Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 363

Reformat results as: short short into frame detailed detailed into frame

_id	e933
authors	Herbert, Daniel M.
year	1994
title	A Critical Analysis of Design Processes and Media: Applications for Computer-Aided Design
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 133-146
doi	https://doi.org/10.52842/conf.acadia.1994.133
summary	Architectural designers take part in two complex cultures: a parent culture that affects their overall view of the world, and an architectural subculture that orders the details of their work. With assistance from writings in contemporary philosophy, this paper analyzes aspects of both the parent culture and the subculture as they concern design processes and media. The analysis uncovers assumptions that normally assign such processes and media to a secondary role in which they to a secondary role in which they serve only as neutral and transparent skills. By constructing a set of alternative assumptions, the paper proposes a new, primary, role for design processes and media - a role that enables them to act as intentional and substantial generators of form. These alternative assumptions challenge deeply held beliefs, but examples show that when they are employed experimentally in computer-aided design, they reveal new possibilities unique to digital processes and media.
series	ACADIA
last changed	2022/06/07 07:49

_id	ddss9464
id	ddss9464
authors	McCartney, Kevin and Ismail, Ashraf Lotfy R. M.
year	1994
title	A Tool for Conceptual Design Evaluation Based on Compliance with Supplementary Planning Guidance and Local Planning Policies
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The need has been established for a computer based decision support tool to use during the conceptual stages of architectural design. The main functions are being designed in order to check design compliance with the requirements of local planning authorities; with regards to building size, height, plot ratios, circulation and accessibility, and the preservation of natural features on site. The measures to determine proper evaluation will be based upon site-development briefs, and design guides produced by the local planning authorities. This tool is being developed to operate under AutoCAD environment; the construction industry standard computer aided design software, following standard layering convention, integrated command lines, and pull-down menus. It will also provide many functions for editing two and three dimensional drawings specifically for the environmental analysis tasks. In addition to the common graphical output of Aut0CAD; i.e. plans, elevations and three dimensional models, the tool will generate textual analysis of the design in report format to use as part of the Environmental Impact Statement of proposed development. The speculative tool's functions will be based upon the result of two types of field studies. First, interviews and questionnaires will be carried out tailor-made for architects and planners of both private and public sectors. These will cover issues related to the performance of Computer Aided Architectural Design applications with regard to the evaluation of design schematics, and decision-making for the production of materials for environmental statements. Second, field observation will be carried out to observe the concerned professionals as decision-makers while assessing building design proposals. A prototype will be designed and then tested against the expectations of the tool designer, then the tool performance will be evaluated by a team of professionals participated in the field studies. A critical analysis of the prototype design methodology and the concluding study findings will be documented as part of a postgraduate research thesis to be completed in June 1995.
series	DDSS
last changed	2003/08/07 16:36

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	e807
authors	Anadol, Z., and Akin, O.
year	1994
title	Determining the impact of cad drafting tools on the building delivery process
source	The Int. Journal of Construction IT 2(1), pp.1-8
summary	Computer aided design is intended to change the way design and construction are carried out. at a minimum, this implies savings realized in terms of time spent and improvement of the quality of designs produced. to test this idea, we hypothesized that computer aided drafting and design operations may be instrumental in reducing the number of change orders issued and help control cost overruns by improving the accuracy of construction documents. we compared change orders in projects designed in the conventional media against ones developed with computers. we found that there is evidence supporting our hypothesis. furthermore, in the process of investigating this question, we found that computer applications to improve the management of existing building information (as-built drawings, building system related information, and the like) represent even more critical needs than those that can reduce change orders through more accurate design drawings.
series	journal paper
last changed	2003/05/15 21:45

_id	ddss9413
id	ddss9413
authors	Branki, Cherif
year	1994
title	Communicative Acts in Cooperative Architectural Design Environments
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The purpose of this paper is to present a scheme, that can be used to support the communication process in cooperative design. Computational aids for design have largely been for a designerworking by himself/herself. These aids have also been supplemented by the widespread use of artificial intelligence approaches. However, design is so complex, and very rarely acted upon by a single designer but many more working towards the same aim. This involves a new paradigm in which designers need to cooperate with each other using a computational medium. A protocol analysis in cooperative design has been carried out and technological support has been proposed.Cooperative design becomes an important paradigm for the next generation of intelligent computer aided design systems. It will be conducted in many forms among several designers and willrequire the support of advanced communication facilities beyond the "passive" transmission of data and messages. Technological advances in communication networks have opened up new ways for cooperative design interaction across several processes of cooperation among designers, designers and computer aided design systems, computer aided design systems and knowledge based systems, and knowledge based systems themselves. In cooperative design environments, aunit of communication among designers is the transfer of a message from one designer (a sender) to another (a receiver). The aim of such communication is to provide the receiver with some information or to have the receiver take certain actions. Inspired by the speech act theory, a branch of the philosophy of language and linguistics, such a unit is called a communicative act. By analogy to architectural design, a communicative act is a performing act in designers communication.
series	DDSS
email
last changed	2003/08/07 16:36

_id	67fd
authors	Brown, Paul
year	1994
title	Hype, Hope and Cyberspace -or- Paradigms Lost Pedagogical Problems at the Digital Frontier
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 7-12
doi	https://doi.org/10.52842/conf.ecaade.1994.007
summary	A number of critical issues and problems have evolved over the past 20 years as computers have been introduced into the art and design curriculum. This essay compares the pragmatic demands of tool usage and the metaphorical emulation of traditional media with the need for examination of fundamental issues.
series	eCAADe
last changed	2022/06/07 07:54

_id	01ef
authors	Cajati, Claudio
year	1994
title	From Real to Virtual Building Behaviours: “Expert Hypertexts” in the Design Studio
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 243
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w5v
summary	Starting from the refuse of the most impressive, on fashion performances of the so called Virtual Reality, I hypothize for the architectural education of the next decade a strategy based on the following scenario: ()- as regards the form of the virtual studio, it should result from the synergy of many moments and opportunities: telematic interaction; students working at home; students training through assistant design tools in the university venue, with or without teachers’ supervision; informal discussion teachers-students about such training; traditional teachers’ lectures as introductions or resumes; (-) as regards the function of the virtual studio, it should realize the awareness of building behaviours, by teaching architectural design through the critical analysis of positive and - even more important - negative “precedents”.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ddss9427
id	ddss9427
authors	Engelen, Guy and White, Roger
year	1994
title	A Strategic Planning and Policy Decision Support Tool for Urban Regions
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper we present a Decision Support System developed to assist urban designers, planners and policy makers to explore and evaluate possible urban layouts and their growth patterns. Thecore of the system consists of a modelling shell allowing the user to specify cellular automata based models of urban and regional systems. These models capture the effect of local spatial processes in which the use, or desired use of each parcel or cell of land is determined partly by institutional and environmental factors, and partly by the activities present in its neighbourhood. Since each cell affects every other cell within its neighbourhood, a complex dynamic emerges. Unlike conventional cellular automata, the models are defined with a large neighbourhood --over a hundred cells-- a relatively large number of states --more than a dozen in some applications-- representing socio-economic and natural land-uses. The approach permits the straightforward integration of detailed physical, environmental, and institutional constraints, as well as including the effects of the transportation and communication infrastructure. These models thus permit a very detailed representation of evolving spatial systems. The current version of the system represents urban areas as consisting of up to 10.000 interacting zones, each roughly the size of an individual city block. These models are easy to build and apply, yet empirical tests show that they produce realistic simulations of urban land use dynamics. Consequently, they are well suited to form the heart of the DSS, which provides the user with a number of tools for exploration,analysis and evaluation of alternative futures of the system as they result from policy interventions that are imposed by means of what-if experiments and scenario analysis. For example, the DSS isable to identify areas in which pressure for change in land use restrictions may become critical under particular development strategies. In the DSS, the modelling shell is coupled to a simple,custom-built GIS. In the stand-alone application of the DSS, this stores the detailed geographical qualities of the area being modelled, and allows basic overlay manipulations. It also displays theresults of the model while the simulation proceeds. Alternatively, the GIS can serve as aninterface to more elaborate, commercial GIS systems.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9448
id	ddss9448
authors	Kane, Andy and Szalapaj, Peter
year	1994
title	Intuitive Analysis as Mediator Between Concept and Representation
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Representation in Computer Aided Architectural Design Systems has to date largely focused on the presentation of the end product of design activity, namely the ultimate built form. In thisrespect, 3-dimensional representations traditionally associated with CAAD visualization have relied heavily upon verisimilitude for their efficacy, and have therefore necessitated high levels of dimensional accuracy together with exhaustive description, both of which are absent in the early stages of design formulation. This paper investigates the desired structure of a computational design formulation system which is based, not upon the representation (or presentation) of ultimate form, but instead upon the representation of architectonic ideas resident in the designer's mind, which are central to the organization and generation of proposals. These ideas are of two kinds: conceptual generators, both poetic and architectonic, and the organizational parti or schematic proposals, which embody them. The representation of ideas rather than end form has two primaryobjectives. Firstly, it enables the designer's realization and clarification of concept or parti, and secondly, but most importantly, it enables the designer to critically assess these ideas in relation tothe contextual situation and brief. The computational representation must be structured in a manner which supports the designer's intuitive critical assessment of it, to in turn induce a modification and development of the initial design ideas. Repeated transformation, representation, and intuitive analysis, can then continue in a cyclical manner until an end proposal is achieved. Intuitive analysis, which becomes the mediator between idea and representation, is itself computationally supported by the dual methodologies of comparative and modal superimposition. Superimposition of previous with present representation (either in two or three dimensions)enhances comparative assessment of design developments. Modal analysis, on the other hand, facilitates the superimposition of schematic representations of modes of design thought (circulationpattern with volumetric arrangement, say) in order to intuitively assess their interaction or conflict.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9456
id	ddss9456
authors	Kubiak, Bernard and Korowicki, Antoni
year	1994
title	Identification And Analysis of the Recreational Behaviour Forms and the Needed Recreational Space Using the Integrated Spatial and Object-Oriented Gis: Concepts and Statements
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper is concerned with how to measure and investigate changes in the recreational behaviour and the required recreational space in Polish seaside recreational areas in last few years. Spatial information is an integral part of the identification and analysis of recreational behaviour and required recreational space. We postulate, therefore, that spatial information should be fully incorporated in integrated object-oriented GIS and Decision Support Technology. We argue in this paper that the existing theoretical approaches with their descriptive and technical basis do not offer directions for its application and evaluation. They do not seek to explain the processes undergone by spatial information, nor define appropriate data models. New approaches to GIS use object-oriented structures and expert systems concepts, and they will become increasingly helpful in understanding GIS. It is not unreasonable to expect that the most important issue is to use a data model or object-oriented models which closely represent the user's concept of the geographic object for representing spatial phenomena. We have discovered that most Polish users in this field are unable to collect the data they require directly. Thus they have to use methods and techniques, which cannot be found in GIS such as SWOT analysis. According to our experiences, the identification and analysis of the recreational behaviour and the required recreational space should be defined as a system approach where: (i) recreational space requires an object, (ii) state of recreational space is defined by the set of values of recreational space features, and (iii) the utility of the recreational space is defined by a set of features. The identification and analysis of the recreational behaviour in the presented approach are based on the features/utilities matrix of the recreational space and the computer map. The development of such a system needs many organizational changes. It is shown that in many applications organizational rather than the technical aspects of GIS determine their future and open the way to new spatial analytical techniques.
series	DDSS
last changed	2003/08/07 16:36

_id	79f8
authors	Rieber, L.
year	1994
title	Computers Graphics, and Learning
source	Brown & Benchmark, Madison
summary	The first of the topics begins with an overview of instructional computer graphics. This leads into an overview of the status of instructional visual research including discussions on visual perception, visual cognition, and theories on storing visual information in short-term and long-term memory. More practical application information is found in the next few chapters covering when and how static and animated graphics should be integrated into computer based instruction. The book concludes with a consideration of the role visuals play with multimedia. The useful information of each chapter is delivered with a cautious and wise nature. Rieber introduces his book with the first principle of instructional graphics, which I found to be very insightful. It reads, "There are times when pictures can aid learning, times when pictures do not aid learning but do no harm, and times when pictures do not aid learning and are distracting." The general premise throughout the book is that learning is paramount and should take center stage. He further warns the instructional designer about becoming "technocentric" (this is where technology dictates decision making) and recommends that media decisions not be made untilother instructional decisions are made. Again and again, from chapter to chapter, the reader is reminded of this underlying premise which made this book particularly effective. Another strength was the comprehensive nature of the book. There was an excellent balance of theory, research, and application to ensure the reader will gain the knowledge for appropriate integration of graphics into instructional materials. The theoretical information covers the role of visuals in communication and education, quoting many research sources for validation. There is an overview of three types of instructional graphics (representational, analogical, and arbitrary) and an analysis of their possible use in Gagneís domains of learning. Rieber states that the design of instructional graphics is strongly influenced by the inter-relationships and interdependency of the five domains. To help the reader choose the correct graphic for the job intended, a section describing the five applications of instructional graphics (cosmetic, motivation, attention-gaining, presentation, and practice) is included. It is recognized that these applications originated from Gagne's nine events of instruction.
series	other
last changed	2003/04/23 15:14

_id	4f13
authors	Ronchi, Alfredo M.
year	1994
title	A Brief History of CAAD in Italy
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 227
doi	https://doi.org/10.52842/conf.ecaade.1994.x.f3n
summary	Twenty years of revolution, from the middle '70 to the middle '90. Many things have changed since the origins of computer graphics and computer aided design in architecture. We started teaching drafting on terminals which connected to mini computers, complex procedures or sets of graphics libraries working with keywords, vectors and storage screens. The next step was devoted to the discovery of workstations in the early '80's, where the user sat face on to the whole power of a multitasking system. At that time to use up to 16 time sharing processes running on the same work station seemed to have no practical use at all. Fortunately someone (ie Xerox PARC laboratories) at the same time started to develop the so-called GUI. Graphical user interface started a revolution in human/machine interface (ie Smalltalk). The desktop metaphor, the use of multiple windows and dialogues joined with icons and pop up menus let the user manage more applications and, even more important, created a standard in application/user interface (CUA). In the meantime focus had moved from hardware to software, systems being chosen from the software running. The true revolution we have seen starting from that base and involving an ever increasing number of users was the birth of PC based applications for CAAD. Generally speaking nowadays there are three main technologies concerning teaching: communication, multimedia and virtual reality. The first is the real base for future revolution. In the recent past we have started to learn how to manage information by computers. Now we can start to communicate and share information all over the world in real time. The new age opened by fax, followed by personal communication systems and networks is the entry point for a real revolution. We can work in the virtual office, meet in virtual space and cooperate in workgroups. ATM and ISDN based teleconferencing will provide a real working tool for many. The ever increasing number of e-mail addresses and network connections is carrying us towards the so called 'global village'. The future merger between personal digital assistant and personal communication will be fascinating. Multi & HyperMedia technology is, like a part of VR, a powerful way to share and transfer information in a structured form. We do not need to put things in a serial form removing links because we can transfer knowledge as is. Another interesting and fundamental aspect typical of VR applications is the capability to change cognitive processes from secondary (symbolic - reconstructive) to primary (perceptive - motory). In this way we can learn by direct experience, by experiment as opposed to reading books. All these things will affect not only ways of working but also ways of studying and teaching. Digital communications, multimedia and VR will help students, multimedia titles will provide different kinds of information directly at home using text, images, video clips and sounds. Obviously all those things will not substitute human relationship as a multimedia title does not compete against a book but it helps.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9482
id	ddss9482
authors	Schmitt, Gerhard N.
year	1994
title	Interaction with Architectural Cases in a Virtual Design Environment
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The prime business of architecture is change through design. While most architects will welcome any tool which supports this activity with minimal effort, they will not embrace a tool which either seems to automate design or requires major efforts to understand and use. Conventional databases - be it in the form of books or computer applications - are normally in a serving function to support the activity of design and to provide reference. Visual databases have a long history in architecture in the form of drawings, photographs and, more recently, computer-captu-red or computer-generated images. Whereas the first computer-based image libraries closely followed the existing paradigm of existing paper-based libraries, new developments both in software and in computing media offer different opportunities. Knowledge-based and case-based descriptions of architectural features increasingly replace the traditional, passive representations. While in the past these images were subject to more or less random interpretations, the new computer-based images are only one representation of a model which includes many other aspects. The visual aspects of a building are thus no longer restricted to the finished drawing, but new representations of the abstractions of a building become possible. True and direct interaction with visually presented objects thus becomes a reality. The paper presents a prototype of a visual database in a virtual design environment in its critical aspects: (i) the architectural content and representation of such a database and the criteria for the cases in it, (ii) the enabling computing and software environment, and (iii) three practical applications. The prototype is presently being implemented in the Architectural Space Laboratory (ASL) in the Department of Architecture at ETh Zurich.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ascaad2006_paper11
id	ascaad2006_paper11
authors	Stanton, Michael
year	2006
title	Redemptive Technologies II: the sequel (A Decade Later)
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	Nearly ten years ago I published an article in the Dutch journal ARCHIS called "Redemptive Technologies." It derived from comments I made during a conference held in New Orleans in 1994. At that point the machine aesthetic associated with the "new technologies" generated by the computer had not established a precise formal vocabulary but were generating great excitement among the architectural avant-garde. It addressed the limits of the imagery and data produced by this machine and the simple but very political problem of cost and obsolescence. Now the millennium is well past and the somewhat apostolic fervor that accompanied the interaction of a very expensive consumer device with architecture has cooled. Discussion has generally moved from the titillating possibilities opened up by the device, many of which have so far not come to pass, to the sorts of hard and software available. An architectural language closely associated with the imagistic potential of new programs, biomorphism, has now come and gone on the runways of architectural taste. And yet, in recent articles rejecting the direct political effect of architectural work, the potential of new programs and virtual environments are proposed as alternative directions that our perpetually troubled profession may pursue. This paper will assess the last decade regarding the critical climate that surrounds cyber/technology. In the economic context of architectural education in which computers are still a central issue, the political issues that evolve will form a backdrop to any discussion. Furthermore, the problem of the "new" language of biomorphism will be reiterated as an architectural grammar with a 100-year history - from Catalan Modernismo and Art Nouveau, through Hermann Finsterlin and Eric Mendelsohn's projects of the 1920s, to Giovanni Michelucci and Italian work of the post-war, to Frederick Kiesler's Endless House of the late '50s, continuing through moments of Deconstructivism and Architectural Association salients, etc. These forms continue to be semantically simplistic and hard to make. Really the difference is the neo-avant-garde imagery and rhetoric involved in their continuing resurrection. Computer images, but also the ubiquitous machine itself, are omnipresent and often their value is assumed without question or proposed as a remedy for issues they cannot possibly address. This paper will underline the problem of the computer, of screens and the insistent imagistic formulas encourage by their use, and the ennui that is beginning to pervade the discipline after initial uncritical enthusiasm for this very powerful and expensive medium. But it will also propose other very valuable directions, those relating to reassessing the processes rather than the images that architecture engages, that this now aging "new" technology can much more resolutely and successfully address.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	cd68
authors	Szalapaj, Peter J. and Tang, Songlan
year	1994
title	Giving Colour to Contextual Hypermedia
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 191-200
doi	https://doi.org/10.52842/conf.ecaade.1994.191
summary	Design development evolves within design contexts that require expression as much as the design itself, and these contexts often constrain any presentation in ways that are not usually explicitly thought of. The context of a design object will therefore influence the conceptual ways of thinking about and presenting this object. Support in hypermedia applications for the expression of the colour context, therefore, should be based upon sound theoretical principles to ensure the effective communication of design ideas. Johannes Itten has postulated seven ways to communicate visual information by means of colour contrast effects, each of which is unique in character, artistic value, and symbolic effect. Of these seven contrasting effects, three are in terms of the nature of colour itself: hue, brightness, and saturation. Although conventional computer graphics applications support the application of these colour properties to discrete shapes, they give no analysis of contrasting colour relationships between shapes. The proposed system attempts to overcome this deficiency. The remaining four contrast effects concern human psychology and psychophysics, and are not supported at all in computer graphics applications. These include the cold-warm contrast, simultaneous contrast, complementary contrast, and the contrast of extension. Although contrast effects are divided into the above seven aspects, they are also related to one another. Thus, when the hue contrast works, the light-dark contrast and cold-warm contrast must work at the same time. Computational support for these colour effects form the focus of this paper.
series	eCAADe
last changed	2022/06/07 07:56

_id	cbed
authors	Yakubu, G.S.
year	1994
title	Maximising the Benefits of CAD Systems in Architectural Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 228
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u8n
summary	The positive impact of Computer Aided Design (CAD) in professional architectural practice has been in focus in recent times but relatively little has been written on its significance in the education of the contemporary architect. It is common knowledge that the profession of architecture is currently undergoing enormous strains as it battles to keep abreast of trends and developments in a period of series of rapid advancement in science, technology and management (RIBA, 1992). Whilst attempts are being made to redress the shortcomings of the profession in the above context, the requirements for architectural education are yet to forge a coherent strategy for the implementation of CAD/IT in the curriculum of schools of architecture. In almost every other field, including engineering, medicine and the humanities, computing application to problem-solving and decision-making is seen as a way forward as we move into 21st century. Architectural education must integrate CAD/IT into the teaching of core modules that give the architect distinctive competence: studio design. That is one of the best ways of doing justice to the education of the architect of today and the future. Some approaches to the teaching of CAD in schools of architecture have been touched upon in the recent past. Building upon this background as well as an understanding of the nature of design teaching/learning, this paper examines ways of maximising the benefits of CAD systems in architectural education and of bringing computer aided designing into the studio not only to enhance design thinking and creativity but also to support interactive processes. In order to maximise or optimise any function, one approach is to use the hard systems methodology which utilises analytic, analogic and iconic models to show the effect of those factors which are significant for the purposes being considered. The other approach is to use the soft systems methodology in which the analysis encompasses the concept of a human activity system as a means of improving a situation. The use of soft systems methodology is considered more appropriate for dealing with the problem of design which is characterised by a flux of interacting events and ideas that unroll through time. The paper concludes that the main impediment to maximising the benefits of CAD systems in architectural education is not only the inappropriate definition of the objectives for the implementation of CAD education but also that the control subsystems are usually ill-structured and relatively poorly defined. Schools must attempt to define a coherent and consistent policy on the use of CAD systems as an integral part of studio design and evolve an in-house strategic and operational controls that enable the set objectives to be met. Furthermore, it is necessary to support the high level of productivity from CAD systems with a more efficient management system, especially in dealing with communication, data sharing via relational database, co-ordination and integration. Finally, the use of soft systems methodology is recommended as the way forward to optimising CAD systems in design education as it would provide continuous improvements while maintaining their productive value.
series	eCAADe
last changed	2022/06/07 07:50

_id	0574
authors	Alison Murison and James Gray
year	1994
title	Spatial Analysis for Museum Design
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 201-206
doi	https://doi.org/10.52842/conf.ecaade.1994.201
summary	The paper describes how a specially written customisation of AutoCAD enables students of Architecture to use the method of spatial analysis called Space Syntax developed by Professor Bill Hillier of the Bartlett School of Architecture, London, to examine a number of existing museums, to compare the findings against other criteria, and to draw conclusions about the strategy adopted in museum design. Simple interactive graphics enable plans to be entered and compared, so that they may be evaluated during the design process, with decisions supported by objective tests. This improves both design decisions and the learning process.
series	eCAADe
last changed	2022/06/07 07:54

_id	1262
authors	Alshawi, M.
year	1994
title	A run time exchange of component information between CAD and object models: A standard interface
source	The Int. Journal of Construction IT 2(2), pp. 37-52
summary	Integrated computer aided design could only occur in engineering once CAD systems could represent physical features and components rather than graphical primitives. In most dedicated CAD systems, the knowledge of a complete component exists only for the duration of each drawing command and the data stored in the database is simply a set of graphic primitives. This paper proposes an approach for real time information transfer from and to CAD systems based on a high level object representation of the design drawing. Drawing components are automatically identified and represented in an object hierarchy that reflects the 'part-of' relation between the various components including building spaces. Such hierarchies transfer an industry standard CAD system i.e. AutoCAD, into a high level object oriented system that can communicate with external applications with relative ease.
series	journal paper
last changed	2003/05/15 21:45

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

For more results click below: