Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 363

Reformat results as: short short into frame detailed detailed into frame

_id	a743
authors	Laing, L. and Kraria, H.
year	1994
title	CAD as an Interface for Integrated Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w5h
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 235
summary	In the traditional approach to building design, the designer (usually the architect) produces a design (often quite detailed)in blueprint before handing this to the next member of the design team (engineer) to superimpose the structure, services etc. Often this proves so impractical that the initial proposal has to be referred back to the architect for revision, and the process repeated - and this cycle may be repeated many times. Such routines arise in building design because designers find collaboration among themselves difficult to control, the task of design integration ultimately falling upon the construction manager or the contractor. This is the most common cause of problems arising during the execution of the project on site, causing a delays in the construction process, and building failures which might only be detected after occupancy. As a test-bed for addressing this problem, a system of coordinated files is proposed for use by design-students (with a working knowledge of AutoCAD) during a design project. The aim is to related data (CAD information) across all students working on the same project but developing different aspects. Participating students will be drawn from a range of design specialisms. Each member accessing the same information while developing different aspects (e.g. structure, services, and cost modelling). This goes beyond the conventional use of 'XREF' (cross-referenced drawings) and involves each member accessing and working with the same dataset - e.g. using different layers, co-ordination is easier and the data better integrated - there is thereby a reduction of the amount of repetition as the need to redraw information is eliminated. References or an initial data-set is set up by the tutor and available for reference at any stage of design project. The technological aspects to support collaborative work (and in particular the interaction process in design) is the main thrust of the undergraduate degree in Building Design Engineering at the University of Strathclyde.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	eb5f
authors	Al-Sallal, Khaled A. and Degelman, Larry 0.
year	1994
title	A Hypermedia Model for Supporting Energy Design in Buildings
doi	https://doi.org/10.52842/conf.acadia.1994.039
source	Reconnecting [ACADIA Conference Proceedings / ISBN 1-880250-03-9] Washington University (Saint Louis / USA) 1994, pp. 39-49
summary	Several studies have discussed the limitations of the available CAAD tools and have proposed solutions [Brown and Novitski 1987, Brown 1990, Degelman and Kim 1988, Schuman et al 1988]. The lack of integration between the different tasks that these programs address and the design process is a major problem. Schuman et al [1988] argued that in architectural design many issues must be considered simultaneously before the synthesis of a final product can take place. Studies by Brown and Novitski [1987] and Brown [1990] discussed the difficulties involved with integrating technical considerations in the creative architectural process. One aspect of the problem is the neglect of technical factors during the initial phase of the design that, as the authors argued, results from changing the work environment and the laborious nature of the design process. Many of the current programs require the user to input a great deal of numerical values that are needed for the energy analysis. Although there are some programs that attempt to assist the user by setting default values, these programs distract the user with their extensive arrays of data. The appropriate design tool is the one that helps the user to easily view the principal components of the building design and specify their behaviors and interactions. Data abstraction and information parsimony are the key concepts in developing a successful design tool. Three different approaches for developing an appropriate CAAD tool were found in the literature. Although there are several similarities among them, each is unique in solving certain aspects of the problem. Brown and Novitski [1987] emphasize the learning factor of the tool as well as its highly graphical user interface. Degelman and Kim [1988] emphasize knowledge acquisition and the provision of simulation modules. The Windows and Daylighting Group of Lawrence Berkeley Laboratory (LBL) emphasizes the dynamic structuring of information, the intelligent linking of data, the integrity of the different issues of design and the design process, and the extensive use of images [Schuman et al 19881, these attributes incidentally define the word hypermedia. The LBL model, which uses hypermedia, seems to be the more promising direction for this type of research. However, there is still a need to establish a new model that integrates all aspects of the problem. The areas in which the present research departs from the LBL model can be listed as follows: it acknowledges the necessity of regarding the user as the center of the CAAD tool design, it develops a model that is based on one of the high level theories of human-computer interaction, and it develops a prototype tool that conforms to the model.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	1262
authors	Alshawi, M.
year	1994
title	A run time exchange of component information between CAD and object models: A standard interface
source	The Int. Journal of Construction IT 2(2), pp. 37-52
summary	Integrated computer aided design could only occur in engineering once CAD systems could represent physical features and components rather than graphical primitives. In most dedicated CAD systems, the knowledge of a complete component exists only for the duration of each drawing command and the data stored in the database is simply a set of graphic primitives. This paper proposes an approach for real time information transfer from and to CAD systems based on a high level object representation of the design drawing. Drawing components are automatically identified and represented in an object hierarchy that reflects the 'part-of' relation between the various components including building spaces. Such hierarchies transfer an industry standard CAD system i.e. AutoCAD, into a high level object oriented system that can communicate with external applications with relative ease.
series	journal paper
last changed	2003/05/15 21:45

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	0380
authors	Fenves, S., Flemming, U., Hendrickson, C., Maher, M., Quadrel, R., Terk, M. and Woodbury, R.
year	1994
title	Computer Integrated Building Design
source	Prentice-Hall, Inc., Englewood Cliffs, New jersey
summary	A guide to the principles and applications of computer integrated systems as applied to construction management. Computer-Integrated Building covers the fundamentals of construction project management, the design process for production and opportunities for CAD-integration.
series	other
last changed	2003/04/23 15:14

_id	6572
authors	Fioravanti, A., Le Rose, L. and Sgueglia della Marra, C.
year	1994
title	KAAD: A Didactical Experience
doi	https://doi.org/10.52842/conf.ecaade.1994.x.w3w
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 257
summary	Students in the last year of their course in Building Engineering in the "La Sapienza" University of Rome study questions of architectural design of considerable complexity, since they are characterised by a marked degree of multi-disciplinary work. In the preceding years, the students acquire specialist notions in the fields of thermal behaviour of buildings, technological equipment, static security, architectural composition, programming and costs, technical and constructional details, and so on. However, there is a need for integration at design level of the disciplines learned. At the CAAD Laboratory of the Department of Technical Architecture and Town-planning Technique, with the contribution of the National Research Council, a software known as KAAD (Knowledge-based Assistant for Architectural Design) has been devised, with the aim of providing an effective aid to the activity of design.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9429
id	ddss9429
authors	Geerling, Heinrich
year	1994
title	A Proposal for a Framework for Business Re-engineering in Design and Realization of Artificial Environments
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	According to the Top-Down design process', this paper gives a generic and qualitative description of a Concurrent Engineering Environment, that should support the problem solving procedure in town planning and architecture in a modern quality oriented society. A system that is based on the principal of democracy might guarantee the preservation of quality in the projection and realization of artificial environments. This environment can be seen as a part of the today often discussed "digital democracy", which practically is based on a infrastructure of computers, interfaces, software systems, a network, databases and a data presentation, that is able to comprise the expectations of professionals involved in the architecture and town planning process. The paper will discuss what the role of the designer and coordinator of this computer environment looks like,in order to design, plan, build and coordinate activities for the realization of this Concurrent Environment and how several software engineers work concurrently to develop tools that guarantee a modular integration. The backbone of this environment is the definition and use of standards for data exchange. Basically those standards are derived from two domains: artifacts will be described in a product model data, while natural resources are described in spatial data. Town planning has to integrate both models. It will be discussed briefly how far the data modelling language EXPRESS of part 11 of the ISO 10303 (Express Language Reference Manual) might be useful to model GIS related problems. An example will describe how a scenario of activities, from registration of real world data to recognition of requirements of society, the definition of development plans through design(competition), lawfulness checking and construction until demolition should look like.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddss9444
id	ddss9444
authors	Hill, Shauna and Streilein, André
year	1994
title	Architectural Photogrammetry & Knowledge-Base Systems Record & Redevelopment
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	In redevelopment projects, the purpose of heritage recording is part of an investigative process to achieve understanding about structures so that designers can make the appropriate design decisions. It is desirable to integrate the knowledge of the recording and documentation specialist, who has first-hand knowledge of the building, with the interpretative process of evaluating the building information and making design decisions. New developments in the fields of photogram-metric recording and computer science has led to improved "image understanding". This paper describes research that is the result of exploring the concept of integrating new digital photogram-metric recording processes with an automated expert evaluation tool. The goal of this research is to expedite the acquisition of heritage building information for use by a knowledge-based system capable of providing the designer with building performance evaluations. Photogrammetry records all data as a series of three-dimensional coordinates which make it a natural partner for today's three-dimensional CAD systems. Generating a three-dimensional model of architecturally significant physical forms and details can provide a basis for evaluation, understanding, education, and design. The purpose of knowledge-based systems in construction is to enhance the decision-making process with specialized knowledge and experience. The linkage of CAD databases with knowledge-based systems provides a source of input data, such as a three-dimensional model, significant to a particular problem. This research is a collaborative effort between two groups, the Swiss Federal Institute of Technology in Zurich Switzerland, and the University of Manitoba in Winnipeg, Canada.
series	DDSS
last changed	2003/08/07 16:36

_id	6f5d
authors	Koutamanis, A., Bridges A.H. and Van Loon, P.P.
year	1994
title	C-ad hoc Education
doi	https://doi.org/10.52842/conf.ecaade.1994.039
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 39-42
summary	In the framework of an evolving curriculum we have been developing a series of CAAD exercises aimed at providing the basic knowledge and skills a student needs. The series formed initially a conventional sequence that mapped design stages and corresponded with the gradual development of knowledge and skills. Due to originally practical reasons we are currently relaxing the sequential structure of the CAAD curriculum. This gives us the opportunity to experiment with the integration of the CAAD exercises in the wider design activities of the students, as well as with the structure of the exercises themselves as fully self-contained units.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	diss_kuo
id	diss_kuo
authors	Kuo, C.J.
year	1999
title	Unsupervised Dynamic Concurrent Computer-Aided Design Assistant
source	Los Angeles: UCLA
summary	The increasing capability of computer-aided architectural design systems has strengthened the role that the computer plays in the workplace. Due to the complexity of developing new techniques and research, these systems are undertaken mostly by scientists and engineers without significant architectural input (Willey, 1991). The design concept of these systems may be based on a well-defined and well-understood process, which is not yet realized in architectural design (Galle, 1994). The output of such research may not be easily adapted into the design process. Most of the techniques assume a complete understanding of the design space (Gero and Maher, 1987) (Willey, 1991). The description or construction of the design space is always time and space consuming, and the result can never be complete due to the ever-changing nature of architectural design. This research intends to initiate a solution for the above problems. The proposed system is an unsupervised-dynamic-concurrent-computer-aided-design assistant. The “unsupervised” means the learning process is not supervised by the user because it is against the designer's nature to “think-aloud” in the design studio and it also increases the work load. It is dynamic because the size of the knowledge base is constantly changing. Concurrent means that there are multiple procedures active simultaneously. This research focuses on learning the operational knowledge from an individual designer and reapplying it in future designs. A computer system for this experiment is constructed. It is capable of The preliminary result shows a positive feedback from test subjects. The purpose of this research is to suggest a potent computational frame within which future developments may flourish.
series	thesis:PhD
last changed	2003/11/28 07:37

_id	2e74
authors	Liebich, Thomas
year	1994
title	Behind the Lines - Managing Semantically Rich Data in Architecture
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u5d
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 253
summary	Current CAD systems have inherent bottlenecks, which diminish possible achievements for architectural practices. Among these shortcomings there are two the paper will deal with. Firstly, traditional CAD relies on a pure geometric model. All non-geometric information about objects of architectural interest has to be attached to these geometric entities. This restricts the ability to describe semantically dependent relationships. Secondly, the integration of different design tools for building and construction is still at its very beginning. The data exchange remains restricted, since it is based on a fairly low semantic level of a document-based exchange of information, such as geometric representation in DXF or IGES, rather than on a high semantic level of a model-based exchange.
series	eCAADe
last changed	2022/06/07 07:50

_id	ddss9476
id	ddss9476
authors	Porada, Mikhael and Porada, Sabine
year	1994
title	"To See Ideas" or The Visualizing of Programmatic Data Reading Examples in Architecture and Town Planning
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Whether images are still in the mind, metaphors, sketches or icons, they play a crucial role. They have always been the heuristic pivot around which the process of artefact design organizes itself, particularly in architecture and town-planning. "To see ideas" through computer ideograms is to experiment an interesting and new direction for "pictural approach" supported design. Cognitive psychology emphasizes the important part played by mental images in reasoning, imagination in the working of human intelligence and the construction of mental images as cognitive factors underlying reasoning. It also points out how close computerized objects and mental schemata are. "To reason over a situation is first to remember or build some mental models of this situation; second to make those models work or simulate them in order to observe what would happen in different circumstances and then verify whether they fit the experiment data; third to select the best model, a tool meant to sustain and amplify the elaboration of mental models, which is a spontaneous activity". We introduce our exploration of the direct transmission of mental models through computer ideograms. We study the "operative" and the "expressive" aspects, and this allows us to analyze how some aspects in a field of knowledge are represented by ideograms, schemata, icons, etc. Aid to imagination, reasoning and communication by means of a graphic language must be limited to some figurative relevant aspects of the domain considered; it should not aim at a realistic simulation. Therefore, the important role played by icons and the spatial schematic representation of knowledge is emphasized. Our hypothesis is that an architectural concept does not result from an inductive process, but rather is built to solve problems through the direct representation of ideas with ideograms. An experiment was conducted with a graphic language, a dynamic scenography and actor-objects. The language allows one to build and visualize models from the various domains of knowledge of the object. The dynamic scenography can explore and simulate kinetically those models by means of staging various narrations and visual scenarios. The actor-objects play various and complementary parts in order to make the image explicit and link it with the concept. We distinguish between two parallel levels of reality in computer ideographics: one concerns the model, it represents the visualization of a graphic model at a particular moment and according to a particular representation, the other concerns the ideogram.
series	DDSS
last changed	2003/08/07 16:36

_id	90e3
authors	Reinschmidt, K. and Finn, G.A.
year	1994
title	Smarter computer-aided design
source	IEEE Expert, Vol. 9, No. 4, pp. 50-55
summary	CAD systems with embedded, integrated knowledge-based components can make users more productive by leveraging knowledge about the design, engineering, and manufacture of the system or part being designed. We discuss some of the results of our experience, including the embedding of a knowledge-based systems tool in three commercial CAD systems using a special integration software program. This software, called Stonerule, acts as an integration mechanism between the CAD system and the knowledge-based design application.
series	journal paper
last changed	2003/04/23 15:14

_id	daff
authors	Richens, P.
year	1994
title	CAD Research at the Martin Centre
source	Automation in Construction, No. 3
summary	The Martin Centre CADLAB has recently been established to investigate software techniques that could be of practical importance to architects within the next five years. In common with most CAD researchers, we are interested in the earlier, conceptual, stages of design, where commercial CAD systems have had little impact. Our approach is not Knowledge-Based, but rather focuses on using the computer as a medium for design and communication. This leads to a concentration on apparently superficial aspects such as visual appearance, the dynamics of interaction, immediate feedback, plasticity. We try to avoid building-in theoretical attitudes, and to reduce the semantic content of our systems to a low level on the basis that flexibility and intelligence are inversely related; and that flexibility is more important. The CADLAB became operational in January 1992. First year work in three areas – building models, experiencing architecture, and making drawings – is discussed.
series	journal
email
more	http://www.arct.cam.ac.uk/research/pubs/pdfs/rich94a.pdf
last changed	2000/03/05 19:05

_id	79f8
authors	Rieber, L.
year	1994
title	Computers Graphics, and Learning
source	Brown & Benchmark, Madison
summary	The first of the topics begins with an overview of instructional computer graphics. This leads into an overview of the status of instructional visual research including discussions on visual perception, visual cognition, and theories on storing visual information in short-term and long-term memory. More practical application information is found in the next few chapters covering when and how static and animated graphics should be integrated into computer based instruction. The book concludes with a consideration of the role visuals play with multimedia. The useful information of each chapter is delivered with a cautious and wise nature. Rieber introduces his book with the first principle of instructional graphics, which I found to be very insightful. It reads, "There are times when pictures can aid learning, times when pictures do not aid learning but do no harm, and times when pictures do not aid learning and are distracting." The general premise throughout the book is that learning is paramount and should take center stage. He further warns the instructional designer about becoming "technocentric" (this is where technology dictates decision making) and recommends that media decisions not be made untilother instructional decisions are made. Again and again, from chapter to chapter, the reader is reminded of this underlying premise which made this book particularly effective. Another strength was the comprehensive nature of the book. There was an excellent balance of theory, research, and application to ensure the reader will gain the knowledge for appropriate integration of graphics into instructional materials. The theoretical information covers the role of visuals in communication and education, quoting many research sources for validation. There is an overview of three types of instructional graphics (representational, analogical, and arbitrary) and an analysis of their possible use in Gagneís domains of learning. Rieber states that the design of instructional graphics is strongly influenced by the inter-relationships and interdependency of the five domains. To help the reader choose the correct graphic for the job intended, a section describing the five applications of instructional graphics (cosmetic, motivation, attention-gaining, presentation, and practice) is included. It is recognized that these applications originated from Gagne's nine events of instruction.
series	other
last changed	2003/04/23 15:14

_id	8155
authors	Vásquez de Velasco, Guillermo and Angulo, Antonieta
year	1994
title	CAAD-CAAI Integration by Means of High-Impact Small-Scale R&D Projects
doi	https://doi.org/10.52842/conf.ecaade.1994.127
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, pp. 127-134
summary	Pointing towards the ultimate goal of instrumental integration between our instructional and professional environments, the paper deals with the articulation of small scale R&D projects that, due to their consistency with main-stream tendencies, can have considerable impact on allowing people, institutions and enterprises to perform a relevant role in our dynamics of "Continuing Professional Development" and "Practice-Based Learning". The paper presents the results of a European Union R&D Project that aims to empower small and medium size enterprises of the building sector with the knowledge needed for the development of multimedia programmes with pedagogical value. The paper is explicit on addressing not only the achievements but also the difficulties that the consortium of European partners had to face, and makes reference to a future spin-off project that follows the same tactical approach.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	cbed
authors	Yakubu, G.S.
year	1994
title	Maximising the Benefits of CAD Systems in Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.1994.x.u8n
source	The Virtual Studio [Proceedings of the 12th European Conference on Education in Computer Aided Architectural Design / ISBN 0-9523687-0-6] Glasgow (Scotland) 7-10 September 1994, p. 228
summary	The positive impact of Computer Aided Design (CAD) in professional architectural practice has been in focus in recent times but relatively little has been written on its significance in the education of the contemporary architect. It is common knowledge that the profession of architecture is currently undergoing enormous strains as it battles to keep abreast of trends and developments in a period of series of rapid advancement in science, technology and management (RIBA, 1992). Whilst attempts are being made to redress the shortcomings of the profession in the above context, the requirements for architectural education are yet to forge a coherent strategy for the implementation of CAD/IT in the curriculum of schools of architecture. In almost every other field, including engineering, medicine and the humanities, computing application to problem-solving and decision-making is seen as a way forward as we move into 21st century. Architectural education must integrate CAD/IT into the teaching of core modules that give the architect distinctive competence: studio design. That is one of the best ways of doing justice to the education of the architect of today and the future. Some approaches to the teaching of CAD in schools of architecture have been touched upon in the recent past. Building upon this background as well as an understanding of the nature of design teaching/learning, this paper examines ways of maximising the benefits of CAD systems in architectural education and of bringing computer aided designing into the studio not only to enhance design thinking and creativity but also to support interactive processes. In order to maximise or optimise any function, one approach is to use the hard systems methodology which utilises analytic, analogic and iconic models to show the effect of those factors which are significant for the purposes being considered. The other approach is to use the soft systems methodology in which the analysis encompasses the concept of a human activity system as a means of improving a situation. The use of soft systems methodology is considered more appropriate for dealing with the problem of design which is characterised by a flux of interacting events and ideas that unroll through time. The paper concludes that the main impediment to maximising the benefits of CAD systems in architectural education is not only the inappropriate definition of the objectives for the implementation of CAD education but also that the control subsystems are usually ill-structured and relatively poorly defined. Schools must attempt to define a coherent and consistent policy on the use of CAD systems as an integral part of studio design and evolve an in-house strategic and operational controls that enable the set objectives to be met. Furthermore, it is necessary to support the high level of productivity from CAD systems with a more efficient management system, especially in dealing with communication, data sharing via relational database, co-ordination and integration. Finally, the use of soft systems methodology is recommended as the way forward to optimising CAD systems in design education as it would provide continuous improvements while maintaining their productive value.
series	eCAADe
last changed	2022/06/07 07:50

_id	dda4
authors	Yezioro, Abraham
year	1994
title	Form and Performance in Intelligent CAAD Systems for Early Stages in Solar Design Building
source	Technion, Faculty of Architecture and Town Planing, Haifa
summary	Great care should be taken at the initial design stages to determine the principles and solution schemes for climate and energy-conscious buildings. The present study deals with supporting the designer's efforts at the early stages to lay down the appropriate principles for a conceptual and geometric design of energy-preserving buildings, which are also thermally comfortable and adapted to local climatic conditions. For years, especially during the last decade, important data concerning climate-conscious construction has been compiled, but the information has not been utilized by designers, due to its inaccessibility. It is significant, though, that solutions based on this knowledge could be found and assessed at the preliminary design steps. A correct climate-conscious design conceived at the initial stages may guarantee that during later phases of the project's development no problems calling for essential and drastic changes in the basic design will crop up. The meaning of such changes at later stages may require sometimes a redesigning of the entire project. It is vital, therefore, to understand at the pre-conceptual phase, what are the correct climatic-solar design strategies which satisfy the requirements of the local conditions, and enable the attainment of thermal comfort conditions, while consuming the least possible energy. The present study proposes a computer-aided passive solar design system (PASYS) which enables the handling of entire designing process, and its general, conceptual aspects, as well as the preliminary designing steps and their particular, practical aspects. The system is based both on a knowledge base which stores the existing information concerning solar-climatic construction in the form of rules of thumb, and on precise procedural models which enable finding solutions suited to the local climatic conditions. The proposed system is an intelligent CAAD system which equips the designer who is aware of the constraints of climate and energy, with a tool to achieve a better design. PASYS was developed as a universal system to deal with the various activities involved in the initial – pre-conceptual and conceptual - design stages. The system supports the following design activities of each stage of this kind: analysis, synthesis, documentation, assessment and decision making. It is capable of analyzing given conditions, thus helping the designer understand which are the significant preliminary design stages that have a bearing on thermal comfort conditions in a given climate. The system is also capable of proposing solutions corresponding with the particular design phase, and assess their adequacy. These solutions take into account the constraints determined both by the designer and by the system itself, owing to the knowledge base it contains. The system can also document the various solutions that have been found and selected, so that may be further developed at later stages. This documentation is carried out by a graphic interface, developed as part of the system, as well as by an interface devised for existing CAD software. This study highlights the interaction between form and performance. The system is able to assess the performance of a proposed design by considering a given geometry (form), or viceversa, it is able to recommend a solution that can deliver desired and required performances. The study comprises three parts: (a.) Development of the conceptual model of a knowledge based design process. (b.) Further development of the initial stages of the afore mentioned process, including the pre-conceptual and conceptual stages. (c.) Demonstration of the mode of work with the PASYS system. // The first part of the study deals with the definition of the design process, the definition of the various design steps and their characteristics, and the definition of the activities involved in each design step. This part of the work also presents the kinds of knowledge bases affecting the design process, and shows how this knowledge is an inseparable part of the design process. The second part deals with the development of the initial design stages - the pre-conceptual and the conceptual - which are based on knowledge. This part also contains compiled knowledge that is relevant to the design stage, and a knowledge storage and retrieval method that was developed so as to make the knowledge available and accessible on demand. This part further presents precise procedural methods, developed to find solutions adapted to the specific given conditions, and to precisely assess the performance of the proposed solution. A case in point is the module of the SHADING system which enables a precise assessment of the mutual shading of buildings, and an examination of the exposure of the southern elevation to the sun, which is necessary in order to determine the effective solar absorption area in a proposed project in given environment conditions. The third part of the study demonstrates the solar-climatic design process put into action and supported by the system that was developed. This system enables the designer, even at the preliminary design stages, to determine which properties relating to local climatic conditions he will introduce into the building. This important, seemingly natural act, is usually performed during more advanced stages, when it might generate significant changes in the design, at a juncture when changes are hard to make. A PASYS-aided design environment ensures that from the beginning of the designing process, the project will be designed correctly and efficiently as far as energy is concerned.
keywords	Knowledge Base; Design Process; Form; Performance; CAAD Systems
series	thesis:PhD
email
last changed	2003/03/03 11:58

_id	b9c4
authors	Kim, Inhan
year	1994
title	Data representations in an integrated architectural design environment
source	University of Strathclyde, Dept. of Architecture and Building Science
summary	The architectural design process is very complex and involves cross-disciplinary communication among many related fields. Given the further problems arising from the technological advances in building materials and construction methods, an integrated design environment becomes a central design issue. There have been many attempts to analyse and structure the design process as a uniform hierarchical framework. Most of the attempts resulted in a vague and inappropriate outcome due to the lack of understanding of architectural design complexity and inconsistent design data control sequence. A design problem cannot be comprehensively stated because the design problem has a multi-disciplinary nature and the design problem itself evolves as solutions are attempted by the designer. Therefore, an ideal CAAD system should have the capability to accommodate the multi-disciplinary nature of design and should not prescribe or restrict design concepts and design knowledge. A well designed integrated design environment provides more information and invokes creative imagination for each design stage, and therefore creative decision making by the designer can be achieved. This thesis proposes a prototype architectural design environment, Hybrid Integrated Design Environment [HIDE], which aims to integrate all applications for designing a building. Within the object-oriented design environment, a unified data model and a data management system have been implemented to seamlessly connect all applications. Development of the environment needs to consider the fundamental interaction between each module. Devising a data structure that is appropriate to an effective data communication among the various design stages is essential in a totally integrated CAAD system. The suggested unified data model organizes the structure of the design data to keep the design consistent throughout the design and construction process. By means of the unified data model, integrated CAAD systems could represent and exchange design information at a semantic level, i.e. the user’s way of thinking, such as exchanging components and features of a building rather than graphical primitives. In consequence, the unified data model reduces the misunderstandings and communication problems among the multiple disciplines of architectural design. The suggested data management system supports the consistent and straight forward mechanisms for controlling the data representation through the inter-connected modules. It is responsible for creating, maintaining, and viewing a consistent database of the design description. It also helps to perform effective data communication among the various design stages to ensure quality and time saving in the final construction of the building. To support inter-disciplinary communication of design concepts and decisions, the integrating of relevant CAAD tools is essential. In the environment, the integration of CAAD tools has been performed on the basis of how well computerized design tools can assist designers to develop better solutions, enabling them to manipulate and appraise varying solutions quickly and with a minimum of effort in an environment conducive to creative design. A well designed user interface system can also benefit the seamless working environment. The proposed user friendly interface system allows a user to explore the environment in a highly interactive manner. From the development of the early data model to the final design, a user could benefit from the prototypes and methods of the user interface system. The ultimate goal of the prototype environment is to suggest a future design environment which helps the architect to have minimum discontinuity in his creativity and make the design process similar to the natural design process with the help of a set of design assistance modules. A prototype version of HIDE has been implemented and a demonstration of the environment is part of this thesis.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ddss9401
id	ddss9401
authors	Akin, Omer
year	1994
title	Psychology of Early Design in Architecture
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	Lately there has been a good deal of emphasis on the early stages of the design process, particularly by developers of computer aids and quantitative design models for both evaluation and generation of designs in a variety of domains. Yet, there is little understanding of the early design-process. While the early design process as manifested by human designers need not be the sole basis of the description of this phase, it certainly represents and important kernel of knowledge, especially for those who are interested in developing models, systems or merely interfaces for such systems. This paper focuses on the characterization of the psychology of the early design phase in architecture. It is described in terms of the general design strategies and problem solving tactics used; and is contrasted against some of the process characteristics that
series	DDSS
email
last changed	2003/08/07 16:36

For more results click below: