Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 350

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ddss9462
id	ddss9462
authors	Liggett, Robert S. and Jepson, William H.
year	1994
title	Implementing an Integrated Environment for Urban Simulation CAD, Visualization and GIS
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Using technology which has been adapted from military flight simulation hardware and software, researchers at UCLA's Graduate School of Architecture and Urban Planning are currently developing an integrated computing environment for Urban Simulation which includes a high-level visual simulation package, an industry standard CAD system, and a traditional two dimensional geographic information system and data bases. The focal point of the integrated system is a visual simulation engine which has been developed using Silicon Graphics' IRIS Performer application development environment. With this system, aerial photographs can be combined with street level video to efficiently create a realistic (down to plants, street signs and the graffiti on the walls) model of an urban neighbourhood which can then be used for interactive fly and walk-through demonstrations. Links have been established between this visual simulation system and AutoCAD to allow models (at varying levels of detail) to be generated using the CAD system and translated into the form required for the visualization system. Links between the GIS system (in this case ARC/INFO and ARCVIEW) and the visual simulation system provide the capability for dynamic query and display of information from the GIS data base in a real-time 3-dimensional format. Links between the CAD and GIS systems allow common base maps to be used for the GIS and modelling systems as well as automatic generation of 3-d form. While an earlier paper by the authors discussed proposed strategies for such an Urban Simulation System, this paper focuses on the results of actual implementation of these strategies, as well as the use of the system for modelling, exploration and display of alternative physical environments.
series	DDSS
email
last changed	2003/08/07 16:36

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	ddss9453
id	ddss9453
authors	Krafta, Romulo
year	1994
title	Urban Configuration, Attraction And Morphology
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Spatial Interaction (SI), based on the principle of attraction, has set up a powerful way of looking at the behaviour of urban systems. Within-place activities generate and/or attract trips, due to their inner fragmentary nature; several activities articulate a system of locations and flows which is supposed to be regulated by concentration of those activities and distance between them'. SI has been criticized for having a poor theory and little regard to spatial specifics. In general terms, planners and large-scale urban scientists have been more comfortable with it than designers and urban morphologists, whose questions about space configuration are awkwardly dealt with in such a framework. Recently, Space Syntax (SS) has been suggested as an alternative to describe possible roles of space in the urban system. Its theory looks very complex - a deep cultural, anthropological connection between man and space, an atavistic impulse driving the shaping of space. Teklenburg et al have shown, however, that it is, in fact, very simple and not far from the rude assumptions of SI: a matter of distance and orientation3. Hence, what does look new is just its way of describing orientation, through the axiallity of public space. Axial lines retain the fundamental issue of connectivity; so they describe space more efficiently than the traditional zones or links used in SI models. SI says little about configuration, SS says little about interaction between spaces and activities, and both say nothing about morphology, or the configurational development of urban systems. An alternative approach is suggested: (i) urban spatial configurati-on (urban grid and built form) strongly conditions activity location and flows, in the short term. In this way, a convenient description of such a configuration should denounce its potential to housing activities and generate flows. This required description should take the grid axiallity as a measure of connectivity and orientation, as in SS, as well as the built form as a measure of attraction, as in SI; (ii) activity location and flows strongly conditions urban spatial configuration change, in the long run. Location and flow patterns create values that are expressed by an increasing conflict between rising land values and declining building values. As a result, configuration is taken as a particular state of a morphology whose transformation rules are an economic expression of spatiality. Flows are cause and effect in the lagged process of mutual transformation which shapes the urban space.
series	DDSS
email
last changed	2003/08/07 16:36

_id	99ec
authors	Woodruff, A. (et al.)
year	1994
title	Zooming and tunneling in Tioga: supporting navigation in multidimensional space
source	Techn. report UCE 94/48, University of California, Berkeley
summary	In [STON93] we proposed a visual programming system called Tioga. The Tioga system applies a boxes and arrows programming notation to allow nonexpert users to graphically construct database applications. Users connect database procedures using a dataflow model. Browsers are used to visualize the resulting data. This paper describes extensions to the Tioga browser protocol. These extensions allow sophisticated, flight- simulator navigation through a multidimensional data space. This design also incorporates wormholes to allow tunneling between different multidimensional spaces. Wormholes are shown to be substantial generalizations of hyperlinks in a hypertext system. These powerful mechanisms for relating data provide users with great flexibility. For example, users can create magnifying glasses that provide an enhanced view of the underlying data.
series	report
last changed	2003/04/23 15:14

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ddss9405
id	ddss9405
authors	Ayeni, Bola
year	1994
title	The Design of Decision Support Systems in Urban and Regional Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Planning methodology over the years, has shifted from situations whereby planners think, plan and design for the people to one whereby both people and planners have become important components of the planning process. Consequently, the important urban planning methodology of the last two decades that utilized mathematical models in the planning process is fast becoming obsolete. The paper argues that model building should move to the creation of urban decision support systems for the planning process through the development of expert systems shells that interfaces existing planning models with the knowledge content of planning and planners. The expert system shells as the set of decision rules for determining how existing supply and demand relationships are applied for modelling land use and transportation would be responsible forguiding the development of appropriate geographical information systems, supporting land use and other models in a coordinated manner, for communicating with these other systems componentsand for guiding interactions between them and the user. Furthermore, decision support systems should be designed to bring the whole of the knowledge base to bear on a problem through a flexible and adaptive solution system that makes explicit use of both the analysts models and the decision makers expert knowledge. It is argued that this understanding leads to the development of three crucial issues for the design of decision support systems in urban and regional planning;namely the development of user friendly integrated urban land-use transportation models, the development of expert geographical information systems and the development of expert systemshells for many of the routine tasks planners deal with.
series	DDSS
last changed	2003/08/07 16:36

_id	sigradi2008_049
id	sigradi2008_049
authors	Benamy, Turkienicz ; Beck Mateus, Mayer Rosirene
year	2008
title	Computing And Manipulation In Design - A Pedagogical Experience Using Symmetry
source	SIGraDi 2008 - [Proceedings of the 12th Iberoamerican Congress of Digital Graphics] La Habana - Cuba 1-5 December 2008
summary	The concept of symmetry has been usually restricted to bilateral symmetry, though in an extended sense it refers to any isometric transformation that maintains a certain shape invariant. Groups of operations such as translation, rotation, reflection and combinations of these originate patterns classified by modern mathematics as point groups, friezes and wallpapers (March and Steadman, 1974). This extended notion represents a tool for the recognition and reproduction of patterns, a primal aspect of the perception, comprehension and description of everything that we see. Another aspect of this process is the perception of shapes, primary and emergent. Primary shapes are the ones explicitly represented and emergent shapes are the ones implicit in the others (Gero and Yan, 1994). Some groups of shapes known as Semantic Shapes are especially meaningful in architecture, expressing visual features so as symmetry, rhythm, movement and balance. The extended understanding of the concept of symmetry might improve the development of cognitive abilities concerning the creation, recognition and meaning of forms and shapes, aspects of visual reasoning involved in the design process. This paper discusses the development of a pedagogical experience concerned with the application of the concept of symmetry in the creative generation of forms using computational tools and manipulation. The experience has been carried out since 1995 with 3rd year architectural design students. For the exploration of compositions based on symmetry operations with computational support we followed a method developed by Celani (2003) comprising the automatic generation and update of symmetry patterns using AutoCAD. The exercises with computational support were combined with other different exercises in each semester. The first approach combined the creation of two-dimensional patterns to their application and to their modeling into three-dimensions. The second approach combined the work with computational support with work with physical models and mirrors and the analysis of the created patterns. And the third approach combined the computational tasks with work with two-dimensional physical shapes and mirrors. The student’s work was analyzed under aspects such as Discretion/ Continuity –the creation of isolated groups of shapes or continuous overlapped patterns; Generation of Meta-Shapes –the emergence of new shapes from the geometrical relation between the generative shape and the structure of the symmetrical arrangement; Modes of Representation –the visual aspects of the generative shape such as color and shading; Visual Reasoning –the derivation of 3D compositions from 2D patterns by their progressive analysis and recognition; Conscious Interaction –the simultaneous creation and analysis of symmetry compositions, whether with computational support or with physical shapes and mirrors. The combined work with computational support and with physical models and mirrors enhanced the students understanding on the extended concept of symmetry. The conscious creation and analysis of the patterns also stimulated the student’s understanding over the different semantic possibilities involved in the exploration of forms and shapes in two or three dimensions. The method allowed the development of both syntactic and semantic aspects of visual reasoning, enhancing the students’ visual repertoire. This constitutes an important strategy in the building of the cognitive abilities used in the architectural design process.
keywords	Symmetry, Cognition, Computing, Visual reasoning, Design teaching
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	45f0
authors	Coleman, Kim
year	1994
title	Synergism and Contingency: Design Collaboration with the Computer
doi	https://doi.org/10.52842/conf.acadia.1994.209
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 209-217
summary	The outcome of an architectural project is always contingent, dependent upon conditions or events that are not established at the outset. A university design studio does not easily replicate the state of flux which occurs as an architectural commission proceeds. In developing an architectural project, each new situation, whether it be a building code issue, an engineering issue, or a client reaction, must be viewed as an opportunity to further refine and develop the design rather than a hindrance to the outcome. In the design studio I describe in this paper, students test processes which attempt to take advantage of contingent conditions, opening up the design solutions to new possibilities. As a means to open up the design process to new possibilities, this studio introduces the computer as the primary tool for design exploration. Through the computer interface, the work speculates on the possibilities of synergism, defined as the actions of two or more substances or organisms to achieve an effect of which each is individually incapable.' Three synergetic conditions are explored: that between the designer and the computer, that between the designer with computer and designers of previous works of art or architecture, and that between two or more designers working together with the computer. The lack of a predictable result, one that may be obvious or superficial, is a positive byproduct of the synergetic and contingent circumstances under which the designs are developed.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	a378
authors	Friedell, M., Kochhar, S., Marks, J., Sistare, S. and Weitzman, L.
year	1994
title	Cooperative design, Human-computer interaction, Interaction techniques, Graphical user interfaces, Design automation, Design methodologies, Automated design of graphical displays, Computer-aided design
source	Proceedings of ACM CHI'94 Conference on Human Factors in Computing Systems 1994 v.2 pp.187-188
summary	Computer-aided-design (CAD) systems are now used to design all kinds of artifacts, from jet fighters to works of art. A major challenge in the design of a CAD system itself is the user interface (UI). Developing the UI to a CAD system raises myriad questions about input devices and techniques, display devices and techniques, and the details of the dialogue that relates the two. But these questions are ancillary to one central question: what is the fundamental nature of the interaction between human and computer in the design process supported by the CAD system? Is the design activity essentially manual, with the computer playing the role of passive tool, like a pen or paintbrush? Or is the computer augmenting the human designer by actively restricting available design choices, or by playing the role of critic or "improver"? Or maybe the interaction paradigm is one of "interactive evolution," in which the computer is responsible for generating design alternatives, with the human merely choosing among choices suggested by the machine. Or perhaps the computer performs the design process completely automatically, with a final acceptance check being the only human contribution? The panelists will describe these different paradigms for human-computer cooperation in a set of related CAD systems and prototypes and discuss the conditions under which each paradigm might be most useful.
series	other
last changed	2002/07/07 16:01

_id	ddss9439
id	ddss9439
authors	Halin, G., Bignon, J.C. and Leonard, D.
year	1994
title	Contributions of a Complex Object Retrieval Model to a Dynamical Architectural Design Process
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	When a new Architectural Construction Project starts, all the steps of the technical design are completely redefined. The experience gained in old projects is not easily reusable. Only personal experience of each project member is relevant. The global experience of a project is difficult to manage and to define. The designers of new project have many things to learn from previous experiences that may or not be good. The use of experiences may avoid either looking for asolution to previously resolved problems or making the same mistakes. To realise experience reuse during an architectural technical design we proposed to combine two actual research works:(i) a Dynamical Architectural Construction Process (DACP), (ii) a Complex Object Management System (COMS). The first work puts forward an original construction process based on a model that uses a geometrical definition of an architectural object to produce the constructive definition of this same object. The original features of this model are: (i) the insertion of a logic level between the volume level of an architectural object and its element level, (ii) dynamic management of the different representations of an architectural object during its technical life cycle. The COMS capabilities concern memorisation and retrieval of complex objects. The use of classicalData Management Systems to store these objects is either impossible or unusable due to data dispersion. In our approach, an architectural experience is viewed as an complex object. The COMS manages an Object Base which contains different Architectural Construction Experiences in previous projects forms. At any time during the DACP, the designer can asked the COMS to retrieve a part or a whole of a previous project that illustrates its current technical state. Thearticle presents two research projects and a study of the contribution of experience reuse in a construction process.
series	DDSS
email
last changed	2003/08/07 16:36

_id	caadria2018_365
id	caadria2018_365
authors	Ham, Jeremy J.
year	2018
title	Exploring the Intersection of Music and Architecture Through Spatial Improvisation
doi	https://doi.org/10.52842/conf.caadria.2018.1.121
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 121-130
summary	Creative practice design research brings forth rich opportunities for the exploration of inter-domain connections between music and architecture. Through inter-disciplinary creative practice explorative project work founded on a methodology of improvisation on the digital drum kit, two stages of design research project work are outlined. In the first stage, a language of polyrhythmic drumming is parametrically spatialized as a reflective lens on an extant creative practice. From here, a new form of 'Spatial Improvisation' is explored, where conceptual spatial forms are generated from improvisations on the digital drum kit. This new musico-spatial design practice involves mediating a spatio-temporal-dynamical 'Y-Condition (Martin, 1994)' wherein temporal and dynamic design decisions translate from the musical domain into the spatial domain through 'spatial thinking-in-action'.
keywords	Music and Architecture; Design Research ; Spatial Improvisation; Design Process; Parametric Digital Design
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ddss9444
id	ddss9444
authors	Hill, Shauna and Streilein, André
year	1994
title	Architectural Photogrammetry & Knowledge-Base Systems Record & Redevelopment
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In redevelopment projects, the purpose of heritage recording is part of an investigative process to achieve understanding about structures so that designers can make the appropriate design decisions. It is desirable to integrate the knowledge of the recording and documentation specialist, who has first-hand knowledge of the building, with the interpretative process of evaluating the building information and making design decisions. New developments in the fields of photogram-metric recording and computer science has led to improved "image understanding". This paper describes research that is the result of exploring the concept of integrating new digital photogram-metric recording processes with an automated expert evaluation tool. The goal of this research is to expedite the acquisition of heritage building information for use by a knowledge-based system capable of providing the designer with building performance evaluations. Photogrammetry records all data as a series of three-dimensional coordinates which make it a natural partner for today's three-dimensional CAD systems. Generating a three-dimensional model of architecturally significant physical forms and details can provide a basis for evaluation, understanding, education, and design. The purpose of knowledge-based systems in construction is to enhance the decision-making process with specialized knowledge and experience. The linkage of CAD databases with knowledge-based systems provides a source of input data, such as a three-dimensional model, significant to a particular problem. This research is a collaborative effort between two groups, the Swiss Federal Institute of Technology in Zurich Switzerland, and the University of Manitoba in Winnipeg, Canada.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9446
id	ddss9446
authors	Horgen, Turid
year	1994
title	Post Occupancy Evaluation as a Strategy to Develop an Improved Work Environment
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	A post-occupancy evaluation is a formal way of finding out whether a recently occupied, remodelled, or built environment is performing, as was intended in its programming or design, and a term which has been developed in the professional field in the United States over the last 20 years. The Scandinavian approach to the same question has emphasised surfacing the values of the users of the work environment as a tool for a more comprehensive approach to space planning and design. A recent case-study of the Taubman Building at Harvard University's John F. Kennedy School of Government was aimed at blending the two strategies for evaluation, defined postoccupancy evaluation as a dialogue with the client, as a process to help the client reflect on spatial and technological improvements, or alternate strategies for organisational locations in buildings, and offers an interesting example of a possible future direction for POE's. Sheila Sheridan, Director of Facilities and Services at the Kennedy School, commissioned the case-study, and has been using it result in her daily work. Jacqueline Vischer, who has developed a survey of seven key dimensions of work-place comfort for commercial office buildings throughout eastern North America, and Turid Horgen, who has developed tools for participatory environmental evaluation and programming, widely used in Scandinavia, carried out the study and facilitated the evaluation process. The study is also done in the context of the ongoing research on these issues in the design Inquiry Group at the School of Architecture and Planning at MIT, which is involved in a larger program for developing strategies and tools for more effective programming and management of corporate space. This research defines the workplace environment as the interaction between four dimensions: space, technology, organisation and finance. Our approach is to integrate programming and evaluation with organisational planning and organisational transformation.Post occupancy evaluation is seen as a way to inform the client about his organisational culture as he manages the fit between a facility and its uses, and as one of several tools to bridge the frameworks and viewpoints and the many "languages" which are brought into the decision making process of designing the built environment.
series	DDSS
last changed	2003/08/07 16:36

_id	caadria2004_k-1
id	caadria2004_k-1
authors	Kalay, Yehuda E.
year	2004
title	CONTEXTUALIZATION AND EMBODIMENT IN CYBERSPACE
doi	https://doi.org/10.52842/conf.caadria.2004.005
source	CAADRIA 2004 [Proceedings of the 9th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] Seoul Korea 28-30 April 2004, pp. 5-14
summary	The introduction of VRML (Virtual Reality Markup Language) in 1994, and other similar web-enabled dynamic modeling software (such as SGI’s Open Inventor and WebSpace), have created a rush to develop on-line 3D virtual environments, with purposes ranging from art, to entertainment, to shopping, to culture and education. Some developers took their cues from the science fiction literature of Gibson (1984), Stephenson (1992), and others. Many were web-extensions to single-player video games. But most were created as a direct extension to our new-found ability to digitally model 3D spaces and to endow them with interactive control and pseudo-inhabitation. Surprisingly, this technologically-driven stampede paid little attention to the core principles of place-making and presence, derived from architecture and cognitive science, respectively: two principles that could and should inform the essence of the virtual place experience and help steer its development. Why are the principles of place-making and presence important for the development of virtual environments? Why not simply be content with our ability to create realistically-looking 3D worlds that we can visit remotely? What could we possibly learn about making these worlds better, had we understood the essence of place and presence? To answer these questions we cannot look at place-making (both physical and virtual) from a 3D space-making point of view alone, because places are not an end unto themselves. Rather, places must be considered a locus of contextualization and embodiment that ground human activities and give them meaning. In doing so, places acquire a meaning of their own, which facilitates, improves, and enriches many aspects of our lives. They provide us with a means to interpret the activities of others and to direct our own actions. Such meaning is comprised of the social and cultural conceptions and behaviors imprinted on the environment by the presence and activities of its inhabitants, who in turn, ‘read’ by them through their own corporeal embodiment of the same environment. This transactional relationship between the physical aspects of an environment, its social/cultural context, and our own embodiment of it, combine to create what is known as a sense of place: the psychological, physical, social, and cultural framework that helps us interpret the world around us, and directs our own behavior in it. In turn, it is our own (as well as others’) presence in that environment that gives it meaning, and shapes its social/cultural character. By understanding the essence of place-ness in general, and in cyberspace in particular, we can create virtual places that can better support Internet-based activities, and make them equal to, in some cases even better than their physical counterparts. One of the activities that stands to benefit most from understanding the concept of cyber-places is learning—an interpersonal activity that requires the co-presence of others (a teacher and/or fellow learners), who can point out the difference between what matters and what does not, and produce an emotional involvement that helps students learn. Thus, while many administrators and educators rush to develop webbased remote learning sites, to leverage the economic advantages of one-tomany learning modalities, these sites deprive learners of the contextualization and embodiment inherent in brick-and-mortar learning institutions, and which are needed to support the activity of learning. Can these qualities be achieved in virtual learning environments? If so, how? These are some of the questions this talk will try to answer by presenting a virtual place-making methodology and its experimental implementation, intended to create a sense of place through contextualization and embodiment in virtual learning environments.
series	CAADRIA
type	normal paper
last changed	2022/06/07 07:52

_id	ddss9448
id	ddss9448
authors	Kane, Andy and Szalapaj, Peter
year	1994
title	Intuitive Analysis as Mediator Between Concept and Representation
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Representation in Computer Aided Architectural Design Systems has to date largely focused on the presentation of the end product of design activity, namely the ultimate built form. In thisrespect, 3-dimensional representations traditionally associated with CAAD visualization have relied heavily upon verisimilitude for their efficacy, and have therefore necessitated high levels of dimensional accuracy together with exhaustive description, both of which are absent in the early stages of design formulation. This paper investigates the desired structure of a computational design formulation system which is based, not upon the representation (or presentation) of ultimate form, but instead upon the representation of architectonic ideas resident in the designer's mind, which are central to the organization and generation of proposals. These ideas are of two kinds: conceptual generators, both poetic and architectonic, and the organizational parti or schematic proposals, which embody them. The representation of ideas rather than end form has two primaryobjectives. Firstly, it enables the designer's realization and clarification of concept or parti, and secondly, but most importantly, it enables the designer to critically assess these ideas in relation tothe contextual situation and brief. The computational representation must be structured in a manner which supports the designer's intuitive critical assessment of it, to in turn induce a modification and development of the initial design ideas. Repeated transformation, representation, and intuitive analysis, can then continue in a cyclical manner until an end proposal is achieved. Intuitive analysis, which becomes the mediator between idea and representation, is itself computationally supported by the dual methodologies of comparative and modal superimposition. Superimposition of previous with present representation (either in two or three dimensions)enhances comparative assessment of design developments. Modal analysis, on the other hand, facilitates the superimposition of schematic representations of modes of design thought (circulationpattern with volumetric arrangement, say) in order to intuitively assess their interaction or conflict.
series	DDSS
email
last changed	2003/08/07 16:36

For more results click below: