclusively with the semantic structure of what is contained in the data-based or knowledge-based system. The aim of this paper is to show that the second or knowledge-level approach, in particular the theory of functional classifications, is more fundamental and more fruitful. It permits a goal-directed rationalized strategy towards analysis, use and application of regulations. Therefore, it enables the reconstruction of (deep) models of regulations, objects and of users accounting for the flexibility and dynamics that are responsible for the complexity of technical regulations. Finally, at the systems level, the theory supports an effective development of a new class of rational Decision Support Systems (DSS), which should reduce the complexity of technical regulations and restore the logical consistency between the goals of technical regulations and the technical regulations themselves.
series	DDSS
last changed	2003/08/07 16:36

_id	a944
authors	Maher, M.L., Gero, J.S. and Saad, M.
year	1993
title	Synchronous Support and Emergence in Collaborative CAAD
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 455-470
summary	Design is rarely an activity that is commenced and completed by an individual The more common design environment is one in which teams of designers work together towards a final solution. In this paper we consider issues involved in the development of computer-based design environments in which teams of design professionals can collaborate, focusing on the need for visual and underlying representations which can support multiple interpretations. We consider the environment as providing a shared workspace which facilitates both communication and progression of design ideas, concepts, and drawings. In the environment presented here, the shared workspace has two foci: the workspace that designers see and interact with, and the workspace that provides an underlying computer-based representation for persistent memory. The emphasis is on providing representations that support emergence that occurs during collaboration.
keywords	Collaborative Design, Team Design, Multi-User Synchronous CAAD, Shared Representation, Shared Workspace, Emergence
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	eaea2005_199
id	eaea2005_199
authors	Martens, Bob
year	2006
title	Dissemination of knowledge in architectural endoscopy
source	Motion, E-Motion and Urban Space [Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4], pp. 199-206
summary	The first EAEA conference was hosted 1993 in Tampere (Finland) and subsequently a further six conferences have taken place. Future conferences are already pre-scheduled and a steadily rising number of papers has been written. So far, the conference proceedings have been published in a paperbased format and, as these were published in small numbers, it is rather hard to take stock of preceding entries. However, the published proceedings can be regarded as capital for the EAEA-Association and it is both necessary and worthwhile to preserve this collective memory by means of an archived e-collection. At the time of the formation of the EAEA, electronic publishing was not yet widely used. Since then, computerbased infrastructure and related (web-based) software tools have become widely available. There is even an ongoing debate within the associations dedicated to electronic publishing, as to whether conference proceedings should be solely distributed in a digital format. Doubtless, a discussion towards the value of electronic publication output in the framework of research assessments etc. would be a step too far for this paper. Still, a dual strategy for the EAEA could be aiming at the production of a limited number of paperbased copies, which would mainly be distributed to the conference participants (and the remaining part being made available resp. free library copies to make this output more visible). However, the high commercial interest derived by financial revenues is not given and dissemination by digital means is far more in the interest of both the participants and the EAEA-association. Today, the creation of an electronic version of the conference proceedings costs very little extra. In both cases (analogue and digital) the materials should not only be “deposited” on the desktop of individuals, but also be capable of reaching more public destinations. As the conference host is changing biennially, it has to be confirmed that the hosting institution will handle the delivery of metadata. Local printing houses arrange the printing work, and no further interests (concerning copyright, revenues etc) from the side of publishing houses are in charge. The import of the provided metadata is supported by way of self-organisation on a shoestring budget, as it does not require extensive work if properly defined. This means that minimal effort is needed to make the material available and to achieve a certain level of sustainability.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

_id	cf2011_p093
id	cf2011_p093
authors	Nguyen, Thi Lan Truc; Tan Beng Kiang
year	2011
title	Understanding Shared Space for Informal Interaction among Geographically Distributed Teams
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 41-54.
summary	In a design project, much creative work is done in teams, thus requires spaces for collaborative works such as conference rooms, project rooms and chill-out areas. These spaces are designed to provide an atmosphere conducive to discussion and communication ranging from formal meetings to informal communication. According to Kraut et al (E.Kraut et al., 1990), informal communication is an important factor for the success of collaboration and is defined as ‚Äúconversations take place at the time, with the participants, and about the topics at hand. It often occurs spontaneously by chance and in face-to-face manner. As shown in many research, much of good and creative ideas originate from impromptu meeting rather than in a formal meeting (Grajewski, 1993, A.Isaacs et al., 1997). Therefore, the places for informal communication are taken into account in workplace design and scattered throughout the building in order to stimulate face-to-face interaction, especially serendipitous communication among different groups across disciplines such as engineering, technology, design and so forth. Nowadays, team members of a project are not confined to people working in one location but are spread widely with geographically distributed collaborations. Being separated by long physical distance, informal interaction by chance is impossible since people are not co-located. In order to maintain the benefit of informal interaction in collaborative works, research endeavor has developed a variety ways to shorten the physical distance and bring people together in one shared space. Technologies to support informal interaction at a distance include video-based technologies, virtual reality technologies, location-based technologies and ubiquitous technologies. These technologies facilitate people to stay aware of other‚Äôs availability in distributed environment and to socialize and interact in a multi-users virtual environment. Each type of applications supports informal interaction through the employed technology characteristics. One of the conditions for promoting frequent and impromptu face-to-face communication is being co-located in one space in which the spatial settings play as catalyst to increase the likelihood for frequent encounter. Therefore, this paper analyses the degree to which sense of shared space is supported by these technical approaches. This analysis helps to identify the trade-off features of each shared space technology and its current problems. A taxonomy of shared space is introduced based on three types of shared space technologies for supporting informal interaction. These types are named as shared physical environments, collaborative virtual environments and mixed reality environments and are ordered increasingly towards the reality of sense of shared space. Based on the problem learnt from other technical approaches and the nature of informal interaction, this paper proposes physical-virtual shared space for supporting intended and opportunistic informal interaction. The shared space will be created by augmenting a 3D collaborative virtual environment (CVE) with real world scene at the virtual world side; and blending the CVE scene to the physical settings at the real world side. Given this, the two spaces are merged into one global structure. With augmented view of the real world, geographically distributed co-workers who populate the 3D CVE are facilitated to encounter and interact with their real world counterparts in a meaningful and natural manner.
keywords	shared space, collaborative virtual environment, informal interaction, intended interaction, opportunistic interaction
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	e80e
authors	Van der Does, Jan
year	1993
title	Visualising by Means of Endoscope, Computer and Hand-Drawn Techniques
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 167-180
summary	Traditionally, communication during the various stages of the building process takes place via drawings of floor plans, elevations, perspectives and scale models. Computerized drawing techniques have recently come into use. Ways of presenting designs have increasingly become of far-reaching importance in current architecture. Nowadays architectural firms employ specialists who are familiar with the latest developments in the field of presentation techniques, or they farm this highly significant part of their job out to gifted designers. Some of the new techniques being developed endeavor to provide a more realistic presentation of designs of housing estates. Apart from new drawing techniques, mention should also be made of the endoscope, an instrument which can simulate an eye-level tour around a scale model while recording it on videotape. Realistic representations differ quite a lot from the conventional architectural presentation techniques applied, which require a larger amount of imagination on the part of the onlookers. The afore mentioned architectural notation systems, on the one hand, can only be understood by experts, in spite of added explanatory signs and symbols. The often used models and artist’s impressions, on the other hand, frequently create a somewhat distorted view, due to lack of concern for spatial proportions. As a consequence, the design presented and the actual architectural realisation may turn out to differ widely. To bridge the widening gap between the experts and the users, clients and government officials, research concerning architectural representation is needed. In 1990 a Dutch scientific journal, issued by The Delft University, published an illustrated report of research findings under the title Overdracht en Simulatie (Information and Simulation). The article gives a description of a pilot study carried out by a research team (Van Der Does, Van Haaften, Kegel and Vrins) to assess and evaluate various presentation techniques used in architecture. This study was just a first step towards a more detailed follow-up study, to which I shall come back after having given a summarized view of the pilot study.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	20c1
authors	Alavalkama, Ilkka
year	1993
title	Technical Aspects of the Urban Simulator in Tampere University of Technology
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 35-46
summary	The colour video recording Urban Simulator in TUT was built very early compared with the development of video systems. A contract for planning the simulator electronics, mechanics and camera systems was made in january 1978 with two TUT students: Jani Granholm (computer science and engineering) and Ilkka Alavalkama (machine design and automation). Ease of control and maintenance were asked by side of ”human movement inside coloured small-scale architectural models”. From the beginning, all components of the system were carefully tested and chosen from various alternatives. Financial resources were quite limited, which lead to a long building process and to self-planned and produced mechanical and electronical elements. Some optical systems were constructed by using elements from various manufacturers.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	3653
authors	Alshawi, M. and Budeiri, M.J.
year	1993
title	An Integrated approach for 3D simulation of construction sequence
source	The Int. Journal of Construction IT 1(2), pp. 35-46
summary	In order to eliminate design-related problems and to ease planning difficulties, a new integrated approach is required to manage and present design and construction information. This paper examines the feasibility of integrating design and construction scheduling information produced by 'industry standard' software. It describes the structure of a prototype which has been developed to generate a 3D simulation model for the construction sequence by integrating a CAD package with a project planning software. This study aims at establishing an integrated approach to communicate construction planning graphically to users (designers or construction managers) prior to construction in order to enhance the efficiency of the design/construction process.
series	journal paper
last changed	2003/05/15 21:45

_id	86dc
authors	Aouad, G., and Price, A.D.F.
year	1993
title	An integrated system to aid the planning of concrete structures: introducing the system
source	The Int. Journal of Construction IT1(2), pp.1-14
summary	This paper reports on the development at Loughborough University of a CAD-based integrated model to aid the planning of in-situ concrete structures. The system development started after a review of the planning models currently available and after a detailed questionnaire survey undertaken amongst the top UK and US contractors on the current status of planning techniques and information technology. The main aim of this system is to automate the planning process of in-situ concrete structures using data generated by CAD systems. So far, the integration of a CAD system (AutoCAD 10) and a computerized scheduling system (Artemis 2000) has been achieved on a typical IBM-PC. This enables the generation of network plans using AutoCAD which are then automatically transferred to the Artemis system for time and cost analyses.Traditionally, construction planners are faced with many conventional drawings and documents which are used to re-extract information relevant to their planning processes. Such an approach can be very inefficient as it involves data double-handling and is often error prone. In addition, current computerized construction planning applications are little more than the automation of manual formulations of plans. For example, data are fed into the planning system and computations are performed using either CPM (Critical Path Method) or PERT (Programme Evaluation and Review Technique). However, data relating to the planning process such as activity lists, resources requirements and durations are not automatically generated within the system. It would thus seem logical to devise a CAD-based integrated planning model which accepts data in its electronic format and involves some integration of the traditional planning approach. This paper introduces the proposed CAD-based integrated planning model and describes its different components. In addition, it discusses the system functional specifications and summarizes the main benefits and limitations of such a model.
series	journal paper
last changed	2003/05/15 21:45

_id	ee23
authors	Bille, Pia
year	1994
title	A Study of Color
doi	https://doi.org/10.52842/conf.ecaade.1994.185
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 185-190
summary	Color courses are traditionally based on exercises carried out with either water color or colored paper. Use of the computer as a tool for teaching color theory and analyzing color in architecture was the topic of a course given at the School of Architecture and Planning at the State University of New York at Buffalo, USA where I was an exchange faculty in the academic year 1993/94. The course was structured into 3 topics: color theory, color perception and application of color.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	6858
authors	Bosselmann, Peter and Gilson, Kevin
year	1993
title	Visualizing Urban Form
source	Endoscopy as a Tool in Architecture [Proceedings of the 1st European Architectural Endoscopy Association Conference / ISBN 951-722-069-3] Tampere (Finland), 25-28 August 1993, pp. 9-30
summary	This article is about the use of visual simulation by urban designers. We explore briefly the history of simulation from its origins in the 1960s in the United States, explain guidelines for its application in urban design and planning projects, and discuss in greater detail how new simulation techniques might be integrated into design instruction and practice.
keywords	Architectural Endoscopy
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	4abb
authors	Carlson, Christopher
year	1993
title	Describing Spaces of Rectangular Dissections via Grammatical Programming
source	CAAD Futures ‘93 [Conference Proceedings / ISBN 0-444-89922-7] (Pittsburgh / USA), 1993, pp. 143-158
summary	For the description of design spaces, grammatical programs offer several advantages over conventional grammars: (1) they integrate rewrite rules with more general non-deterministic functions, (2) they permit a range of programming styles from purely declarative to purely procedural, (3) they can describe spaces Of constrained, parametric designs, and (4) they permit design space descriptions to be developed modularly. We demonstrate these features of grammatical programming by way of a simple example that generates spaces of rectangular dissections.
keywords	Generative Systems, Grammars, Design Spaces, Functional Logic Programming
series	CAAD Futures
last changed	1999/04/07 12:03

_id	eaea2005_000
id	eaea2005_000
authors	Dechène, Sigrun und Manfred Walz (Eds.)
year	2006
title	Motion, E-Motion and Urban Space
source	Proceedings of the 7th European Architectural Endoscopy Association Conference / ISBN-10: 3-00-019070-8 - ISBN-13: 978-3-00-019070-4, 260 p.
summary	Simulating the development and the image of architecture and urban design means to show how the environment of the future and the living conditions could develop. At the same time it is part of our task to explain our work to local people and to the public and to passion skills in methods, instruments and knowledge in planning to the next generation of architects, planners and last but not least to discuss and to renew them once more for ourselves. Our aim was also to reflect what we have done since starting the look through the key-hole of endoscopy. Meanwhile this look has been completed since the beginnings in 1993 much more by computer and monitor. It is not the question to take the endoscope or the computer as a methodical and instrumental approach. Nowadays we normally decide to take the endoscope and the computer. In preparing the conference and the workshop we thought that this should now also be the moment not only to inform each other and the participants on methods, tools and best practices in simulating and designing the environment but also to focus on the social and human consequences of perception, movement and use the present urban spaces and the urban space in future. So we proposed the theme “MOTION, E-MOTION and URBAN SPACE” and we invited a scientific expert in experimental psychology to give us some serious reflections and one or another hint on our research themes and methods. The contributions and discussions in the conference showed that the proposal has not only been accepted but has also been completed and enriched especially concerning the theme urban space, it’s processes of usage and it‘s atmosphere. Also in the themes of endoscopy and the research on modelling urban spaces and architecture, meanwhile nearly “traditional” ones, remarkable results were presented and discussed. A very important point of contributions and the following discussions was how to present our subjects to the interested public and to improve our own internal exchange. An object could be to enforce the research tasks in researching together even more.
series	EAEA
email
more	http://info.tuwien.ac.at/eaea
last changed	2008/04/29 20:46

For more results click below: