Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 332

Reformat results as: short short into frame detailed detailed into frame

_id	065b
authors	Beitia, S.S., Zulueta, A. and Barrallo, J.
year	1995
title	The Virtual Cathedral - An Essay about CAAD, History and Structure
doi	https://doi.org/10.52842/conf.ecaade.1995.355
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 355-360
summary	The Old Cathedral of Santa Maria in Vitoria is the most representative building of the Gothic style in the Basque Country. Built during the XIV century, it has been closed to the cult in 1994 because of the high risk of collapse that presents its structure. This closure was originated by the structural analysis that was entrusted to the University of the Basque Country in 1992. The topographic works developed in the Cathedral to elaborate the planimetry of the temple revealed that many structural elements of great importance like arches, buttresses and flying buttresses were removed, modified or added along the history of Santa Maria. The first structural analysis made in the church suggested that the huge deformations showed in the resistant elements, specially the piers, were originated by interventions made in the past. A deep historical investigation allowed us to know how the Cathedral was built and the changes executed until our days. With this information, we started the elaboration of a virtual model of the Cathedral of Santa Maria. This model was introduced into a Finite Elements Method system to study the deformations suffered in the church during its construction in the XIV century, and the intervention made later in the XV, XVI and XX centuries. The efficiency of the virtual model simulating the geometry of the Cathedral along history allowed us to detect the cause of the structural damage, that was finally found in many unfortunate interventions along time.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_43.htm
last changed	2022/06/07 07:54

_id	a43d
authors	Kim, Inhan
year	1994
title	Unified Data Organization and Management in an Integrated Design Environment
doi	https://doi.org/10.52842/conf.ecaade.1994.x.k7n
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 254
summary	The architectural design process is very complex and it is not easily confined to a single design environment. As the design process gets more complex due to the technological advances in building materials and construction methods, an integrated design system becomes a central design issue. To have an integrated design system, all applications should be integrated in a unified environment within which there should be a data structure to facilitate an effective data communication among the various design stages and data control facility to seamlessly connect all these applications. A primary purpose of this work is to suggest an object oriented architectural design environment for the essential part of the seamless environment for designing a building. Within the object-oriented design environment, a unified data model and detailed data control module have been implemented to seamlessly connect all these applications. The unified data model organizes the structure of the design data to keep the design consistent throughout the design and construction process. It also helps to do effective data communication among the various design stages to ensure quality and time saving in the final construction of the building. The data management module supports the consistent and easy mechanisms in controlling the data representation through the inter-connected modules. It is also responsible for creating, maintaining, and viewing a consistent database of the design description. In the suggested design environment, each architectural element partially describes the model and individual elements are aggregated hierarchically. Some parts of the projection are defined and other can be inherited from above. Also, creation of an improved or new design element can easily be accommodated in the environment. The integrated database in the suggested environment is the basis by which design data can be shared among the design tools of the design environment. The database organizes the design description within each representation, correlates equivalent descriptions across the representations, and attempts to maintain these correspondences as the design incrementally evolves.
series	eCAADe
last changed	2022/06/07 07:50

_id	ecaade2021_103
id	ecaade2021_103
authors	Hussein, Hussein E. M., Agkathidis, Asterios and Kronenburg, Robert
year	2021
title	Towards a Free-form Transformable Structure - A critical review for the attempts of developing reconfigurable structures that can deliver variable free-form geometries
doi	https://doi.org/10.52842/conf.ecaade.2021.2.381
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 381-390
summary	In continuation of our previous research (Hussein, et al., 2017), this paper examines the kinetic transformable spatial-bar structures that can alter their forms from any free-form geometry to another, which can be named as Free-form transformable structures (FFTS). Since 1994, some precedents have been proposed FFTS for many applications such as controlling solar gain, providing interactive kinetic forms, and control the users' movement within architectural/urban spaces. This research includes a comparative analysis and a critical review of eight FFTS precedents, which revealed some design and technical considerations, issues, and design and evaluation challenges due to the FFTS ability to deliver infinite unpredictable form variations. Additionally, this research presents our novel algorithmic framework to design and evaluate the infinite form variations of FFTS and an actuated prototype that achieved the required movement. The findings of this study revealed some significant design and technical challenges and limitations that require further research work.
keywords	Kinetic transformable structures; finite element analysis; form-finding; deployable structures; Grasshopper 3D; Karamba 3D
series	eCAADe
email
last changed	2022/06/07 07:50

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	0726
authors	Kadysz, Andrzej
year	1994
title	CAD the Tool
doi	https://doi.org/10.52842/conf.ecaade.1994.x.k7r
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 212
summary	What is the role of CAAD as a tool of architectural form creation ? We used to over-estimate the role of computer as significant factor of design process. In fact it serves only to produce technical documentation and to visualise designed buildings. We usually use CAAD to record ideas, not to create designs. We use it like more complex pencil. But it is unsuitable for conceptual design , with imperceptible influence on idea definition. Its practical usefulnes is limited. I would like to consider and find out reasons of that state, present some conclusions and ideas on computer aided architectural form creation. Many tools were invented to extend posibilities of human body or intellect. Microscop and telescop are extensions of human eye. Which organ is extended by computer (especially by CAAD)? CAAD with high developed function of visualising of the object beeing designed seems to be an extension of architect's imagination. It is beeing used to foresee visual efects, to check designed forms, to see something what we are not able to imagine. It performes the role of electronic modeler. Real model and virtual model - the medium of presentation is diferent but ways of using them are similar . Dislocation of place where we build model is not a big achievement, but potential possbilities of CAAD in modeling are almost unlimited (?). What are special features of CAAD as a modeling tool? First we have to consider what is indispensible when building a model: to embody idea. To do this we need space, substance and tools. In architectural design practice space is a real site with definite climate, neigbourhood, orientation. Substance that we shape is an archiectural form composed of many difrent elements: walls, windows, roof, entry, ... , proportions, rhythm, emotions, impresions... The tool is: our knowledge, imagination, talent, experience, norms, law and drawing equipment. Working with the computer, making virtual model, we have many of mentioned elements given in structure of CAAD program and interpreted by it. But many of them have different character. Making traditional dummy of building we operate on reality which is manually accessible. In case of computer model we operate on information. Space, substance and tool (- program) are informations, data. Human being is not an abstract data processor, but creature that lives non stop in close, direct, sensual contact with nature. By this contact with enviroment collects experiences. Computer can operate on digital data that is optionally selected and given by user, independent upon enviromental conditions. Usually architecture was created on basis of enviroment, climate, gravity. But these do not exist in CAAD programs or exist in the symbolic form. Character of these conditions is not obvious. We can watch demeanour of objects in gravity but it can be also antigravity. In theory of systems everything is considered as a part of biger system. In "virtual" reality (in computer space) we deal with accurences which are reduced to abstract level, free upon terms or connections. We work with our CAAD software using geometric space whithout any other principle.
series	eCAADe
last changed	2022/06/07 07:50

_id	20ab
authors	Yakeley, Megan
year	2000
title	Digitally Mediated Design: Using Computer Programming to Develop a Personal Design Process
source	Massachusetts Institute of Technology, Department of Architecture
summary	This thesis is based on the proposal that the current system of architectural design education confuses product and process. Students are assessed through, and therefore concentrate on, the former whilst the latter is left in many cases to chance. This thesis describes a new course taught by the author at MIT for the last three years whose aim is to teach the design process away from the complexities inherent in the studio system. This course draws a parallel between the design process and the Constructionist view of learning, and asserts that the design process is a constant learning activity. Therefore, learning about the design process necessarily involves learning the cognitive skills of this theoretical approach to education. These include concrete thinking and the creation of external artifacts to develop of ideas through iterative, experimental, incremental exploration. The course mimics the Constructionist model of using the computer programming environment LOGO to teach mathematics. It uses computer programming in a CAD environment, and specifically the development of a generative system, to teach the design process. The efficacy of such an approach to architectural design education has been studied using methodologies from educational research. The research design used an emergent qualitative model, employing Maykut and Morehouses interpretive descriptive approach (Maykut & Morehouse, 1994) and Glaser and Strausss Constant Comparative Method of data analysis (Glaser & Strauss, 1967). Six students joined the course in the Spring 1999 semester. The experience of these students, what and how they learned, and whether this understanding was transferred to other areas of their educational process, were studied. The findings demonstrated that computer programming in a particular pedagogical framework, can help transform the way in which students understand the process of designing. The following changes were observed in the students during the course of the year: Development of understanding of a personalized design process; move from using computer programming to solve quantifiable problems to using it to support qualitative design decisions; change in understanding of the paradigm for computers in the design process; awareness of the importance of intrapersonal and interpersonal communication skills; change in expectations of, their sense of control over, and appropriation of, the computer in the design process; evidence of transference of cognitive skills; change from a Behaviourist to a Constructionist model of learning Thesis Supervisor: William J. Mitchell Title: Professor of Architecture and Media Arts and Sciences, School of Architecture and Planning
series	thesis:PhD
last changed	2003/02/12 22:37

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	01ef
authors	Cajati, Claudio
year	1994
title	From Real to Virtual Building Behaviours: “Expert Hypertexts” in the Design Studio
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w5v
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 243
summary	Starting from the refuse of the most impressive, on fashion performances of the so called Virtual Reality, I hypothize for the architectural education of the next decade a strategy based on the following scenario: ()- as regards the form of the virtual studio, it should result from the synergy of many moments and opportunities: telematic interaction; students working at home; students training through assistant design tools in the university venue, with or without teachers’ supervision; informal discussion teachers-students about such training; traditional teachers’ lectures as introductions or resumes; (-) as regards the function of the virtual studio, it should realize the awareness of building behaviours, by teaching architectural design through the critical analysis of positive and - even more important - negative “precedents”.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ee50
authors	Campioli, Andrea and Talamo, Cinzia
year	1994
title	IPERTEC: Hypertext Information System for Dry-assembled Building Elements
doi	https://doi.org/10.52842/conf.ecaade.1994.x.b3p
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 239
summary	The experience presented concerns the study of advanced information tools for design disciplines teaching. The objectives pursued are: on one hand self-teaching according to methods that go beyond traditional technical manuals and specialized texts and that give a systemic view of the strict connections between technological culture and design poetics; on the other hand assistance during design exercises as far as references assumption and deep analysis of technical and architectural topics are concerned. The result of the research is the information system Ipertec, a hypertext handbook with didactic purposes allowing students to approach executive techniques of dry assembly.
series	eCAADe
last changed	2022/06/07 07:50

_id	2292
authors	Kühn, Christian and Herzog, Marcus
year	1994
title	On the Role of Hypermedia in Architectural Design Education
doi	https://doi.org/10.52842/conf.ecaade.1994.115
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 115-120
summary	Teaching architectural design is not primarily concerned with presenting a body of knowledge analytically, but rather with influencing the way students act in a design situation. Previous design cases play an important part in this process, as they provide students with sets of objectives and corresponding solution patterns. Nevertheless, one of the main problems with using precedents in the design studio is that students take them rather as models to be copied than as starting points for their own research. To overcome this problem, the representation of design cases has to be improved. Our thesis is that in architectural design the structure of a case base of design precedents relies to a large extent on the various, and often conflicting, interpretations of precedents that are provided by architectural theory and discourse. Within a theory of design where exploration is the dominant strategy, we propose a method of using design cases and design theories in an integrated way. Through the use of hypermedia as a medium for representation of design cases, the process of looking for information can be based on the same metaphor as the design process itself.
series	eCAADe
last changed	2022/06/07 07:52

_id	6b1d
authors	Porada, Mikhael
year	1994
title	Architectural Briefing Data Representation and Sketch Simulation Computer Environment
doi	https://doi.org/10.52842/conf.ecaade.1994.055
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 55-59
summary	Reflection about the architectural programme starts with the analysis of its writing, its "style" which bears not only the "griffe" of the programmer but as well the structure, methodology, codes of reading, etc. particular to a programming approach. The programme structure corresponds in most cases to the different levels in the text's format and the composition modes of representing data and their relations. The choice made can either facilitate or impede the reading as interpretation of the programme. The programmer’s aim should be to open the text to reading towards a "synthetic schematic" summary, a sort of cognitive threshold which allows the reader to understand both the client's objectives and the designer's intentions enhanced by his experience. Articulating a designer's experience means focusing on his knowhow and memory. The designer's recollected knowledge and heuristic approaches to the solution of a basic design problem - types, his readings and spatial evaluations permanently feed the knowhow. It is important for the architect to have access to past examples, to the collective memory of his workplace, and a repertoire of readings, notes, sketches, influences and citations. It is therfore equally important that a computer environment also have a multimodal "architect's memory" or "project memory" module in which different forms of representation are classified, and made accessible as memory components. It is also necessary to have the possibility to access at any moment in an interactive manner to the recomposition, addition and adaptation of these mnemonic components. The information coming from the programme, classified as descriptive, prescriptive and quantitative types of data, must be able to be interrogated in different modes of representation : text, matrices, nets, diagrams, and so on, so that the pertinent information can be extraded at any given design process stage. Analysis of competition programmes show that often the description of an activity, for example, the Great Stadium competition in Paris, is described by several pages of text, a circulation diagram with arrows and legend, a topological proximity diagram with legend and as table activity - areas . These different representations, which are supposed to be complementary and give the most pertinent view of the client needs, show in fact after analysis, many description problems, incoherance, and which result in a reading difficulty.
series	eCAADe
last changed	2022/06/07 08:00

_id	cbed
authors	Yakubu, G.S.
year	1994
title	Maximising the Benefits of CAD Systems in Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u8n
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 228
summary	The positive impact of Computer Aided Design (CAD) in professional architectural practice has been in focus in recent times but relatively little has been written on its significance in the education of the contemporary architect. It is common knowledge that the profession of architecture is currently undergoing enormous strains as it battles to keep abreast of trends and developments in a period of series of rapid advancement in science, technology and management (RIBA, 1992). Whilst attempts are being made to redress the shortcomings of the profession in the above context, the requirements for architectural education are yet to forge a coherent strategy for the implementation of CAD/IT in the curriculum of schools of architecture. In almost every other field, including engineering, medicine and the humanities, computing application to problem-solving and decision-making is seen as a way forward as we move into 21st century. Architectural education must integrate CAD/IT into the teaching of core modules that give the architect distinctive competence: studio design. That is one of the best ways of doing justice to the education of the architect of today and the future. Some approaches to the teaching of CAD in schools of architecture have been touched upon in the recent past. Building upon this background as well as an understanding of the nature of design teaching/learning, this paper examines ways of maximising the benefits of CAD systems in architectural education and of bringing computer aided designing into the studio not only to enhance design thinking and creativity but also to support interactive processes. In order to maximise or optimise any function, one approach is to use the hard systems methodology which utilises analytic, analogic and iconic models to show the effect of those factors which are significant for the purposes being considered. The other approach is to use the soft systems methodology in which the analysis encompasses the concept of a human activity system as a means of improving a situation. The use of soft systems methodology is considered more appropriate for dealing with the problem of design which is characterised by a flux of interacting events and ideas that unroll through time. The paper concludes that the main impediment to maximising the benefits of CAD systems in architectural education is not only the inappropriate definition of the objectives for the implementation of CAD education but also that the control subsystems are usually ill-structured and relatively poorly defined. Schools must attempt to define a coherent and consistent policy on the use of CAD systems as an integral part of studio design and evolve an in-house strategic and operational controls that enable the set objectives to be met. Furthermore, it is necessary to support the high level of productivity from CAD systems with a more efficient management system, especially in dealing with communication, data sharing via relational database, co-ordination and integration. Finally, the use of soft systems methodology is recommended as the way forward to optimising CAD systems in design education as it would provide continuous improvements while maintaining their productive value.
series	eCAADe
last changed	2022/06/07 07:50

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	0ecc
authors	Anh, Tran Hoai
year	1994
title	APPLICATION OF FULL-SCALE MODELLING IN VIETNAM: AN OUTLINE FOR DISCUSSION
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 59-70
summary	This paper discusses the possibility of applying full-scale modelling in Vietnam, a non-western so called developing country. It deals with two main questions: 1) Is the application of full-scale modelling to be restricted to the West only? 2) what are the possibilities, constraints and fields of application - with attention to the methodological validity and technical solution for full-scale modelling in Vietnam? It is argued that since full-scale modelling is based on people-environment interaction, it should, in principle, apply to studies about people–environment relation anywhere on earth. On the methodological validity, it is discussed that application of full-scale modelling in Vietnam faces similar methodological problems as encountered in European applications (such as people's behaviour in experiment, ability to understand the abstraction of models, etc.) although at another level as this paper will make clear. However, it would be needed to design a modelling kit that is of low costs and adapted to the availability of local materials and suitable for the climatic condition of Vietnam. Two fields of application are projected as most applicable in Vietnam: modelling in architectural education and research investigation. Application for user's participation in the design process will depend on the development of building policy in the country.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
last changed	2004/05/04 11:00

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	e751
id	e751
authors	Clayton, M.J., Kunz, J.C., Fischer, M.A. and Teicholz, P.
year	1994
title	First Drawings, Then Semantics
doi	https://doi.org/10.52842/conf.acadia.1994.013
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 13-26
summary	The Semantic Modeling Extension (SME) prototype implements a unique approach to integrated architectural CAD that places the drawing act first in the design process. After drawing a design idea using a computer graphic system, the designer interprets the design, providing semantic content to the graphic entities. An interpretation expresses the meaning of the design with respect to a particular issue, such as structural sufficiency, energy consumption, or requirements for egress, and provides reasoning to evaluate the design addressing that issue. A design may have many interpretations to express the multiple issues that are relevant in a design project. The designer may add or delete interpretations of the design as issues change during the course of the project. Underlying the SME prototype are the concepts of form, function and behavior. In the prototype, evaluation of a design is done by deriving behavior from the graphically represented forms and relating the behavior to stated functions or requirements. The concepts of interpretations and form, function and behavior together establish a virtual product model for design. In contrast to component based approaches to product modeling that tightly bind form representations to their behavior and function, a virtual product model allows the designer to manipulate the relations among these three descriptors of a design, and thus manipulate the semantics of the design entities. By distinguishing between the act of proposing a design by drawing the conceived form and the act of assigning meaning to the form, the virtual product model approach supports both graphic thinking for design synthesis and symbolic reasoning for design evaluation. This paper presents a scenario of the use of the SME prototype in building design; provides an analysis of the design process and computational support described in the scenario; contrasts a virtual product model approach with a component-oriented product model approach; describes the software implementation of SME; and presents implications and conclusions regarding design process and technical integration.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	64c5
authors	De Mesa, A., Monedero, J., Redondo, E. and Regot, J.
year	1994
title	From Image Space to Model Space and Back Again
doi	https://doi.org/10.52842/conf.ecaade.1994.060
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 60-68
summary	The paper describes in detail a process of work consisting of merging a virtual model into a real image. This process implies three different kinds of operations: geometric restoration of the real scene, in 3D, from a photograph, rendering a virtual model under similar conditions as the photograph, and merging of the rendered image with the original image. The paper empasises quality and visual precision of results together with a semiautomatization of the entire process. It also refers critically these three different groups of operations to their theoretical background. It concludes with an evaluation of the work from the point of view of architectural visual analysis and from the point of view of architectural visual analysis and from the point of view of a general design methodology.
series	eCAADe
last changed	2022/06/07 07:56

_id	627a
authors	Eddison, Tony
year	1994
title	An Investigation of the Concept of Designer Style and its Relevance to The Design of CAD Systems
doi	https://doi.org/10.52842/conf.ecaade.1994.x.t0t
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 213
summary	Underlying the notion of style is the basic premise that all designers are not the same and that the manner in which any designer works through a design problem towards a proposed solution may be qualitatively different from other designers. If, through this work, this is shown to be the case and the concept of designer style can be meaningfully discussed then any model of the design process and any system or product relating to this model must allow for such variations at the level of the group or individual. This is the starting point of this investigation of the concept of designer styles.
series	eCAADe
last changed	2022/06/07 07:50

For more results click below: