Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 334

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9411
id	ddss9411
authors	Bouillé, Francois
year	1994
title	Mastering Urban Network Intersection And Superimposition, in an Object-oriented Knowledge System Integrating Rules, Neurons and Processes
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Many networks cover the urban texture, either superimposed at a variable distance, or really intersecting, or even in interconnection. We briefly recall the HBDS model, working on persistent abstract data types associated to graphical representations and carrying algorithms expressing conditions to be verified and/or actions to be performed. HBDS is an integrated system too, including database, expert system dealing with fuzzy rules and facts, discrete simulation engine, and neural engine; it has a general purpose programming language. Any urban network is associated to a given prototype, according to the same scheme named prototype with more specific components. These prototypes allow to build the different thematic structures instantiations of the prototypes. All possible cases of arc intersection or "pseudo-intersection" (simple superimposition)or interconnection are obtained by, owing to new prototypes. Moreover, such (pseudo)-intersections are automatically recognized and processed without a human intervention, owing to classes ofconstraints and classes of rules. They deal with particular constraints concerning the location of some urban furniture, and rules concerning the way a cable or a pipe must follow according to thepre-existing other networks in a given area, the minimal distances, minimal or maximal depths, and some required equipments. Urban classes of (pseudo-)intersections inserted in the hyperciass"neuron", inheriting of neural features, may be used for automated learning of urban knowledge; owing to their "behavior", these neurons can communicate and perform actions on other components. Urban classes inserted in the hyperciass "process" may be used for building very large models simulating complex urban phenomenons, thus allowing a better understanding of the real phenomenons. As a conclusion, we emphasize the methodological aspects of object-oriented integration for an efficient processing of the urban context, based on prototyping and mixing rules, neurons and processes.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9416
id	ddss9416
authors	Campbell, Noel and O'Reilly, Thomas
year	1994
title	GIS: Science or Tool - The Built Environment Perspective
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper attempts to locate GIS in the context of the built environment professions, rather than in the context of computer science, recognizing the integrated but limiting approach of viewingGIS from a strictly computer / spatial science perspective. The paper reviews the conflicts and tensions appearing in the GIS debate seeing them as reflecting the differences between the perceptions and interests of software developers and those of the professions. The "spatial science versus professional tool" dilemma is therefore critically assessed. Science is identified as the dominant paradigm within which GIS development has taken place. This encompasses the emphasis on GIS as spatial science; the interest in particular forms of spatial analysis; a narrow approach to the idea of information; the debate about the appropriate emphasis on the location for GIS in undergraduate education. The interests and activities of the professions cannot be encompassed within the pre-existing science paradigm. The paper identifies the interest the professions have had in broad geographical issues (as distinct from narrow spatial issues). It recognizes the different conventions and procedures used in recording and using geographical information, not all of them objective or scientific. It views the computer, not as a "scientific engine", but as a modern medium for representing and analyzing information. This includes storage and analysis, both internally (algorithmic manipulation) and outside (qualitative manipulation, beyond formal -"computer"- logic). This approach suggests a framework for research of a nature more sympathetic to the needs of the built environment professions in particular and an agenda which would include an examination of: (i) the conventions and procedures used in the professions to collect, store and process information and how these translate to computer technology; (ii) the types of software used and the way procedures may be accommodated by combining and integrating packages; (iii) the dynamism of GIS development (terms such as "dedicated", "mainframe", "PC-based", "distributed", "pseudo-", etc. are identified as indicativeof the need for professions-based approaches to GIS development); (iv) a critique of "information" (modelling of information flows within the professions, may yield valuable insights into the (modelling of information flows within the professions , may yield valuable insights into the similarity of requirements for a variety of "workplace scenarios").
series	DDSS
email
last changed	2003/08/07 16:36

_id	64c5
authors	De Mesa, A., Monedero, J., Redondo, E. and Regot, J.
year	1994
title	From Image Space to Model Space and Back Again
doi	https://doi.org/10.52842/conf.ecaade.1994.060
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 60-68
summary	The paper describes in detail a process of work consisting of merging a virtual model into a real image. This process implies three different kinds of operations: geometric restoration of the real scene, in 3D, from a photograph, rendering a virtual model under similar conditions as the photograph, and merging of the rendered image with the original image. The paper empasises quality and visual precision of results together with a semiautomatization of the entire process. It also refers critically these three different groups of operations to their theoretical background. It concludes with an evaluation of the work from the point of view of architectural visual analysis and from the point of view of architectural visual analysis and from the point of view of a general design methodology.
series	eCAADe
last changed	2022/06/07 07:56

_id	ga0024
id	ga0024
authors	Ferrara, Paolo and Foglia, Gabriele
year	2000
title	TEAnO or the computer assisted generation of manufactured aesthetic goods seen as a constrained flux of technological unconsciousness
source	International Conference on Generative Art
summary	TEAnO (Telematica, Elettronica, Analisi nell'Opificio) was born in Florence, in 1991, at the age of 8, being the direct consequence of years of attempts by a group of computer science professionals to use the digital computers technology to find a sustainable match among creation, generation (or re-creation) and recreation, the three basic keywords underlying the concept of “Littérature potentielle” deployed by Oulipo in France and Oplepo in Italy (see “La Littérature potentielle (Créations Re-créations Récréations) published in France by Gallimard in 1973). During the last decade, TEAnO has been involving in the generation of “artistic goods” in aesthetic domains such as literature, music, theatre and painting. In all those artefacts in the computer plays a twofold role: it is often a tool to generate the good (e.g. an editor to compose palindrome sonnets of to generate antonymic music) and, sometimes it is the medium that makes the fruition of the good possible (e.g. the generator of passages of definition literature). In that sense such artefacts can actually be considered as “manufactured” goods. A great part of such creation and re-creation work has been based upon a rather small number of generation constraints borrowed from Oulipo, deeply stressed by the use of the digital computer massive combinatory power: S+n, edge extraction, phonetic manipulation, re-writing of well known masterpieces, random generation of plots, etc. Regardless this apparently simple underlying generation mechanisms, the systematic use of computer based tools, as weel the analysis of the produced results, has been the way to highlight two findings which can significantly affect the practice of computer based generation of aesthetic goods: ? the deep structure of an aesthetic work persists even through the more “desctructive” manipulations, (such as the antonymic transformation of the melody and lyrics of a music work) and become evident as a sort of profound, earliest and distinctive constraint; ? the intensive flux of computer generated “raw” material seems to confirm and to bring to our attention the existence of what Walter Benjamin indicated as the different way in which the nature talk to a camera and to our eye, and Franco Vaccari called “technological unconsciousness”. Essential references R. Campagnoli, Y. Hersant, “Oulipo La letteratura potenziale (Creazioni Ri-creazioni Ricreazioni)”, 1985 R. Campagnoli “Oupiliana”, 1995 TEAnO, “Quaderno n. 2 Antologia di letteratura potenziale”, 1996 W. Benjiamin, “Das Kunstwerk im Zeitalter seiner technischen Reprodizierbarkeit”, 1936 F. Vaccari, “Fotografia e inconscio tecnologico”, 1994
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	a163
authors	Gross, Mark D.
year	1994
title	The Fat Pencil, the Cocktail Napkin, and the Slide Library
doi	https://doi.org/10.52842/conf.acadia.1994.103
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 103-113
summary	The paper describes recent explorations in sketch recognition and management to support architectural design. The exploration and decisionmaking of early, conceptual design is better suited to freehand drawing, sketching, and diagramming than to the hard-line drawing and construction kit approaches of traditional CAD. However, current sketch programs that simulate paper and pencil fail to take advantage of symbolic manipulation and interactive editing offered by computational environments. The paper presents a computer as cocktail napkin' program, which recognizes and interprets hand-drawn diagrams and provides a graphical search facility, simulated tracing paper, and a multi-user shared drawing surface. The cocktail napkin is the basis of Stretch-A-Sketch, a constraint-based draw program that maintains spatial relations initially specified by a diagram. The cocktail napkin program is also the basis for a query-by-diagram scheme to access a case-based design aid as well as a small collection of images of famous buildings. The paper briefly reviews these extensions of the cocktail napkin program.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	ddss9437
id	ddss9437
authors	Gu, Jing-wen and Chen, Bing-zhao
year	1994
title	Data Structure and Its Processing in Planar Road Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The planning of roads is one of the most important activities in urban planning and design. Even at the early stage of planning, a planner must take the roads and their planar layout into account and should design them as soon as possible. Then he can use the roads as building blocks for further planning, such as land use, underground layout, detailed district planning and road design. In conventional manual design procedures and according to the "Norm of Transport Planning onUrban Road", it is a tedious task to draw property and side lines of the road network in a city or district and to link them properly at road crosses. With the help of computers, it will be possible to do it automatically. In this paper, the data structure we constructed for our PC software for road processing is first introduced. This data structure defines the road level, the widths of side and property lines, the orientation and topological link of one road with other roads. The procedural considerations for road processing are then given. They include the generation of the side lines and property lines, smooth linking between adjacent roads, rounding of arc roadsegments and all of the physical coordinates for the control points on both centre-lines and property lines. When using this system, a planner only needs to input the centre lines of roads and their width. The roads can be either inputted by using a digitizer or directly sketched on the display. The subsequent processing mentioned above is completed automatically, and the resulting geometric data associated with the road network is stored in a database with the same data structure. The specification on the road cross, which is required during the processing, can be changed interactively and globally, and once changed the regeneration of the above process will be finished very fast.
series	DDSS
last changed	2003/08/07 16:36

_id	0726
authors	Kadysz, Andrzej
year	1994
title	CAD the Tool
doi	https://doi.org/10.52842/conf.ecaade.1994.x.k7r
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 212
summary	What is the role of CAAD as a tool of architectural form creation ? We used to over-estimate the role of computer as significant factor of design process. In fact it serves only to produce technical documentation and to visualise designed buildings. We usually use CAAD to record ideas, not to create designs. We use it like more complex pencil. But it is unsuitable for conceptual design , with imperceptible influence on idea definition. Its practical usefulnes is limited. I would like to consider and find out reasons of that state, present some conclusions and ideas on computer aided architectural form creation. Many tools were invented to extend posibilities of human body or intellect. Microscop and telescop are extensions of human eye. Which organ is extended by computer (especially by CAAD)? CAAD with high developed function of visualising of the object beeing designed seems to be an extension of architect's imagination. It is beeing used to foresee visual efects, to check designed forms, to see something what we are not able to imagine. It performes the role of electronic modeler. Real model and virtual model - the medium of presentation is diferent but ways of using them are similar . Dislocation of place where we build model is not a big achievement, but potential possbilities of CAAD in modeling are almost unlimited (?). What are special features of CAAD as a modeling tool? First we have to consider what is indispensible when building a model: to embody idea. To do this we need space, substance and tools. In architectural design practice space is a real site with definite climate, neigbourhood, orientation. Substance that we shape is an archiectural form composed of many difrent elements: walls, windows, roof, entry, ... , proportions, rhythm, emotions, impresions... The tool is: our knowledge, imagination, talent, experience, norms, law and drawing equipment. Working with the computer, making virtual model, we have many of mentioned elements given in structure of CAAD program and interpreted by it. But many of them have different character. Making traditional dummy of building we operate on reality which is manually accessible. In case of computer model we operate on information. Space, substance and tool (- program) are informations, data. Human being is not an abstract data processor, but creature that lives non stop in close, direct, sensual contact with nature. By this contact with enviroment collects experiences. Computer can operate on digital data that is optionally selected and given by user, independent upon enviromental conditions. Usually architecture was created on basis of enviroment, climate, gravity. But these do not exist in CAAD programs or exist in the symbolic form. Character of these conditions is not obvious. We can watch demeanour of objects in gravity but it can be also antigravity. In theory of systems everything is considered as a part of biger system. In "virtual" reality (in computer space) we deal with accurences which are reduced to abstract level, free upon terms or connections. We work with our CAAD software using geometric space whithout any other principle.
series	eCAADe
last changed	2022/06/07 07:50

_id	c4ae
id	c4ae
authors	Knapp, Robert W. and McCall, Raymond
year	1996
title	PHIDIAS II - In Support of Collaborative Design
doi	https://doi.org/10.52842/conf.acadia.1996.147
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 147-154
summary	The World Wide Web in combination with Java and Virtual Reality Modeling Language (VRML) create great opportunities for collaboration by distributed design teams. To take advantage of these opportunities, we have begun to create a version of the PHIDIAS hyperCAD system (McCall, Bennett and Johnson 1994) that will support communication and collaboration among designers over the Word Wide Web. PHIDIAS is an intelligent, hypermedia-based system for computer-aided design. Our strategy is to divide PHIDIAS into two parts: 1) a client-side user interface and 2) a server-side hyperCAD database engine. The client-side interface is being implemented using Java and VRML. Implementing the PHIDIAS front-end with Java enables program code distribution via the World Wide Web. VRML provides PHIDIAS with client-side computation and display of 3D graphics.
series	ACADIA
last changed	2022/06/07 07:51

_id	cec8
authors	Kolarevic, Branko
year	1994
title	Lines, Relations, Drawing and Design
doi	https://doi.org/10.52842/conf.acadia.1994.051
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 51-61
summary	This paper introduces a computer-based graphic environment for design conceptualization, or more specifically, for shape delineation and dynamic drawing manipulation, based on construction (regulating) lines and their geometric based on construction (regulating) lines and their geometric relations. It also presents ReDRAW-a limited prototype of a relationsbased graphic system.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	2647
authors	Koutamanis, Alexander
year	1994
title	Sun and Time in the Built Environment
doi	https://doi.org/10.52842/conf.ecaade.1994.x.f4j
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 248
summary	At a time when requirements on the quality of the built environment are increasingly becoming explicit and specific, computer technology promises the ability to analyse and evaluate buildings during the design process. The computer can extract the necessary information from conventional geometric representations, generate comprehensive descriptions of the aspects to be analysed and use these to arrive at precise and accurate results that can be represented visually. Visual representations facilitate comprehension of the analyses and of their results because of their agreement with our predominantly visual perception of the built environment. The consequent close correspondences between geometric design representations and the visual representation of analyses and evaluations allow direct correlation of the results with the design as a whole. Such correlation is instrumental for imposing explicit and justifiable constraints on the further development of a design. One good example of visual analyses is daylighting. In many drafting and modelling programs a viewing point can be set on the basis the sun’s height and azimuth. The projection returned reveals the surfaces that are directly lit by the sun. In other programs the sun’s height and azimuth can be used to position a light source with parallel rays. This source gives rise to shading and shadows that correspond to the ones produced by the sun. In addition, several programs can calculate the position of the sun and hence the viewing point or the light source on the basis of the date, the time and the geographic coordinates of the place. The availability of computer-aided daylighting analysis has obvious advantages for practice. Efficiency and reliability of the analysis increase, while flexibility is superior to analog simulations. Unfortunately automation of daylighting analysis may also impede understanding of underlying principles, that is, of the issues at the focus of architectural education. Explaining how the analysis is performed and why becomes thus a necessity for computer-aided design education. Exercises that aim at more than just learning and using a computer program can enrich the student’s understanding of the analysis and its results. The efficiency and flexibility of the computer facilitate the study of aspects such as the comparison of local apparent time, local mean time, standard time and daylight saving time and their significance for daylighting, solar heating and cooling patterns and possibilities. Sundials with their explicit correspondence to solar movement can be instrumental in this respect. The efficiency and flexibility of the computer also support the investigation of the techniques by which the daylighting analysis is performed and explain the relationships between projective theory, sciagraphy and computer graphics. A better understanding of the principles and techniques for daylighting analysis has a generally positive influence on the students’ learning of the daylighting analysis software and more significantly on their correlation of daylighting constraints with their designs. This leads in turn to increased flexibility and adaptability of the designs with respect to daylighting and to a conscious and meaningful exploration of variations and alternative solutions.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	2e74
authors	Liebich, Thomas
year	1994
title	Behind the Lines - Managing Semantically Rich Data in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u5d
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 253
summary	Current CAD systems have inherent bottlenecks, which diminish possible achievements for architectural practices. Among these shortcomings there are two the paper will deal with. Firstly, traditional CAD relies on a pure geometric model. All non-geometric information about objects of architectural interest has to be attached to these geometric entities. This restricts the ability to describe semantically dependent relationships. Secondly, the integration of different design tools for building and construction is still at its very beginning. The data exchange remains restricted, since it is based on a fairly low semantic level of a document-based exchange of information, such as geometric representation in DXF or IGES, rather than on a high semantic level of a model-based exchange.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9462
id	ddss9462
authors	Liggett, Robert S. and Jepson, William H.
year	1994
title	Implementing an Integrated Environment for Urban Simulation CAD, Visualization and GIS
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Using technology which has been adapted from military flight simulation hardware and software, researchers at UCLA's Graduate School of Architecture and Urban Planning are currently developing an integrated computing environment for Urban Simulation which includes a high-level visual simulation package, an industry standard CAD system, and a traditional two dimensional geographic information system and data bases. The focal point of the integrated system is a visual simulation engine which has been developed using Silicon Graphics' IRIS Performer application development environment. With this system, aerial photographs can be combined with street level video to efficiently create a realistic (down to plants, street signs and the graffiti on the walls) model of an urban neighbourhood which can then be used for interactive fly and walk-through demonstrations. Links have been established between this visual simulation system and AutoCAD to allow models (at varying levels of detail) to be generated using the CAD system and translated into the form required for the visualization system. Links between the GIS system (in this case ARC/INFO and ARCVIEW) and the visual simulation system provide the capability for dynamic query and display of information from the GIS data base in a real-time 3-dimensional format. Links between the CAD and GIS systems allow common base maps to be used for the GIS and modelling systems as well as automatic generation of 3-d form. While an earlier paper by the authors discussed proposed strategies for such an Urban Simulation System, this paper focuses on the results of actual implementation of these strategies, as well as the use of the system for modelling, exploration and display of alternative physical environments.
series	DDSS
email
last changed	2003/08/07 16:36

_id	b4e1
authors	Merz, R.
year	1994
title	Shape deposition manufacturing
source	Vienna University of Technology
summary	This thesis addresses the issue of rapidly and automatically fabricating functional metal parts directly from CAD models. A newly developed process called Shape Deposition Manufacturing (SDM) is introduced. The process is based on the concept of layered manufacturing in SFF, but uses separate deposition and shaping steps to create a layer. Three dimensionally shaped layers are created using 5-axis CNC machining, to achieve the required geometric accuracy for fully functional shapes. Thermal deposition technologies (thermal spraying, welding) are used to achieve the required material properties. A novel, droplet based deposition process, microcasting, has been developed, to create well- bonded, high-strength material, while minimising the heat input into previously shaped layers. To create layers with a true three dimensional geometry, more detailed building strategies, than used by conventional SFF processes, are required by the SDM process. A CAD based planning system, which addresses these issues by decomposing a solid model of a part into layers and manufacturable, fully three dimensional segments is described. An automated testbed facility installed at Carnegie Mellon's Shape Deposition Laboratory is discussed, and shows the feasibility of automating the process. The microcasting process is explained in detail and its performance in the SDM environment is evaluated. Different strategies and material combinations for the support structure have been developed and are presented with detailed descriptions of several building strategies for parts with various complexity and material quality. Material properties of structures created by the SDM process are evaluated. Problems affecting the accuracy and material integrity of SDM created structures, which mainly involve the buildup of thermal stresses during material deposition, are identified and opened for future research. Finally, various parts, with different complexity, have been built with the SDM process, to show the feasibility and performance of the process. Building time and material usage are evaluated and compared to conventional SFF processes
series	thesis:PhD
email
more	http://www.arcs.ac.at/dissdb/rn024248
last changed	2003/02/12 22:37

_id	61a4
authors	Parsons, Peter W.
year	1994
title	Craft and Geometry in Architecture: An Experimental Design Studio Using the Computer
doi	https://doi.org/10.52842/conf.acadia.1994.171
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 171-176
summary	Craft is one of the main aspects of architecture that accounts for its strong corporeal presence. The Computer used as a geometry machine lacks such tectonics. The predominant means for bringing a sense of materiality to its geometric constructions is through rendering, and in this respect the computer is not significantly different from geometric drawing. One need only recall the beautifully rendered drawings of the Beaux-Arts for a comparison. With the rise of modern architecture such 'paper' architecture was voraciously denounced in the cause of relating architectural production more closely with crafted production. Even now the interest in craft has persisted despite postmodern criticism. Therefore, a means for bringing a greater sense of craft to computer-aided design seems desirable. The architectural studio discussed in this paper was initiated partly for this purpose by intentionally confronting the computer's proclivity to move its users away from craft toward geometry, while at the same time taking advantage of its capabilities as a geometry machine. Craft can best be understood by practicing it. Consider, for example, the use of a chisel in woodwork. As one applies force with it, one can feel the resistance of the material. Carving with the grain feels differently than carving against or across it. Carving a piece of maple feels differently than carving a piece of pine. If one presses too hard on the chisel or does not hold it at the precise angle, there is a great risk of creating an unwanted gouge. Gradually with practice the tool feels as if it is an extension of the hand that holds it. it becomes an extension of the body. One can feel the physical qualities of the wood through it. Like a limb of the body its presence can become transparent and one can learn about what one feels through it. It can imprint a memory in the mind that comes to the brain, not through the eyes alone, but through the tactile senses. On the other hand it is tiring to use a chisel for an extended period of time. One's body begins to ache and, as the body tires, the risks of making an unwanted mistake increase. Furthermore, because a tool becomes wedded to the body, it is almost impossible to use more than one tool at a time unless they are being used in conjunction with one another as one might use two limbs of the body together. On a computer one can never 'feel' an object, the image of which is on the screen, in the same manner that one can feel with a chisel the material upon which one is working. One becomes particularly aware of this when creating a 3D computer model of a hand tool. One wants to hold it, not just look at it. Thus the artifice of the object created by means of the computer becomes very apparent, because the 'tool' has not yet taken on the qualities of a tool, although it has taken on the appearance of one.
series	ACADIA
last changed	2022/06/07 07:59

_id	bbba
authors	Stouffs, R.
year	1994
title	The Algebra of Shapes
source	Carnegie Mellon University, Departement of Architecture
summary	This thesis investigates a new representation scheme for geometric modeling, based on an algebraic model for shapes and formalized using a boundary representation. The algebraic model is mathematically uniform for shapes of all kinds and provides a natural and intuitive framework for mixed-dimensional shapes. The corresponding maximal element representation is essential to the concept of shape emergence. The representation scheme particularly supports computational design as a generative process of search or exploration. This thesis begins with a treatment of the algebraic and geometric properties of shapes and gives a formal and complete definition of the maximal element representation for n-dimensional shapes in a k-dimensional space (n ? k). Efficient algorithms are presented for the algebraic operations of sum, product, difference and symmetric difference on shapes of plane and volume segments. An exploration of related research in shape grammars, computational design and construction simulation, illustrates the potential of this representation scheme, while an agenda for future research depicts its present shortcomings.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	6b67
authors	Terzidis, Constantinos A. and Vakalö, Emmanuel-George
year	1994
title	Computer-aided Extraction of Morphological Information from Architectural Drawings
doi	https://doi.org/10.52842/conf.acadia.1994.077
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 77-86
summary	The objective of the research reported in this paper is to design, implement, and test a computerbased system which allows its user to: (1) extract automatically the geometric, topological, and spatial structures of an architectural plan, (2) extract morphological information, such as axes of symmetry, hierarchical structure, proportions, and modularity from architectural plans, and (3) compare morphological information of classes of architectural plans. Computer vision and pattern recognition techniques are used.
series	ACADIA
last changed	2022/06/07 07:58

_id	df9b
authors	Terzidis, Constantinos A.
year	1994
title	Computer-aided extraction of morphological information from architectural drawings
source	University of Michigan
summary	Along with the popularization of Computer-Aided Design (CAD), it has been becoming increasingly necessary and desirable for a computer to recognize engineering drawings and diagrams. Methods exist for inputting and recognizing such engineering drawings and diagrams. This is primarily because they are drawn to conform to specific standards. In contrast, architectural drawings are not prepared in accordance to existing standards. Hence, the problem of reading, recognizing, and extracting morphological information from them automatically remains unsolved. It is this problem that this study focuses on. The research undertaken by this author has three distinct but interrelated objectives. The first objective is to design, implement, and test a computer-based framework which allows its user to extract automatically the geometric and/or architectural structures of a two-dimensional plan. The second objective entails designing, implementing, and testing a computer-based framework which may be employed to compare the geometric and/or architectural structures of individual plans or classes of such plans. The third objective is to integrate the two aforementioned frameworks. Computer vision techniques are used to investigate, analyze, and compare plans of buildings from a morphological standpoint. Such techniques can contribute toward detecting differences or similarities between individual plans. Their ability to search for, combine, and compare morphological information is both parsimonious and effective. Predicated on the assumption that designers derive knowledge from past solutions to form-making problems, this study focuses on the methods by which the morphological information which is contained in building plans can be extracted automatically and entered in a knowledge base. Conceptually, this is part of a larger project which entails investigating how knowledge can be incorporated in a CAD system in a manner which aids and supports the form-making process. Conceivably, the approach of this work is, wholly or partially, applicable to the problem of extracting useful information from graphic representations used in a variety of disciplines (e.g., engineering).
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	dda4
authors	Yezioro, Abraham
year	1994
title	Form and Performance in Intelligent CAAD Systems for Early Stages in Solar Design Building
source	Technion, Faculty of Architecture and Town Planing, Haifa
summary	Great care should be taken at the initial design stages to determine the principles and solution schemes for climate and energy-conscious buildings. The present study deals with supporting the designer's efforts at the early stages to lay down the appropriate principles for a conceptual and geometric design of energy-preserving buildings, which are also thermally comfortable and adapted to local climatic conditions. For years, especially during the last decade, important data concerning climate-conscious construction has been compiled, but the information has not been utilized by designers, due to its inaccessibility. It is significant, though, that solutions based on this knowledge could be found and assessed at the preliminary design steps. A correct climate-conscious design conceived at the initial stages may guarantee that during later phases of the project's development no problems calling for essential and drastic changes in the basic design will crop up. The meaning of such changes at later stages may require sometimes a redesigning of the entire project. It is vital, therefore, to understand at the pre-conceptual phase, what are the correct climatic-solar design strategies which satisfy the requirements of the local conditions, and enable the attainment of thermal comfort conditions, while consuming the least possible energy. The present study proposes a computer-aided passive solar design system (PASYS) which enables the handling of entire designing process, and its general, conceptual aspects, as well as the preliminary designing steps and their particular, practical aspects. The system is based both on a knowledge base which stores the existing information concerning solar-climatic construction in the form of rules of thumb, and on precise procedural models which enable finding solutions suited to the local climatic conditions. The proposed system is an intelligent CAAD system which equips the designer who is aware of the constraints of climate and energy, with a tool to achieve a better design. PASYS was developed as a universal system to deal with the various activities involved in the initial – pre-conceptual and conceptual - design stages. The system supports the following design activities of each stage of this kind: analysis, synthesis, documentation, assessment and decision making. It is capable of analyzing given conditions, thus helping the designer understand which are the significant preliminary design stages that have a bearing on thermal comfort conditions in a given climate. The system is also capable of proposing solutions corresponding with the particular design phase, and assess their adequacy. These solutions take into account the constraints determined both by the designer and by the system itself, owing to the knowledge base it contains. The system can also document the various solutions that have been found and selected, so that may be further developed at later stages. This documentation is carried out by a graphic interface, developed as part of the system, as well as by an interface devised for existing CAD software. This study highlights the interaction between form and performance. The system is able to assess the performance of a proposed design by considering a given geometry (form), or viceversa, it is able to recommend a solution that can deliver desired and required performances. The study comprises three parts: (a.) Development of the conceptual model of a knowledge based design process. (b.) Further development of the initial stages of the afore mentioned process, including the pre-conceptual and conceptual stages. (c.) Demonstration of the mode of work with the PASYS system. // The first part of the study deals with the definition of the design process, the definition of the various design steps and their characteristics, and the definition of the activities involved in each design step. This part of the work also presents the kinds of knowledge bases affecting the design process, and shows how this knowledge is an inseparable part of the design process. The second part deals with the development of the initial design stages - the pre-conceptual and the conceptual - which are based on knowledge. This part also contains compiled knowledge that is relevant to the design stage, and a knowledge storage and retrieval method that was developed so as to make the knowledge available and accessible on demand. This part further presents precise procedural methods, developed to find solutions adapted to the specific given conditions, and to precisely assess the performance of the proposed solution. A case in point is the module of the SHADING system which enables a precise assessment of the mutual shading of buildings, and an examination of the exposure of the southern elevation to the sun, which is necessary in order to determine the effective solar absorption area in a proposed project in given environment conditions. The third part of the study demonstrates the solar-climatic design process put into action and supported by the system that was developed. This system enables the designer, even at the preliminary design stages, to determine which properties relating to local climatic conditions he will introduce into the building. This important, seemingly natural act, is usually performed during more advanced stages, when it might generate significant changes in the design, at a juncture when changes are hard to make. A PASYS-aided design environment ensures that from the beginning of the designing process, the project will be designed correctly and efficiently as far as energy is concerned.
keywords	Knowledge Base; Design Process; Form; Performance; CAAD Systems
series	thesis:PhD
email
last changed	2003/03/03 11:58

_id	b110
id	b110
authors	Abadi Abbo, Isaac and Cavallin Calanche, Humerto
year	1994
title	Ecological Validity of Real Scale Models
source	Beyond Tools for Architecture [Proceedings of the 5th European Full-scale Modeling Association Conference / ISBN 90-6754-375-6] Wageningen (The Netherlands) 6-9 September 1994, pp. 31-40
summary	Space simulation is a technique employed by architects, urban designers, environmental psychologists and other related specialists. It is used for academic and research purposes, as an aid to evaluate the impact that the built environment or that to be built would yield in potential or real users. Real Scale Model is organized as one of the models which represents more reliable spatial characteristics in space simulations. However, it is necessary to know the ecological validity of the simulations carried out, that is the degree in which laboratory results could be taken as reliable and representative of real situations. In order to discover which variables of the model used are relevant so that their perception results ecologically valid in respect to reality, a research has been designed in which simulations of specific spaces are appraised both in real space and in the real scale model. The results of both evaluations were statistically analyzed and it shows no significative differences in psychological impressions between the evaluation of real spaces and real scale model. These ecological validation of the real scale model could be of great use to estimate the validity of the results obtained in spaces simulated in the laboratory.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa
last changed	2006/06/24 09:29

For more results click below: