Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 363

Reformat results as: short short into frame detailed detailed into frame

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	0e58
authors	Campbell, D.A. and Wells, M.
year	1994
title	A Critique of Virtual Reality in the Architectural Design Process, R-94-3
source	Human Interface Technology Laboratory, University of Washington, Seattle, USA, http://www.hitl.washington.edu/publications/r-94-3/: 23 May 2001
summary	An addition to a building was designed using virtual reality (VR). The project was part of a design studio for graduate students of architecture. During the design process a detailed journal of activities was kept. In addition, the design implemented with VR was compared to designs implemented with more traditional methods. Both immersive and non-immersive VR simulations were attempted. Part of the rationale for exploring the use of VR in this manner was to develop insight into how VR techniques can be incorporated into the architectural design process, and to provide guidance for the implementers of future VR systems. This paper describes the role of VR in schematic design, through design development to presentation and evaluation. In addition, there are some comments on the effects of VR on detailed design. VR proved to be advantageous in several phases of the design. However, several shortcomings in both hardware and software became apparent. These are described, and a number of recommendations are provided.
series	other
email
last changed	2003/04/23 15:50

_id	6651
id	6651
authors	Chen, N., Kvan, T., Wojtowicz, J., Van Bakergem, D., Casaus, T., Davidson, J., Fargas, J., Hubbell, K., Mitchell, W., Nagakura, T. and Papazian, P.
year	1994
title	PLACE, TIME AND THE VIRTUAL DESIGN STUDIO
doi	https://doi.org/10.52842/conf.acadia.1994.115
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 115-132
summary	A design problem shared over the Internet raises issues of how digital media and group dynamics affect networked design collaborations. This paper describes how to conduct a long-distance studio and compares asynchronous and synchronous collaborative techniques. Digital methods are discussed in relationship to both the creative process and design communication. In schematic stages, less precise tools used asynchronously allow free exploration and creative misreadings, while in later stages, more direct real-time exchanges bring a project to resolution. For the final review, synchronous video-conferencing with interactive graphics allow comparison of cross-cultural differences. Used effectively, these tools can electronically create a compelling sense of place. Ways to foster a strong virtual community are discussed in an agenda for future virtual design.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ddss9428
id	ddss9428
authors	Erturk, Scvinc and Erturk, Zafer
year	1994
title	Historical Background of the Visual Simulation Models in Architectural Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	It is well known that every sort of visualization model has its own capacity to represent the reality and designers' concepts of space. To the authors' knowledge, there are very few attempts to measure and compare their relative potential power of presentation. Given this lack of academic studies, it would be necessary to give a historical background on the use of visual models. Basically those tools could be divided into two main types : traditional visula techniques such as drawings , scale models and most advance technological tools ranging from basic slidesand films to recentlydeveloped techniquessuch as relatoscope, and computer aided simulation models. This paper covers the historical background of visual models .
series	DDSS
last changed	2003/08/07 16:36

_id	2775
authors	Fuchs, Wladyslaw and Wrona, Stefan K.
year	1994
title	Looking for the Best Place for Computer Models in Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1994.043
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 43-46
summary	In the past, many Schools of Architecture were mastering skill of preparing hand made models and hand drawings as a main technique in design education (e.g. Warsaw School of Architecture). Introduction of CAAD to teaching process brings a new modelling techniques and a new possibilities. The role of computer models in architectural education is very promissing and still not fully recognized. Development of modelling techniques and communication media is much quicker than development of design studio concepts. Many concepts and experiments in this field had place in architectural schools all over the word. A new concept of design studio based on computer modelling techniques as a communication media is the subject of interest of the Warsaw School of Architecture. The virtuality versus reality in teaching concepts is one of the most important issues in our traditional, professionaly oriented school.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddss9429
id	ddss9429
authors	Geerling, Heinrich
year	1994
title	A Proposal for a Framework for Business Re-engineering in Design and Realization of Artificial Environments
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	According to the Top-Down design process', this paper gives a generic and qualitative description of a Concurrent Engineering Environment, that should support the problem solving procedure in town planning and architecture in a modern quality oriented society. A system that is based on the principal of democracy might guarantee the preservation of quality in the projection and realization of artificial environments. This environment can be seen as a part of the today often discussed "digital democracy", which practically is based on a infrastructure of computers, interfaces, software systems, a network, databases and a data presentation, that is able to comprise the expectations of professionals involved in the architecture and town planning process. The paper will discuss what the role of the designer and coordinator of this computer environment looks like,in order to design, plan, build and coordinate activities for the realization of this Concurrent Environment and how several software engineers work concurrently to develop tools that guarantee a modular integration. The backbone of this environment is the definition and use of standards for data exchange. Basically those standards are derived from two domains: artifacts will be described in a product model data, while natural resources are described in spatial data. Town planning has to integrate both models. It will be discussed briefly how far the data modelling language EXPRESS of part 11 of the ISO 10303 (Express Language Reference Manual) might be useful to model GIS related problems. An example will describe how a scenario of activities, from registration of real world data to recognition of requirements of society, the definition of development plans through design(competition), lawfulness checking and construction until demolition should look like.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9456
id	ddss9456
authors	Kubiak, Bernard and Korowicki, Antoni
year	1994
title	Identification And Analysis of the Recreational Behaviour Forms and the Needed Recreational Space Using the Integrated Spatial and Object-Oriented Gis: Concepts and Statements
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper is concerned with how to measure and investigate changes in the recreational behaviour and the required recreational space in Polish seaside recreational areas in last few years. Spatial information is an integral part of the identification and analysis of recreational behaviour and required recreational space. We postulate, therefore, that spatial information should be fully incorporated in integrated object-oriented GIS and Decision Support Technology. We argue in this paper that the existing theoretical approaches with their descriptive and technical basis do not offer directions for its application and evaluation. They do not seek to explain the processes undergone by spatial information, nor define appropriate data models. New approaches to GIS use object-oriented structures and expert systems concepts, and they will become increasingly helpful in understanding GIS. It is not unreasonable to expect that the most important issue is to use a data model or object-oriented models which closely represent the user's concept of the geographic object for representing spatial phenomena. We have discovered that most Polish users in this field are unable to collect the data they require directly. Thus they have to use methods and techniques, which cannot be found in GIS such as SWOT analysis. According to our experiences, the identification and analysis of the recreational behaviour and the required recreational space should be defined as a system approach where: (i) recreational space requires an object, (ii) state of recreational space is defined by the set of values of recreational space features, and (iii) the utility of the recreational space is defined by a set of features. The identification and analysis of the recreational behaviour in the presented approach are based on the features/utilities matrix of the recreational space and the computer map. The development of such a system needs many organizational changes. It is shown that in many applications organizational rather than the technical aspects of GIS determine their future and open the way to new spatial analytical techniques.
series	DDSS
last changed	2003/08/07 16:36

_id	ad0e
authors	Mullet, Kevin E. and Sano, Darrell K.
year	1994
title	Applying Visual Design: Trade Secrets for Elegant Interfaces TUTORIALS
source	Proceedings of ACM CHI'94 Conference on Human Factors in Computing Systems 1994 v.2 pp. 353-354
summary	This tutorial describes a number of fundamental techniques applied routinely in communication-oriented visual design. The orientation, process, training, and culture of the visual design disciplines (graphic design, industrial design, interior design, architecture) are essential components of effective interface design. Unfortunately, few software developers or human factors engineers receive any training in these disciplines. This tutorial describes important design rules and techniques internalized by every visual designer through coursework and studio experience. While mastery will indeed require extended practice, the techniques we describe are not difficult to understand and can be immediately applied to real-world problems. We draw our background, training, and influence from the rational, functional, information oriented perspective of the Modernist design ethic. Because all graphical user interfaces are communication systems, we believe their design should reflect these same values. Our tutorial is organized not along the traditional subdisciplines of color, typography, or ideation, but along the problems of graphical interface design as experienced in commercial software development. We describe basic design principles (the what and why), common errors, and practical techniques (the how) for each of the six major areas outlined below. (1) Elegance and Simplicity (2) Scale, Contrast and Proportion (3) Organization and Visual Structure (4) Module and Programme (5) Image and Representation (6) So What About Style?
series	other
last changed	2002/07/07 16:01

_id	ddss9474
id	ddss9474
authors	Pereira, A.G., Munda, G. and Paruccini, M.
year	1994
title	Generating Alternatives For Siting Using Genetic Algorithms and Multiple Criteria Decision Techniques
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	It is believed that a fundamental step in the structuring of a siting problem is generating alternati-ves. This task should occur at the beginning of a process for facility location, giving a preliminary insight into the feasibility of the project in the area of concern by identifying a manageable number of feasible alternatives for careful review and consideration. The purpose of this paper is to present a methodology aimed at generating alternatives for siting of facilities taking into account a number of criteria. These criteria comprise environmental, economical and the action's inherent technical aspects. The search is carried out by applying genetic algorithms (GA's) which are natural phenomena based algorithms for optimization and random search procedures. According to the GA's terminology, a fitness function measures the worth of each candidate alternative codified into a chromosome. It was thought that the merging of aspects of multiple criteria theory and genetic algorithms is essential for the problem of generating alternatives in location problems. The aim of this integration is the improvement of the theoretical principles upon which the fitness function is based, leading to the construction of a robust set of alternatives. The paper describes the integration of both multiple criteria theory and GA's and discusses the results.
series	DDSS
email
last changed	2003/08/07 16:36

_id	4181
authors	Sasada, Tsuyoshi Tee
year	1994
title	Open Design Environment and Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.1994.003
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 3-6
summary	OpenDesignEnvironment is a concept of a design environment for environmental design. At the same time, OpenDesignEnvironment is a system which was build according to that concept. It uses 3-D models and computer graphics as a communication medium, and aims to make a design process open to the people who are concerned with a design project. OpenDesignEnvironment was used in practical environmental design projects, and worked as presentation tools, design review tools, and design tools. Furthermore, OpenDesignEnvironment is going to be an environment for collaborative design.
series	eCAADe
last changed	2022/06/07 07:57

_id	ddss9484
id	ddss9484
authors	Sklar, Hinda
year	1994
title	Opening Doors at Harvard's Graduate School of Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Design communication has many forms and employs a wide array of references. Design pedagogy uses a rich body of sources and is informed by deep communication between faculty and student. Advancing technology for distribution and manipulation of digital design media and a pervasive computer network at the Harvard Graduate School of Design provide an ideal environment for investigating new methods of access to design resources. A research initiative called the DOORS project (Design-Oriented On-line Resource System) will make a variety of design reference materials available over the GSD's computer network Potentially, DOORS will provide access to: - the Frances Loeb Library's visual and special collections; - slides, drawings, photographs, videos; - private faculty slide collections; - maps and geographic information systems of text, numeric and other visual databases of three- dimensional computer models; - computer-generated animations and digital video segments with sound of multimedia projects. As early pilot versions of DOORS are released, faculty and students will gather visual information for study and modification, analyze images and models, compare and link design documentation in different formats, develop lectures and make presentations from computers in offices, classrooms, and studio work areas. Emphasis will be placed on flexibility, as this particular tool's success will hinge on its ability to respond to different approaches to design and instruction. DOORS proposes to offer three modalities, browsing, composition and presentation, to enable searching, organizati-on, and display. Using established library standards for record format, subject access and keyword indexing, browsing will offer flexible and diverse search criteria. Composition will provide tools for linking, annotation and manipulation of assembled materials. Individual presentations will be viewed in classrooms, studios or offices. A pilot project to assemble some of the basic technology and expertise required is currently under way. The objective of the pilot is to deliver a slice of material over the GSD's local area network in order to raise awareness of the tool's potential among faculty and students, to evaluate its effectiveness, and to formulate technical specifications for later project phases.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9494
id	ddss9494
authors	Thomas, Tom and Saslaw, Karen L.
year	1994
title	Post-Occupancy Evaluations: Research of New Initiatives in Health Care Facilities
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	American health care is undergoing an evolution of epic proportions and medical centres throughout the country are responding by restructuring the delivery of patient care services. Changes in professional staffing, technology and locations of services are just a few actions underway to create operationally efficient, more cost-effective institutions. Facility planning and design is equally challenged to present new facility models for these retooled medical centres. In 2025, American hospitals may bear little resemblance to the imposing medical structures which form this country's historical health facility reference points. This presentation will focus on the use of post-occupancy evaluations to improve innovation of health facility planning and design. We will discuss the use of post-occupancy evaluations to analyze the functional and environmental aspects of operational departmental areas, and the utilization of research conclusions to improve innovation and creativity in the design of new facilities. Ms. Saslaw, a health care administrator and planner, and Mr. Thomas, a health care architect and planner, will introduce the process issues of POE in design, and then present case studies and facility plans which demonstrate the value to new innovative environments. Specifically, individuals attending this session will: (i) understand the contemporary use of post-occupancy evaluations in facility planning and design; (ii) review several cases and discuss alternative facility responses derived from use of post-occupancy evaluations (iii) discuss the "Patient Focus Care" trend and the architects/planners response in improving health facility design.
series	DDSS
last changed	2003/08/07 16:36

_id	ee8b
authors	Yakeley, Megan and Coates, Paul
year	1994
title	The Virtual Ching's Head
doi	https://doi.org/10.52842/conf.ecaade.1994.x.p3b
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 225
summary	The bar in the Architectural Association, named after the bust that sat in one corner, had white formica topped tables. Each day around lunchtime these were cleaned with Vim by the bar staff, ready for the new day’s thought’s, ideas, and occasional inspirations. Students used the bar as an ideal place to discuss their work, the table tops providing an endless supply of virtual napkins waiting not to be used but to be drawn on. This atmosphere of providing a relaxed environment to discuss and debate architectural ideas proved immensly popular, with tea spills adding to the table top sketches. It is often forgotten in the ordered cleanliness of the CAD studio, where the protection of the computers overrides the comfort of their users, that ideas and their development do not always come when we most expect. Providing an atmosphere in which the designer feels comfortable enough to play is as vital now as at the time when the Architectural Association was seen as an ideal place to foster debate. As the architect feels more comfortable, so will the ideas flow more freely. This paper demonstrates how a CAD environment can become the virtual equivalent of a coffee bar as it relates to the design studio, where ideas are thrown around with abandon, and where the discussion of those ideas is more important than the material with which the ideas are depicted. In contrast, the use of computers in design is following along the same path as beautifully descriptive artwork or highly skillful technical drawings, that say much about the presentation abilities of their authors, yet often little about the actual designs. Designers often are so seduced by the medium that they do not properly see the message. A computer’s ability to present three dimesnional form instantly, and the ease with which those forms may be altered, stretched, shrunk, reversed and so on make the computer an ideal sketching tool. This paper shows the results of the combined RIBA Part II and MSc Computing and Design course. This two year, 96 week course is entirely computer based, and uses generative modelling to explore the fundamental nature of the design of form. This paper seeks to show how this approach may be successfully used with some students, and how the approach complements existing teaching methods and techniques. To accompany these notes a computer based presentation will illustrate a variety of past and present student work. This will show how rule based form, and the use of computers as a sketching tool, has influenced the students' working methods and their approach to the creation of form. Finally, we will show that the use of such a formal approach leads inevitably to a greater understanding of, and therefore a greater ability to articulate and illustrate, a student’s own design ideas and proposals. The use of the computer at every stage of the design process forces the student to be entirely explicit about every action as it occurs. Similarly the rule based approach requires them to be explicit about actions they propose to take in the future. This double combination has produced students who are highly articulate about their designs at every stage, and this paper aims to demonstrate that the more articulate the student, the greater is the possibility for success.
series	eCAADe
last changed	2022/06/07 07:50

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	1262
authors	Alshawi, M.
year	1994
title	A run time exchange of component information between CAD and object models: A standard interface
source	The Int. Journal of Construction IT 2(2), pp. 37-52
summary	Integrated computer aided design could only occur in engineering once CAD systems could represent physical features and components rather than graphical primitives. In most dedicated CAD systems, the knowledge of a complete component exists only for the duration of each drawing command and the data stored in the database is simply a set of graphic primitives. This paper proposes an approach for real time information transfer from and to CAD systems based on a high level object representation of the design drawing. Drawing components are automatically identified and represented in an object hierarchy that reflects the 'part-of' relation between the various components including building spaces. Such hierarchies transfer an industry standard CAD system i.e. AutoCAD, into a high level object oriented system that can communicate with external applications with relative ease.
series	journal paper
last changed	2003/05/15 21:45

_id	241b
authors	Anderson, Lee
year	1994
title	Film Theory and Architectural Design
doi	https://doi.org/10.52842/conf.acadia.1994.219
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 219-227
summary	This paper describes a 10 week, 3rd year architectural design studio, taught by the author, that explored the use of film and video techniques in the design process. The exploration was of (1) the potential of recently available personal computer software and hardware for image and video capture, manipulation and recording, and (2) the potential for application of video, informed by film theory, in the early stages of architectural design.
series	ACADIA
last changed	2022/06/07 07:54

_id	ddss9406
id	ddss9406
authors	Bakel, Anton P.M. van
year	1994
title	Assesing Strategy Questionnaire for Architectural Styles of Designing (ASQ-FASD)
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper the first results will be discussed that were obtained by the Assessing Strategy Questionnaire For Architectural Styles of Designing (ASQ-FASD). This questionnaire was developed specifically for the assessment of architectural design strategies. The construction of the questionnaire will be discussed in light of previous protocol research on strategic styles of designing. With this questionnaire, we developed a tool to assess an architects design strategy in a faster, easier and more reliable way than used to be the case with conventional protocol studies and other knowledge eliciting techniques like Card Sorting, and Repertory Grid. This questionnairewas submitted in a pilot study to 10 experienced Dutch architects. R.esults show that architects do indeed have preferences for different design situations. Moreover results indicate that they havea preference with respect to their responses within such specific situations. Though the generalizability coefficient was calculated for no more than 10 architects with a value of .57 (generalizing across situations), we feel that this is reason enough to assume that the questionnaire can be used to assess design strategies of architects. These results will be discussed with respect to the development of new design and decision support tools. The fact that designers have preferences for specific design problems and that they respond differently should be considered in the implementation of user interfaces and data base technology where possible.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9407
id	ddss9407
authors	Barrett, P., Baldry, D., Sexton, M. and Stanley, C.
year	1994
title	Key Decisions Within a Generic FM Framework
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Based on extensive fieldwork a generic framework for the facilities management function will be presented within wich a comprehensive range of decisions related to key relationships will be identified. Examples will be given of the application of the framework to a wide range of organisation types. The decision types(pricipally strategic v operational) and techniques to identify which is being confronted will be prposed. Examples will be provided of how, in practice, different organisations approach a given type of decision in a variety of ways.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9408
id	ddss9408
authors	Bax, Thijs and Trum, Henk
year	1994
title	A Taxonomy of Architecture: Core of a Theory of Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The authors developed a taxonomy of concepts in architectural design. It was accepted by the Advisory Committee for education in the field of architecture, a committee advising the European Commission and Member States, as a reference for their task to harmonize architectural education in Europe. The taxonomy is based on Domain theory, a theory developed by the authors, based on General Systems Theory and the notion of structure according to French Structuralism, takes a participatory viewpoint for the integration of knowledge and interests by parties in the architectural design process. The paper discusses recent developments of the taxonomy, firstly as a result of a confrontation with similar endeavours to structure the field of architectural design, secondly as a result of applications of education and architectural design practice, and thirdly as a result of theapplication of some views derived from the philosophical work from Charles Benjamin Peirce. Developments concern the structural form of the taxonomy comprising basic concepts and levelbound scale concepts, and the specification of the content of the fields which these concepts represent. The confrontation with similar endeavours concerns mainly the work of an ARCUK workingparty, chaired by Tom Marcus, based on the European Directive from 1985. The application concerns experiences with a taxonomy-based enquiry in order to represent the profile of educational programmes of schools and faculties of architecture in Europe in qualitative and quantitative terms. This enquiry was carried out in order to achieve a basis for comparison and judgement, and a basis for future guidelines including quantitative aspects. Views of Peirce, more specifically his views on triarchy as a way of ordering and structuring processes of thinking,provide keys for a re-definition of concepts as building stones of the taxonomy in terms of the form-function-process-triad, which strengthens the coherence of the taxonomy, allowing for a more regular representation in the form of a hierarchical ordered matrix.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9411
id	ddss9411
authors	Bouillé, Francois
year	1994
title	Mastering Urban Network Intersection And Superimposition, in an Object-oriented Knowledge System Integrating Rules, Neurons and Processes
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Many networks cover the urban texture, either superimposed at a variable distance, or really intersecting, or even in interconnection. We briefly recall the HBDS model, working on persistent abstract data types associated to graphical representations and carrying algorithms expressing conditions to be verified and/or actions to be performed. HBDS is an integrated system too, including database, expert system dealing with fuzzy rules and facts, discrete simulation engine, and neural engine; it has a general purpose programming language. Any urban network is associated to a given prototype, according to the same scheme named prototype with more specific components. These prototypes allow to build the different thematic structures instantiations of the prototypes. All possible cases of arc intersection or "pseudo-intersection" (simple superimposition)or interconnection are obtained by, owing to new prototypes. Moreover, such (pseudo)-intersections are automatically recognized and processed without a human intervention, owing to classes ofconstraints and classes of rules. They deal with particular constraints concerning the location of some urban furniture, and rules concerning the way a cable or a pipe must follow according to thepre-existing other networks in a given area, the minimal distances, minimal or maximal depths, and some required equipments. Urban classes of (pseudo-)intersections inserted in the hyperciass"neuron", inheriting of neural features, may be used for automated learning of urban knowledge; owing to their "behavior", these neurons can communicate and perform actions on other components. Urban classes inserted in the hyperciass "process" may be used for building very large models simulating complex urban phenomenons, thus allowing a better understanding of the real phenomenons. As a conclusion, we emphasize the methodological aspects of object-oriented integration for an efficient processing of the urban context, based on prototyping and mixing rules, neurons and processes.
series	DDSS
last changed	2003/08/07 16:36

For more results click below: