Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 359

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9413
id	ddss9413
authors	Branki, Cherif
year	1994
title	Communicative Acts in Cooperative Architectural Design Environments
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The purpose of this paper is to present a scheme, that can be used to support the communication process in cooperative design. Computational aids for design have largely been for a designerworking by himself/herself. These aids have also been supplemented by the widespread use of artificial intelligence approaches. However, design is so complex, and very rarely acted upon by a single designer but many more working towards the same aim. This involves a new paradigm in which designers need to cooperate with each other using a computational medium. A protocol analysis in cooperative design has been carried out and technological support has been proposed.Cooperative design becomes an important paradigm for the next generation of intelligent computer aided design systems. It will be conducted in many forms among several designers and willrequire the support of advanced communication facilities beyond the "passive" transmission of data and messages. Technological advances in communication networks have opened up new ways for cooperative design interaction across several processes of cooperation among designers, designers and computer aided design systems, computer aided design systems and knowledge based systems, and knowledge based systems themselves. In cooperative design environments, aunit of communication among designers is the transfer of a message from one designer (a sender) to another (a receiver). The aim of such communication is to provide the receiver with some information or to have the receiver take certain actions. Inspired by the speech act theory, a branch of the philosophy of language and linguistics, such a unit is called a communicative act. By analogy to architectural design, a communicative act is a performing act in designers communication.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9420
id	ddss9420
authors	Christie, Colin Ian
year	1994
title	User Interfaces and Systems for Remote Design Working on ISDN Systems
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper will discuss the requirements and possible configurations of user interfaces suitable for remote working multi-disciplinary design practices. Telecom companies throughout Europe are making heavy investments in digital communication technology (ISDN). The networks being created will form a standard method of high speed data transfer which can be readily accessed by any computer hardware platform. There are great opportunities for remote working by design groups, not simply sharing data but also interactive working and video communications. Digital communications provide the electronic arterial system to the new field of remote computing,whilst cheap and effective hardware and software support systems provide readily usable platforms on which to build remote multi-disciplinary design practices where the exploitation of specialistknowledge and skills is not limited by traditional methods of communication. ISDN networks allow real time video, voice and design software interaction - indeed, everything except the designer's physical presence. However as with all computer technology and indeed communications technology the user interface which gives access and control is vitally important. The user interface should provide the following features: be transparent to the user and simple and reliable to operate; allow an interactive window/s into the remote site's design information whatever the type of application being dealt with; carry out data compression, file transfer and file management procedures with minimum input from the user; cause no conflicts with design software or secondary applications;be able to access different platforms.
series	DDSS
last changed	2003/08/07 16:36

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	f586
authors	Gabriel, G. and Maher, M.L.
year	2000
title	Analysis of design communication with and without computer mediation
source	Proceedings of Co-designing 2000, pp. 329-337
summary	With recent developments in CAD and communication technologies, the way we visualise and communicate design representations is changing. A matter of great interest to architects, practitioners and researchers alike, is how computer technology might affect the way they think and work. The concern is not about the notion of 'support' alone, but about ensuring that computers do not disrupt the design process and collaborative activity already going on (Bannon and Schmidt, 1991). Designing new collaborative tools will then have to be guided by a better understanding of how collaborative work is accomplished and by understanding what resources the collaborators use and what hindrances they encounter in their work (Finholt et al., 1990). Designing, as a more abstract notion, is different than having a business meeting using video conferencing. In design it is more important to 'see' what is being discussed rather than 'watch' the other person(s) involved in the discussion. In other words the data being conveyed might be of more importance than the method with which it is communicated (See Kvan, 1994). Similarly, we believe that by using text instead of audio as a medium for verbal communication, verbal representations can then be recorded alongside graphical representations for later retrieval and use. In this paper we present the results of a study on collaborative design in three different environments: face-to-face (FTF), computer-mediated using video conferencing (CMCD-a), and computer-mediated using "talk by typing" (CMCD-b). The underlying aim is to establish a clearer notion of the collaborative needs of architects using computer-mediation. In turn this has the potential in assisting developers when designing new collaborative tools and in assisting designers when selecting an environment for a collaborative session.
series	other
last changed	2003/04/23 15:50

_id	cc19
authors	Glennie, William L.
year	1994
title	Europe '94 - A Visitor's Report on the State of CAAD in Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 262
doi	https://doi.org/10.52842/conf.ecaade.1994.x.s5h
summary	During May, June and July of this year, I had the pleasure of visiting twelve institutions across Europe where computers are being used in the teaching of Architecture. There are as many different approaches to the incorporation of computers in the curriculum as there are places, and they all have some degree of success. My greatest surprise was the large size of these Schools, even in relatively small countries. Dealing with a huge number of students makes any kind of mandatory computer instruction almost impossible. In spite of all difficulties, enthusiasm and willingness to work directly with students was the single most important characteristic in the faculty and staff who are having the greatest success. Support staff dedicated to the maintenance of equipment and software were provided at most of the institutions. For those who do not have this benefit it is critical to relieve the teaching and research faculty of the need for these time-consuming tasks. Formal research activities are not essential to effective education. The process of setting up such efforts is again a distraction from the more important job of teaching. If research projects grow naturally out of the curriculum, they may be pursued without impeding instruction. Most serious of all, there is a substantial lack of communication and cooperation among these schools, and by implication, among all of the other schools in Europe. The mechanism of annual conferences held by ECAADE is insufficient to exchange information and interests. There were several occasions when I mentioned work that was being carried out at one place that would match very nicely with efforts at another. However, it is clearly impossible for any one school to spearhead this kind of collection and coordination of activities. The only appropriate organisation for this kind of exchange would be a centralised service initiated and maintained by the European Community. It is very important that such a body does not attempt to limit or direct the work of individual schools, rather simply serves as a clearinghouse through which the various groups can benefit from each other's work, to the mutual benefit of all.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	412e
authors	Gross, M.D., Do, E. and McCall, R.J.
year	1997
title	Collaboration and Coordination in Architectural Design: approaches to computer mediated team work
source	TeamCAD 97, 17-23
summary	In 1993 and 1994, instructors and students of architecture at several universities around the world* collaborated briefly on two "virtual design studio" projects. Using off-the-shelf technology of the time-email, CU-See-Me internet video, international conference calls, and exchange of CAD drawings, images, and Quicktime animations-this ambitious project explored the possibility of bringing together diverse members of an international design team together to collaborate on a short term (two week) project. Central to the "Virtual Design Studio" was a 'digital pinup board', an area where participating designers could post and view drawings and textual comments; video links and email exchange provided the media for direct communication media about designs. A report on the project [21] makes clear that the process was not without technical difficulties: a significant amount of communication concerned scheduling and coordinating file formats; disappointingly little was devoted to discussions of design issues. Although it's clear that many of the minor technical problems that inevitably plague a forward-looking effort like the Virtual Design Studio will be solved in the near term, the project also reveals the need for research on software and design practices to make computer mediated design collaboration realize its attractive promise.
series	journal paper
email
last changed	2003/04/23 15:50

_id	8822
authors	Jakimowicz, Adam
year	1994
title	Abstract Modelling - Forming and Exploring
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 214
doi	https://doi.org/10.52842/conf.ecaade.1994.x.o5l
summary	Architectural design is always concerned with form to things. It is the sphere or action where meanings are to be expressed and further on - received (by a receiver), felt, understood. "Meanings" mean not only rational information. The matter is to reach the essence and to master ways appropriate to expose and interprete it. Quality of the form decides whether architectural or any work is worth attention or not and to what degree. Form is an attribute of a thing. It is form that "speaks". This linguistic metaphore shows one of natural, inborn features of things and states. However, questions appear: 1. Does everything have form? 2. Is the form an objective term? 3. What limitations of the definition of the form to accept- if any? The friendly environment for creating form consists of conscious intentions plus open mind. Rules are certain, but liquid. Every formal communication system may be widened individually. The only limitation is to be received according to intentions. So, incredibly, the infinite number of combinations, even within one system, may be possible.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	a43d
authors	Kim, Inhan
year	1994
title	Unified Data Organization and Management in an Integrated Design Environment
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 254
doi	https://doi.org/10.52842/conf.ecaade.1994.x.k7n
summary	The architectural design process is very complex and it is not easily confined to a single design environment. As the design process gets more complex due to the technological advances in building materials and construction methods, an integrated design system becomes a central design issue. To have an integrated design system, all applications should be integrated in a unified environment within which there should be a data structure to facilitate an effective data communication among the various design stages and data control facility to seamlessly connect all these applications. A primary purpose of this work is to suggest an object oriented architectural design environment for the essential part of the seamless environment for designing a building. Within the object-oriented design environment, a unified data model and detailed data control module have been implemented to seamlessly connect all these applications. The unified data model organizes the structure of the design data to keep the design consistent throughout the design and construction process. It also helps to do effective data communication among the various design stages to ensure quality and time saving in the final construction of the building. The data management module supports the consistent and easy mechanisms in controlling the data representation through the inter-connected modules. It is also responsible for creating, maintaining, and viewing a consistent database of the design description. In the suggested design environment, each architectural element partially describes the model and individual elements are aggregated hierarchically. Some parts of the projection are defined and other can be inherited from above. Also, creation of an improved or new design element can easily be accommodated in the environment. The integrated database in the suggested environment is the basis by which design data can be shared among the design tools of the design environment. The database organizes the design description within each representation, correlates equivalent descriptions across the representations, and attempts to maintain these correspondences as the design incrementally evolves.
series	eCAADe
last changed	2022/06/07 07:50

_id	e3ac
authors	Kvan, Thomas
year	1994
title	Reflections on Computer Mediated Architectural Design
source	IEEE Transactions on Professional Communication, Vol 37 number 4, December 1994, pp. 226-230
summary	The application of computer tools to mediating and promoting collaborative design efforts between mutually distant parties has become feasible. Technology is again ahead of practice and problems of assimilation have only begun to be explored. This paper postulates some requirements of environments for computer mediated collaborative design in architectural practice; drawing upon experiences of design collaboration between schools of architecture in three continents; supplementing these with enquiries into design excellence in practice
keywords	CSCW; Professional Practice; Architectural Design; Computer-Aided Design
series	other
email
last changed	2002/11/15 18:29

_id	807e
authors	Maver, Thomas W. and Petric, Jelena (Eds.)
year	1994
title	The Virtual Studio [Conference Proceedings]
source	eCAADe Conference Proceedings / ISBN 0-9523687-0-6 / Glasgow (Scotland) 7-10 September 1994, 262 p.
doi	https://doi.org/10.52842/conf.ecaade.1994
summary	ECAADE was established in 1982 with the intention, across Europe, of facilitating the adoption of the Information Technologies - particularly Computer Aided Architectural Design (CAAD) - within the system of architectural education. The Association, in the 12 years of its existence, has grown in its membership (now close to 350) and in its importance. The annual conferences (Delft 82, Brussels 83, Helsinki 84, Rotterdam 85, Rome 86, Zurich 87, Aarhus 89, Budapest 90, Munich 91, Barcelona 92 and Eindhoven 93) now number 12 and this volume records the 70 or so contributions to the Conference held in Glasgow over the period 7-10 September 1994.The proceedings are arranged according to a number of themes. Theories and Ideas, Teaching and Learning, Visualisation, Multi-Media, Virtual Reality, Virtual Design Studios, Functional Analysis, Design Support Systems and Surveys of Activity. The Conference featured 'long presentations'; and 'short presentations'; the length of these presentations is reflected in the two main sections of this text. To preserve the spirit of conference communication and ensure the rapid dissemination of ideas in a fast grown community of polyglot Europeans, no changes to the papers, which were submitted in Apple Mac and/or PC diskettes, have been imposed; you see them as they were submitted and as the authors intended.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	c95f
authors	Petrovic, Ivan and Svetel, Igor
year	1994
title	Conversation on Design Action: By Men or by Machines?
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 15-23
doi	https://doi.org/10.52842/conf.ecaade.1994.015
summary	A design studio of the future shall be based on dislocated, distributed design services, and feature the ‘design by collaboration’ enabled by the computer transmitted information. However, in a collaborative design process, computer may take an additional role, i.e., as an “ultimately structured dynamic communication medium ... based on the notion of commitment and interpretation” (Winograd and Flores 1987). Various models of ‘intelligent’ design systems based on the ideas of ‘open, distributed, artificial intelligence systems’ have shown that the computer-based design agents which act on the object-to-be-designed model could be involved in a “conversation for action” (Winograd and Flores, Ibid.). The aim of the paper is to illustrate a computer-based design system that enables ‘a-kind-of’ conversations by the design agents before the design decisions were made. After the description of a design experiment and the conversation that went on between the design agents, the traits of the applied ‘design design system’ are discussed.
series	eCAADe
last changed	2022/06/07 08:00

_id	ddss9476
id	ddss9476
authors	Porada, Mikhael and Porada, Sabine
year	1994
title	"To See Ideas" or The Visualizing of Programmatic Data Reading Examples in Architecture and Town Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Whether images are still in the mind, metaphors, sketches or icons, they play a crucial role. They have always been the heuristic pivot around which the process of artefact design organizes itself, particularly in architecture and town-planning. "To see ideas" through computer ideograms is to experiment an interesting and new direction for "pictural approach" supported design. Cognitive psychology emphasizes the important part played by mental images in reasoning, imagination in the working of human intelligence and the construction of mental images as cognitive factors underlying reasoning. It also points out how close computerized objects and mental schemata are. "To reason over a situation is first to remember or build some mental models of this situation; second to make those models work or simulate them in order to observe what would happen in different circumstances and then verify whether they fit the experiment data; third to select the best model, a tool meant to sustain and amplify the elaboration of mental models, which is a spontaneous activity". We introduce our exploration of the direct transmission of mental models through computer ideograms. We study the "operative" and the "expressive" aspects, and this allows us to analyze how some aspects in a field of knowledge are represented by ideograms, schemata, icons, etc. Aid to imagination, reasoning and communication by means of a graphic language must be limited to some figurative relevant aspects of the domain considered; it should not aim at a realistic simulation. Therefore, the important role played by icons and the spatial schematic representation of knowledge is emphasized. Our hypothesis is that an architectural concept does not result from an inductive process, but rather is built to solve problems through the direct representation of ideas with ideograms. An experiment was conducted with a graphic language, a dynamic scenography and actor-objects. The language allows one to build and visualize models from the various domains of knowledge of the object. The dynamic scenography can explore and simulate kinetically those models by means of staging various narrations and visual scenarios. The actor-objects play various and complementary parts in order to make the image explicit and link it with the concept. We distinguish between two parallel levels of reality in computer ideographics: one concerns the model, it represents the visualization of a graphic model at a particular moment and according to a particular representation, the other concerns the ideogram.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9477
id	ddss9477
authors	Reuter, Wolf
year	1994
title	Design As Argumentation and Power-Acting - Theory and Methods
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	The process of design is seen as the generation, transformation and communication of knowledge in the brains of the professional designers and other persons and groups, who are interested in or concerned by the design output and who would or should participate in the design process. Only if it is known how these kinds of information and communication processes work, computer support is possible. Design thinking follows a microstructural scheme. A steady change of the understan-ding of the problem also changes the sight of the solution and also changes the need for knowled-ge contributing to the solution. In all stages of the design process alternatives or alternative ways of action are generated. The participants communicate about questions feasibility, the distribution of advantages and disadvantages, expected consequences, and other possibilities. They exchange positions and arguments, upon which finally they base their weighting of aspects and their personal judgement. The process of argumentation and evaluation is considered, it can be formalized and supported by formal methods. The decision about a design alternative by different people is not only based on explicit argumentation and/or formal evaluation procedures, but also on the use of power. Different means of power are stated. Some decision making procedures which control the misuse of power, are discussed.
series	DDSS
last changed	2003/08/07 16:36

_id	4f13
authors	Ronchi, Alfredo M.
year	1994
title	A Brief History of CAAD in Italy
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 227
doi	https://doi.org/10.52842/conf.ecaade.1994.x.f3n
summary	Twenty years of revolution, from the middle '70 to the middle '90. Many things have changed since the origins of computer graphics and computer aided design in architecture. We started teaching drafting on terminals which connected to mini computers, complex procedures or sets of graphics libraries working with keywords, vectors and storage screens. The next step was devoted to the discovery of workstations in the early '80's, where the user sat face on to the whole power of a multitasking system. At that time to use up to 16 time sharing processes running on the same work station seemed to have no practical use at all. Fortunately someone (ie Xerox PARC laboratories) at the same time started to develop the so-called GUI. Graphical user interface started a revolution in human/machine interface (ie Smalltalk). The desktop metaphor, the use of multiple windows and dialogues joined with icons and pop up menus let the user manage more applications and, even more important, created a standard in application/user interface (CUA). In the meantime focus had moved from hardware to software, systems being chosen from the software running. The true revolution we have seen starting from that base and involving an ever increasing number of users was the birth of PC based applications for CAAD. Generally speaking nowadays there are three main technologies concerning teaching: communication, multimedia and virtual reality. The first is the real base for future revolution. In the recent past we have started to learn how to manage information by computers. Now we can start to communicate and share information all over the world in real time. The new age opened by fax, followed by personal communication systems and networks is the entry point for a real revolution. We can work in the virtual office, meet in virtual space and cooperate in workgroups. ATM and ISDN based teleconferencing will provide a real working tool for many. The ever increasing number of e-mail addresses and network connections is carrying us towards the so called 'global village'. The future merger between personal digital assistant and personal communication will be fascinating. Multi & HyperMedia technology is, like a part of VR, a powerful way to share and transfer information in a structured form. We do not need to put things in a serial form removing links because we can transfer knowledge as is. Another interesting and fundamental aspect typical of VR applications is the capability to change cognitive processes from secondary (symbolic - reconstructive) to primary (perceptive - motory). In this way we can learn by direct experience, by experiment as opposed to reading books. All these things will affect not only ways of working but also ways of studying and teaching. Digital communications, multimedia and VR will help students, multimedia titles will provide different kinds of information directly at home using text, images, video clips and sounds. Obviously all those things will not substitute human relationship as a multimedia title does not compete against a book but it helps.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9484
id	ddss9484
authors	Sklar, Hinda
year	1994
title	Opening Doors at Harvard's Graduate School of Design
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Design communication has many forms and employs a wide array of references. Design pedagogy uses a rich body of sources and is informed by deep communication between faculty and student. Advancing technology for distribution and manipulation of digital design media and a pervasive computer network at the Harvard Graduate School of Design provide an ideal environment for investigating new methods of access to design resources. A research initiative called the DOORS project (Design-Oriented On-line Resource System) will make a variety of design reference materials available over the GSD's computer network Potentially, DOORS will provide access to: - the Frances Loeb Library's visual and special collections; - slides, drawings, photographs, videos; - private faculty slide collections; - maps and geographic information systems of text, numeric and other visual databases of three- dimensional computer models; - computer-generated animations and digital video segments with sound of multimedia projects. As early pilot versions of DOORS are released, faculty and students will gather visual information for study and modification, analyze images and models, compare and link design documentation in different formats, develop lectures and make presentations from computers in offices, classrooms, and studio work areas. Emphasis will be placed on flexibility, as this particular tool's success will hinge on its ability to respond to different approaches to design and instruction. DOORS proposes to offer three modalities, browsing, composition and presentation, to enable searching, organizati-on, and display. Using established library standards for record format, subject access and keyword indexing, browsing will offer flexible and diverse search criteria. Composition will provide tools for linking, annotation and manipulation of assembled materials. Individual presentations will be viewed in classrooms, studios or offices. A pilot project to assemble some of the basic technology and expertise required is currently under way. The objective of the pilot is to deliver a slice of material over the GSD's local area network in order to raise awareness of the tool's potential among faculty and students, to evaluate its effectiveness, and to formulate technical specifications for later project phases.
series	DDSS
email
last changed	2003/08/07 16:36

_id	20ab
authors	Yakeley, Megan
year	2000
title	Digitally Mediated Design: Using Computer Programming to Develop a Personal Design Process
source	Massachusetts Institute of Technology, Department of Architecture
summary	This thesis is based on the proposal that the current system of architectural design education confuses product and process. Students are assessed through, and therefore concentrate on, the former whilst the latter is left in many cases to chance. This thesis describes a new course taught by the author at MIT for the last three years whose aim is to teach the design process away from the complexities inherent in the studio system. This course draws a parallel between the design process and the Constructionist view of learning, and asserts that the design process is a constant learning activity. Therefore, learning about the design process necessarily involves learning the cognitive skills of this theoretical approach to education. These include concrete thinking and the creation of external artifacts to develop of ideas through iterative, experimental, incremental exploration. The course mimics the Constructionist model of using the computer programming environment LOGO to teach mathematics. It uses computer programming in a CAD environment, and specifically the development of a generative system, to teach the design process. The efficacy of such an approach to architectural design education has been studied using methodologies from educational research. The research design used an emergent qualitative model, employing Maykut and Morehouses interpretive descriptive approach (Maykut & Morehouse, 1994) and Glaser and Strausss Constant Comparative Method of data analysis (Glaser & Strauss, 1967). Six students joined the course in the Spring 1999 semester. The experience of these students, what and how they learned, and whether this understanding was transferred to other areas of their educational process, were studied. The findings demonstrated that computer programming in a particular pedagogical framework, can help transform the way in which students understand the process of designing. The following changes were observed in the students during the course of the year: Development of understanding of a personalized design process; move from using computer programming to solve quantifiable problems to using it to support qualitative design decisions; change in understanding of the paradigm for computers in the design process; awareness of the importance of intrapersonal and interpersonal communication skills; change in expectations of, their sense of control over, and appropriation of, the computer in the design process; evidence of transference of cognitive skills; change from a Behaviourist to a Constructionist model of learning Thesis Supervisor: William J. Mitchell Title: Professor of Architecture and Media Arts and Sciences, School of Architecture and Planning
series	thesis:PhD
last changed	2003/02/12 22:37

_id	cbed
authors	Yakubu, G.S.
year	1994
title	Maximising the Benefits of CAD Systems in Architectural Education
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 228
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u8n
summary	The positive impact of Computer Aided Design (CAD) in professional architectural practice has been in focus in recent times but relatively little has been written on its significance in the education of the contemporary architect. It is common knowledge that the profession of architecture is currently undergoing enormous strains as it battles to keep abreast of trends and developments in a period of series of rapid advancement in science, technology and management (RIBA, 1992). Whilst attempts are being made to redress the shortcomings of the profession in the above context, the requirements for architectural education are yet to forge a coherent strategy for the implementation of CAD/IT in the curriculum of schools of architecture. In almost every other field, including engineering, medicine and the humanities, computing application to problem-solving and decision-making is seen as a way forward as we move into 21st century. Architectural education must integrate CAD/IT into the teaching of core modules that give the architect distinctive competence: studio design. That is one of the best ways of doing justice to the education of the architect of today and the future. Some approaches to the teaching of CAD in schools of architecture have been touched upon in the recent past. Building upon this background as well as an understanding of the nature of design teaching/learning, this paper examines ways of maximising the benefits of CAD systems in architectural education and of bringing computer aided designing into the studio not only to enhance design thinking and creativity but also to support interactive processes. In order to maximise or optimise any function, one approach is to use the hard systems methodology which utilises analytic, analogic and iconic models to show the effect of those factors which are significant for the purposes being considered. The other approach is to use the soft systems methodology in which the analysis encompasses the concept of a human activity system as a means of improving a situation. The use of soft systems methodology is considered more appropriate for dealing with the problem of design which is characterised by a flux of interacting events and ideas that unroll through time. The paper concludes that the main impediment to maximising the benefits of CAD systems in architectural education is not only the inappropriate definition of the objectives for the implementation of CAD education but also that the control subsystems are usually ill-structured and relatively poorly defined. Schools must attempt to define a coherent and consistent policy on the use of CAD systems as an integral part of studio design and evolve an in-house strategic and operational controls that enable the set objectives to be met. Furthermore, it is necessary to support the high level of productivity from CAD systems with a more efficient management system, especially in dealing with communication, data sharing via relational database, co-ordination and integration. Finally, the use of soft systems methodology is recommended as the way forward to optimising CAD systems in design education as it would provide continuous improvements while maintaining their productive value.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9401
id	ddss9401
authors	Akin, Omer
year	1994
title	Psychology of Early Design in Architecture
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Lately there has been a good deal of emphasis on the early stages of the design process, particularly by developers of computer aids and quantitative design models for both evaluation and generation of designs in a variety of domains. Yet, there is little understanding of the early design-process. While the early design process as manifested by human designers need not be the sole basis of the description of this phase, it certainly represents and important kernel of knowledge, especially for those who are interested in developing models, systems or merely interfaces for such systems. This paper focuses on the characterization of the psychology of the early design phase in architecture. It is described in terms of the general design strategies and problem solving tactics used; and is contrasted against some of the process characteristics that
series	DDSS
email
last changed	2003/08/07 16:36

_id	065b
authors	Beitia, S.S., Zulueta, A. and Barrallo, J.
year	1995
title	The Virtual Cathedral - An Essay about CAAD, History and Structure
source	Multimedia and Architectural Disciplines [Proceedings of the 13th European Conference on Education in Computer Aided Architectural Design in Europe / ISBN 0-9523687-1-4] Palermo (Italy) 16-18 November 1995, pp. 355-360
doi	https://doi.org/10.52842/conf.ecaade.1995.355
summary	The Old Cathedral of Santa Maria in Vitoria is the most representative building of the Gothic style in the Basque Country. Built during the XIV century, it has been closed to the cult in 1994 because of the high risk of collapse that presents its structure. This closure was originated by the structural analysis that was entrusted to the University of the Basque Country in 1992. The topographic works developed in the Cathedral to elaborate the planimetry of the temple revealed that many structural elements of great importance like arches, buttresses and flying buttresses were removed, modified or added along the history of Santa Maria. The first structural analysis made in the church suggested that the huge deformations showed in the resistant elements, specially the piers, were originated by interventions made in the past. A deep historical investigation allowed us to know how the Cathedral was built and the changes executed until our days. With this information, we started the elaboration of a virtual model of the Cathedral of Santa Maria. This model was introduced into a Finite Elements Method system to study the deformations suffered in the church during its construction in the XIV century, and the intervention made later in the XV, XVI and XX centuries. The efficiency of the virtual model simulating the geometry of the Cathedral along history allowed us to detect the cause of the structural damage, that was finally found in many unfortunate interventions along time.
series	eCAADe
more	http://dpce.ing.unipa.it/Webshare/Wwwroot/ecaade95/Pag_43.htm
last changed	2022/06/07 07:54

_id	ee23
authors	Bille, Pia
year	1994
title	A Study of Color
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 185-190
doi	https://doi.org/10.52842/conf.ecaade.1994.185
summary	Color courses are traditionally based on exercises carried out with either water color or colored paper. Use of the computer as a tool for teaching color theory and analyzing color in architecture was the topic of a course given at the School of Architecture and Planning at the State University of New York at Buffalo, USA where I was an exchange faculty in the academic year 1993/94. The course was structured into 3 topics: color theory, color perception and application of color.
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: