Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 356

Reformat results as: short short into frame detailed detailed into frame

_id	64ec
authors	Kosco, Igor and Furdik, Juraj
year	1994
title	CAD in Slovak Architectural Education and Practice
doi	https://doi.org/10.52842/conf.ecaade.1994.047
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 47-51
summary	This paper describes experience with Computer Aided Architectural Education and other modern tools such as visualization, animation and multimedia presentation in Slovak architectural education and practice. The process of learning to use these computer tools started, in fact, only five years ago. Today it has become one of the most interesting and powerful areas in education, research and practice.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	0726
authors	Kadysz, Andrzej
year	1994
title	CAD the Tool
doi	https://doi.org/10.52842/conf.ecaade.1994.x.k7r
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 212
summary	What is the role of CAAD as a tool of architectural form creation ? We used to over-estimate the role of computer as significant factor of design process. In fact it serves only to produce technical documentation and to visualise designed buildings. We usually use CAAD to record ideas, not to create designs. We use it like more complex pencil. But it is unsuitable for conceptual design , with imperceptible influence on idea definition. Its practical usefulnes is limited. I would like to consider and find out reasons of that state, present some conclusions and ideas on computer aided architectural form creation. Many tools were invented to extend posibilities of human body or intellect. Microscop and telescop are extensions of human eye. Which organ is extended by computer (especially by CAAD)? CAAD with high developed function of visualising of the object beeing designed seems to be an extension of architect's imagination. It is beeing used to foresee visual efects, to check designed forms, to see something what we are not able to imagine. It performes the role of electronic modeler. Real model and virtual model - the medium of presentation is diferent but ways of using them are similar . Dislocation of place where we build model is not a big achievement, but potential possbilities of CAAD in modeling are almost unlimited (?). What are special features of CAAD as a modeling tool? First we have to consider what is indispensible when building a model: to embody idea. To do this we need space, substance and tools. In architectural design practice space is a real site with definite climate, neigbourhood, orientation. Substance that we shape is an archiectural form composed of many difrent elements: walls, windows, roof, entry, ... , proportions, rhythm, emotions, impresions... The tool is: our knowledge, imagination, talent, experience, norms, law and drawing equipment. Working with the computer, making virtual model, we have many of mentioned elements given in structure of CAAD program and interpreted by it. But many of them have different character. Making traditional dummy of building we operate on reality which is manually accessible. In case of computer model we operate on information. Space, substance and tool (- program) are informations, data. Human being is not an abstract data processor, but creature that lives non stop in close, direct, sensual contact with nature. By this contact with enviroment collects experiences. Computer can operate on digital data that is optionally selected and given by user, independent upon enviromental conditions. Usually architecture was created on basis of enviroment, climate, gravity. But these do not exist in CAAD programs or exist in the symbolic form. Character of these conditions is not obvious. We can watch demeanour of objects in gravity but it can be also antigravity. In theory of systems everything is considered as a part of biger system. In "virtual" reality (in computer space) we deal with accurences which are reduced to abstract level, free upon terms or connections. We work with our CAAD software using geometric space whithout any other principle.
series	eCAADe
last changed	2022/06/07 07:50

_id	6f6a
authors	Lyons, Arthur and Doidge, Charles
year	1994
title	The Animation of Dynamic Architecture
doi	https://doi.org/10.52842/conf.ecaade.1994.x.q6a
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 233
summary	The most valuable resource in education is student time and the greatest asset is the ingenuity of student minds. CAD technology now offers enormous potential to education, but limitations in time and funding, prevent its use to the extent possible within practice. Therefore, after dealing with 'awareness', 'attitude' and 'limited applications', our most important role in education is to encourage innovation. The third year of the honours option course at De Montfort University takes this as its theme and challenges students to explore and exploit innovative applications. One particular area of development has been exploring the dynamic aspects of architectural design which go much further than the well-established 'fly-through' sequences. A great deal of architectural design and design development depends upon dynamic issues which range from movement joints to construction sequence. A visual understanding of these dynamic issues drawn from appropriate computer animations can now be an effective factor in design.
series	eCAADe
last changed	2022/06/07 07:50

_id	cbed
authors	Yakubu, G.S.
year	1994
title	Maximising the Benefits of CAD Systems in Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u8n
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 228
summary	The positive impact of Computer Aided Design (CAD) in professional architectural practice has been in focus in recent times but relatively little has been written on its significance in the education of the contemporary architect. It is common knowledge that the profession of architecture is currently undergoing enormous strains as it battles to keep abreast of trends and developments in a period of series of rapid advancement in science, technology and management (RIBA, 1992). Whilst attempts are being made to redress the shortcomings of the profession in the above context, the requirements for architectural education are yet to forge a coherent strategy for the implementation of CAD/IT in the curriculum of schools of architecture. In almost every other field, including engineering, medicine and the humanities, computing application to problem-solving and decision-making is seen as a way forward as we move into 21st century. Architectural education must integrate CAD/IT into the teaching of core modules that give the architect distinctive competence: studio design. That is one of the best ways of doing justice to the education of the architect of today and the future. Some approaches to the teaching of CAD in schools of architecture have been touched upon in the recent past. Building upon this background as well as an understanding of the nature of design teaching/learning, this paper examines ways of maximising the benefits of CAD systems in architectural education and of bringing computer aided designing into the studio not only to enhance design thinking and creativity but also to support interactive processes. In order to maximise or optimise any function, one approach is to use the hard systems methodology which utilises analytic, analogic and iconic models to show the effect of those factors which are significant for the purposes being considered. The other approach is to use the soft systems methodology in which the analysis encompasses the concept of a human activity system as a means of improving a situation. The use of soft systems methodology is considered more appropriate for dealing with the problem of design which is characterised by a flux of interacting events and ideas that unroll through time. The paper concludes that the main impediment to maximising the benefits of CAD systems in architectural education is not only the inappropriate definition of the objectives for the implementation of CAD education but also that the control subsystems are usually ill-structured and relatively poorly defined. Schools must attempt to define a coherent and consistent policy on the use of CAD systems as an integral part of studio design and evolve an in-house strategic and operational controls that enable the set objectives to be met. Furthermore, it is necessary to support the high level of productivity from CAD systems with a more efficient management system, especially in dealing with communication, data sharing via relational database, co-ordination and integration. Finally, the use of soft systems methodology is recommended as the way forward to optimising CAD systems in design education as it would provide continuous improvements while maintaining their productive value.
series	eCAADe
last changed	2022/06/07 07:50

_id	0e89
authors	Bradford, J.W., Cheng, N. and Kvan, Thomas
year	1994
title	Virtual Design Studios
doi	https://doi.org/10.52842/conf.ecaade.1994.163
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 163-167
summary	Beginning in 1993, small groups of students of architectural design at different institutions around the world participated in collaborative design projects using a variety of tools, including CAD, Internet and teleconferencing. This programme, known as the "Virtual Design Studio" (VDS), allows students to work collectively with colleagues from different cultures and climates who are thousands of kilometres and in different time zones. Most recently, in February 1994, four institutions in N. America, one in Europe, and one in S E Asia participated in VDS’94. This paper explains the operation of the VDS and explores the future of the VDS as a potential tool for architectural design education. In particular, we review what we have learned in employing computer tools to extend the teaching in design studios into a "virtual" experience.
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:54

_id	28dd
authors	Bridges, Alan
year	1994
title	Architectural Computing Education
doi	https://doi.org/10.52842/conf.ecaade.1994.x.v5x
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 226
summary	Many papers at previous eCAADe conferences have discussed CAD curricula, but few have questioned the educational objectives of teaching CAD. I wish to use this short paper to discuss not only what should be taught but why and how it should be taught. Topics covered include: styles of teaching and learning; individual or group working; and principles versus practicalities.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddss9422
id	ddss9422
authors	Daru, Roel and Snijder, Philip
year	1994
title	Sketch-Trigger: A Specification for a Form Generator and Design Analysis Toolbox for Architectural Sketching
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In order to develop design and decision support techniques in the early sketch design phases, weshould (1) experience and (2) observe real behaviour in practice, (3) transform observations intoideas for improvement, (4) develop behaviour models to explain the sketch design activities and(5) to evaluate between the proposals, (6) decide between the alternatives, (7) implement theselected option in a supporting tool. Our paper reports about the results of step 3 in particular inthe first phase of a Ph D project, started this year. Our main objective is to amplify the effects ofthe sketch as a very effective instrument to generate original forms and to stimulate the mind to discover new shapes and meanings in the roughly sketched patterns. Instead of considering the sketch only as a representation of what the designer has in mind as is usually assumed in CAD systems, we see sketching as form activation. Thus, we want also to offer triggering images to spark off the imagination of the designer while generating images which are practically impossibleto create by hand and certainly not at short notice. The main improvement proposed is the use of an evolutionary form breeding system: one or more sketched parent images (either ready-made'partis' or basic schemes drafted by the designer) presented in the centre of the screen, will generate surrounding mutated children as defined at random but constrained by default or customization of the available transformations. By selecting one or more children a next generation will be produced in the same way. At all times the designer can introduce or reduce constraints. To complete the usually offered 'classical' symmetrical, spatial and logical operations,we want to introduce dis-functional operations like dislocation, explosion, deformation, anti-logic etc, in short all kinds of antagonistic operations, among them the transformations applied indeconstructionist and post-modern design. Our expectation is that these operations will correspond roughly to the 'move' pertaining to a design entity as the operational unit most appropriate for design behaviour research, in particular the analysis of the chunking and parsing behaviour of the designer. The applicability of the 'move' approach has been shown experimentally by Habraken and others. Goldschmidt has abandoned the usual typology approach of protocolanalysis based on moves and concentrated on the linking of moves, but has been hampered by the lack of a good representational instrument. This brings us to the representation of moves and linkages as a research instrument. The 'linkograph' approach as proposed by Goldschmidt is a first step towards a graphical representation of the designers associative reasoning mode, necessary for tracking the heuristics of designers at the most basic level, but its practical implementation remained as yet incredibly laborious. What is proposed here is an instrument and approach which makes such registration and analysis possible within a structured software environment.
series	DDSS
email
last changed	2003/08/07 16:36

_id	627a
authors	Eddison, Tony
year	1994
title	An Investigation of the Concept of Designer Style and its Relevance to The Design of CAD Systems
doi	https://doi.org/10.52842/conf.ecaade.1994.x.t0t
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 213
summary	Underlying the notion of style is the basic premise that all designers are not the same and that the manner in which any designer works through a design problem towards a proposed solution may be qualitatively different from other designers. If, through this work, this is shown to be the case and the concept of designer style can be meaningfully discussed then any model of the design process and any system or product relating to this model must allow for such variations at the level of the group or individual. This is the starting point of this investigation of the concept of designer styles.
series	eCAADe
last changed	2022/06/07 07:50

_id	c967
authors	Fantacone, Enrico
year	1994
title	Exporting CAD Teaching into Developing Countries
doi	https://doi.org/10.52842/conf.ecaade.1994.x.t3s
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 222
summary	In 1986 the Faculty of Architecture was established in Maputo. It is financed by the Italian Ministry of Foreign Affairs and managed by a Scientific Council of the Faculty of Architecture of "Università La Sapienza" of Rome. The need to create human technical resources beeing able to work profesionally as soon as they finish their studies, made the teaching basis for lab exercises and design. The new architects (the first six students graduated in 1991), need to design and make very important decisions without any control by more experienced local technical institutions. The creation of a CAAD laboratory, and the teaching of information technologies and metodologies in architectural designing aimes to achieve a double goal: (-) to make the new architects able to manage on their own, because of the lack of qualified human resources, large quantity of data, and difficult design problems; (-) to make University, the most important scientific center in the country, an information exchange center between developped countries, and Moçambique.
series	eCAADe
last changed	2022/06/07 07:50

_id	a6fe
authors	Gatermann, Harald
year	1994
title	Using Hypermedia as a Teaching Tool in CAD Education
doi	https://doi.org/10.52842/conf.ecaade.1994.x.v6m
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 211
summary	CAD-programs belong to the most complex kinds of software - complex and difficult in using and especially in learning for architects and for students. Some years ago we already tried to find ways for making the first steps easier for students and more comfortable for teachers: Our first attempt was to reduce the number of commands from 150 to only 20 in the first lesson by cutting off many of the pull-down-menus (it was even the time before the cad-program, we use, was running under windows). We supported the reduced menus on the screen by handing out a template with all the needed commands for the first lesson. We had two positive results: the first was a reduction of beginners frustrations about too many new things, the second was a homogenisation among the students´ know how: the very eager ones were no longer able to test too many new things! In the second lesson the students got another twenty new commands and so on (they could start the program with a batch rib-1, rib-2 etc.). Our second attempt was the development of new dialogues due to our experience in teaching and in looking at the same points of difficulties every year.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9444
id	ddss9444
authors	Hill, Shauna and Streilein, André
year	1994
title	Architectural Photogrammetry & Knowledge-Base Systems Record & Redevelopment
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In redevelopment projects, the purpose of heritage recording is part of an investigative process to achieve understanding about structures so that designers can make the appropriate design decisions. It is desirable to integrate the knowledge of the recording and documentation specialist, who has first-hand knowledge of the building, with the interpretative process of evaluating the building information and making design decisions. New developments in the fields of photogram-metric recording and computer science has led to improved "image understanding". This paper describes research that is the result of exploring the concept of integrating new digital photogram-metric recording processes with an automated expert evaluation tool. The goal of this research is to expedite the acquisition of heritage building information for use by a knowledge-based system capable of providing the designer with building performance evaluations. Photogrammetry records all data as a series of three-dimensional coordinates which make it a natural partner for today's three-dimensional CAD systems. Generating a three-dimensional model of architecturally significant physical forms and details can provide a basis for evaluation, understanding, education, and design. The purpose of knowledge-based systems in construction is to enhance the decision-making process with specialized knowledge and experience. The linkage of CAD databases with knowledge-based systems provides a source of input data, such as a three-dimensional model, significant to a particular problem. This research is a collaborative effort between two groups, the Swiss Federal Institute of Technology in Zurich Switzerland, and the University of Manitoba in Winnipeg, Canada.
series	DDSS
last changed	2003/08/07 16:36

_id	8771
authors	Howes, J.
year	1994
title	CAD Education & Practice in the UK
doi	https://doi.org/10.52842/conf.ecaade.1994.x.h3x
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 261
summary	In 1989, the CICA, in collaboration with Peat Marwick Mclintock, surveyed the use of CAD in the top 100 companies in four major sectors of the construction industry.
series	eCAADe
last changed	2022/06/07 07:50

_id	091d
authors	Ismail, Ashraf Lotfy R.M.
year	1994
title	Strategic CAAD Modelling: The Misconception
doi	https://doi.org/10.52842/conf.ecaade.1994.x.r6n
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 255
summary	The emphasise is on the common misconception in CAAD modelling. It is a theoretical and practical problem that undermines the process of design and progress, which often influences or decides the form of 2D-CAD drawings and 3D-CAD Modelling.
series	eCAADe
last changed	2022/06/07 07:50

_id	26a5
authors	Kokosalakis, Jen
year	1994
title	Recent Developments Using ArchiCAD in Education: LJMU experience
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u2t
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 224
summary	The teaching forum : Based on the CAD Suite for Division of Arts & Professional Studies Emphasis here is on teaching of formal class groups, demos from the Mac with OHP interface display panel usually with DTP hand outs, programmed in with project themes. eg. Attributes of materials - rendering transparency, reflection & shadow casting features timed for the Clay and Glass Design project. CONS - More able students tend to be held up by the slower ones. Some students rush ahead using the hand outs and get out of sync with the rest.
series	eCAADe
last changed	2022/06/07 07:50

_id	a743
authors	Laing, L. and Kraria, H.
year	1994
title	CAD as an Interface for Integrated Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w5h
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 235
summary	In the traditional approach to building design, the designer (usually the architect) produces a design (often quite detailed)in blueprint before handing this to the next member of the design team (engineer) to superimpose the structure, services etc. Often this proves so impractical that the initial proposal has to be referred back to the architect for revision, and the process repeated - and this cycle may be repeated many times. Such routines arise in building design because designers find collaboration among themselves difficult to control, the task of design integration ultimately falling upon the construction manager or the contractor. This is the most common cause of problems arising during the execution of the project on site, causing a delays in the construction process, and building failures which might only be detected after occupancy. As a test-bed for addressing this problem, a system of coordinated files is proposed for use by design-students (with a working knowledge of AutoCAD) during a design project. The aim is to related data (CAD information) across all students working on the same project but developing different aspects. Participating students will be drawn from a range of design specialisms. Each member accessing the same information while developing different aspects (e.g. structure, services, and cost modelling). This goes beyond the conventional use of 'XREF' (cross-referenced drawings) and involves each member accessing and working with the same dataset - e.g. using different layers, co-ordination is easier and the data better integrated - there is thereby a reduction of the amount of repetition as the need to redraw information is eliminated. References or an initial data-set is set up by the tutor and available for reference at any stage of design project. The technological aspects to support collaborative work (and in particular the interaction process in design) is the main thrust of the undergraduate degree in Building Design Engineering at the University of Strathclyde.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ddss9459
id	ddss9459
authors	Langelaan, Willem
year	1994
title	Sequential and Concurrent Cad Layering
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Most CAD software allows graphical and text objects to be grouped into layers. There are two fundamentally different methods for layering: sequential layering and concurrent layering. With sequential layering, layers are attributes of the CAD database and objects are attributes of a layer. With concurrent layering, objects are attributes of the CAD database and a layer is an attribute of an object. Sequential layering emulates the pinbar drafting technique. As a result, it is output oriented. Only one layer at a time can be edited. Concurrent layering is uniquely a computer based layering method which has no manual equivalent. User specified sets of layers can be edited concurrently. It makes it possible to organize the infrastructure of the CAD database which equally facilitates input, i.e. editing design information, and output, i.e. presenting construction information on paper. Specification levels are related to design levels and to construction phases. Specification levels can serve as interfaces between input and output. In particular, a concurrently layered CAD database can be structured in layers which conform to specification levels. Furthermore, the layers can be subdivided by sub-system such as construction discipline, and by partial-system such as room finish schedules. It is demonstrated how a concurrently layered environment for computer aided design can be developed which permits deductive and inductive design activities. The appendix provides a detailed example of a concurrently layered CAD file with a default input and output environment of layers and layer groups. The environment was developed to coordinate the design and production activities of an architectural practice. The connections between layers and layer groups are illustrated in a 22 x 32 matrix.
series	DDSS
last changed	2003/08/07 16:36

_id	a9f0
authors	Lentz, Uffe
year	1994
title	New Tools: New Architecture
doi	https://doi.org/10.52842/conf.ecaade.1994.x.f7f
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 217
summary	Our young students have no strong bindings to the tools and methods of our profession. With their open-minded access to the media, they often try to do things, which are surprising and new. Things which would have been impossible to think of without a computer. They are inspired of apparently unknown design-options, which they find in CAD-tools, or they are exploring possibilities in 'strange' combinations of media, not unknown from Television-commercials and music-videos. This Blitz-session will show some students' projects in a very short while. The common thing is, that the students have broken rules, that the teacher never realised were rules, because of his (my) traditional education. One student uses a solid modelling -tool for inspiration, - another uses an auto-tracing tool to generate the concept - and a group of students used a combination of video, grabbing and 3D-modelling to generate new architecture.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	2e74
authors	Liebich, Thomas
year	1994
title	Behind the Lines - Managing Semantically Rich Data in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u5d
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 253
summary	Current CAD systems have inherent bottlenecks, which diminish possible achievements for architectural practices. Among these shortcomings there are two the paper will deal with. Firstly, traditional CAD relies on a pure geometric model. All non-geometric information about objects of architectural interest has to be attached to these geometric entities. This restricts the ability to describe semantically dependent relationships. Secondly, the integration of different design tools for building and construction is still at its very beginning. The data exchange remains restricted, since it is based on a fairly low semantic level of a document-based exchange of information, such as geometric representation in DXF or IGES, rather than on a high semantic level of a model-based exchange.
series	eCAADe
last changed	2022/06/07 07:50

_id	edf2
authors	Mori, Stefano and Ng, Edward
year	1994
title	Active Studio v.1.5
doi	https://doi.org/10.52842/conf.ecaade.1994.x.v4a
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 234
summary	Four case studies from Active Studio are presented. They are three student projects and a prize winning national competition entry. Being driven by the uniqueness of individual contexts each highlighted a different issue concerning the use of CAD as an image making tool.
series	eCAADe
last changed	2022/06/07 07:50

_id	a34c
authors	Sadowski, Michal
year	1994
title	Protection and Conservation of Monuments Supported by GIS
doi	https://doi.org/10.52842/conf.ecaade.1994.x.g2m
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 240
summary	The issue of monument protection and conservation not incidentally has become a part of the scope of interests of the Center for Computer Aided Architectural Design. As a research-educational division of the School of Architecture, Warsaw University of Technology, we are a partner providing advisory and implementation services. Employment of a large computer system such as Intergraph's MGE will constitute a considerable improvement for Conservation Offices in the introduction, storage, updating and accessibility of historical maps, photographs, information about information, geological and topological, network, roads, sites, CAD drawings and 3D models. Another important effect will be that of setting a direction for activities of other offices interested in increasing their work efficiency through computerization.
series	eCAADe
last changed	2022/06/07 07:50

For more results click below: