Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 336

Reformat results as: short short into frame detailed detailed into frame

_id	6651
id	6651
authors	Chen, N., Kvan, T., Wojtowicz, J., Van Bakergem, D., Casaus, T., Davidson, J., Fargas, J., Hubbell, K., Mitchell, W., Nagakura, T. and Papazian, P.
year	1994
title	PLACE, TIME AND THE VIRTUAL DESIGN STUDIO
doi	https://doi.org/10.52842/conf.acadia.1994.115
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 115-132
summary	A design problem shared over the Internet raises issues of how digital media and group dynamics affect networked design collaborations. This paper describes how to conduct a long-distance studio and compares asynchronous and synchronous collaborative techniques. Digital methods are discussed in relationship to both the creative process and design communication. In schematic stages, less precise tools used asynchronously allow free exploration and creative misreadings, while in later stages, more direct real-time exchanges bring a project to resolution. For the final review, synchronous video-conferencing with interactive graphics allow comparison of cross-cultural differences. Used effectively, these tools can electronically create a compelling sense of place. Ways to foster a strong virtual community are discussed in an agenda for future virtual design.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ddss9474
id	ddss9474
authors	Pereira, A.G., Munda, G. and Paruccini, M.
year	1994
title	Generating Alternatives For Siting Using Genetic Algorithms and Multiple Criteria Decision Techniques
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	It is believed that a fundamental step in the structuring of a siting problem is generating alternati-ves. This task should occur at the beginning of a process for facility location, giving a preliminary insight into the feasibility of the project in the area of concern by identifying a manageable number of feasible alternatives for careful review and consideration. The purpose of this paper is to present a methodology aimed at generating alternatives for siting of facilities taking into account a number of criteria. These criteria comprise environmental, economical and the action's inherent technical aspects. The search is carried out by applying genetic algorithms (GA's) which are natural phenomena based algorithms for optimization and random search procedures. According to the GA's terminology, a fitness function measures the worth of each candidate alternative codified into a chromosome. It was thought that the merging of aspects of multiple criteria theory and genetic algorithms is essential for the problem of generating alternatives in location problems. The aim of this integration is the improvement of the theoretical principles upon which the fitness function is based, leading to the construction of a robust set of alternatives. The paper describes the integration of both multiple criteria theory and GA's and discusses the results.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9421
id	ddss9421
authors	Daru, Roel and Adams, Wim
year	1994
title	Matchmaker: An Instrument for Matching Demand for and Supply of Buildings and Revealing Specific Discrepancies
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	To match supply and demand of buildings, various approaches are possible. While artificial intelligenceis favoured by some, we think that a less 'heavy' approach can be more cost and time efficient. The casewe have chosen to exemplify our approach concerns architectural heritage. To match supply and demandwhile at the same time respecting the constraints imposed by cultural heritage, it is necessary to bringthem together and to effectuate feasibility studies in the shortest possible time. The feasibility study shouldbe served by tools allowing the various partners to communicate on the level of the match between them, translated in terms of spatial organisation and building constraints. In the past years, our designmorphology group has developed and tested a graphic-based reordering tool which has been applied to large governmental buildings, both existing and new. The same tool can be used for weighted objectives ranking and evaluation, to have a synthetic view of the combined basic preferences and differences of the involved parties as for example in a jury wise evaluation and ranking of alternative proposals. The proposed tool is the electronic and graphic version of the data and association matrices, which have been for a long time recommended for use in the preliminary phases of design. But as long as these instruments could only be drawn and redrawn on paper they were much too ineffectual and found little real application. The developed tool is connected by sub-routines to a computer aided design package, within which the spatial patterns are translated into plans and attached data bases. The matching takes place in a number of steps. The first is to describe the organisation (the demanding party) as functional units which can be made corresponding with spatial units. The prescription of spatial needs can take place in both quantitative and qualitative manners. The Matchmaker tools offer the possibility of interactive clustering of spatial needs. Another step, which can be taken concurrently, is to describe the monument in spatial units and distance relationships. The input can be generated directly within the matrix, but it is much easier, more self evident and realistic to generate this automatically from the draughted plan. The following step is the input of constraints originating from heritage preservation objectives, expressed in levels of authorised intervention. Again, the Matchmaker tools offer here the possibility of visual clustering of spatial units, their relationships and associated properties. In the next step, the matching takes place. In this step the actual positions, properties and constraints of existing spaces in the monument are compared (and visualised by discrepancies views) to the optimised and clustered spatial needs of the end user. In the following phase, the feasibility in terms of space, building fabric and costs can be appraised. Once a compromise has been attained, preliminary proposals can be designed and laid down in terms of drawings. The spatialdesigns can then again be translated into matrix views and evaluated.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9429
id	ddss9429
authors	Geerling, Heinrich
year	1994
title	A Proposal for a Framework for Business Re-engineering in Design and Realization of Artificial Environments
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	According to the Top-Down design process', this paper gives a generic and qualitative description of a Concurrent Engineering Environment, that should support the problem solving procedure in town planning and architecture in a modern quality oriented society. A system that is based on the principal of democracy might guarantee the preservation of quality in the projection and realization of artificial environments. This environment can be seen as a part of the today often discussed "digital democracy", which practically is based on a infrastructure of computers, interfaces, software systems, a network, databases and a data presentation, that is able to comprise the expectations of professionals involved in the architecture and town planning process. The paper will discuss what the role of the designer and coordinator of this computer environment looks like,in order to design, plan, build and coordinate activities for the realization of this Concurrent Environment and how several software engineers work concurrently to develop tools that guarantee a modular integration. The backbone of this environment is the definition and use of standards for data exchange. Basically those standards are derived from two domains: artifacts will be described in a product model data, while natural resources are described in spatial data. Town planning has to integrate both models. It will be discussed briefly how far the data modelling language EXPRESS of part 11 of the ISO 10303 (Express Language Reference Manual) might be useful to model GIS related problems. An example will describe how a scenario of activities, from registration of real world data to recognition of requirements of society, the definition of development plans through design(competition), lawfulness checking and construction until demolition should look like.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9464
id	ddss9464
authors	McCartney, Kevin and Ismail, Ashraf Lotfy R. M.
year	1994
title	A Tool for Conceptual Design Evaluation Based on Compliance with Supplementary Planning Guidance and Local Planning Policies
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The need has been established for a computer based decision support tool to use during the conceptual stages of architectural design. The main functions are being designed in order to check design compliance with the requirements of local planning authorities; with regards to building size, height, plot ratios, circulation and accessibility, and the preservation of natural features on site. The measures to determine proper evaluation will be based upon site-development briefs, and design guides produced by the local planning authorities. This tool is being developed to operate under AutoCAD environment; the construction industry standard computer aided design software, following standard layering convention, integrated command lines, and pull-down menus. It will also provide many functions for editing two and three dimensional drawings specifically for the environmental analysis tasks. In addition to the common graphical output of Aut0CAD; i.e. plans, elevations and three dimensional models, the tool will generate textual analysis of the design in report format to use as part of the Environmental Impact Statement of proposed development. The speculative tool's functions will be based upon the result of two types of field studies. First, interviews and questionnaires will be carried out tailor-made for architects and planners of both private and public sectors. These will cover issues related to the performance of Computer Aided Architectural Design applications with regard to the evaluation of design schematics, and decision-making for the production of materials for environmental statements. Second, field observation will be carried out to observe the concerned professionals as decision-makers while assessing building design proposals. A prototype will be designed and then tested against the expectations of the tool designer, then the tool performance will be evaluated by a team of professionals participated in the field studies. A critical analysis of the prototype design methodology and the concluding study findings will be documented as part of a postgraduate research thesis to be completed in June 1995.
series	DDSS
last changed	2003/08/07 16:36

_id	241b
authors	Anderson, Lee
year	1994
title	Film Theory and Architectural Design
doi	https://doi.org/10.52842/conf.acadia.1994.219
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 219-227
summary	This paper describes a 10 week, 3rd year architectural design studio, taught by the author, that explored the use of film and video techniques in the design process. The exploration was of (1) the potential of recently available personal computer software and hardware for image and video capture, manipulation and recording, and (2) the potential for application of video, informed by film theory, in the early stages of architectural design.
series	ACADIA
last changed	2022/06/07 07:54

_id	ddss9406
id	ddss9406
authors	Bakel, Anton P.M. van
year	1994
title	Assesing Strategy Questionnaire for Architectural Styles of Designing (ASQ-FASD)
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper the first results will be discussed that were obtained by the Assessing Strategy Questionnaire For Architectural Styles of Designing (ASQ-FASD). This questionnaire was developed specifically for the assessment of architectural design strategies. The construction of the questionnaire will be discussed in light of previous protocol research on strategic styles of designing. With this questionnaire, we developed a tool to assess an architects design strategy in a faster, easier and more reliable way than used to be the case with conventional protocol studies and other knowledge eliciting techniques like Card Sorting, and Repertory Grid. This questionnairewas submitted in a pilot study to 10 experienced Dutch architects. R.esults show that architects do indeed have preferences for different design situations. Moreover results indicate that they havea preference with respect to their responses within such specific situations. Though the generalizability coefficient was calculated for no more than 10 architects with a value of .57 (generalizing across situations), we feel that this is reason enough to assume that the questionnaire can be used to assess design strategies of architects. These results will be discussed with respect to the development of new design and decision support tools. The fact that designers have preferences for specific design problems and that they respond differently should be considered in the implementation of user interfaces and data base technology where possible.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9407
id	ddss9407
authors	Barrett, P., Baldry, D., Sexton, M. and Stanley, C.
year	1994
title	Key Decisions Within a Generic FM Framework
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Based on extensive fieldwork a generic framework for the facilities management function will be presented within wich a comprehensive range of decisions related to key relationships will be identified. Examples will be given of the application of the framework to a wide range of organisation types. The decision types(pricipally strategic v operational) and techniques to identify which is being confronted will be prposed. Examples will be provided of how, in practice, different organisations approach a given type of decision in a variety of ways.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	0e58
authors	Campbell, D.A. and Wells, M.
year	1994
title	A Critique of Virtual Reality in the Architectural Design Process, R-94-3
source	Human Interface Technology Laboratory, University of Washington, Seattle, USA, http://www.hitl.washington.edu/publications/r-94-3/: 23 May 2001
summary	An addition to a building was designed using virtual reality (VR). The project was part of a design studio for graduate students of architecture. During the design process a detailed journal of activities was kept. In addition, the design implemented with VR was compared to designs implemented with more traditional methods. Both immersive and non-immersive VR simulations were attempted. Part of the rationale for exploring the use of VR in this manner was to develop insight into how VR techniques can be incorporated into the architectural design process, and to provide guidance for the implementers of future VR systems. This paper describes the role of VR in schematic design, through design development to presentation and evaluation. In addition, there are some comments on the effects of VR on detailed design. VR proved to be advantageous in several phases of the design. However, several shortcomings in both hardware and software became apparent. These are described, and a number of recommendations are provided.
series	other
email
last changed	2003/04/23 15:50

_id	ee50
authors	Campioli, Andrea and Talamo, Cinzia
year	1994
title	IPERTEC: Hypertext Information System for Dry-assembled Building Elements
doi	https://doi.org/10.52842/conf.ecaade.1994.x.b3p
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 239
summary	The experience presented concerns the study of advanced information tools for design disciplines teaching. The objectives pursued are: on one hand self-teaching according to methods that go beyond traditional technical manuals and specialized texts and that give a systemic view of the strict connections between technological culture and design poetics; on the other hand assistance during design exercises as far as references assumption and deep analysis of technical and architectural topics are concerned. The result of the research is the information system Ipertec, a hypertext handbook with didactic purposes allowing students to approach executive techniques of dry assembly.
series	eCAADe
last changed	2022/06/07 07:50

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	28f1
authors	Carrara, Gianfranco, Kalay, Yehuda E. and Novembri, Gabriele
year	1994
title	Knowledge-Based Computational Support for Architectural Design
doi	https://doi.org/10.52842/conf.acadia.1994.005
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 5-12
summary	The process of architectural design aims to define a physical form that will achieve certain functional and behavioral objectives in a particular context. It comprises three distinct, but highly interrelated, operations: (1) Definition of the desired objectives; (2) production of alternative design solutions; (3) evaluation of the expected performances of the solutions and their comparison to the predefined objectives. Design can be viewed as a process of search for a solution that satisfies stated needs, while at the same time adapting the needs to the opportunities and limitations inherent in the emerging solution. // Computational techniques were developed to assist each one of the three operations, with varying degrees of success. We propose to integrate all three operations into one whole, by developing a computational model that will facilitate smooth transition from one operation to another. The role of computers in supporting this model will include providing a knowledge base of prototypical design objectives and solutions, storing project-specific design goals and solutions, and predicting their expected performances. This paper discusses the rationale and background for developing such a knowledge-based design system, and presents the parameters for implementing it as a computational tool to support architectural design. Examples from a prototype implementation serve to illustrate the discussion.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ddss9417
id	ddss9417
authors	Chan, Chiu-Shui
year	1994
title	A Hypermedia Tutoring for Multimedia Tasks
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Using a computer or a software package involves procedural knowledge, or knowledge of a series of instructions. When a user recognizes the appropriate computer commands (the method) in acertain application, it is assumed that the user is capable of doing a computer-related or computeraided task. Based on this assumption, the current project explores methods of developing a computer tutoring system to convey know-how efficiently. The purpose of the project is to make novices familiar with machines and with techniques of handling multimedia for presenting design concepts. A teaching tool is designed that combines images, sounds, and movements to create an effective learning environment. The tool is a hypermedia system consisting of different software and hardware components implemented in the HyperCard. How to manipulate different media will be taught by means of cross-references, graphic display, text explanations, and background music. Hopefully, this project will suggest some useful methods for teaching CAD to novice computer users.
series	DDSS
email
last changed	2003/08/07 16:36

_id	7ed5
authors	Corne, D., Smithers, T. and Ross, P.
year	1994
title	Solving design problems by computational exploration
source	J. S. Gero and E. Tyugu (eds), Formal Design Methods for CAD, NorthHolland, Amsterdam, pp. 249-270
summary	Most real-world problems, especially design problems, are ill-structured, but formal approaches to problem-solving in AI have only really made progress into techniques for solving well-structured problems. Nevertheless, such research contains clues which illuminate the way towards formal approaches to solving ill-structured problems. This paper presents the foundations of an approach towards developing a better computational understanding of ill-structured problems and how to solve them computationally, with the eventual aim of giving AI problems a much greater and more useful role in the design process. The main issues which come up in this endeavour are the notions of different kinds of ill-structuredness, and the meaning of a 'solution' to an ill-structured (and hence possibly insoluble) problem. Some basic algorithmic recipes are proposed for dealing with the main kinds of ill-structuredness, and the initial design of a general computational technique which deals with general ill-structuredness is discussed.
series	other
last changed	2003/04/23 15:14

_id	ddss9422
id	ddss9422
authors	Daru, Roel and Snijder, Philip
year	1994
title	Sketch-Trigger: A Specification for a Form Generator and Design Analysis Toolbox for Architectural Sketching
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In order to develop design and decision support techniques in the early sketch design phases, weshould (1) experience and (2) observe real behaviour in practice, (3) transform observations intoideas for improvement, (4) develop behaviour models to explain the sketch design activities and(5) to evaluate between the proposals, (6) decide between the alternatives, (7) implement theselected option in a supporting tool. Our paper reports about the results of step 3 in particular inthe first phase of a Ph D project, started this year. Our main objective is to amplify the effects ofthe sketch as a very effective instrument to generate original forms and to stimulate the mind to discover new shapes and meanings in the roughly sketched patterns. Instead of considering the sketch only as a representation of what the designer has in mind as is usually assumed in CAD systems, we see sketching as form activation. Thus, we want also to offer triggering images to spark off the imagination of the designer while generating images which are practically impossibleto create by hand and certainly not at short notice. The main improvement proposed is the use of an evolutionary form breeding system: one or more sketched parent images (either ready-made'partis' or basic schemes drafted by the designer) presented in the centre of the screen, will generate surrounding mutated children as defined at random but constrained by default or customization of the available transformations. By selecting one or more children a next generation will be produced in the same way. At all times the designer can introduce or reduce constraints. To complete the usually offered 'classical' symmetrical, spatial and logical operations,we want to introduce dis-functional operations like dislocation, explosion, deformation, anti-logic etc, in short all kinds of antagonistic operations, among them the transformations applied indeconstructionist and post-modern design. Our expectation is that these operations will correspond roughly to the 'move' pertaining to a design entity as the operational unit most appropriate for design behaviour research, in particular the analysis of the chunking and parsing behaviour of the designer. The applicability of the 'move' approach has been shown experimentally by Habraken and others. Goldschmidt has abandoned the usual typology approach of protocolanalysis based on moves and concentrated on the linking of moves, but has been hampered by the lack of a good representational instrument. This brings us to the representation of moves and linkages as a research instrument. The 'linkograph' approach as proposed by Goldschmidt is a first step towards a graphical representation of the designers associative reasoning mode, necessary for tracking the heuristics of designers at the most basic level, but its practical implementation remained as yet incredibly laborious. What is proposed here is an instrument and approach which makes such registration and analysis possible within a structured software environment.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9428
id	ddss9428
authors	Erturk, Scvinc and Erturk, Zafer
year	1994
title	Historical Background of the Visual Simulation Models in Architectural Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	It is well known that every sort of visualization model has its own capacity to represent the reality and designers' concepts of space. To the authors' knowledge, there are very few attempts to measure and compare their relative potential power of presentation. Given this lack of academic studies, it would be necessary to give a historical background on the use of visual models. Basically those tools could be divided into two main types : traditional visula techniques such as drawings , scale models and most advance technological tools ranging from basic slidesand films to recentlydeveloped techniquessuch as relatoscope, and computer aided simulation models. This paper covers the historical background of visual models .
series	DDSS
last changed	2003/08/07 16:36

_id	ecaadesigradi2019_027
id	ecaadesigradi2019_027
authors	Erzetic, Catherine, Dobbs, Tiara, Fabbri, Alessandra, Gardner, Nicole, Haeusler, M. Hank and Zavoleas, Yannis
year	2019
title	Enhancing User-Engagement in the Design Process through Augmented Reality Applications
doi	https://doi.org/10.52842/conf.ecaade.2019.2.423
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 423-432
summary	Augmented Reality (AR) technologies are often perceived as the most impactful method to enhance the communication between the designer and the client during the iterative design process. However, the significance of designing the User Interface (UI) and the User Experience (UX) are often underestimated. To intercede, this research aims to employ new and existing techniques to develop UI's, and comparatively assess "the accuracy and completeness with which specified users can achieve specified goals in particular environments" (Stone, 2005) - a notion this research delineates as 'effectiveness'. Prompted by the work of key scholars, the developed UI's were assessed through the lens of existing UI evaluation techniques, including: Usability Heuristics (Nielsen, 1994) and Visual and Cognitive Heuristics (Zuk and Carpendale, 2006). In partnership with PTW Architects, characteristics such as the rapidity and complexity of interactions, in conjunction with the interface's simplicity and intuitiveness, were extracted from 15 trials underwent by architectural practitioners. The outcomes of this research highlights strategies for the effective development of user interface design for mobile augmented reality applications.
keywords	User Interface; Human Centered Design; User Experience; Heuristics; Usability Inspection Method
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	8708
authors	Fernández, A., Bustinza, J. and Aranda, E.
year	1994
title	The Electronic Aleph: Borges on the Virtual Studio
doi	https://doi.org/10.52842/conf.ecaade.1994.x.g7d
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 216
summary	Current design process and communication in architecture are being challenged by the use of computing techniques.
series	eCAADe
last changed	2022/06/07 07:50

For more results click below: