Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 362

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9406
id	ddss9406
authors	Bakel, Anton P.M. van
year	1994
title	Assesing Strategy Questionnaire for Architectural Styles of Designing (ASQ-FASD)
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In this paper the first results will be discussed that were obtained by the Assessing Strategy Questionnaire For Architectural Styles of Designing (ASQ-FASD). This questionnaire was developed specifically for the assessment of architectural design strategies. The construction of the questionnaire will be discussed in light of previous protocol research on strategic styles of designing. With this questionnaire, we developed a tool to assess an architects design strategy in a faster, easier and more reliable way than used to be the case with conventional protocol studies and other knowledge eliciting techniques like Card Sorting, and Repertory Grid. This questionnairewas submitted in a pilot study to 10 experienced Dutch architects. R.esults show that architects do indeed have preferences for different design situations. Moreover results indicate that they havea preference with respect to their responses within such specific situations. Though the generalizability coefficient was calculated for no more than 10 architects with a value of .57 (generalizing across situations), we feel that this is reason enough to assume that the questionnaire can be used to assess design strategies of architects. These results will be discussed with respect to the development of new design and decision support tools. The fact that designers have preferences for specific design problems and that they respond differently should be considered in the implementation of user interfaces and data base technology where possible.
series	DDSS
email
last changed	2003/08/07 16:36

_id	673a
authors	Fukuda, T., Nagahama, R. and Sasada, T.
year	1997
title	Networked Interactive 3-D design System for Collaboration
doi	https://doi.org/10.52842/conf.caadria.1997.429
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 429-437
summary	The concept of ODE (Open Design Environment) and corresponding system were presented in 1991. Then the new concept of NODE. which is networked version of ODE. was generated to make wide area collaboration in 1994. The aim of our research is to facilitate the collaboration among the various people involved in the design process of an urban or architectural project. This includes various designers and engineers, the client and the citizens who may be affected by such a project. With the new technologies of hyper medium, network, and component architecture, we have developed NODE system and applied in practical use of the collaboration among the various people. This study emphasizes the interactive 3-D design tool of NODE which is able to make realistic and realtime presentation with interactive interface. In recent years, ProjectFolder of NODE system, which is a case including documents, plans, and tools to proceed project., is created in the World Wide Web (WWW) and makes hyper links between a 3-D object and a text, an image. and other digital data.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ddss9435
id	ddss9435
authors	Grimshaw, Robert
year	1994
title	Simulation Models and Facility Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The paper is based on a now completed research project funded by SERC and carried out by the author and former colleagues from the University of Salford in a multi-disciplinary team comprising building maintenance experts and operational researchers. The project sought to develop a model to simulate manpower deployment in a building maintenance organisation using a single case study. Although the results of the project were limited in scope, being more concernedwith the development of the methodology to deal with such problems, the work did have useful outcomes including the development of a database which contained detailed information on the hourly deployment of labour on maintenance and facilities work over a 12 month period. The proposed paper will consider the implications of the output from both the database and the simulation model for the planning of facilities and the deployment of labour in developing and maintaining those facilities.
series	DDSS
last changed	2003/08/07 16:36

_id	d7f4
authors	Gross, M.D.
year	1994
title	Roles for Computing in Schools of Architecture and Planning
source	Journal of Architectural Education, Sep. 94, pp. 56-64
summary	A successful effort to incorporate computing in a school of architecture and planning must satisfy varying student objectives and encompass a range of computing roles. This article reviews these roles and presents a case study of computing at the College of Architecture and Planning (formerly Environmental Design) at the University of Colorado at Boulder. Three categories of instruction make up the curriculum: Tool-using courses teach specific applications, tool-building courses focus on developing new design software, and design theory and methods courses provide rationale for specific computational approaches. Finally, strategies employed in developing this curriculum are discussed.
series	journal paper
email
last changed	2003/04/23 15:14

_id	ddss9446
id	ddss9446
authors	Horgen, Turid
year	1994
title	Post Occupancy Evaluation as a Strategy to Develop an Improved Work Environment
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	A post-occupancy evaluation is a formal way of finding out whether a recently occupied, remodelled, or built environment is performing, as was intended in its programming or design, and a term which has been developed in the professional field in the United States over the last 20 years. The Scandinavian approach to the same question has emphasised surfacing the values of the users of the work environment as a tool for a more comprehensive approach to space planning and design. A recent case-study of the Taubman Building at Harvard University's John F. Kennedy School of Government was aimed at blending the two strategies for evaluation, defined postoccupancy evaluation as a dialogue with the client, as a process to help the client reflect on spatial and technological improvements, or alternate strategies for organisational locations in buildings, and offers an interesting example of a possible future direction for POE's. Sheila Sheridan, Director of Facilities and Services at the Kennedy School, commissioned the case-study, and has been using it result in her daily work. Jacqueline Vischer, who has developed a survey of seven key dimensions of work-place comfort for commercial office buildings throughout eastern North America, and Turid Horgen, who has developed tools for participatory environmental evaluation and programming, widely used in Scandinavia, carried out the study and facilitated the evaluation process. The study is also done in the context of the ongoing research on these issues in the design Inquiry Group at the School of Architecture and Planning at MIT, which is involved in a larger program for developing strategies and tools for more effective programming and management of corporate space. This research defines the workplace environment as the interaction between four dimensions: space, technology, organisation and finance. Our approach is to integrate programming and evaluation with organisational planning and organisational transformation.Post occupancy evaluation is seen as a way to inform the client about his organisational culture as he manages the fit between a facility and its uses, and as one of several tools to bridge the frameworks and viewpoints and the many "languages" which are brought into the decision making process of designing the built environment.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9471
id	ddss9471
authors	Oxman, Robert
year	1994
title	The Reflective Eye: Visual Reasoning in the Sketch
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Despite recent advances in our understanding of design thinking, we still lack a comprehensive theoretical approach to cognitive processes in design and particularly to visual reasoning. Of scientific interest in its own right, understanding non-verbal reasoning is also relevant to a wide range of subjects in the area of visual data resources for designers. This paper presents research into visual reasoning through the study of cognitive acts and processes associated with design drawing. Employing case studies in the design sketch, a vocabulary is defined for describing phenomena of visual reasoning in design as they are revealed in the sketch. Classes of reasoning processes are proposed as strings of graphic acts of state transformation. A theoretical schema is developed which relates the individual act of visual reasoning manifested in the sketch, of sketch sequences, with larger global cognitive phenomena such as analogical or associative reasoning in design. Based upon this schema, a symbol system for these acts and processes is proposed as a coding technique in the observation, analysis and recording of non-verbal processes in design.
series	DDSS
email
last changed	2003/08/07 16:36

_id	9779
authors	Smeltzer, G.T.A., Mantelers, J.M.M. and Roelen, W.A.H.
year	1994
title	The Application of Virtual Reality Systems in Architectural Design Processes
source	BIT Note Publication 95/1, Building Information Technology, Eindhoven
summary	This publication describes the development and the application of a Virtual Reality system for the architectural design process. It is based on the results of research into Virtual Reality technology and in particular into the possibilities of a natural interface between a designer and a design system. This description is also based on the development of a laboratory set up for a "full immersive" and a "partially immersive" Virtual Reality application. This application offers a designer the possibility of modifying and assessing a 3D design model in "Virtual Reality" and is used in the course of several case studies. One of these case studies was the making of a presentation of a house design to possibly interested parties. The other case study was the use of Virtual Reality in the course of a design process. Finally this publication includes the description of some future and anticipated developments. The research problem is mainly posed by the questions regarding the ways in which the design process changes under the influence of amongst other factors the Virtual Reality technology. Other questions concern the ways in which the interface between a designer and a design system can be made as natural as possible, the way in which a design model can behave as autonomous as possible, and the way in which a representation can be made as realistic as possible. With regard to these the starting points were respectively the use of sensors, the definition of behaviour characteristics and the use of illumination simulations.
series	other
last changed	2003/04/23 15:50

_id	ddss9486
id	ddss9486
authors	Smeltzer, Geert
year	1994
title	The Application of Virtual Reality Systems in Architectural Design Processes
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper describes the application of virtual reality systems in architectural design processes. It is based upon research on virtual reality technology to develop a more natural interface between men and design systems. It is also based upon the development of an integrated laboratory set-up for an immersive and a desk-top virtual reality system. This set-up should offer possibilities to manipulate 3D design models and to simulate the lighting situation in real time. Finally it is based upon an application of virtual reality technology for a design presentation. The research problem was determined by the question in which way the design process changes under the influence of technology. Other research questions, autonomous as possible, were how natural an interface can be using sensors, how a design model can be using real world features and how a representation can be as realistic as possible, using lighting simulations. The development problem was determined by the fact that the laboratory set-up had to be developed in co-operation with a hardware and a software vendor. This led to the development of two set-ups: one immersive virtual reality system and one desk top system. Another problem for the development of the set-up was that the project had to result in the presentation and demonstration of virtual reality technol-ogy that was not yet generally available to a larger group of organisations or enterprises. The first case study involved the development of a virtual reality presentation of a housing project in the Netherlands. The presentation was meant for people who were interested in the houses and was announced as a virtual open house. A potential buyer could walk through the model and move furniture around. The problem addressed concerned the relationship between the level of detail of the model, the speed of representation and the ease of interface system's. The second case study concerned the use of a virtual reality interface, model and representation for the evaluation of visibility and safety aspects of another housing project. At first this application was meant for the designers and their client. Based upon their evaluation of the design, several design improvements were made. Afterwards, this application was used for internal demonstrations. The application for the evaluation and the demonstrations were developed for an immersive virtual reality system and for a desk top system. The problem addressed was first of all a design problem and secondly a technical problem. This technical problem was related to the difference between the two virtual reality systems in terms of consequences for those applications. In the near future the research project, called the Asterisk project, will also examine and develop the possibilities of the simultaneous use of the system by more than one user, possibly on different locations. This means a development from single user single site to a multi user, a multiple site virtual reality systems. This project will also evaluate the feasibility of the application of virtual reality technology during an architectural design process. This research project will be followed by the development of a prototype of a virtual architecture system demonstrations of this system and an introduction to the market.
series	DDSS
email
last changed	2003/08/07 16:36

_id	89a8
authors	Smeltzer, Geert T.A.
year	1994
title	Virtual Reality in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1994.x.e4i
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 244
summary	This short presentation will describe the application of a Virtual Reality system for the architectural design process. This is based on the results of research into 6 technology and in particular on the possibilities of a natural interface between a designer and a design system. This description is also based on the development of a laboratory setup for a “fully immersive” (all-round representation) and a “partially immersive” (stereo representation) 6 application. This application offers a designer the possibility of modify-ing and assessing a 3D design model in “Virtual Reality” This presentation is mainly based on the use of Virtual Reality in the course of several case studies. One of these case studies was the making of a presenta-tion of a design to possibly interested parties. The other case study was the use of Virtual Reality in the course of a design process. Finally this publication includes the description of some future and anticipated developments. The research problem is mainly posed by the questions regarding the ways in which the design process changes under the influence of, amongst other factors, the 6 technology. Other questions concern the ways in which the interface between a designer and a design system can be made as natural as possible, the way in which a design model can be made as autonomous as possible, and the way in which a representation can be made as realistic as possible. With regard to these the starting points were respectively the use of sensors, behaviour characteristics and illumination simulations. The development problem is posed by the question regarding the way in which a laboratory setup, in cooperation with a supplier of hardware (Sun Microsystems Nederland BV) and a supplier of software (Autodesk Benelux BV), can be developed. In order to do this use has to be made of their system components, such as workstations and CAD software. Another problem for the development of the laboratory setup is the way in which the project was to be made to lead to presentations and demonstra-tions of 6 technology which was still not yet generally available. The first case study was the development of a 6 presentation of a housing project. This presentation was in the first instance intended for people who had an interest in the project. In addition, naturally, people who really only had an interest in Virtual Reality itself also attended. The presentation was announced as being a first Virtual Open House. Each interested party could wander through the 3D design model and move the furniture. In the course of this case study consideration was above all given to the relationships between the interfaces between the user and the system, the level of detail of the model and the speed of the representation. The second case study was the use of Virtual Reality during a design process. The system is used for the evaluation of visibility and safety aspects of another housing project. The use of the system was initially only intended for the designer and the principal. At the end of the process different design modifications were effected in accordance with their evaluations of the design. After that the system was also used for internal presentations of the applications as well as of the technology. The problem which played a role in the course of these studies was in the first instance a design problem and in the second in-stance a technical problem.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9503
id	ddss9503
authors	Wineman, Jean and Serrato, Margaret
year	1994
title	Visual and Spatial Analysis in Office Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The demands for rapid response to complex problems, flexibility, and other characteristics of today's workplace, such as a highly trained work force, have led many organizations to move from strict hierarchical structures to a more flexible project team organization. The organizational structure is broader and flatter, with greater independence given to organizational units, in this case the project teams. To understand the relationship between project team communication patterns and the design and layout of team space, a study was conducted of an architectural office before and after a move to new space. The study involved three project teams. Information was collected on individual communication patterns; perceptions of the ease of communication; and the effectiveness of the design and layout of physical space to support these communications. In order to provide guidance for critical decision-making in design, these communication data were correlated with a series of measures for the specification of team space enclosure and layout. These group/team space measures were adaptations of existing measures of individual work space, and included an enclosure measure, based on an enclosure measure developed by Stokols (1990); a measure of visual field, based on the "isovist" fields of Benedikt (1979); and an "integration" measure, based on the work of Hillier and Hanson (1984). Results indicate both linear and non-linear relationships between interaction patterns and physical space measures. This work is the initial stage of a research program to define a set of specific physical measures to guide the design of supportive work space for project teams and work groups within various types of organizations.
series	DDSS
email
last changed	2003/08/07 16:36

_id	dda4
authors	Yezioro, Abraham
year	1994
title	Form and Performance in Intelligent CAAD Systems for Early Stages in Solar Design Building
source	Technion, Faculty of Architecture and Town Planing, Haifa
summary	Great care should be taken at the initial design stages to determine the principles and solution schemes for climate and energy-conscious buildings. The present study deals with supporting the designer's efforts at the early stages to lay down the appropriate principles for a conceptual and geometric design of energy-preserving buildings, which are also thermally comfortable and adapted to local climatic conditions. For years, especially during the last decade, important data concerning climate-conscious construction has been compiled, but the information has not been utilized by designers, due to its inaccessibility. It is significant, though, that solutions based on this knowledge could be found and assessed at the preliminary design steps. A correct climate-conscious design conceived at the initial stages may guarantee that during later phases of the project's development no problems calling for essential and drastic changes in the basic design will crop up. The meaning of such changes at later stages may require sometimes a redesigning of the entire project. It is vital, therefore, to understand at the pre-conceptual phase, what are the correct climatic-solar design strategies which satisfy the requirements of the local conditions, and enable the attainment of thermal comfort conditions, while consuming the least possible energy. The present study proposes a computer-aided passive solar design system (PASYS) which enables the handling of entire designing process, and its general, conceptual aspects, as well as the preliminary designing steps and their particular, practical aspects. The system is based both on a knowledge base which stores the existing information concerning solar-climatic construction in the form of rules of thumb, and on precise procedural models which enable finding solutions suited to the local climatic conditions. The proposed system is an intelligent CAAD system which equips the designer who is aware of the constraints of climate and energy, with a tool to achieve a better design. PASYS was developed as a universal system to deal with the various activities involved in the initial – pre-conceptual and conceptual - design stages. The system supports the following design activities of each stage of this kind: analysis, synthesis, documentation, assessment and decision making. It is capable of analyzing given conditions, thus helping the designer understand which are the significant preliminary design stages that have a bearing on thermal comfort conditions in a given climate. The system is also capable of proposing solutions corresponding with the particular design phase, and assess their adequacy. These solutions take into account the constraints determined both by the designer and by the system itself, owing to the knowledge base it contains. The system can also document the various solutions that have been found and selected, so that may be further developed at later stages. This documentation is carried out by a graphic interface, developed as part of the system, as well as by an interface devised for existing CAD software. This study highlights the interaction between form and performance. The system is able to assess the performance of a proposed design by considering a given geometry (form), or viceversa, it is able to recommend a solution that can deliver desired and required performances. The study comprises three parts: (a.) Development of the conceptual model of a knowledge based design process. (b.) Further development of the initial stages of the afore mentioned process, including the pre-conceptual and conceptual stages. (c.) Demonstration of the mode of work with the PASYS system. // The first part of the study deals with the definition of the design process, the definition of the various design steps and their characteristics, and the definition of the activities involved in each design step. This part of the work also presents the kinds of knowledge bases affecting the design process, and shows how this knowledge is an inseparable part of the design process. The second part deals with the development of the initial design stages - the pre-conceptual and the conceptual - which are based on knowledge. This part also contains compiled knowledge that is relevant to the design stage, and a knowledge storage and retrieval method that was developed so as to make the knowledge available and accessible on demand. This part further presents precise procedural methods, developed to find solutions adapted to the specific given conditions, and to precisely assess the performance of the proposed solution. A case in point is the module of the SHADING system which enables a precise assessment of the mutual shading of buildings, and an examination of the exposure of the southern elevation to the sun, which is necessary in order to determine the effective solar absorption area in a proposed project in given environment conditions. The third part of the study demonstrates the solar-climatic design process put into action and supported by the system that was developed. This system enables the designer, even at the preliminary design stages, to determine which properties relating to local climatic conditions he will introduce into the building. This important, seemingly natural act, is usually performed during more advanced stages, when it might generate significant changes in the design, at a juncture when changes are hard to make. A PASYS-aided design environment ensures that from the beginning of the designing process, the project will be designed correctly and efficiently as far as energy is concerned.
keywords	Knowledge Base; Design Process; Form; Performance; CAAD Systems
series	thesis:PhD
email
last changed	2003/03/03 11:58

_id	ee50
authors	Campioli, Andrea and Talamo, Cinzia
year	1994
title	IPERTEC: Hypertext Information System for Dry-assembled Building Elements
doi	https://doi.org/10.52842/conf.ecaade.1994.x.b3p
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 239
summary	The experience presented concerns the study of advanced information tools for design disciplines teaching. The objectives pursued are: on one hand self-teaching according to methods that go beyond traditional technical manuals and specialized texts and that give a systemic view of the strict connections between technological culture and design poetics; on the other hand assistance during design exercises as far as references assumption and deep analysis of technical and architectural topics are concerned. The result of the research is the information system Ipertec, a hypertext handbook with didactic purposes allowing students to approach executive techniques of dry assembly.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9484
id	ddss9484
authors	Sklar, Hinda
year	1994
title	Opening Doors at Harvard's Graduate School of Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Design communication has many forms and employs a wide array of references. Design pedagogy uses a rich body of sources and is informed by deep communication between faculty and student. Advancing technology for distribution and manipulation of digital design media and a pervasive computer network at the Harvard Graduate School of Design provide an ideal environment for investigating new methods of access to design resources. A research initiative called the DOORS project (Design-Oriented On-line Resource System) will make a variety of design reference materials available over the GSD's computer network Potentially, DOORS will provide access to: - the Frances Loeb Library's visual and special collections; - slides, drawings, photographs, videos; - private faculty slide collections; - maps and geographic information systems of text, numeric and other visual databases of three- dimensional computer models; - computer-generated animations and digital video segments with sound of multimedia projects. As early pilot versions of DOORS are released, faculty and students will gather visual information for study and modification, analyze images and models, compare and link design documentation in different formats, develop lectures and make presentations from computers in offices, classrooms, and studio work areas. Emphasis will be placed on flexibility, as this particular tool's success will hinge on its ability to respond to different approaches to design and instruction. DOORS proposes to offer three modalities, browsing, composition and presentation, to enable searching, organizati-on, and display. Using established library standards for record format, subject access and keyword indexing, browsing will offer flexible and diverse search criteria. Composition will provide tools for linking, annotation and manipulation of assembled materials. Individual presentations will be viewed in classrooms, studios or offices. A pilot project to assemble some of the basic technology and expertise required is currently under way. The objective of the pilot is to deliver a slice of material over the GSD's local area network in order to raise awareness of the tool's potential among faculty and students, to evaluate its effectiveness, and to formulate technical specifications for later project phases.
series	DDSS
email
last changed	2003/08/07 16:36

_id	df9b
authors	Terzidis, Constantinos A.
year	1994
title	Computer-aided extraction of morphological information from architectural drawings
source	University of Michigan
summary	Along with the popularization of Computer-Aided Design (CAD), it has been becoming increasingly necessary and desirable for a computer to recognize engineering drawings and diagrams. Methods exist for inputting and recognizing such engineering drawings and diagrams. This is primarily because they are drawn to conform to specific standards. In contrast, architectural drawings are not prepared in accordance to existing standards. Hence, the problem of reading, recognizing, and extracting morphological information from them automatically remains unsolved. It is this problem that this study focuses on. The research undertaken by this author has three distinct but interrelated objectives. The first objective is to design, implement, and test a computer-based framework which allows its user to extract automatically the geometric and/or architectural structures of a two-dimensional plan. The second objective entails designing, implementing, and testing a computer-based framework which may be employed to compare the geometric and/or architectural structures of individual plans or classes of such plans. The third objective is to integrate the two aforementioned frameworks. Computer vision techniques are used to investigate, analyze, and compare plans of buildings from a morphological standpoint. Such techniques can contribute toward detecting differences or similarities between individual plans. Their ability to search for, combine, and compare morphological information is both parsimonious and effective. Predicated on the assumption that designers derive knowledge from past solutions to form-making problems, this study focuses on the methods by which the morphological information which is contained in building plans can be extracted automatically and entered in a knowledge base. Conceptually, this is part of a larger project which entails investigating how knowledge can be incorporated in a CAD system in a manner which aids and supports the form-making process. Conceivably, the approach of this work is, wholly or partially, applicable to the problem of extracting useful information from graphic representations used in a variety of disciplines (e.g., engineering).
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	cf2011_p127
id	cf2011_p127
authors	Benros, Deborah; Granadeiro Vasco, Duarte Jose, Knight Terry
year	2011
title	Integrated Design and Building System for the Provision of Customized Housing: the Case of Post-Earthquake Haiti
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 247-264.
summary	The paper proposes integrated design and building systems for the provision of sustainable customized housing. It advances previous work by applying a methodology to generate these systems from vernacular precedents. The methodology is based on the use of shape grammars to derive and encode a contemporary system from the precedents. The combined set of rules can be applied to generate housing solutions tailored to specific user and site contexts. The provision of housing to shelter the population affected by the 2010 Haiti earthquake illustrates the application of the methodology. A computer implementation is currently under development in C# using the BIM platform provided by Revit. The world experiences a sharp increase in population and a strong urbanization process. These phenomena call for the development of effective means to solve the resulting housing deficit. The response of the informal sector to the problem, which relies mainly on handcrafted processes, has resulted in an increase of urban slums in many of the big cities, which lack sanitary and spatial conditions. The formal sector has produced monotonous environments based on the idea of mass production that one size fits all, which fails to meet individual and cultural needs. We propose an alternative approach in which mass customization is used to produce planed environments that possess qualities found in historical settlements. Mass customization, a new paradigm emerging due to the technological developments of the last decades, combines the economy of scale of mass production and the aesthetics and functional qualities of customization. Mass customization of housing is defined as the provision of houses that respond to the context in which they are built. The conceptual model for the mass customization of housing used departs from the idea of a housing type, which is the combined result of three systems (Habraken, 1988) -- spatial, building system, and stylistic -- and it includes a design system, a production system, and a computer system (Duarte, 2001). In previous work, this conceptual model was tested by developing a computer system for existing design and building systems (Benr__s and Duarte, 2009). The current work advances it by developing new and original design, building, and computer systems for a particular context. The urgent need to build fast in the aftermath of catastrophes quite often overrides any cultural concerns. As a result, the shelters provided in such circumstances are indistinct and impersonal. However, taking individual and cultural aspects into account might lead to a better identification of the population with their new environment, thereby minimizing the rupture caused in their lives. As the methodology to develop new housing systems is based on the idea of architectural precedents, choosing existing vernacular housing as a precedent permits the incorporation of cultural aspects and facilitates an identification of people with the new housing. In the Haiti case study, we chose as a precedent a housetype called ‚Äúgingerbread houses‚Äù, which includes a wide range of houses from wealthy to very humble ones. Although the proposed design system was inspired by these houses, it was decided to adopt a contemporary take. The methodology to devise the new type was based on two ideas: precedents and transformations in design. In architecture, the use of precedents provides designers with typical solutions for particular problems and it constitutes a departing point for a new design. In our case, the precedent is an existing housetype. It has been shown (Duarte, 2001) that a particular housetype can be encoded by a shape grammar (Stiny, 1980) forming a design system. Studies in shape grammars have shown that the evolution of one style into another can be described as the transformation of one shape grammar into another (Knight, 1994). The used methodology departs takes off from these ideas and it comprises the following steps (Duarte, 2008): (1) Selection of precedents, (2) Derivation of an archetype; (3) Listing of rules; (4) Derivation of designs; (5) Cataloguing of solutions; (6) Derivation of tailored solution.
keywords	Mass customization, Housing, Building system, Sustainable construction, Life cycle energy consumption, Shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	ddss9419
id	ddss9419
authors	Choukry, Maha
year	1994
title	Knowledge Acquisition by Measurement: The Domain of Building Change
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper presents a study that is aimed at finding a basis for systematic knowledge acquisition. More specifically, it attempts to introduce, knowledge acquisition by measurement: a method thatallows objective evaluation of empirical observations. Measurement has proven to be a significant tool to acquire, evaluate, and upgrade knowledge in some knowledge domains. In other domains,such as the domain of building change, measurement is barely subject of study. Building change knowledge acquisition by measurement seems to become a significant subject of study for several reasons: (i) increase our objective knowledge of previous building changes, (ii) allow systematic monitoring of present changes, and (iii) assist decisions planning for change in new buildings. In current studies, questions such as what were required changes, what were the building elements that fulfilled a change, how often did a building change, and what were the costs related to a change, often get no systematic or objective answers. Hence, to overcome that, I am concerned with finding a method that is to answer the following questions: 1) What is the domain of building change; 2) Is a method of knowledge acquisition by measurement adequate to represent buildingchanges; 3) Can empirical observations of building change be systematically represented and objectively evaluated using this method; and 4) How can this method be applied to assist theunderstanding of previous changes, the control of present changes, and assist planning for building change. The method introduced is based on three modules: (i) domain of building change; (ii) modelling this domain; and (iii) measurement. These three modules enable the formulation of the measurement of building change, namely the change indicator. Multiple change indicators, such as cost change indicator, or occurrence change indicator can measure empirical observations ofbuilding change. Sequential steps that lead to the development of this method start by section 1, where the domain of building change is specified. In section 2 this domain is modelled, and in section 3, knowledge acquisition by measurement method is introduced. A case study, shows how empirical building changes can be measured is explained in section 4. In section 5, three possible applications are introduced, and in section 6, I explain how a computerized prototype would enhance the efficiency of using such applications. Findings and conclusions resulting from this study are summarized in section 7.
series	DDSS
email
last changed	2003/08/07 16:36

_id	3e74
authors	Dasgupta, S.
year	1994
title	Creativity in Invention and Design
source	Cambridge University Press
summary	In this book, creativity in technology is discussed using a computational approach. Examining an important historical episode in computer technology as a case study, namely, the invention of microprogramming by Maurice Wilkes in 1951, the author presents a plausible explanation of the process by which Wilkes may have arrived at his invention. Based on this case study, the author has also proposed some very general hypotheses concerning creativity that appear to corroborate the findings of some psychologists and historians and then suggests that creative thinking is not significantly different in nature from everyday thinking and reasoning.
series	other
last changed	2003/04/23 15:14

_id	68c8
authors	Flemming, U., Coyne, R. and Fenves, S. (et al.)
year	1994
title	SEED: A Software Environment to Support the Early Phases in Building Design
source	Proceeding of IKM '94, Weimar, Germany, pp. 5-10
summary	The SEED project intends to develop a software environment that supports the early phases in building design (Flemming et al., 1993). The goal is to provide support, in principle, for the preliminary design of buildings in all aspects that can gain from computer support. This includes using the computer not only for analysis and evaluation, but also more actively for the generation of designs, or more accurately, for the rapid generation of design representations. A major motivation for the development of SEED is to bring the results of two multi-generational research efforts focusing on `generative' design systems closer to practice: 1. LOOS/ABLOOS, a generative system for the synthesis of layouts of rectangles (Flemming et al., 1988; Flemming, 1989; Coyne and Flemming, 1990; Coyne, 1991); 2. GENESIS, a rule-based system that supports the generation of assemblies of 3-dimensional solids (Heisserman, 1991; Heisserman and Woodbury, 1993). The rapid generation of design representations can take advantage of special opportunities when it deals with a recurring building type, that is, a building type dealt with frequently by the users of the system. Design firms - from housing manufacturers to government agencies - accumulate considerable experience with recurring building types. But current CAD systems capture this experience and support its reuse only marginally. SEED intends to provide systematic support for the storing and retrieval of past solutions and their adaptation to similar problem situations. This motivation aligns aspects of SEED closely with current work in Artificial Intelligence that focuses on case-based design (see, for example, Kolodner, 1991; Domeshek and Kolodner, 1992; Hua et al., 1992).
series	other
email
last changed	2003/04/23 15:14

_id	2292
authors	Kühn, Christian and Herzog, Marcus
year	1994
title	On the Role of Hypermedia in Architectural Design Education
doi	https://doi.org/10.52842/conf.ecaade.1994.115
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 115-120
summary	Teaching architectural design is not primarily concerned with presenting a body of knowledge analytically, but rather with influencing the way students act in a design situation. Previous design cases play an important part in this process, as they provide students with sets of objectives and corresponding solution patterns. Nevertheless, one of the main problems with using precedents in the design studio is that students take them rather as models to be copied than as starting points for their own research. To overcome this problem, the representation of design cases has to be improved. Our thesis is that in architectural design the structure of a case base of design precedents relies to a large extent on the various, and often conflicting, interpretations of precedents that are provided by architectural theory and discourse. Within a theory of design where exploration is the dominant strategy, we propose a method of using design cases and design theories in an integrated way. Through the use of hypermedia as a medium for representation of design cases, the process of looking for information can be based on the same metaphor as the design process itself.
series	eCAADe
last changed	2022/06/07 07:52

_id	db56
authors	Robbins, E.
year	1994
title	Why Architects Draw
source	The MIT Press, Cambridge, Massachusetts
summary	For nearly twenty years Edward Robbins, an anthropologist, has been studying and writing about the system of architectural education and practice in the United States and abroad. In this book he examines the social uses of architectural drawing: how drawing acts to direct both the conception and the production of architecture; how it helps architects set an agenda, define what is important about a design, and communicate with their colleagues and clients; and how it embodies claims about the architect's role, status, and authority. The centerpiece of Robbins's provocative investigation consists of case study narratives based on interviews with nine architects, a developer-architect, and an architectural engineer. The narratives are illustrated by the architects' drawings from projects in Japan, England, Italy, Germany, Spain, Portugal, and the United States, from conception through realization. Included are orthographic and axonometric projections, perspectives, elevations, plans, sections, working drawings, sketches, schematics, construction, and finished drawings. Drawings and interviews with: Edward Cullinan, Spencer de Grey, Jorge Silvetti, Renzo Piano, Alvaro Siza, John Young, Itsuko Hasegawa, William Pedersen, Rafael Moneo, Rod Hackney, Peter Rice.
series	other
last changed	2003/04/23 15:14

For more results click below: